diff mbox

[8/8,V2] EXYNOS5: Enable SPI booting.

Message ID 1343732461-3092-9-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde July 31, 2012, 11:01 a.m. UTC 
This patch enables SPI Booting for EXYNOS5

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
	- None.
 board/samsung/smdk5250/Makefile                   |    2 +-
 board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} |   31 +++++++++++++++++++-
 include/configs/smdk5250.h                        |    5 +++
 3 files changed, 35 insertions(+), 3 deletions(-)
 rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%)

Comments

Simon Glass Oct. 2, 2012, 6:10 a.m. UTC | #1 
Hi,

On Tue, Jul 31, 2012 at 4:01 AM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch enables SPI Booting for EXYNOS5
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> ---
> Changes in V2:
>         - None.
>  board/samsung/smdk5250/Makefile                   |    2 +-
>  board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} |   31 +++++++++++++++++++-
>  include/configs/smdk5250.h                        |    5 +++
>  3 files changed, 35 insertions(+), 3 deletions(-)
>  rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%)
>
> diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
> index 1474fa8..47c6a5a 100644
> --- a/board/samsung/smdk5250/Makefile
> +++ b/board/samsung/smdk5250/Makefile
> @@ -36,7 +36,7 @@ COBJS += smdk5250.o
>  endif
>
>  ifdef CONFIG_SPL_BUILD
> -COBJS  += mmc_boot.o
> +COBJS  += spl_boot.o
>  endif
>
>  SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> diff --git a/board/samsung/smdk5250/mmc_boot.c b/board/samsung/smdk5250/spl_boot.c
> similarity index 66%
> rename from board/samsung/smdk5250/mmc_boot.c
> rename to board/samsung/smdk5250/spl_boot.c
> index 449a919..d8f3c1e 100644
> --- a/board/samsung/smdk5250/mmc_boot.c
> +++ b/board/samsung/smdk5250/spl_boot.c
> @@ -23,6 +23,16 @@
>  #include<common.h>
>  #include<config.h>
>
> +enum boot_mode {
> +       BOOT_MODE_MMC = 4,
> +       BOOT_MODE_SERIAL = 20,
> +       /* Boot based on Operating Mode pin settings */
> +       BOOT_MODE_OM = 32,
> +       BOOT_MODE_USB,  /* Boot using USB download */
> +};
> +
> +       typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
> +
>  /*
>  * Copy U-boot from mmc to RAM:
>  * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
> @@ -30,9 +40,26 @@
>  */
>  void copy_uboot_to_ram(void)
>  {
> -       u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
> +       spi_copy_func_t spi_copy;
> +       enum boot_mode bootmode;
> +       u32 (*copy_bl2)(u32, u32, u32);
> +
> +       bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
>
> -       copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
> +       switch (bootmode) {
> +       case BOOT_MODE_SERIAL:
> +               spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
> +               spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
> +                                               CONFIG_SYS_TEXT_BASE);
> +               break;
> +       case BOOT_MODE_MMC:
> +               copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
> +               copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
> +                                               CONFIG_SYS_TEXT_BASE);
> +               break;
> +       default:
> +               break;
> +       }
>  }
>
>  void board_init_f(unsigned long bootflag)
> diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
> index 29b7ac6..4b9093c 100644
> --- a/include/configs/smdk5250.h
> +++ b/include/configs/smdk5250.h
> @@ -192,6 +192,11 @@
>  /* U-boot copy size from boot Media to DRAM.*/
>  #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
>  #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
> +
> +#define OM_STAT                                (0x1f << 1)
> +#define EXYNOS_COPY_SPI_FNPTR_ADDR     0x02020058

Would these two be better in exynos5.h or similar? They don't seem
like a board feature?

> +#define SPI_FLASH_UBOOT_POS            (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
> +
>  #define CONFIG_DOS_PARTITION
>
>  #define CONFIG_IRAM_STACK      0x02050000
> --
> 1.7.4.4
>

