| Message ID | 1458717126-20814-1-git-send-email-jun.nie@linaro.org |
|---|---|
| State | New |
| Headers | show |
2016-03-23 15:12 GMT+08:00 Jun Nie <jun.nie@linaro.org>: > Complete support to ZTE uart with adding specific registers > mask. > We use a magic amba periphid value as pl011 device on ZTE > does not have a periphid value in register. The magic value > should also be feed via device tree "arm,primecell-periphid" > property to match pl011 driver and get ZTE uart data. > > Signed-off-by: Jun Nie <jun.nie@linaro.org> > --- > drivers/tty/serial/amba-pl011.c | 73 +++++++++++++++++++++++++++++++++-------- > include/linux/amba/serial.h | 4 +++ > 2 files changed, 64 insertions(+), 13 deletions(-) > > diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c > index 7c198e0..696ee0c 100644 > --- a/drivers/tty/serial/amba-pl011.c > +++ b/drivers/tty/serial/amba-pl011.c > @@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { > struct vendor_data { > const u16 *reg_offset; > unsigned int ifls; > + unsigned int fr_busy; > + unsigned int fr_dsr; > + unsigned int fr_cts; > + unsigned int fr_ri; > bool access_32b; > bool oversampling; > bool dma_threshold; > @@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) > static struct vendor_data vendor_arm = { > .reg_offset = pl011_std_offsets, > .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, > + .fr_busy = UART01x_FR_BUSY, > + .fr_dsr = UART01x_FR_DSR, > + .fr_cts = UART01x_FR_CTS, > + .fr_ri = UART011_FR_RI, > .oversampling = false, > .dma_threshold = false, > .cts_event_workaround = false, > @@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = { > > static struct vendor_data vendor_sbsa = { > .reg_offset = pl011_std_offsets, > + .fr_busy = UART01x_FR_BUSY, > + .fr_dsr = UART01x_FR_DSR, > + .fr_cts = UART01x_FR_CTS, > + .fr_ri = UART011_FR_RI, > .oversampling = false, > .dma_threshold = false, > .cts_event_workaround = false, > @@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev) > static struct vendor_data vendor_st = { > .reg_offset = pl011_st_offsets, > .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, > + .fr_busy = UART01x_FR_BUSY, > + .fr_dsr = UART01x_FR_DSR, > + .fr_cts = UART01x_FR_CTS, > + .fr_ri = UART011_FR_RI, > .oversampling = true, > .dma_threshold = true, > .cts_event_workaround = true, > @@ -187,11 +203,25 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { > [REG_DMACR] = ZX_UART011_DMACR, > }; > > +static unsigned int get_fifosize_zte(struct amba_device *dev) > +{ > + return 16; > +} > + > static struct vendor_data vendor_zte __maybe_unused = { > .reg_offset = pl011_zte_offsets, > .access_32b = true, > .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, > - .get_fifosize = get_fifosize_arm, > + .fr_busy = ZX_UART01x_FR_BUSY, > + .fr_dsr = ZX_UART01x_FR_DSR, > + .fr_cts = ZX_UART01x_FR_CTS, > + .fr_ri = ZX_UART011_FR_RI, > + .oversampling = false, > + .dma_threshold = false, > + .cts_event_workaround = false, > + .always_enabled = false, > + .fixed_options = false, > + .get_fifosize = get_fifosize_zte, > }; > > /* Deals with DMA transactions */ > @@ -236,6 +266,10 @@ struct uart_amba_port { > unsigned int im; /* interrupt mask */ > unsigned int old_status; > unsigned int fifosize; /* vendor-specific */ > + unsigned int fr_busy; /* vendor-specific */ > + unsigned int fr_dsr; /* vendor-specific */ > + unsigned int fr_cts; /* vendor-specific */ > + unsigned int fr_ri; /* vendor-specific */ > unsigned int old_cr; /* state during shutdown */ > bool autorts; > unsigned int fixed_baud; /* vendor-set fixed baud rate */ > @@ -1166,7 +1200,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) > return; > > /* Disable RX and TX DMA */ > - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) > + while (pl011_read(uap, REG_FR) & uap->fr_busy) > cpu_relax(); > > spin_lock_irq(&uap->port.lock); > @@ -1415,11 +1449,11 @@ static void pl011_modem_status(struct uart_amba_port *uap) > if (delta & UART01x_FR_DCD) > uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); > > - if (delta & UART01x_FR_DSR) > + if (delta & uap->fr_dsr) > uap->port.icount.dsr++; > > - if (delta & UART01x_FR_CTS) > - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); > + if (delta & uap->fr_cts) > + uart_handle_cts_change(&uap->port, status & uap->fr_cts); > > wake_up_interruptible(&uap->port.state->port.delta_msr_wait); > } > @@ -1492,7 +1526,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) > struct uart_amba_port *uap = > container_of(port, struct uart_amba_port, port); > unsigned int status = pl011_read(uap, REG_FR); > - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; > + return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; > } > > static unsigned int pl011_get_mctrl(struct uart_port *port) > @@ -1507,9 +1541,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) > result |= tiocmbit > > TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); > - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); > - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); > - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); > + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); > + TIOCMBIT(uap->fr_cts, TIOCM_CTS); > + TIOCMBIT(uap->fr_ri, TIOCM_RNG); > #undef TIOCMBIT > return result; > } > @@ -2086,7 +2120,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) > return ret; > } > > -static struct uart_ops amba_pl011_pops = { > +static const struct uart_ops amba_pl011_pops = { > .tx_empty = pl011_tx_empty, > .set_mctrl = pl011_set_mctrl, > .get_mctrl = pl011_get_mctrl, > @@ -2190,7 +2224,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) > * Finally, wait for transmitter to become empty > * and restore the TCR > */ > - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) > + while (pl011_read(uap, REG_FR) & uap->fr_busy) > cpu_relax(); > if (!uap->vendor->always_enabled) > pl011_write(old_cr, uap, REG_CR); > @@ -2472,8 +2506,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) > return PTR_ERR(uap->clk); > > uap->reg_offset = vendor->reg_offset; > - uap->vendor = vendor; > - uap->fifosize = vendor->get_fifosize(dev); > + uap->vendor = vendor; > + uap->fifosize = vendor->get_fifosize(dev); > + uap->fr_busy = vendor->fr_busy; > + uap->fr_dsr = vendor->fr_dsr; > + uap->fr_cts = vendor->fr_cts; > + uap->fr_ri = vendor->fr_ri; > uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; > uap->port.irq = dev->irq[0]; > uap->port.ops = &amba_pl011_pops; > @@ -2555,6 +2593,10 @@ static int sbsa_uart_probe(struct platform_device *pdev) > uap->reg_offset = vendor_sbsa.reg_offset; > uap->vendor = &vendor_sbsa; > uap->fifosize = 32; > + uap->fr_busy = vendor_sbsa.fr_busy; > + uap->fr_dsr = vendor_sbsa.fr_dsr; > + uap->fr_cts = vendor_sbsa.fr_cts; > + uap->fr_ri = vendor_sbsa.fr_ri; > uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; > uap->port.irq = platform_get_irq(pdev, 0); > uap->port.ops = &sbsa_uart_pops; > @@ -2615,6 +2657,11 @@ static struct amba_id pl011_ids[] = { > .mask = 0x00ffffff, > .data = &vendor_st, > }, > + { > + .id = 0xfefefe, > + .mask = 0xffffff, > + .data = &vendor_zte, > + }, > { 0, 0 }, > }; > > diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h > index d76a19b..750f2ef 100644 > --- a/include/linux/amba/serial.h > +++ b/include/linux/amba/serial.h > @@ -103,6 +103,10 @@ > #define UART01x_FR_DSR 0x002 > #define UART01x_FR_CTS 0x001 > #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) > +#define ZX_UART01x_FR_BUSY 0x300 > +#define ZX_UART01x_FR_DSR 0x008 > +#define ZX_UART01x_FR_CTS 0x002 > +#define ZX_UART011_FR_RI 0x001 > > #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ > #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ > -- > 1.9.1 > Russell, Do you have any more comments with this AMBA version? Thanks! Jun -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016年04月01日 17:53, Jun Nie wrote: > 2016-03-23 15:12 GMT+08:00 Jun Nie <jun.nie@linaro.org>: >> Complete support to ZTE uart with adding specific registers >> mask. >> We use a magic amba periphid value as pl011 device on ZTE >> does not have a periphid value in register. The magic value >> should also be feed via device tree "arm,primecell-periphid" >> property to match pl011 driver and get ZTE uart data. >> >> Signed-off-by: Jun Nie <jun.nie@linaro.org> >> --- >> drivers/tty/serial/amba-pl011.c | 73 +++++++++++++++++++++++++++++++++-------- >> include/linux/amba/serial.h | 4 +++ >> 2 files changed, 64 insertions(+), 13 deletions(-) >> >> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c >> index 7c198e0..696ee0c 100644 >> --- a/drivers/tty/serial/amba-pl011.c >> +++ b/drivers/tty/serial/amba-pl011.c >> @@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { >> struct vendor_data { >> const u16 *reg_offset; >> unsigned int ifls; >> + unsigned int fr_busy; >> + unsigned int fr_dsr; >> + unsigned int fr_cts; >> + unsigned int fr_ri; >> bool access_32b; >> bool oversampling; >> bool dma_threshold; >> @@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) >> static struct vendor_data vendor_arm = { >> .reg_offset = pl011_std_offsets, >> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >> + .fr_busy = UART01x_FR_BUSY, >> + .fr_dsr = UART01x_FR_DSR, >> + .fr_cts = UART01x_FR_CTS, >> + .fr_ri = UART011_FR_RI, >> .oversampling = false, >> .dma_threshold = false, >> .cts_event_workaround = false, >> @@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = { >> >> static struct vendor_data vendor_sbsa = { >> .reg_offset = pl011_std_offsets, >> + .fr_busy = UART01x_FR_BUSY, >> + .fr_dsr = UART01x_FR_DSR, >> + .fr_cts = UART01x_FR_CTS, >> + .fr_ri = UART011_FR_RI, >> .oversampling = false, >> .dma_threshold = false, >> .cts_event_workaround = false, >> @@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev) >> static struct vendor_data vendor_st = { >> .reg_offset = pl011_st_offsets, >> .