| Message ID | 1401374319-4480-3-git-send-email-thomas.ab@samsung.com |
|---|---|
| State | New |
| Headers | show |
Hi Thomas, > From: Thomas Abraham <thomas.ab@samsung.com> > > Add a new optional boost-frequency binding for specifying the > frequencies usable in boost mode. > > Cc: Nishanth Menon <nm@ti.com> > Cc: Lukasz Majewski <l.majewski@samsung.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > Cc: Kumar Gala <galak@codeaurora.org> > Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org> > --- > .../devicetree/bindings/cpufreq/cpufreq-boost.txt | 38 > ++++++++++++++++++++ 1 file changed, 38 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > > diff --git > a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt new > file mode 100644 index 0000000..63ed0fc --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > @@ -0,0 +1,38 @@ > +* Device tree binding for CPU boost frequency (aka over-clocking) > + > +Certain CPU's can be operated in optional 'boost' mode (or sometimes > referred as +overclocking) in which the CPU can operate at > frequencies which are not +specified by the manufacturer as CPU's > operating frequency. + > +Optional Properties: > +- boost-frequencies: list of frequencies in KHz to be used only in > boost mode. > + This list should be a subset of frequencies listed in > "operating-points" > + property. Refer to Documentation/devicetree/bindings/power/opp.txt > for > + details about "operating-points" property. > + > +Example: > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + reg = <0>; > + > + operating-points = < > + 1500000 1350000 > + 1400000 1287500 > + 1300000 1250000 > + 1200000 1187500 > + 1100000 1137500 > + 1000000 1087500 > + >; > + boost-frequencies = <1500000 1400000>; > + }; > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + reg = <1>; > + }; > + }; Acked-by: Lukasz Majewski <l.majewski@samsung.com>
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt new file mode 100644 index 0000000..63ed0fc --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt @@ -0,0 +1,38 @@ +* Device tree binding for CPU boost frequency (aka over-clocking) + +Certain CPU's can be operated in optional 'boost' mode (or sometimes referred as +overclocking) in which the CPU can operate at frequencies which are not +specified by the manufacturer as CPU's operating frequency. + +Optional Properties: +- boost-frequencies: list of frequencies in KHz to be used only in boost mode. + This list should be a subset of frequencies listed in "operating-points" + property. Refer to Documentation/devicetree/bindings/power/opp.txt for + details about "operating-points" property. + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + + operating-points = < + 1500000 1350000 + 1400000 1287500 + 1300000 1250000 + 1200000 1187500 + 1100000 1137500 + 1000000 1087500 + >; + boost-frequencies = <1500000 1400000>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + };