diff mbox

ARM: ux500: modify initial levelshifter status

Message ID 1444758414-4401-1-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Oct. 13, 2015, 5:46 p.m. UTC 
commit 1d8aca9df612f5751892fb2642d72536f2f48fd0
"ARM: ux500: fix MMC/SD card regression"
fixed broken the level shifter: it should be default ON
but became default OFF.

Fixes: 1d8aca9df612 "ARM: ux500: fix MMC/SD card regression"
Reported-and-tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM SoC folks: please apply this directly for fixes. I have
no other Ux500 fixes pending for now.
---
 arch/arm/boot/dts/ste-hrefv60plus.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Arnd Bergmann Oct. 14, 2015, 3:15 p.m. UTC | #1 
On Tuesday 13 October 2015 19:46:54 Linus Walleij wrote:
> 
> Fixes: 1d8aca9df612 "ARM: ux500: fix MMC/SD card regression"
> Reported-and-tested-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ARM SoC folks: please apply this directly for fixes. I have
> no other Ux500 fixes pending for now.
> 

Applied to fixes branch, thanks!

	Arnd
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 810cda743b6d..9c2387b34d0c 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -56,7 +56,7 @@ 
 					/* VMMCI level-shifter enable */
 					default_hrefv60_cfg2 {
 						pins = "GPIO169_D22";
-						ste,config = <&gpio_out_lo>;
+						ste,config = <&gpio_out_hi>;
 					};
 					/* VMMCI level-shifter voltage select */
 					default_hrefv60_cfg3 {