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, >> + .fr_busy = UART01x_FR_BUSY, >> + .fr_dsr = UART01x_FR_DSR, >> + .fr_cts = UART01x_FR_CTS, >> + .fr_ri = UART011_FR_RI, >> .oversampling = true, >> .dma_threshold = true, >> .cts_event_workaround = true, >> @@ -187,11 +203,25 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { >> [REG_DMACR] = ZX_UART011_DMACR, >> }; >> >> +static unsigned int get_fifosize_zte(struct amba_device *dev) >> +{ >> + return 16; >> +} >> + >> static struct vendor_data vendor_zte __maybe_unused = { >> .reg_offset = pl011_zte_offsets, >> .access_32b = true, >> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >> - .get_fifosize = get_fifosize_arm, >> + .fr_busy = ZX_UART01x_FR_BUSY, >> + .fr_dsr = ZX_UART01x_FR_DSR, >> + .fr_cts = ZX_UART01x_FR_CTS, >> + .fr_ri = ZX_UART011_FR_RI, >> + .oversampling = false, >> + .dma_threshold = false, >> + .cts_event_workaround = false, >> + .always_enabled = false, >> + .fixed_options = false, >> + .get_fifosize = get_fifosize_zte, >> }; >> >> /* Deals with DMA transactions */ >> @@ -236,6 +266,10 @@ struct uart_amba_port { >> unsigned int im; /* interrupt mask */ >> unsigned int old_status; >> unsigned int fifosize; /* vendor-specific */ >> + unsigned int fr_busy; /* vendor-specific */ >> + unsigned int fr_dsr; /* vendor-specific */ >> + unsigned int fr_cts; /* vendor-specific */ >> + unsigned int fr_ri; /* vendor-specific */ >> unsigned int old_cr; /* state during shutdown */ >> bool autorts; >> unsigned int fixed_baud; /* vendor-set fixed baud rate */ >> @@ -1166,7 +1200,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) >> return; >> >> /* Disable RX and TX DMA */ >> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >> cpu_relax(); >> >> spin_lock_irq(&uap->port.lock); >> @@ -1415,11 +1449,11 @@ static void pl011_modem_status(struct uart_amba_port *uap) >> if (delta & UART01x_FR_DCD) >> uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); >> >> - if (delta & UART01x_FR_DSR) >> + if (delta & uap->fr_dsr) >> uap->port.icount.dsr++; >> >> - if (delta & UART01x_FR_CTS) >> - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); >> + if (delta & uap->fr_cts) >> + uart_handle_cts_change(&uap->port, status & uap->fr_cts); >> >> wake_up_interruptible(&uap->port.state->port.delta_msr_wait); >> } >> @@ -1492,7 +1526,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) >> struct uart_amba_port *uap = >> container_of(port, struct uart_amba_port, port); >> unsigned int status = pl011_read(uap, REG_FR); >> - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; >> + return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; >> } >> >> static unsigned int pl011_get_mctrl(struct uart_port *port) >> @@ -1507,9 +1541,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) >> result |= tiocmbit >> >> TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); >> - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); >> - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); >> - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); >> + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); >> + TIOCMBIT(uap->fr_cts, TIOCM_CTS); >> + TIOCMBIT(uap->fr_ri, TIOCM_RNG); >> #undef TIOCMBIT >> return result; >> } >> @@ -2086,7 +2120,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) >> return ret; >> } >> >> -static struct uart_ops amba_pl011_pops = { >> +static const struct uart_ops amba_pl011_pops = { >> .tx_empty = pl011_tx_empty, >> .set_mctrl = pl011_set_mctrl, >> .get_mctrl = pl011_get_mctrl, >> @@ -2190,7 +2224,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) >> * Finally, wait for transmitter to become empty >> * and restore the TCR >> */ >> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >> cpu_relax(); >> if (!uap->vendor->always_enabled) >> pl011_write(old_cr, uap, REG_CR); >> @@ -2472,8 +2506,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) >> return PTR_ERR(uap->clk); >> >> uap->reg_offset = vendor->reg_offset; >> - uap->vendor = vendor; >> - uap->fifosize = vendor->get_fifosize(dev); >> + uap->vendor = vendor; >> + uap->fifosize = vendor->get_fifosize(dev); >> + uap->fr_busy = vendor->fr_busy; >> + uap->fr_dsr = vendor->fr_dsr; >> + uap->fr_cts = vendor->fr_cts; >> + uap->fr_ri = vendor->fr_ri; >> uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; >> uap->port.irq = dev->irq[0]; >> uap->port.ops = &amba_pl011_pops; >> @@ -2555,6 +2593,10 @@ static int sbsa_uart_probe(struct platform_device *pdev) >> uap->reg_offset = vendor_sbsa.reg_offset; >> uap->vendor = &vendor_sbsa; >> uap->fifosize = 32; >> + uap->fr_busy = vendor_sbsa.fr_busy; >> + uap->fr_dsr = vendor_sbsa.fr_dsr; >> + uap->fr_cts = vendor_sbsa.fr_cts; >> + uap->fr_ri = vendor_sbsa.fr_ri; >> uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; >> uap->port.irq = platform_get_irq(pdev, 0); >> uap->port.ops = &sbsa_uart_pops; >> @@ -2615,6 +2657,11 @@ static struct amba_id pl011_ids[] = { >> .mask = 0x00ffffff, >> .data = &vendor_st, >> }, >> + { >> + .id = 0xfefefe, >> + .mask = 0xffffff, >> + .data = &vendor_zte, >> + }, >> { 0, 0 }, >> }; >> >> diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h >> index d76a19b..750f2ef 100644 >> --- a/include/linux/amba/serial.h >> +++ b/include/linux/amba/serial.h >> @@ -103,6 +103,10 @@ >> #define UART01x_FR_DSR 0x002 >> #define UART01x_FR_CTS 0x001 >> #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) >> +#define ZX_UART01x_FR_BUSY 0x300 >> +#define ZX_UART01x_FR_DSR 0x008 >> +#define ZX_UART01x_FR_CTS 0x002 >> +#define ZX_UART011_FR_RI 0x001 >> >> #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ >> #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ >> -- >> 1.9.1 >> Russell, Do you have any comments to these change? Jun -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-04-12 21:01 GMT+08:00 Jun Nie <jun.nie@linaro.org>: > On 2016年04月01日 17:53, Jun Nie wrote: >> >> 2016-03-23 15:12 GMT+08:00 Jun Nie <jun.nie@linaro.org>: >>> >>> Complete support to ZTE uart with adding specific registers >>> mask. >>> We use a magic amba periphid value as pl011 device on ZTE >>> does not have a periphid value in register. The magic value >>> should also be feed via device tree "arm,primecell-periphid" >>> property to match pl011 driver and get ZTE uart data. >>> >>> Signed-off-by: Jun Nie <jun.nie@linaro.org> >>> --- >>> drivers/tty/serial/amba-pl011.c | 73 >>> +++++++++++++++++++++++++++++++++-------- >>> include/linux/amba/serial.h | 4 +++ >>> 2 files changed, 64 insertions(+), 13 deletions(-) >>> >>> diff --git a/drivers/tty/serial/amba-pl011.c >>> b/drivers/tty/serial/amba-pl011.c >>> index 7c198e0..696ee0c 100644 >>> --- a/drivers/tty/serial/amba-pl011.c >>> +++ b/drivers/tty/serial/amba-pl011.c >>> @@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { >>> struct vendor_data { >>> const u16 *reg_offset; >>> unsigned int ifls; >>> + unsigned int fr_busy; >>> + unsigned int fr_dsr; >>> + unsigned int fr_cts; >>> + unsigned int fr_ri; >>> bool access_32b; >>> bool oversampling; >>> bool dma_threshold; >>> @@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct >>> amba_device *dev) >>> static struct vendor_data vendor_arm = { >>> .reg_offset = pl011_std_offsets, >>> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >>> + .fr_busy = UART01x_FR_BUSY, >>> + .fr_dsr = UART01x_FR_DSR, >>> + .fr_cts = UART01x_FR_CTS, >>> + .fr_ri = UART011_FR_RI, >>> .oversampling = false, >>> .dma_threshold = false, >>> .cts_event_workaround = false, >>> @@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = { >>> >>> static struct vendor_data vendor_sbsa = { >>> .reg_offset = pl011_std_offsets, >>> + .fr_busy = UART01x_FR_BUSY, >>> + .fr_dsr = UART01x_FR_DSR, >>> + .fr_cts = UART01x_FR_CTS, >>> + .fr_ri = UART011_FR_RI, >>> .oversampling = false, >>> .dma_threshold = false, >>> .cts_event_workaround = false, >>> @@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct >>> amba_device *dev) >>> static struct vendor_data vendor_st = { >>> .reg_offset = pl011_st_offsets, >>> .ifls = >>> UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, >>> + .fr_busy = UART01x_FR_BUSY, >>> + .fr_dsr = UART01x_FR_DSR, >>> + .fr_cts = UART01x_FR_CTS, >>> + .fr_ri = UART011_FR_RI, >>> .oversampling = true, >>> .dma_threshold = true, >>> .cts_event_workaround = true, >>> @@ -187,11 +203,25 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] >>> = { >>> [REG_DMACR] = ZX_UART011_DMACR, >>> }; >>> >>> +static unsigned int get_fifosize_zte(struct amba_device *dev) >>> +{ >>> + return 16; >>> +} >>> + >>> static struct vendor_data vendor_zte __maybe_unused = { >>> .reg_offset = pl011_zte_offsets, >>> .access_32b = true, >>> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >>> - .get_fifosize = get_fifosize_arm, >>> + .fr_busy = ZX_UART01x_FR_BUSY, >>> + .fr_dsr = ZX_UART01x_FR_DSR, >>> + .fr_cts = ZX_UART01x_FR_CTS, >>> + .fr_ri = ZX_UART011_FR_RI, >>> + .oversampling = false, >>> + .dma_threshold = false, >>> + .cts_event_workaround = false, >>> + .always_enabled = false, >>> + .fixed_options = false, >>> + .get_fifosize = get_fifosize_zte, >>> }; >>> >>> /* Deals with DMA transactions */ >>> @@ -236,6 +266,10 @@ struct uart_amba_port { >>> unsigned int im; /* interrupt mask */ >>> unsigned int old_status; >>> unsigned int fifosize; /* vendor-specific */ >>> + unsigned int fr_busy; /* vendor-specific */ >>> + unsigned int fr_dsr; /* vendor-specific */ >>> + unsigned int fr_cts; /* vendor-specific */ >>> + unsigned int fr_ri; /* vendor-specific */ >>> unsigned int old_cr; /* state during shutdown >>> */ >>> bool autorts; >>> unsigned int fixed_baud; /* vendor-set fixed baud >>> rate */ >>> @@ -1166,7 +1200,7 @@ static void pl011_dma_shutdown(struct >>> uart_amba_port *uap) >>> return; >>> >>> /* Disable RX and TX DMA */ >>> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >>> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >>> cpu_relax(); >>> >>> spin_lock_irq(&uap->port.lock); >>> @@ -1415,11 +1449,11 @@ static void pl011_modem_status(struct >>> uart_amba_port *uap) >>> if (delta & UART01x_FR_DCD) >>> uart_handle_dcd_change(&uap->port, status & >>> UART01x_FR_DCD); >>> >>> - if (delta & UART01x_FR_DSR) >>> + if (delta & uap->fr_dsr) >>> uap->port.icount.dsr++; >>> >>> - if (delta & UART01x_FR_CTS) >>> - uart_handle_cts_change(&uap->port, status & >>> UART01x_FR_CTS); >>> + if (delta & uap->fr_cts) >>> + uart_handle_cts_change(&uap->port, status & uap->fr_cts); >>> >>> wake_up_interruptible(&uap->port.state->port.delta_msr_wait); >>> } >>> @@ -1492,7 +1526,7 @@ static unsigned int pl011_tx_empty(struct uart_port >>> *port) >>> struct uart_amba_port *uap = >>> container_of(port, struct uart_amba_port, port); >>> unsigned int status = pl011_read(uap, REG_FR); >>> - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : >>> TIOCSER_TEMT; >>> + return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : >>> TIOCSER_TEMT; >>> } >>> >>> static unsigned int pl011_get_mctrl(struct uart_port *port) >>> @@ -1507,9 +1541,9 @@ static unsigned int pl011_get_mctrl(struct >>> uart_port *port) >>> result |= tiocmbit >>> >>> TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); >>> - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); >>> - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); >>> - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); >>> + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); >>> + TIOCMBIT(uap->fr_cts, TIOCM_CTS); >>> + TIOCMBIT(uap->fr_ri, TIOCM_RNG); >>> #undef TIOCMBIT >>> return result; >>> } >>> @@ -2086,7 +2120,7 @@ static int pl011_verify_port(struct uart_port >>> *port, struct serial_struct *ser) >>> return ret; >>> } >>> >>> -static struct uart_ops amba_pl011_pops = { >>> +static const struct uart_ops amba_pl011_pops = { >>> .tx_empty = pl011_tx_empty, >>> .set_mctrl = pl011_set_mctrl, >>> .get_mctrl = pl011_get_mctrl, >>> @@ -2190,7 +2224,7 @@ pl011_console_write(struct console *co, const char >>> *s, unsigned int count) >>> * Finally, wait for transmitter to become empty >>> * and restore the TCR >>> */ >>> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >>> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >>> cpu_relax(); >>> if (!uap->vendor->always_enabled) >>> pl011_write(old_cr, uap, REG_CR); >>> @@ -2472,8 +2506,12 @@ static int pl011_probe(struct amba_device *dev, >>> const struct amba_id *id) >>> return PTR_ERR(uap->clk); >>> >>> uap->reg_offset = vendor->reg_offset; >>> - uap->vendor = vendor; >>> - uap->fifosize = vendor->get_fifosize(dev); >>> + uap->vendor = vendor; >>> + uap->fifosize = vendor->get_fifosize(dev); >>> + uap->fr_busy = vendor->fr_busy; >>> + uap->fr_dsr = vendor->fr_dsr; >>> + uap->fr_cts = vendor->fr_cts; >>> + uap->fr_ri = vendor->fr_ri; >>> uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; >>> uap->port.irq = dev->irq[0]; >>> uap->port.ops = &amba_pl011_pops; >>> @@ -2555,6 +2593,10 @@ static int sbsa_uart_probe(struct platform_device >>> *pdev) >>> uap->reg_offset = vendor_sbsa.reg_offset; >>> uap->vendor = &vendor_sbsa; >>> uap->fifosize = 32; >>> + uap->fr_busy = vendor_sbsa.fr_busy; >>> + uap->fr_dsr = vendor_sbsa.fr_dsr; >>> + uap->fr_cts = vendor_sbsa.fr_cts; >>> + uap->fr_ri = vendor_sbsa.fr_ri; >>> uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : >>> UPIO_MEM; >>> uap->port.irq = platform_get_irq(pdev, 0); >>> uap->port.ops = &sbsa_uart_pops; >>> @@ -2615,6 +2657,11 @@ static struct amba_id pl011_ids[] = { >>> .mask = 0x00ffffff, >>> .data = &vendor_st, >>> }, >>> + { >>> + .id = 0xfefefe, >>> + .mask = 0xffffff, >>> + .data = &vendor_zte, >>> + }, >>> { 0, 0 }, >>> }; >>> >>> diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h >>> index d76a19b..750f2ef 100644 >>> --- a/include/linux/amba/serial.h >>> +++ b/include/linux/amba/serial.h >>> @@ -103,6 +103,10 @@ >>> #define UART01x_FR_DSR 0x002 >>> #define UART01x_FR_CTS 0x001 >>> #define UART01x_FR_TMSK (UART01x_FR_TXFF + >>> UART01x_FR_BUSY) >>> +#define ZX_UART01x_FR_BUSY 0x300 >>> +#define ZX_UART01x_FR_DSR 0x008 >>> +#define ZX_UART01x_FR_CTS 0x002 >>> +#define ZX_UART011_FR_RI 0x001 >>> >>> #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ >>> #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ >>> -- >>> 1.9.1 >>> > > Russell, > > Do you have any comments to these change? > > Jun Greg, Do you have any idea on how to drive review on this patch? Seems maintainer Russell is too busy and missing for this thread and others do not have comments. Your comments are appreciated! Thanks! Jun -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-04-29 4:11 GMT+08:00 Greg KH <greg@kroah.com>: > On Mon, Apr 25, 2016 at 02:53:02PM +0800, Jun Nie wrote: >> 2016-04-12 21:01 GMT+08:00 Jun Nie <jun.nie@linaro.org>: >> > On 2016年04月01日 17:53, Jun Nie wrote: >> >> >> >> 2016-03-23 15:12 GMT+08:00 Jun Nie <jun.nie@linaro.org>: >> >>> >> >>> Complete support to ZTE uart with adding specific registers >> >>> mask. >> >>> We use a magic amba periphid value as pl011 device on ZTE >> >>> does not have a periphid value in register. The magic value >> >>> should also be feed via device tree "arm,primecell-periphid" >> >>> property to match pl011 driver and get ZTE uart data. >> >>> >> >>> Signed-off-by: Jun Nie <jun.nie@linaro.org> >> >>> --- >> >>> drivers/tty/serial/amba-pl011.c | 73 >> >>> +++++++++++++++++++++++++++++++++-------- >> >>> include/linux/amba/serial.h | 4 +++ >> >>> 2 files changed, 64 insertions(+), 13 deletions(-) >> >>> >> >>> diff --git a/drivers/tty/serial/amba-pl011.c >> >>> b/drivers/tty/serial/amba-pl011.c >> >>> index 7c198e0..696ee0c 100644 >> >>> --- a/drivers/tty/serial/amba-pl011.c >> >>> +++ b/drivers/tty/serial/amba-pl011.c >> >>> @@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { >> >>> struct vendor_data { >> >>> const u16 *reg_offset; >> >>> unsigned int ifls; >> >>> + unsigned int fr_busy; >> >>> + unsigned int fr_dsr; >> >>> + unsigned int fr_cts; >> >>> + unsigned int fr_ri; >> >>> bool access_32b; >> >>> bool oversampling; >> >>> bool dma_threshold; >> >>> @@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct >> >>> amba_device *dev) >> >>> static struct vendor_data vendor_arm = { >> >>> .reg_offset = pl011_std_offsets, >> >>> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >> >>> + .fr_busy = UART01x_FR_BUSY, >> >>> + .fr_dsr = UART01x_FR_DSR, >> >>> + .fr_cts = UART01x_FR_CTS, >> >>> + .fr_ri = UART011_FR_RI, >> >>> .oversampling = false, >> >>> .dma_threshold = false, >> >>> .cts_event_workaround = false, >> >>> @@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = { >> >>> >> >>> static struct vendor_data vendor_sbsa = { >> >>> .reg_offset = pl011_std_offsets, >> >>> + .fr_busy = UART01x_FR_BUSY, >> >>> + .fr_dsr = UART01x_FR_DSR, >> >>> + .fr_cts = UART01x_FR_CTS, >> >>> + .fr_ri = UART011_FR_RI, >> >>> .oversampling = false, >> >>> .dma_threshold = false, >> >>> .cts_event_workaround = false, >> >>> @@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct >> >>> amba_device *dev) >> >>> static struct vendor_data vendor_st = { >> >>> .reg_offset = pl011_st_offsets, >> >>> .ifls = >> >>> UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, >> >>> + .fr_busy = UART01x_FR_BUSY, >> >>> + .fr_dsr = UART01x_FR_DSR, >> >>> + .fr_cts = UART01x_FR_CTS, >> >>> + .fr_ri = UART011_FR_RI, >> >>> .oversampling = true, >> >>> .dma_threshold = true, >> >>> .cts_event_workaround = true, >> >>> @@ -187,11 +203,25 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] >> >>> = { >> >>> [REG_DMACR] = ZX_UART011_DMACR, >> >>> }; >> >>> >> >>> +static unsigned int get_fifosize_zte(struct amba_device *dev) >> >>> +{ >> >>> + return 16; >> >>> +} >> >>> + >> >>> static struct vendor_data vendor_zte __maybe_unused = { >> >>> .reg_offset = pl011_zte_offsets, >> >>> .access_32b = true, >> >>> .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, >> >>> - .get_fifosize = get_fifosize_arm, >> >>> + .fr_busy = ZX_UART01x_FR_BUSY, >> >>> + .fr_dsr = ZX_UART01x_FR_DSR, >> >>> + .fr_cts = ZX_UART01x_FR_CTS, >> >>> + .fr_ri = ZX_UART011_FR_RI, >> >>> + .oversampling = false, >> >>> + .dma_threshold = false, >> >>> + .cts_event_workaround = false, >> >>> + .always_enabled = false, >> >>> + .fixed_options = false, >> >>> + .get_fifosize = get_fifosize_zte, >> >>> }; >> >>> >> >>> /* Deals with DMA transactions */ >> >>> @@ -236,6 +266,10 @@ struct uart_amba_port { >> >>> unsigned int im; /* interrupt mask */ >> >>> unsigned int old_status; >> >>> unsigned int fifosize; /* vendor-specific */ >> >>> + unsigned int fr_busy; /* vendor-specific */ >> >>> + unsigned int fr_dsr; /* vendor-specific */ >> >>> + unsigned int fr_cts; /* vendor-specific */ >> >>> + unsigned int fr_ri; /* vendor-specific */ >> >>> unsigned int old_cr; /* state during shutdown >> >>> */ >> >>> bool autorts; >> >>> unsigned int fixed_baud; /* vendor-set fixed baud >> >>> rate */ >> >>> @@ -1166,7 +1200,7 @@ static void pl011_dma_shutdown(struct >> >>> uart_amba_port *uap) >> >>> return; >> >>> >> >>> /* Disable RX and TX DMA */ >> >>> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >> >>> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >> >>> cpu_relax(); >> >>> >> >>> spin_lock_irq(&uap->port.lock); >> >>> @@ -1415,11 +1449,11 @@ static void pl011_modem_status(struct >> >>> uart_amba_port *uap) >> >>> if (delta & UART01x_FR_DCD) >> >>> uart_handle_dcd_change(&uap->port, status & >> >>> UART01x_FR_DCD); >> >>> >> >>> - if (delta & UART01x_FR_DSR) >> >>> + if (delta & uap->fr_dsr) >> >>> uap->port.icount.dsr++; >> >>> >> >>> - if (delta & UART01x_FR_CTS) >> >>> - uart_handle_cts_change(&uap->port, status & >> >>> UART01x_FR_CTS); >> >>> + if (delta & uap->fr_cts) >> >>> + uart_handle_cts_change(&uap->port, status & uap->fr_cts); >> >>> >> >>> wake_up_interruptible(&uap->port.state->port.delta_msr_wait); >> >>> } >> >>> @@ -1492,7 +1526,7 @@ static unsigned int pl011_tx_empty(struct uart_port >> >>> *port) >> >>> struct uart_amba_port *uap = >> >>> container_of(port, struct uart_amba_port, port); >> >>> unsigned int status = pl011_read(uap, REG_FR); >> >>> - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : >> >>> TIOCSER_TEMT; >> >>> + return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : >> >>> TIOCSER_TEMT; >> >>> } >> >>> >> >>> static unsigned int pl011_get_mctrl(struct uart_port *port) >> >>> @@ -1507,9 +1541,9 @@ static unsigned int pl011_get_mctrl(struct >> >>> uart_port *port) >> >>> result |= tiocmbit >> >>> >> >>> TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); >> >>> - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); >> >>> - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); >> >>> - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); >> >>> + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); >> >>> + TIOCMBIT(uap->fr_cts, TIOCM_CTS); >> >>> + TIOCMBIT(uap->fr_ri, TIOCM_RNG); >> >>> #undef TIOCMBIT >> >>> return result; >> >>> } >> >>> @@ -2086,7 +2120,7 @@ static int pl011_verify_port(struct uart_port >> >>> *port, struct serial_struct *ser) >> >>> return ret; >> >>> } >> >>> >> >>> -static struct uart_ops amba_pl011_pops = { >> >>> +static const struct uart_ops amba_pl011_pops = { >> >>> .tx_empty = pl011_tx_empty, >> >>> .set_mctrl = pl011_set_mctrl, >> >>> .get_mctrl = pl011_get_mctrl, >> >>> @@ -2190,7 +2224,7 @@ pl011_console_write(struct console *co, const char >> >>> *s, unsigned int count) >> >>> * Finally, wait for transmitter to become empty >> >>> * and restore the TCR >> >>> */ >> >>> - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) >> >>> + while (pl011_read(uap, REG_FR) & uap->fr_busy) >> >>> cpu_relax(); >> >>> if (!uap->vendor->always_enabled) >> >>> pl011_write(old_cr, uap, REG_CR); >> >>> @@ -2472,8 +2506,12 @@ static int pl011_probe(struct amba_device *dev, >> >>> const struct amba_id *id) >> >>> return PTR_ERR(uap->clk); >> >>> >> >>> uap->reg_offset = vendor->reg_offset; >> >>> - uap->vendor = vendor; >> >>> - uap->fifosize = vendor->get_fifosize(dev); >> >>> + uap->vendor = vendor; >> >>> + uap->fifosize = vendor->get_fifosize(dev); >> >>> + uap->fr_busy = vendor->fr_busy; >> >>> + uap->fr_dsr = vendor->fr_dsr; >> >>> + uap->fr_cts = vendor->fr_cts; >> >>> + uap->fr_ri = vendor->fr_ri; >> >>> uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; >> >>> uap->port.irq = dev->irq[0]; >> >>> uap->port.ops = &amba_pl011_pops; >> >>> @@ -2555,6 +2593,10 @@ static int sbsa_uart_probe(struct platform_device >> >>> *pdev) >> >>> uap->reg_offset = vendor_sbsa.reg_offset; >> >>> uap->vendor = &vendor_sbsa; >> >>> uap->fifosize = 32; >> >>> + uap->fr_busy = vendor_sbsa.fr_busy; >> >>> + uap->fr_dsr = vendor_sbsa.fr_dsr; >> >>> + uap->fr_cts = vendor_sbsa.fr_cts; >> >>> + uap->fr_ri = vendor_sbsa.fr_ri; >> >>> uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : >> >>> UPIO_MEM; >> >>> uap->port.irq = platform_get_irq(pdev, 0); >> >>> uap->port.ops = &sbsa_uart_pops; >> >>> @@ -2615,6 +2657,11 @@ static struct amba_id pl011_ids[] = { >> >>> .mask = 0x00ffffff, >> >>> .data = &vendor_st, >> >>> }, >> >>> + { >> >>> + .id = 0xfefefe, >> >>> + .mask = 0xffffff, >> >>> + .data = &vendor_zte, >> >>> + }, >> >>> { 0, 0 }, >> >>> }; >> >>> >> >>> diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h >> >>> index d76a19b..750f2ef 100644 >> >>> --- a/include/linux/amba/serial.h >> >>> +++ b/include/linux/amba/serial.h >> >>> @@ -103,6 +103,10 @@ >> >>> #define UART01x_FR_DSR 0x002 >> >>> #define UART01x_FR_CTS 0x001 >> >>> #define UART01x_FR_TMSK (UART01x_FR_TXFF + >> >>> UART01x_FR_BUSY) >> >>> +#define ZX_UART01x_FR_BUSY 0x300 >> >>> +#define ZX_UART01x_FR_DSR 0x008 >> >>> +#define ZX_UART01x_FR_CTS 0x002 >> >>> +#define ZX_UART011_FR_RI 0x001 >> >>> >> >>> #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ >> >>> #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ >> >>> -- >> >>> 1.9.1 >> >>> >> > >> > Russell, >> > >> > Do you have any comments to these change? >> > >> > Jun >> >> Greg, >> >> Do you have any idea on how to drive review on this patch? Seems >> maintainer Russell is too busy and missing for this thread and others >> do not have comments. Your comments are appreciated! > > I would like to get Russell's opinion of this before merging it. > > thanks, > > greg k-h Russell, Could you help have a look at this patch? Thanks! Jun -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7c198e0..696ee0c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -93,6 +93,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { struct vendor_data { const u16 *reg_offset; unsigned int ifls; + unsigned int fr_busy; + unsigned int fr_dsr; + unsigned int fr_cts; + unsigned int fr_ri; bool access_32b; bool oversampling; bool dma_threshold; @@ -111,6 +115,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) static struct vendor_data vendor_arm = { .reg_offset = pl011_std_offsets, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -121,6 +129,10 @@ static struct vendor_data vendor_arm = { static struct vendor_data vendor_sbsa = { .reg_offset = pl011_std_offsets, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -163,6 +175,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev) static struct vendor_data vendor_st = { .reg_offset = pl011_st_offsets, .