diff mbox

[v4,6/9] usb: dwc3: save/restore OTG registers during suspend/resume

Message ID 1441203864-15786-7-git-send-email-rogerq@ti.com
State New
Headers show

Commit Message

Roger Quadros Sept. 2, 2015, 2:24 p.m. UTC 
Without this we loose OTG controller register context and malfunction
after a system suspend-resume.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/usb/dwc3/core.c | 17 +++++++++++++++++
 drivers/usb/dwc3/core.h |  6 +++++-
 2 files changed, 22 insertions(+), 1 deletion(-)

Comments

Felipe Balbi Sept. 2, 2015, 2:44 p.m. UTC | #1 
On Wed, Sep 02, 2015 at 05:24:21PM +0300, Roger Quadros wrote:
> Without this we loose OTG controller register context and malfunction
> after a system suspend-resume.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
>  drivers/usb/dwc3/core.c | 17 +++++++++++++++++
>  drivers/usb/dwc3/core.h |  6 +++++-
>  2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 632ee53..684010c 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -56,6 +56,7 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
>  	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
>  	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
>  	reg |= DWC3_GCTL_PRTCAPDIR(mode);
> +	dwc->current_mode = mode;
>  	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
>  }
>  
> @@ -1443,6 +1444,14 @@ static int dwc3_suspend(struct device *dev)
>  
>  	spin_lock_irqsave(&dwc->lock, flags);
>  
> +	/* Save OTG state only if we're really using it */
> +	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
> +		dwc->ocfg = dwc3_readl(dwc->regs, DWC3_OCFG);
> +		dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
> +		dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);

oevt is what you use to clear pending IRQs, which means that ...

> +		dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
> +	}
> +
>  	switch (dwc->dr_mode) {
>  	case USB_DR_MODE_PERIPHERAL:
>  	case USB_DR_MODE_OTG:
> @@ -1486,6 +1495,14 @@ static int dwc3_resume(struct device *dev)
>  	dwc3_event_buffers_setup(dwc);
>  	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
>  
> +	/* Restore OTG state only if we're really using it */
> +	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
> +		dwc3_writel(dwc->regs, DWC3_OCFG, dwc->ocfg);
> +		dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
> +		dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);

... you could be clearing pending IRQs right here.

> +		dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
> +	}
> +
>  	switch (dwc->dr_mode) {
>  	case USB_DR_MODE_PERIPHERAL:
>  	case USB_DR_MODE_OTG:
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 129ef37..1115ce0 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -737,6 +737,7 @@ struct dwc3_scratchpad_array {
>   * @regs: base address for our registers
>   * @regs_size: address space size
>   * @oevten: otg interrupt enable mask copy
> + * @current_mode: current mode of operation written to PRTCAPDIR
>   * @nr_scratch: number of scratch buffers
>   * @num_event_buffers: calculated number of event buffers
>   * @u1u2: only used on revisions <1.83a for workaround
> @@ -858,9 +859,12 @@ struct dwc3 {
>  	/* used for suspend/resume */
>  	u32			dcfg;
>  	u32			gctl;
> -
> +	u32			ocfg;
> +	u32			octl;
> +	u32			oevt;
>  	u32			oevten;
>  
> +	u32			current_mode;
>  	u32			nr_scratch;
>  	u32			num_event_buffers;
>  	u32			u1u2;
> -- 
> 2.1.4
>
Roger Quadros Sept. 3, 2015, 1:54 p.m. UTC | #2 
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On 02/09/15 17:44, Felipe Balbi wrote:
> On Wed, Sep 02, 2015 at 05:24:21PM +0300, Roger Quadros wrote:
>> Without this we loose OTG controller register context and malfunction
>> after a system suspend-resume.
>>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  drivers/usb/dwc3/core.c | 17 +++++++++++++++++
>>  drivers/usb/dwc3/core.h |  6 +++++-
>>  2 files changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 632ee53..684010c 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -56,6 +56,7 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
>>  	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
>>  	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
>>  	reg |= DWC3_GCTL_PRTCAPDIR(mode);
>> +	dwc->current_mode = mode;
>>  	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
>>  }
>>  
>> @@ -1443,6 +1444,14 @@ static int dwc3_suspend(struct device *dev)
>>  
>>  	spin_lock_irqsave(&dwc->lock, flags);
>>  
>> +	/* Save OTG state only if we're really using it */
>> +	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
>> +		dwc->ocfg = dwc3_readl(dwc->regs, DWC3_OCFG);
>> +		dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
>> +		dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
> 
> oevt is what you use to clear pending IRQs, which means that ...
> 
>> +		dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
>> +	}
>> +
>>  	switch (dwc->dr_mode) {
>>  	case USB_DR_MODE_PERIPHERAL:
>>  	case USB_DR_MODE_OTG:
>> @@ -1486,6 +1495,14 @@ static int dwc3_resume(struct device *dev)
>>  	dwc3_event_buffers_setup(dwc);
>>  	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
>>  
>> +	/* Restore OTG state only if we're really using it */
>> +	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
>> +		dwc3_writel(dwc->regs, DWC3_OCFG, dwc->ocfg);
>> +		dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
>> +		dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
> 
> ... you could be clearing pending IRQs right here.

