[v4,4/4] phy: add phy-hi6220-usb

Message ID	1423726646-30336-5-git-send-email-zhangfei.gao@linaro.org
State	New
Headers	show Return-Path: <patchwork-forward+bncBD2NHEOP24LRBZ5Q6GTAKGQEAJOKV6Y@linaro.org> MIME-Version: 1.0 Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.215.45 as permitted sender) client-ip=209.85.215.45; Received-SPF: none (google.com: linux-kernel-owner@vger.kernel.org does not designate permitted sender hosts) client-ip=209.132.180.67; From: Zhangfei Gao <zhangfei.gao@linaro.org> To: Kishon Vijay Abraham I <kishon@ti.com>, balbi@ti.com, mark.rutland@arm.com, Peter Chen <peter.chen@freescale.com>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, "dan . zhao" <dan.zhao@hisilicon.com>, Wangbinghui <wangbinghui@hisilicon.com> Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, Zhangfei Gao <zhangfei.gao@linaro.org> Subject: [PATCH v4 4/4] phy: add phy-hi6220-usb Date: Thu, 12 Feb 2015 15:37:26 +0800 Message-Id: <1423726646-30336-5-git-send-email-zhangfei.gao@linaro.org> In-Reply-To: <1423726646-30336-1-git-send-email-zhangfei.gao@linaro.org> References: <1423726646-30336-1-git-send-email-zhangfei.gao@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index ccad880..40a1ef1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -162,6 +162,15 @@ config PHY_HIX5HD2_SATA help Support for SATA PHY on Hisilicon hix5hd2 Soc. +config PHY_HI6220_USB + tristate "hi6220 USB PHY support" + select USB_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI6220 USB PHY. + + To compile this driver as a module, choose M here. + config PHY_SUN4I_USB tristate "Allwinner sunxi SoC USB PHY driver" depends on ARCH_SUNXI && HAS_IOMEM && OF diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index aa74f96..ec43c2d 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o phy-exynos-usb2-y += phy-samsung-usb2.o diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/phy-hi6220-usb.c new file mode 100644 index 0000000..0d9f5ac --- /dev/null +++ b/drivers/phy/phy-hi6220-usb.c @@ -0,0 +1,306 @@ +/* + * Copyright (c) 2015 Linaro Ltd. + * Copyright (c) 2015 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> + +#define SC_PERIPH_CTRL4 0x00c + +#define CTRL4_PICO_SIDDQ BIT(6) +#define CTRL4_PICO_OGDISABLE BIT(8) +#define CTRL4_PICO_VBUSVLDEXT BIT(10) +#define CTRL4_PICO_VBUSVLDEXTSEL BIT(11) +#define CTRL4_OTG_PHY_SEL BIT(21) + +#define SC_PERIPH_CTRL5 0x010 + +#define CTRL5_USBOTG_RES_SEL BIT(3) +#define CTRL5_PICOPHY_ACAENB BIT(4) +#define CTRL5_PICOPHY_BC_MODE BIT(5) +#define CTRL5_PICOPHY_CHRGSEL BIT(6) +#define CTRL5_PICOPHY_VDATSRCEND BIT(7) +#define CTRL5_PICOPHY_VDATDETENB BIT(8) +#define CTRL5_PICOPHY_DCDENB BIT(9) +#define CTRL5_PICOPHY_IDDIG BIT(10) + +#define SC_PERIPH_CTRL8 0x018 +#define SC_PERIPH_RSTEN0 0x300 +#define SC_PERIPH_RSTDIS0 0x304 + +#define RST0_USBOTG_BUS BIT(4) +#define RST0_POR_PICOPHY BIT(5) +#define RST0_USBOTG BIT(6) +#define RST0_USBOTG_32K BIT(7) + +#define EYE_PATTERN_PARA 0x7053348c + +struct hi6220_priv { + struct usb_phy phy; + struct delayed_work work; + struct regmap *reg; + struct clk *clk; + struct regulator *vcc; + struct device *dev; + int gpio_vbus; + int gpio_id; + enum usb_otg_state state; +}; + +static void hi6220_start_peripheral(struct hi6220_priv *priv, bool on) +{ + struct usb_otg *otg = priv->phy.otg; + + if (!otg->gadget) + return; + + if (on) + usb_gadget_connect(otg->gadget); + else + usb_gadget_disconnect(otg->gadget); +} + +static void hi6220_detect_work(struct work_struct *work) +{ + struct hi6220_priv *priv = + container_of(work, struct hi6220_priv, work.work); + int gpio_id, gpio_vbus; + enum usb_otg_state state; + + if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus)) + return; + + gpio_id = gpio_get_value_cansleep(priv->gpio_id); + gpio_vbus = gpio_get_value_cansleep(priv->gpio_vbus); + + if (gpio_vbus == 0) { + if (gpio_id == 1) + state = OTG_STATE_B_PERIPHERAL; + else + state = OTG_STATE_A_HOST; + } else { + state = OTG_STATE_A_HOST; + } + + if (priv->state != state) { + hi6220_start_peripheral(priv, state == OTG_STATE_B_PERIPHERAL); + priv->state = state; + } +} + +static irqreturn_t hiusb_gpio_intr(int irq, void *data) +{ + struct hi6220_priv *priv = (struct hi6220_priv *)data; + + /* add debounce time */ + schedule_delayed_work(&priv->work, msecs_to_jiffies(100)); + return IRQ_HANDLED; +} + +static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) +{ + otg->gadget = gadget; + return 0; +} + +static int hi6220_phy_setup(struct hi6220_priv *priv, bool on) +{ + struct regmap *reg = priv->reg; + u32 val, mask; + int