| Message ID | 1399374372-29123-5-git-send-email-rogerq@ti.com |
|---|---|
| State | New |
| Headers | show |
On Tue, May 06, 2014 at 02:06:09PM +0300, Roger Quadros wrote: > Switch to using the Type-B Multi-Touch protocol. > Henrik, any chance you could take a look at MT-B support? > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++-------- > 1 file changed, 94 insertions(+), 31 deletions(-) > > diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c > index 8a7da61..1b6e4e5 100644 > --- a/drivers/input/touchscreen/pixcir_i2c_ts.c > +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c > @@ -23,9 +23,12 @@ > #include <linux/slab.h> > #include <linux/i2c.h> > #include <linux/input.h> > +#include <linux/input/mt.h> > #include <linux/input/pixcir_ts.h> > #include <linux/gpio.h> > > +#define PIXCIR_MAX_SLOTS 2 > + > struct pixcir_i2c_ts_data { > struct i2c_client *client; > struct input_dev *input; > @@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data { > bool running; > }; > > -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) > +struct pixcir_touch { > + int x; > + int y; > +}; > + > +struct pixcir_report_data { > + int num_touches; > + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; > +}; > + > +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, > + struct pixcir_report_data *report) > { > - struct pixcir_i2c_ts_data *tsdata = data; > u8 rdbuf[10], wrbuf[1] = { 0 }; > + u8 *bufptr; > u8 touch; > - int ret; > + int ret, i; > + > + memset(report, 0, sizeof(struct pixcir_report_data)); > > ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); > if (ret != sizeof(wrbuf)) { > @@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) > return; > } > > - touch = rdbuf[0]; > - if (touch) { > - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; > - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; > - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; > - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; > - > - input_report_key(tsdata->input, BTN_TOUCH, 1); > - input_report_abs(tsdata->input, ABS_X, posx1); > - input_report_abs(tsdata->input, ABS_Y, posy1); > - > - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); > - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); > - input_mt_sync(tsdata->input); > - > - if (touch == 2) { > - input_report_abs(tsdata->input, > - ABS_MT_POSITION_X, posx2); > - input_report_abs(tsdata->input, > - ABS_MT_POSITION_Y, posy2); > - input_mt_sync(tsdata->input); > - } > - } else { > - input_report_key(tsdata->input, BTN_TOUCH, 0); > + touch = rdbuf[0] & 0x7; > + if (touch > PIXCIR_MAX_SLOTS) > + touch = PIXCIR_MAX_SLOTS; > + > + report->num_touches = touch; > + bufptr = &rdbuf[2]; > + > + for (i = 0; i < touch; i++) { > + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; > + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; > + > + bufptr = &bufptr[4]; > } > +} > + > +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, > + struct pixcir_report_data *report) > +{ > + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; > + int slots[PIXCIR_MAX_SLOTS]; > + struct pixcir_touch *touch; > + int n, i, slot; > + struct device *dev = &ts->client->dev; > > - input_sync(tsdata->input); > + n = report->num_touches; > + if (n > PIXCIR_MAX_SLOTS) > + n = PIXCIR_MAX_SLOTS; > + > + for (i = 0; i < n; i++) { > + touch = &report->touches[i]; > + pos[i].x = touch->x; > + pos[i].y = touch->y; > + } > + > + input_mt_assign_slots(ts->input, slots, pos, n); > + > + for (i = 0; i < n; i++) { > + touch = &report->touches[i]; > + slot = slots[i]; > + > + input_mt_slot(ts->input, slot); > + input_mt_report_slot_state(ts->input, > + MT_TOOL_FINGER, true); > + > + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); > + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); > + > + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", > + i, slot, touch->x, touch->y); > + } > + > + input_mt_sync_frame(ts->input); > + input_sync(ts->input); > } > > static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) > { > struct pixcir_i2c_ts_data *tsdata = dev_id; > const struct pixcir_ts_platform_data *pdata = tsdata->chip; > + struct pixcir_report_data report; > > while (tsdata->running) { > - pixcir_ts_poscheck(tsdata); > - > - if (gpio_get_value(pdata->gpio_attb)) > + /* parse packet */ > + pixcir_ts_parse(tsdata, &report); > + > + /* report it */ > + pixcir_ts_report(tsdata, &report); > + > + if (gpio_get_value(pdata->gpio_attb)) { > + if (report.num_touches) { > + /* > + * Last report with no finger up? > + * Do it now then. > + */ > + input_mt_sync_frame(tsdata->input); > + input_sync(tsdata->input); > + } > break; > + } > > msleep(20); > } > @@ -333,6 +389,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); > input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); > > + error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, > + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); > + if (error) { > + dev_err(dev, "Error initializing Multi-Touch slots\n"); > + return error; > + } > + > input_set_drvdata(input, tsdata); > > error = devm_gpio_request_one(dev, pdata->gpio_attb, > -- > 1.8.3.2 >
Hi Roger, Thanks for the patch series. I think the patch looks great in general. Please see some minor comments below. On 05/06/2014 01:06 PM, Roger Quadros wrote: > Switch to using the Type-B Multi-Touch protocol. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++-------- > 1 file changed, 94 insertions(+), 31 deletions(-) > > diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c > index 8a7da61..1b6e4e5 100644 > --- a/drivers/input/touchscreen/pixcir_i2c_ts.c > +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c > @@ -23,9 +23,12 @@ > #include <linux/slab.h> > #include <linux/i2c.h> > #include <linux/input.h> > +#include <linux/input/mt.h> > #include <linux/input/pixcir_ts.h> > #include <linux/gpio.h> > > +#define PIXCIR_MAX_SLOTS 2 > + > struct pixcir_i2c_ts_data { > struct i2c_client *client; > struct input_dev *input; > @@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data { > bool running; > }; > > -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) > +struct pixcir_touch { > + int x; > + int y; > +}; > + > +struct pixcir_report_data { > + int num_touches; > + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; > +}; > + > +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, > + struct pixcir_report_data *report) > { > - struct pixcir_i2c_ts_data *tsdata = data; > u8 rdbuf[10], wrbuf[1] = { 0 }; > + u8 *bufptr; > u8 touch; > - int ret; > + int ret, i; > + > + memset(report, 0, sizeof(struct pixcir_report_data)); > > ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); > if (ret != sizeof(wrbuf)) { > @@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) > return; > } > > - touch = rdbuf[0]; > - if (touch) { > - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; > - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; > - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; > - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; > - > - input_report_key(tsdata->input, BTN_TOUCH, 1); > - input_report_abs(tsdata->input, ABS_X, posx1); > - input_report_abs(tsdata->input, ABS_Y, posy1); > - > - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); > - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); > - input_mt_sync(tsdata->input); > - > - if (touch == 2) { > - input_report_abs(tsdata->input, > - ABS_MT_POSITION_X, posx2); > - input_report_abs(tsdata->input, > - ABS_MT_POSITION_Y, posy2); > - input_mt_sync(tsdata->input); > - } > - } else { > - input_report_key(tsdata->input, BTN_TOUCH, 0); > + touch = rdbuf[0] & 0x7; > + if (touch > PIXCIR_MAX_SLOTS) > + touch = PIXCIR_MAX_SLOTS; > + > + report->num_touches = touch; > + bufptr = &rdbuf[2]; > + > + for (i = 0; i < touch; i++) { > + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; > + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; > + > + bufptr = &bufptr[4]; > } > +} In many places, the '&ptr[index]' form makes a lot of sense, but here, it would have been clearer to use 'bufptr += 4'. > + > +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, > + struct pixcir_report_data *report) > +{ > + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; > + int slots[PIXCIR_MAX_SLOTS]; > + struct