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fr_busy = UART01x_FR_BUSY, + .fr_dsr = UART01x_FR_DSR, + .fr_cts = UART01x_FR_CTS, + .fr_ri = UART011_FR_RI, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -187,11 +203,25 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { [REG_DMACR] = ZX_UART011_DMACR, }; +static unsigned int get_fifosize_zte(struct amba_device *dev) +{ + return 16; +} + static struct vendor_data vendor_zte __maybe_unused = { .reg_offset = pl011_zte_offsets, .access_32b = true, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .get_fifosize = get_fifosize_arm, + .fr_busy = ZX_UART01x_FR_BUSY, + .fr_dsr = ZX_UART01x_FR_DSR, + .fr_cts = ZX_UART01x_FR_CTS, + .fr_ri = ZX_UART011_FR_RI, + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = false, + .fixed_options = false, + .get_fifosize = get_fifosize_zte, }; /* Deals with DMA transactions */ @@ -236,6 +266,10 @@ struct uart_amba_port { unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int fifosize; /* vendor-specific */ + unsigned int fr_busy; /* vendor-specific */ + unsigned int fr_dsr; /* vendor-specific */ + unsigned int fr_cts; /* vendor-specific */ + unsigned int fr_ri; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ bool autorts; unsigned int fixed_baud; /* vendor-set fixed baud rate */ @@ -1166,7 +1200,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) + while (pl011_read(uap, REG_FR) & uap->fr_busy) cpu_relax(); spin_lock_irq(&uap->port.lock); @@ -1415,11 +1449,11 @@ static void pl011_modem_status(struct uart_amba_port *uap) if (delta & UART01x_FR_DCD) uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - if (delta & UART01x_FR_DSR) + if (delta & uap->fr_dsr) uap->port.icount.dsr++; - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + if (delta & uap->fr_cts) + uart_handle_cts_change(&uap->port, status & uap->fr_cts); wake_up_interruptible(&uap->port.state->port.delta_msr_wait); } @@ -1492,7 +1526,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); unsigned int status = pl011_read(uap, REG_FR); - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; + return status & (uap->fr_busy | UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } static unsigned int pl011_get_mctrl(struct uart_port *port) @@ -1507,9 +1541,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) result |= tiocmbit TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); + TIOCMBIT(uap->fr_dsr, TIOCM_DSR); + TIOCMBIT(uap->fr_cts, TIOCM_CTS); + TIOCMBIT(uap->fr_ri, TIOCM_RNG); #undef TIOCMBIT return result; } @@ -2086,7 +2120,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } -static struct uart_ops amba_pl011_pops = { +static const struct uart_ops amba_pl011_pops = { .tx_empty = pl011_tx_empty, .set_mctrl = pl011_set_mctrl, .get_mctrl = pl011_get_mctrl, @@ -2190,7 +2224,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * Finally, wait for transmitter to become empty * and restore the TCR */ - while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) + while (pl011_read(uap, REG_FR) & uap->fr_busy) cpu_relax(); if (!uap->vendor->always_enabled) pl011_write(old_cr, uap, REG_CR); @@ -2472,8 +2506,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) return PTR_ERR(uap->clk); uap->reg_offset = vendor->reg_offset; - uap->vendor = vendor; - uap->fifosize = vendor->get_fifosize(dev); + uap->vendor = vendor; + uap->fifosize = vendor->get_fifosize(dev); + uap->fr_busy = vendor->fr_busy; + uap->fr_dsr = vendor->fr_dsr; + uap->fr_cts = vendor->fr_cts; + uap->fr_ri = vendor->fr_ri; uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = dev->irq[0]; uap->port.ops = &amba_pl011_pops; @@ -2555,6 +2593,10 @@ static int sbsa_uart_probe(struct platform_device *pdev) uap->reg_offset = vendor_sbsa.reg_offset; uap->vendor = &vendor_sbsa; uap->fifosize = 32; + uap->fr_busy = vendor_sbsa.fr_busy; + uap->fr_dsr = vendor_sbsa.fr_dsr; + uap->fr_cts = vendor_sbsa.fr_cts; + uap->fr_ri = vendor_sbsa.fr_ri; uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops; @@ -2615,6 +2657,11 @@ static struct amba_id pl011_ids[] = { .mask = 0x00ffffff, .data = &vendor_st, }, + { + .id = 0xfefefe, + .mask = 0xffffff, + .data = &vendor_zte, + }, { 0, 0 }, }; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index d76a19b..750f2ef 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -103,6 +103,10 @@ #define UART01x_FR_DSR 0x002 #define UART01x_FR_CTS 0x001 #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) +#define ZX_UART01x_FR_BUSY 0x300 +#define ZX_UART01x_FR_DSR 0x008 +#define ZX_UART01x_FR_CTS 0x002 +#define ZX_UART011_FR_RI 0x001 #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */
Complete support to ZTE uart with adding specific registers mask. We use a magic amba periphid value as pl011 device on ZTE does not have a periphid value in register. The magic value should also be feed via device tree "arm,primecell-periphid" property to match pl011 driver and get ZTE uart data. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/tty/serial/amba-pl011.c | 73 +++++++++++++++++++++++++++++++++-------- include/linux/amba/serial.h | 4 +++ 2 files changed, 64 insertions(+), 13 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html