Regards,
Simon
Simon Glass Oct. 17, 2012, 11:48 p.m. UTC | #2 
+original CC list

Hi,

On Tue, Oct 16, 2012 at 10:23 PM, Hatim Rv <rv.hatimali@gmail.com> wrote:
> Hello,
>
> On Tue, Oct 2, 2012 at 11:40 AM, Simon Glass <sjg@chromium.org> wrote:
>>
>> Hi,
>>
>> On Tue, Jul 31, 2012 at 4:01 AM, Rajeshwari Shinde
>> <rajeshwari.s@samsung.com> wrote:
>> > This patch enables SPI Booting for EXYNOS5
>> >
>> > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>> > ---
>> > Changes in V2:
>> >         - None.
>> >  board/samsung/smdk5250/Makefile                   |    2 +-
>> >  board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} |   31
>> > +++++++++++++++++++-
>> >  include/configs/smdk5250.h                        |    5 +++
>> >  3 files changed, 35 insertions(+), 3 deletions(-)
>> >  rename board/samsung/smdk5250/{mmc_boot.c => spl_boot.c} (66%)
>> >
>> > diff --git a/board/samsung/smdk5250/Makefile
>> > b/board/samsung/smdk5250/Makefile
>> > index 1474fa8..47c6a5a 100644
>> > --- a/board/samsung/smdk5250/Makefile
>> > +++ b/board/samsung/smdk5250/Makefile
>> > @@ -36,7 +36,7 @@ COBJS += smdk5250.o
>> >  endif
>> >
>> >  ifdef CONFIG_SPL_BUILD
>> > -COBJS  += mmc_boot.o
>> > +COBJS  += spl_boot.o
>> >  endif
>> >
>> >  SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
>> > diff --git a/board/samsung/smdk5250/mmc_boot.c
>> > b/board/samsung/smdk5250/spl_boot.c
>> > similarity index 66%
>> > rename from board/samsung/smdk5250/mmc_boot.c
>> > rename to board/samsung/smdk5250/spl_boot.c
>> > index 449a919..d8f3c1e 100644
>> > --- a/board/samsung/smdk5250/mmc_boot.c
>> > +++ b/board/samsung/smdk5250/spl_boot.c
>> > @@ -23,6 +23,16 @@
>> >  #include<common.h>
>> >  #include<config.h>
>> >
>> > +enum boot_mode {
>> > +       BOOT_MODE_MMC = 4,
>> > +       BOOT_MODE_SERIAL = 20,
>> > +       /* Boot based on Operating Mode pin settings */
>> > +       BOOT_MODE_OM = 32,
>> > +       BOOT_MODE_USB,  /* Boot using USB download */
>> > +};
>> > +
>> > +       typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
>> > +
>> >  /*
>> >  * Copy U-boot from mmc to RAM:
>> >  * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
>> > @@ -30,9 +40,26 @@
>> >  */
>> >  void copy_uboot_to_ram(void)
>> >  {
>> > -       u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32
>> > *)COPY_BL2_FNPTR_ADDR;
>> > +       spi_copy_func_t spi_copy;
>> > +       enum boot_mode bootmode;
>> > +       u32 (*copy_bl2)(u32, u32, u32);
>> > +
>> > +       bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
>> >
>> > -       copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
>> > CONFIG_SYS_TEXT_BASE);
>> > +       switch (bootmode) {
>> > +       case BOOT_MODE_SERIAL:
>> > +               spi_copy = *(spi_copy_func_t
>> > *)EXYNOS_COPY_SPI_FNPTR_ADDR;
>> > +               spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
>> > +                                               CONFIG_SYS_TEXT_BASE);
>> > +               break;
>> > +       case BOOT_MODE_MMC:
>> > +               copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
>> > +               copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
>> > +                                               CONFIG_SYS_TEXT_BASE);
>> > +               break;
>> > +       default:
>> > +               break;
>> > +       }
>> >  }
>> >
>> >  void board_init_f(unsigned long bootflag)
>> > diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
>> > index 29b7ac6..4b9093c 100644
>> > --- a/include/configs/smdk5250.h
>> > +++ b/include/configs/smdk5250.h
>> > @@ -192,6 +192,11 @@
>> >  /* U-boot copy size from boot Media to DRAM.*/
>> >  #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
>> >  #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
>> > +
>> > +#define OM_STAT                                (0x1f << 1)
>> > +#define EXYNOS_COPY_SPI_FNPTR_ADDR     0x02020058
>>
>> Would these two be better in exynos5.h or similar? They don't seem
>> like a board feature?
>>
>
> Since the other SoC related defines like EXYNOS_COPY_SPI_FNPTR_ADDR
> and CONFIG_IRAM_STACK are also in the smdk5250.h it would be better if
> we keep the above defines there. Once we have code for mulitple boards
> based on Exynos5, we can segregate the board and SoC specific defines
> later.

That's fine with me for now.

Regards,
Simon

>
>
>> > +#define SPI_FLASH_UBOOT_POS            (CONFIG_SEC_FW_SIZE +
>> > CONFIG_BL1_SIZE)
>> > +
>> >  #define CONFIG_DOS_PARTITION
>> >
>> >  #define CONFIG_IRAM_STACK      0x02050000
>> > --
>> > 1.7.4.4
>> >
>>
>> Regards,
>> Simon
>
> Regards,
> Hatim Ali
diff mbox

Patch

diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 1474fa8..47c6a5a 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -36,7 +36,7 @@  COBJS	+= smdk5250.o
 endif
 
 ifdef CONFIG_SPL_BUILD
-COBJS	+= mmc_boot.o
+COBJS	+= spl_boot.o
 endif
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/samsung/smdk5250/mmc_boot.c b/board/samsung/smdk5250/spl_boot.c
similarity index 66%
rename from board/samsung/smdk5250/mmc_boot.c
rename to board/samsung/smdk5250/spl_boot.c
index 449a919..d8f3c1e 100644
--- a/board/samsung/smdk5250/mmc_boot.c
+++ b/board/samsung/smdk5250/spl_boot.c
@@ -23,6 +23,16 @@ 
 #include<common.h>
 #include<config.h>
 
+enum boot_mode {
+	BOOT_MODE_MMC = 4,
+	BOOT_MODE_SERIAL = 20,
+	/* Boot based on Operating Mode pin settings */
+	BOOT_MODE_OM = 32,
+	BOOT_MODE_USB,	/* Boot using USB download */
+};
+
+	typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
+
 /*
 * Copy U-boot from mmc to RAM:
 * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
@@ -30,9 +40,26 @@ 
 */
 void copy_uboot_to_ram(void)
 {
-	u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+	spi_copy_func_t spi_copy;
+	enum boot_mode bootmode;
+	u32 (*copy_bl2)(u32, u32, u32);
+
+	bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
 
-	copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+	switch (bootmode) {
+	case BOOT_MODE_SERIAL:
+		spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
+		spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
+						CONFIG_SYS_TEXT_BASE);
+		break;
+	case BOOT_MODE_MMC:
+		copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+		copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
+						CONFIG_SYS_TEXT_BASE);
+		break;
+	default:
+		break;
+	}
 }
 
 void board_init_f(unsigned long bootflag)
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 29b7ac6..4b9093c 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -192,6 +192,11 @@ 
 /* U-boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
+
+#define OM_STAT				(0x1f << 1)
+#define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
+#define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_IRAM_STACK	0x02050000