pixcir_touch *touch; > + int n, i, slot; > + struct device *dev = &ts->client->dev; > > - input_sync(tsdata->input); > + n = report->num_touches; > + if (n > PIXCIR_MAX_SLOTS) > + n = PIXCIR_MAX_SLOTS; > + > + for (i = 0; i < n; i++) { > + touch = &report->touches[i]; > + pos[i].x = touch->x; > + pos[i].y = touch->y; > + } > + > + input_mt_assign_slots(ts->input, slots, pos, n); > + > + for (i = 0; i < n; i++) { > + touch = &report->touches[i]; > + slot = slots[i]; > + > + input_mt_slot(ts->input, slot); > + input_mt_report_slot_state(ts->input, > + MT_TOOL_FINGER, true); > + > + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); > + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); > + > + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", > + i, slot, touch->x, touch->y); > + } > + > + input_mt_sync_frame(ts->input); > + input_sync(ts->input); > } > > static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) > { > struct pixcir_i2c_ts_data *tsdata = dev_id; > const struct pixcir_ts_platform_data *pdata = tsdata->chip; > + struct pixcir_report_data report; > > while (tsdata->running) { > - pixcir_ts_poscheck(tsdata); > - > - if (gpio_get_value(pdata->gpio_attb)) > + /* parse packet */ > + pixcir_ts_parse(tsdata, &report); > + > + /* report it */ > + pixcir_ts_report(tsdata, &report); > + > + if (gpio_get_value(pdata->gpio_attb)) { > + if (report.num_touches) { > + /* > + * Last report with no finger up? > + * Do it now then. > + */ > + input_mt_sync_frame(tsdata->input); > + input_sync(tsdata->input); I think this construct is alright for this particular patch. If anything, it points at a need for a better model of interrupted contacts in the core. > + } > break; > + } > > msleep(20); > } > @@ -333,6 +389,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); > input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); > > + error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, > + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); > + if (error) { > + dev_err(dev, "Error initializing Multi-Touch slots\n"); > + return error; > + } > + > input_set_drvdata(input, tsdata); > > error = devm_gpio_request_one(dev, pdata->gpio_attb, > Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Thanks, Henrik -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Henrik, On 05/19/2014 10:04 AM, Henrik Rydberg wrote: > Hi Roger, > > Thanks for the patch series. I think the patch looks great in general. Please > see some minor comments below. > > On 05/06/2014 01:06 PM, Roger Quadros wrote: >> Switch to using the Type-B Multi-Touch protocol. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> --- >> drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++-------- >> 1 file changed, 94 insertions(+), 31 deletions(-) >> >> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c >> index 8a7da61..1b6e4e5 100644 >> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c >> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c >> @@ -23,9 +23,12 @@ >> #include <linux/slab.h> >> #include <linux/i2c.h> >> #include <linux/input.h> >> +#include <linux/input/mt.h> >> #include <linux/input/pixcir_ts.h> >> #include <linux/gpio.h> >> >> +#define PIXCIR_MAX_SLOTS 2 >> + >> struct pixcir_i2c_ts_data { >> struct i2c_client *client; >> struct input_dev *input; >> @@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data { >> bool running; >> }; >> >> -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) >> +struct pixcir_touch { >> + int x; >> + int y; >> +}; >> + >> +struct pixcir_report_data { >> + int num_touches; >> + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; >> +}; >> + >> +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, >> + struct pixcir_report_data *report) >> { >> - struct pixcir_i2c_ts_data *tsdata = data; >> u8 rdbuf[10], wrbuf[1] = { 0 }; >> + u8 *bufptr; >> u8 touch; >> - int ret; >> + int ret, i; >> + >> + memset(report, 0, sizeof(struct pixcir_report_data)); >> >> ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); >> if (ret != sizeof(wrbuf)) { >> @@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) >> return; >> } >> >> - touch = rdbuf[0]; >> - if (touch) { >> - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; >> - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; >> - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; >> - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; >> - >> - input_report_key(tsdata->input, BTN_TOUCH, 1); >> - input_report_abs(tsdata->input, ABS_X, posx1); >> - input_report_abs(tsdata->input, ABS_Y, posy1); >> - >> - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); >> - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); >> - input_mt_sync(tsdata->input); >> - >> - if (touch == 2) { >> - input_report_abs(tsdata->input, >> - ABS_MT_POSITION_X, posx2); >> - input_report_abs(tsdata->input, >> - ABS_MT_POSITION_Y, posy2); >> - input_mt_sync(tsdata->input); >> - } >> - } else { >> - input_report_key(tsdata->input, BTN_TOUCH, 0); >> + touch = rdbuf[0] & 0x7; >> + if (touch > PIXCIR_MAX_SLOTS) >> + touch = PIXCIR_MAX_SLOTS; >> + >> + report->num_touches = touch; >> + bufptr = &rdbuf[2]; >> + >> + for (i = 0; i < touch; i++) { >> + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; >> + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; >> + >> + bufptr = &bufptr[4]; >> } >> +} > > In many places, the '&ptr[index]' form makes a lot of sense, but here, it would > have been clearer to use 'bufptr += 4'. Agreed. I'll update it. > >> + >> +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, >> + struct pixcir_report_data *report) >> +{ >> + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; >> + int slots[PIXCIR_MAX_SLOTS]; >> + struct pixcir_touch *touch; >> + int n, i, slot; >> + struct device *dev = &ts->client->dev; >> >> - input_sync(tsdata->input); >> + n = report->num_touches; >> + if (n > PIXCIR_MAX_SLOTS) >> + n = PIXCIR_MAX_SLOTS; >> + >> + for (i = 0; i < n; i++) { >> + touch = &report->touches[i]; >> + pos[i].x = touch->x; >> + pos[i].y = touch->y; >> + } >> + >> + input_mt_assign_slots(ts->input, slots, pos, n); >> + >> + for (i = 0; i < n; i++) { >> + touch = &report->touches[i]; >> + slot = slots[i]; >> + >> + input_mt_slot(ts->input, slot); >> + input_mt_report_slot_state(ts->input, >> + MT_TOOL_FINGER, true); >> + >> + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); >> + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); >> + >> + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", >> + i, slot, touch->x, touch->y); >> + } >> + >> + input_mt_sync_frame(ts->input); >> + input_sync(ts->input); >> } >> >> static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) >> { >> struct pixcir_i2c_ts_data *tsdata = dev_id; >> const struct pixcir_ts_platform_data *pdata = tsdata->chip; >> + struct pixcir_report_data report; >> >> while (tsdata->running) { >> - pixcir_ts_poscheck(tsdata); >> - >> - if (gpio_get_value(pdata->gpio_attb)) >> + /* parse packet */ >> + pixcir_ts_parse(tsdata, &report); >> + >> + /* report it */ >> + pixcir_ts_report(tsdata, &report); >> + >> + if (gpio_get_value(pdata->gpio_attb)) { >> + if (report.num_touches) { >> + /* >> + * Last report with no finger up? >> + * Do it now then. >> + */ >> + input_mt_sync_frame(tsdata->input); >> + input_sync(tsdata->input); > > I think this construct is alright for this particular patch. If anything, it > points at a need for a better model of interrupted contacts in the core. OK. > >> + } >> break; >> + } >> >> msleep(20); >> } >> @@ -333,6 +389,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); >> input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); >> >> + error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, >> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); >> + if (error) { >> + dev_err(dev, "Error initializing Multi-Touch slots\n"); >> + return error; >> + } >> + >> input_set_drvdata(input, tsdata); >> >> error = devm_gpio_request_one(dev, pdata->gpio_attb, >> > > Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Thanks for the review. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 8a7da61..1b6e4e5 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -23,9 +23,12 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/input/pixcir_ts.h> #include <linux/gpio.h> +#define PIXCIR_MAX_SLOTS 2 + struct pixcir_i2c_ts_data { struct i2c_client *client; struct input_dev *input; @@ -33,12 +36,25 @@ struct pixcir_i2c_ts_data { bool running; }; -static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) +struct pixcir_touch { + int x; + int y; +}; + +struct pixcir_report_data { + int num_touches; + struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; +}; + +static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, + struct pixcir_report_data *report) { - struct pixcir_i2c_ts_data *tsdata = data; u8 rdbuf[10], wrbuf[1] = { 0 }; + u8 *bufptr; u8 touch; - int ret; + int ret, i; + + memset(report, 0, sizeof(struct pixcir_report_data)); ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf)); if (ret != sizeof(wrbuf)) { @@ -56,45 +72,85 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data) return; } - touch = rdbuf[0]; - if (touch) { - u16 posx1 = (rdbuf[3] << 8) | rdbuf[2]; - u16 posy1 = (rdbuf[5] << 8) | rdbuf[4]; - u16 posx2 = (rdbuf[7] << 8) | rdbuf[6]; - u16 posy2 = (rdbuf[9] << 8) | rdbuf[8]; - - input_report_key(tsdata->input, BTN_TOUCH, 1); - input_report_abs(tsdata->input, ABS_X, posx1); - input_report_abs(tsdata->input, ABS_Y, posy1); - - input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1); - input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1); - input_mt_sync(tsdata->input); - - if (touch == 2) { - input_report_abs(tsdata->input, - ABS_MT_POSITION_X, posx2); - input_report_abs(tsdata->input, - ABS_MT_POSITION_Y, posy2); - input_mt_sync(tsdata->input); - } - } else { - input_report_key(tsdata->input, BTN_TOUCH, 0); + touch = rdbuf[0] & 0x7; + if (touch > PIXCIR_MAX_SLOTS) + touch = PIXCIR_MAX_SLOTS; + + report->num_touches = touch; + bufptr = &rdbuf[2]; + + for (i = 0; i < touch; i++) { + report->touches[i].x = (bufptr[1] << 8) | bufptr[0]; + report->touches[i].y = (bufptr[3] << 8) | bufptr[2]; + + bufptr = &bufptr[4]; } +} + +static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts, + struct pixcir_report_data *report) +{ + struct input_mt_pos pos[PIXCIR_MAX_SLOTS]; + int slots[PIXCIR_MAX_SLOTS]; + struct pixcir_touch *touch; + int n, i, slot; + struct device *dev = &ts->client->dev; - input_sync(tsdata->input); + n = report->num_touches; + if (n > PIXCIR_MAX_SLOTS) + n = PIXCIR_MAX_SLOTS; + + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + pos[i].x = touch->x; + pos[i].y = touch->y; + } + + input_mt_assign_slots(ts->input, slots, pos, n); + + for (i = 0; i < n; i++) { + touch = &report->touches[i]; + slot = slots[i]; + + input_mt_slot(ts->input, slot); + input_mt_report_slot_state(ts->input, + MT_TOOL_FINGER, true); + + input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x); + input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y); + + dev_dbg(dev, "%d: slot %d, x %d, y %d\n", + i, slot, touch->x, touch->y); + } + + input_mt_sync_frame(ts->input); + input_sync(ts->input); } static irqreturn_t pixcir_ts_isr(int irq, void *dev_id) { struct pixcir_i2c_ts_data *tsdata = dev_id; const struct pixcir_ts_platform_data *pdata = tsdata->chip; + struct pixcir_report_data report; while (tsdata->running) { - pixcir_ts_poscheck(tsdata); - - if (gpio_get_value(pdata->gpio_attb)) + /* parse packet */ + pixcir_ts_parse(tsdata, &report); + + /* report it */ + pixcir_ts_report(tsdata, &report); + + if (gpio_get_value(pdata->gpio_attb)) { + if (report.num_touches) { + /* + * Last report with no finger up? + * Do it now then. + */ + input_mt_sync_frame(tsdata->input); + input_sync(tsdata->input); + } break; + } msleep(20); } @@ -333,6 +389,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0); + error = input_mt_init_slots(input, PIXCIR_MAX_SLOTS, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "Error initializing Multi-Touch slots\n"); + return error; + } + input_set_drvdata(input, tsdata); error = devm_gpio_request_one(dev, pdata->gpio_attb,
Switch to using the Type-B Multi-Touch protocol. Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/input/touchscreen/pixcir_i2c_ts.c | 125 ++++++++++++++++++++++-------- 1 file changed, 94 insertions(+), 31 deletions(-)