ret; + + if (priv->reg == NULL) + return 0; + + if (on) { + val = RST0_USBOTG_BUS | RST0_POR_PICOPHY | + RST0_USBOTG | RST0_USBOTG_32K; + mask = val; + ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val); + if (ret) + goto out; + + val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB; + mask = val | CTRL5_PICOPHY_BC_MODE; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val); + if (ret) + goto out; + + val = CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL | + CTRL4_OTG_PHY_SEL; + mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val); + if (ret) + goto out; + + ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA); + if (ret) + goto out; + } else { + val = CTRL4_PICO_SIDDQ; + mask = val; + ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val); + if (ret) + goto out; + + val = RST0_USBOTG_BUS | RST0_POR_PICOPHY | + RST0_USBOTG | RST0_USBOTG_32K; + mask = val; + ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val); + if (ret) + goto out; + } + + return 0; +out: + dev_err(priv->dev, "failed to setup phy ret: %d\n", ret); + return ret; +} + +static int hi6220_phy_probe(struct platform_device *pdev) +{ + struct hi6220_priv *priv; + struct usb_otg *otg; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + int ret, irq; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + priv->dev = dev; + priv->phy.dev = &pdev->dev; + priv->phy.otg = otg; + priv->phy.label = "hi6220"; + priv->phy.type = USB_PHY_TYPE_USB2; + otg->set_peripheral = hi6220_set_peripheral; + platform_set_drvdata(pdev, priv); + + priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,vbus-gpios", 0); + if (priv->gpio_vbus == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!gpio_is_valid(priv->gpio_vbus)) { + dev_err(dev, "invalid gpio %d\n", priv->gpio_vbus); + return -ENODEV; + } + + priv->gpio_id = of_get_named_gpio(np, "hisilicon,id-gpios", 0); + if (priv->gpio_id == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (!gpio_is_valid(priv->gpio_id)) { + dev_err(dev, "invalid gpio %d\n", priv->gpio_id); + return -ENODEV; + } + + priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "hisilicon,peripheral-syscon"); + if (IS_ERR(priv->reg)) + priv->reg = NULL; + + ret = devm_gpio_request_one(dev, priv->gpio_vbus, + GPIOF_IN, "gpio_vbus"); + if (ret < 0) { + dev_err(dev, "gpio request failed for gpio_vbus\n"); + return ret; + } + + ret = devm_gpio_request_one(dev, priv->gpio_id, GPIOF_IN, "gpio_id"); + if (ret < 0) { + dev_err(dev, "gpio request failed for gpio_id\n"); + return ret; + } + + priv->vcc = devm_regulator_get(dev, "vcc"); + if (IS_ERR(priv->vcc)) { + if (PTR_ERR(priv->vcc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No regulator found\n"); + } else { + ret = regulator_enable(priv->vcc); + if (ret) { + dev_err(dev, "Failed to enable regulator\n"); + return -ENODEV; + } + } + + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + regulator_disable(priv->vcc); + return PTR_ERR(priv->clk); + } + clk_prepare_enable(priv->clk); + INIT_DELAYED_WORK(&priv->work, hi6220_detect_work); + + irq = gpio_to_irq(priv->gpio_vbus); + ret = devm_request_irq(dev, gpio_to_irq(priv->gpio_vbus), + hiusb_gpio_intr, IRQF_NO_SUSPEND | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "vbus_gpio_intr", priv); + if (ret) { + dev_err(dev, "request gpio irq failed.\n"); + goto err_irq; + } + + hi6220_phy_setup(priv, true); + ret = usb_add_phy_dev(&priv->phy); + if (ret) { + dev_err(dev, "Can't register transceiver\n"); + goto err_irq; + } + schedule_delayed_work(&priv->work, 0); + + return 0; +err_irq: + cancel_delayed_work_sync(&priv->work); + clk_disable_unprepare(priv->clk); + regulator_disable(priv->vcc); + return ret; +} + +static int hi6220_phy_remove(struct platform_device *pdev) +{ + struct hi6220_priv *priv = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&priv->work); + hi6220_phy_setup(priv, false); + clk_disable_unprepare(priv->clk); + regulator_disable(priv->vcc); + return 0; +} + +static const struct of_device_id hi6220_phy_of_match[] = { + {.compatible = "hisilicon,hi6220-usb-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, hi6220_phy_of_match); + +static struct platform_driver hi6220_phy_driver = { + .probe = hi6220_phy_probe, + .remove = hi6220_phy_remove, + .driver = { + .name = "hi6220-usb-phy", + .of_match_table = hi6220_phy_of_match, + } +}; +module_platform_driver(hi6220_phy_driver); + +MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver"); +MODULE_ALIAS("platform:hi6220-usb-phy"); +MODULE_LICENSE("GPL");

[v4,4/4] phy: add phy-hi6220-usb

Commit Message

Comments

Patch