[V5,08/10] SMDK5250: Enable EMMC booting

This patch adds support for EMMC booting on SMDK5250.

Signed-off-by: Amar <amarendra.xt@samsung.com>
---
Changes since V1:
        1)Updated spl_boot.c file to maintain irom pointer table
        instead of using the #define values defined in header file.

Changes since V2:
        1)Updation of commit message and resubmition of proper patch set.

Changes since V3:
        No change.

Changes since V4:
        1)The function get_irom_func(int index) has been added to avoid
        type casting at many places.
        2)The changes to file arch/arm/include/asm/arch-exynos/clk.h are
        included in this patch file.

 arch/arm/include/asm/arch-exynos/clk.h |  3 ++
 board/samsung/smdk5250/clock_init.c    | 15 ++++++++++
 board/samsung/smdk5250/clock_init.h    |  5 ++++
 board/samsung/smdk5250/spl_boot.c      | 52 ++++++++++++++++++++++++++++++----
 4 files changed, 69 insertions(+), 6 deletions(-)

On Tue, Jan 22, 2013 at 12:43 AM, Amar <amarendra.xt@samsung.com> wrote:
> This patch adds support for EMMC booting on SMDK5250.
>
> Signed-off-by: Amar <amarendra.xt@samsung.com>

Acked-by: Simon Glass <sjg@chromium.org>

> ---
> Changes since V1:
>         1)Updated spl_boot.c file to maintain irom pointer table
>         instead of using the #define values defined in header file.
>
> Changes since V2:
>         1)Updation of commit message and resubmition of proper patch set.
>
> Changes since V3:
>         No change.
>
> Changes since V4:
>         1)The function get_irom_func(int index) has been added to avoid
>         type casting at many places.
>         2)The changes to file arch/arm/include/asm/arch-exynos/clk.h are
>         included in this patch file.
>
>  arch/arm/include/asm/arch-exynos/clk.h |  3 ++
>  board/samsung/smdk5250/clock_init.c    | 15 ++++++++++
>  board/samsung/smdk5250/clock_init.h    |  5 ++++
>  board/samsung/smdk5250/spl_boot.c      | 52 ++++++++++++++++++++++++++++++----
>  4 files changed, 69 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
> index 1935b0b..a4d5b4e 100644
> --- a/arch/arm/include/asm/arch-exynos/clk.h
> +++ b/arch/arm/include/asm/arch-exynos/clk.h
> @@ -29,6 +29,9 @@
>  #define VPLL   4
>  #define BPLL   5
>
> +#define FSYS1_MMC0_DIV_MASK    0xff0f
> +#define FSYS1_MMC0_DIV_VAL     0x0701
> +
>  unsigned long get_pll_clk(int pllreg);
>  unsigned long get_arm_clk(void);
>  unsigned long get_i2c_clk(void);
> diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
> index c009ae5..154993c 100644
> --- a/board/samsung/smdk5250/clock_init.c
> +++ b/board/samsung/smdk5250/clock_init.c
> @@ -28,6 +28,7 @@
>  #include <asm/arch/clk.h>
>  #include <asm/arch/clock.h>
>  #include <asm/arch/spl.h>
> +#include <asm/arch/dwmmc.h>
>
>  #include "clock_init.h"
>  #include "setup.h"
> @@ -664,3 +665,17 @@ void clock_init_dp_clock(void)
>         /* We run DP at 267 Mhz */
>         setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
>  }
> +
> +/*
> + * Set clock divisor value for booting from EMMC.
> + * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
> + */
> +void emmc_boot_clk_div_set(void)
> +{
> +       struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
> +       unsigned int div_mmc;
> +
> +       div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
> +       div_mmc |= FSYS1_MMC0_DIV_VAL;
> +       writel(div_mmc, (unsigned int) &clk->div_fsys1);
> +}
> diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h
> index f751bcb..20a1d47 100644
> --- a/board/samsung/smdk5250/clock_init.h
> +++ b/board/samsung/smdk5250/clock_init.h
> @@ -146,4 +146,9 @@ struct mem_timings *clock_get_mem_timings(void);
>   * Initialize clock for the device
>   */
>  void system_clock_init(void);
> +
> +/*
> + * Set clock divisor value for booting from EMMC.
> + */
> +void emmc_boot_clk_div_set(void);
>  #endif
> diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c
> index d8f3c1e..4ddbd4a 100644
> --- a/board/samsung/smdk5250/spl_boot.c
> +++ b/board/samsung/smdk5250/spl_boot.c
> @@ -23,15 +23,42 @@
>  #include<common.h>
>  #include<config.h>
>
> +#include <asm/arch-exynos/dmc.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/clk.h>
> +
> +#include "clock_init.h"
> +
> +/* Index into irom ptr table */
> +enum index {
> +       MMC_INDEX,
> +       EMMC44_INDEX,
> +       EMMC44_END_INDEX,
> +       SPI_INDEX,
> +};
> +
> +/* IROM Function Pointers Table */
> +u32 irom_ptr_table[] = {
> +       [MMC_INDEX] = 0x02020030,       /* iROM Function Pointer-SDMMC boot */
> +       [EMMC44_INDEX] = 0x02020044,    /* iROM Function Pointer-EMMC4.4 boot*/
> +       [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
> +                                               -EMMC4.4 end boot operation */
> +       [SPI_INDEX] = 0x02020058,       /* iROM Function Pointer-SPI boot */
> +       };
> +
>  enum boot_mode {
>         BOOT_MODE_MMC = 4,
>         BOOT_MODE_SERIAL = 20,
> +       BOOT_MODE_EMMC = 8,     /* EMMC4.4 */
>         /* Boot based on Operating Mode pin settings */
>         BOOT_MODE_OM = 32,
>         BOOT_MODE_USB,  /* Boot using USB download */
>  };
>
> -       typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
> +void *get_irom_func(int index)
> +{
> +       return (void *) *(u32 *)irom_ptr_table[index];
> +}
>
>  /*
>  * Copy U-boot from mmc to RAM:
> @@ -40,23 +67,36 @@ enum boot_mode {
>  */
>  void copy_uboot_to_ram(void)
>  {
> -       spi_copy_func_t spi_copy;
>         enum boot_mode bootmode;
> -       u32 (*copy_bl2)(u32, u32, u32);
> -
> +       u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
> +       u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
> +       u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
> +       void (*end_bootop_from_emmc)(void);
> +       /* read Operation Mode ststus register to find the bootmode */
>         bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
>
>         switch (bootmode) {
>         case BOOT_MODE_SERIAL:
> -               spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
> +               spi_copy = get_irom_func(SPI_INDEX);
>                 spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
>                                                 CONFIG_SYS_TEXT_BASE);
>                 break;
>         case BOOT_MODE_MMC:
> -               copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
> +               copy_bl2 = get_irom_func(MMC_INDEX);
>                 copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
>                                                 CONFIG_SYS_TEXT_BASE);
>                 break;
> +       case BOOT_MODE_EMMC:
> +               /* Set the FSYS1 clock divisor value for EMMC boot */
> +               emmc_boot_clk_div_set();
> +
> +               copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
> +               end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
> +
> +               copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
> +               end_bootop_from_emmc();
> +               break;
> +
>         default:
>                 break;
>         }
> --
> 1.8.0
>