diff mbox

[7/8,V2] I2C: Add support for Multi channel

Message ID 1339049394-4816-8-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde June 7, 2012, 6:09 a.m. UTC
This adds multiple i2c channel support for I2C.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
 drivers/i2c/s3c24x0_i2c.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)

Comments

Joonyoung Shim June 15, 2012, 7:15 a.m. UTC | #1
Hi,

2012/6/7 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
> This adds multiple i2c channel support for I2C.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> Acked-by: Simon Glass <sjg@chromium.org>
> ---
>  drivers/i2c/s3c24x0_i2c.c |   27 +++++++++++++++++++++++++++
>  1 files changed, 27 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
> index a71f147..7521cb8 100644
> --- a/drivers/i2c/s3c24x0_i2c.c
> +++ b/drivers/i2c/s3c24x0_i2c.c
> @@ -191,6 +191,33 @@ static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus)
>        i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
>  }
>
> +/*
> + * MULTI BUS I2C support
> + */
> +
> +#ifdef CONFIG_I2C_MULTI_BUS
> +int i2c_set_bus_num(unsigned int bus)
> +{
> +       struct s3c24x0_i2c *i2c;
> +
> +       if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
> +               debug("Bad bus: %d\n", bus);
> +               return -1;
> +       }
> +
> +       g_current_bus = bus;
> +       i2c = get_base_i2c(g_current_bus);
> +       i2c_bus_init(i2c, g_current_bus);

This causes duplicated pin configuration whenever calls i2c_set_bus_num().

> +
> +       return 0;
> +}
> +
> +unsigned int i2c_get_bus_num(void)
> +{
> +       return g_current_bus;
> +}
> +#endif

Does only EXYNOS5 support CONFIG_I2C_MULTI_BUS?

> +
>  #ifdef CONFIG_EXYNOS5
>  void i2c_init(int speed, int slaveadd)
>  {
> --
> 1.7.4.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Thanks.
Rajeshwari Birje June 19, 2012, 5:44 a.m. UTC | #2
Hi Joonyoung Shim,

Thank you for comments.

On Fri, Jun 15, 2012 at 12:45 PM, Joonyoung Shim <dofmind@gmail.com> wrote:
> Hi,
>
> 2012/6/7 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
>> This adds multiple i2c channel support for I2C.
>>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>> Acked-by: Simon Glass <sjg@chromium.org>
>> ---
>>  drivers/i2c/s3c24x0_i2c.c |   27 +++++++++++++++++++++++++++
>>  1 files changed, 27 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
>> index a71f147..7521cb8 100644
>> --- a/drivers/i2c/s3c24x0_i2c.c
>> +++ b/drivers/i2c/s3c24x0_i2c.c
>> @@ -191,6 +191,33 @@ static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus)
>>        i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
>>  }
>>
>> +/*
>> + * MULTI BUS I2C support
>> + */
>> +
>> +#ifdef CONFIG_I2C_MULTI_BUS
>> +int i2c_set_bus_num(unsigned int bus)
>> +{
>> +       struct s3c24x0_i2c *i2c;
>> +
>> +       if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
>> +               debug("Bad bus: %d\n", bus);
>> +               return -1;
>> +       }
>> +
>> +       g_current_bus = bus;
>> +       i2c = get_base_i2c(g_current_bus);
>> +       i2c_bus_init(i2c, g_current_bus);
>
> This causes duplicated pin configuration whenever calls i2c_set_bus_num().
>
-- Initally we are initialising only for bus 0, When this function
gets called with bus id other than 0 we need to initialise that bus.
>> +
>> +       return 0;
>> +}
>> +
>> +unsigned int i2c_get_bus_num(void)
>> +{
>> +       return g_current_bus;
>> +}
>> +#endif
>
> Does only EXYNOS5 support CONFIG_I2C_MULTI_BUS?
-- EXYNOS4 also has Multi Bus I2C
>
>> +
>>  #ifdef CONFIG_EXYNOS5
>>  void i2c_init(int speed, int slaveadd)
>>  {
>> --
>> 1.7.4.4
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot@lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
> Thanks.
>
> --
> - Joonyoung Shim
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Regards,
Rajeshwari Shinde.
Joonyoung Shim June 19, 2012, 7:30 a.m. UTC | #3
2012/6/19 Rajeshwari Birje <rajeshwari.birje@gmail.com>:
> Hi Joonyoung Shim,
>
> Thank you for comments.
>
> On Fri, Jun 15, 2012 at 12:45 PM, Joonyoung Shim <dofmind@gmail.com> wrote:
>> Hi,
>>
>> 2012/6/7 Rajeshwari Shinde <rajeshwari.s@samsung.com>:
>>> This adds multiple i2c channel support for I2C.
>>>
>>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>>> Acked-by: Simon Glass <sjg@chromium.org>
>>> ---
>>>  drivers/i2c/s3c24x0_i2c.c |   27 +++++++++++++++++++++++++++
>>>  1 files changed, 27 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
>>> index a71f147..7521cb8 100644
>>> --- a/drivers/i2c/s3c24x0_i2c.c
>>> +++ b/drivers/i2c/s3c24x0_i2c.c
>>> @@ -191,6 +191,33 @@ static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus)
>>>        i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
>>>  }
>>>
>>> +/*
>>> + * MULTI BUS I2C support
>>> + */
>>> +
>>> +#ifdef CONFIG_I2C_MULTI_BUS
>>> +int i2c_set_bus_num(unsigned int bus)
>>> +{
>>> +       struct s3c24x0_i2c *i2c;
>>> +
>>> +       if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
>>> +               debug("Bad bus: %d\n", bus);
>>> +               return -1;
>>> +       }
>>> +
>>> +       g_current_bus = bus;
>>> +       i2c = get_base_i2c(g_current_bus);
>>> +       i2c_bus_init(i2c, g_current_bus);
>>
>> This causes duplicated pin configuration whenever calls i2c_set_bus_num().
>>
> -- Initally we are initialising only for bus 0, When this function
> gets called with bus id other than 0 we need to initialise that bus.

The problem is i2c_set_bus_num() can be called many times.
If did i2c_bus_init() already, just set g_current_bus.
diff mbox

Patch

diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index a71f147..7521cb8 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -191,6 +191,33 @@  static void i2c_bus_init(struct s3c24x0_i2c *i2c, unsigned int bus)
 	i2c_ch_init(i2c, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 }
 
+/*
+ * MULTI BUS I2C support
+ */
+
+#ifdef CONFIG_I2C_MULTI_BUS
+int i2c_set_bus_num(unsigned int bus)
+{
+	struct s3c24x0_i2c *i2c;
+
+	if ((bus < 0) || (bus >= CONFIG_MAX_I2C_NUM)) {
+		debug("Bad bus: %d\n", bus);
+		return -1;
+	}
+
+	g_current_bus = bus;
+	i2c = get_base_i2c(g_current_bus);
+	i2c_bus_init(i2c, g_current_bus);
+
+	return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+	return g_current_bus;
+}
+#endif
+
 #ifdef CONFIG_EXYNOS5
 void i2c_init(int speed, int slaveadd)
 {