Good catch. So we can't really restore this register.
I'll remove this line.

> 
>> +		dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
>> +	}
>> +
>>  	switch (dwc->dr_mode) {
>>  	case USB_DR_MODE_PERIPHERAL:
>>  	case USB_DR_MODE_OTG:
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 129ef37..1115ce0 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -737,6 +737,7 @@ struct dwc3_scratchpad_array {
>>   * @regs: base address for our registers
>>   * @regs_size: address space size
>>   * @oevten: otg interrupt enable mask copy
>> + * @current_mode: current mode of operation written to PRTCAPDIR
>>   * @nr_scratch: number of scratch buffers
>>   * @num_event_buffers: calculated number of event buffers
>>   * @u1u2: only used on revisions <1.83a for workaround
>> @@ -858,9 +859,12 @@ struct dwc3 {
>>  	/* used for suspend/resume */
>>  	u32			dcfg;
>>  	u32			gctl;
>> -
>> +	u32			ocfg;
>> +	u32			octl;
>> +	u32			oevt;
>>  	u32			oevten;
>>  
>> +	u32			current_mode;
>>  	u32			nr_scratch;
>>  	u32			num_event_buffers;
>>  	u32			u1u2;
>> -- 
>> 2.1.4
>>
> 

- --
cheers,
- -roger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=hUag
-----END PGP SIGNATURE-----
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
diff mbox

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 632ee53..684010c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -56,6 +56,7 @@  void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
 	reg |= DWC3_GCTL_PRTCAPDIR(mode);
+	dwc->current_mode = mode;
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
@@ -1443,6 +1444,14 @@  static int dwc3_suspend(struct device *dev)
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
+	/* Save OTG state only if we're really using it */
+	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
+		dwc->ocfg = dwc3_readl(dwc->regs, DWC3_OCFG);
+		dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
+		dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
+		dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
+	}
+
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
@@ -1486,6 +1495,14 @@  static int dwc3_resume(struct device *dev)
 	dwc3_event_buffers_setup(dwc);
 	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
 
+	/* Restore OTG state only if we're really using it */
+	if (dwc->current_mode == DWC3_GCTL_PRTCAP_OTG) {
+		dwc3_writel(dwc->regs, DWC3_OCFG, dwc->ocfg);
+		dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
+		dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
+		dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
+	}
+
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 129ef37..1115ce0 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -737,6 +737,7 @@  struct dwc3_scratchpad_array {
  * @regs: base address for our registers
  * @regs_size: address space size
  * @oevten: otg interrupt enable mask copy
+ * @current_mode: current mode of operation written to PRTCAPDIR
  * @nr_scratch: number of scratch buffers
  * @num_event_buffers: calculated number of event buffers
  * @u1u2: only used on revisions <1.83a for workaround
@@ -858,9 +859,12 @@  struct dwc3 {
 	/* used for suspend/resume */
 	u32			dcfg;
 	u32			gctl;
-
+	u32			ocfg;
+	u32			octl;
+	u32			oevt;
 	u32			oevten;
 
+	u32			current_mode;
 	u32			nr_scratch;
 	u32			num_event_buffers;
 	u32			u1u2;