[1/2] ARM: at91: cpuidle: convert to platform driver

On 10/14/2013 04:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 16:18 Mon 14 Oct     , Daniel Lezcano wrote:
>> On 10/14/2013 04:04 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>> On 17:51 Sat 12 Oct     , Daniel Lezcano wrote:
>>>> Use the platform driver model to separate the cpuidle specific code from
>>>> the low level pm code. It allows to remove the dependency between
>>>> these two components.
>>>>
>>>> Tested-on usb-a9263 (at91sam9263)
>>>>
>>>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

[ ... ]

>>>> ---
>>>>   	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
>>>> -	if (cpu_is_at91rm9200())
>>>> +	if (cpu_is_at91rm9200()) {
>>>> +		at91_cpuidle_device.dev.platform_data = at91rm9200_standby;
>>>>   		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
>>>> +	} else if (cpu_is_at91sam9g45()) {
>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9g45_standby;
>>>> +	} else if (cpu_is_at91sam9263()) {
>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9263_standby;
>>>> +	} else {
>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9_standby;
>>> no this is too dangerous when adding new SoC
>>>
>>> you must list the supported SoC
>>>
>>> and I prefer to move this code to the SoC init structure
>>
>> Do you mean register the platform_device in eg.
>> at91rm9200_initialize with the right platform data ?
>>
> yes as example
>
> Best Regards,

Hi Jean-Christophe,

I did the changes but there are different drawbacks with the approach.
The first one is the AT91_SOC_START is too early to call the 
platform_device_register. The second one is we have multiple declaration 
of the platform_device which is not really nice.

I found the following solution:

The platform_device is static in pm.c, there is a at91_pm_set_standby 
function. All AT91_SOC_START call at91_pm_set_standby with the right 
standby function callback, which in turns set the platform data for the 
cpuidle platform device. When the init call for pm is made, it registers 
the platform device.

That has the benefit to encapsulate the platform device and having it in 
a single place and also we have the information to remove the { if then 
else } statements we have in 'at91_pm_enter's case block for 
PM_SUSPEND_STANDBY.

Does it sound ok for you ?

Thanks
   -- Daniel



>>   <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
>> <http://twitter.com/#!/linaroorg> Twitter |
>> <http://www.linaro.org/linaro-blog/> Blog
>>

On 18:30 Mon 14 Oct     , Daniel Lezcano wrote:
> On 10/14/2013 04:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> >On 16:18 Mon 14 Oct     , Daniel Lezcano wrote:
> >>On 10/14/2013 04:04 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> >>>On 17:51 Sat 12 Oct     , Daniel Lezcano wrote:
> >>>>Use the platform driver model to separate the cpuidle specific code from
> >>>>the low level pm code. It allows to remove the dependency between
> >>>>these two components.
> >>>>
> >>>>Tested-on usb-a9263 (at91sam9263)
> >>>>
> >>>>Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> 
> [ ... ]
> 
> >>>>---
> >>>>  	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
> >>>>-	if (cpu_is_at91rm9200())
> >>>>+	if (cpu_is_at91rm9200()) {
> >>>>+		at91_cpuidle_device.dev.platform_data = at91rm9200_standby;
> >>>>  		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
> >>>>+	} else if (cpu_is_at91sam9g45()) {
> >>>>+		at91_cpuidle_device.dev.platform_data = at91sam9g45_standby;
> >>>>+	} else if (cpu_is_at91sam9263()) {
> >>>>+		at91_cpuidle_device.dev.platform_data = at91sam9263_standby;
> >>>>+	} else {
> >>>>+		at91_cpuidle_device.dev.platform_data = at91sam9_standby;
> >>>no this is too dangerous when adding new SoC
> >>>
> >>>you must list the supported SoC
> >>>
> >>>and I prefer to move this code to the SoC init structure
> >>
> >>Do you mean register the platform_device in eg.
> >>at91rm9200_initialize with the right platform data ?
> >>
> >yes as example
> >
> >Best Regards,
> 
> Hi Jean-Christophe,
> 
> I did the changes but there are different drawbacks with the approach.
> The first one is the AT91_SOC_START is too early to call the
> platform_device_register. The second one is we have multiple
> declaration of the platform_device which is not really nice.
> 
> I found the following solution:
> 
> The platform_device is static in pm.c, there is a
> at91_pm_set_standby function. All AT91_SOC_START call
> at91_pm_set_standby with the right standby function callback, which
> in turns set the platform data for the cpuidle platform device. When
> the init call for pm is made, it registers the platform device.
> 
> That has the benefit to encapsulate the platform device and having
> it in a single place and also we have the information to remove the
> { if then else } statements we have in 'at91_pm_enter's case block
> for PM_SUSPEND_STANDBY.
why not

but some comment

and that was one of the reason why the else in the previous implementation was
wrong
> 
> Does it sound ok for you ?
> 
> Thanks
>   -- Daniel
> 
> diff --git a/arch/arm/mach-at91/at91rm9200.c
> b/arch/arm/mach-at91/at91rm9200.c
> index 4aad93d..0d234f2 100644
> --- a/arch/arm/mach-at91/at91rm9200.c
> +++ b/arch/arm/mach-at91/at91rm9200.c
> @@ -27,6 +27,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -337,6 +338,8 @@ static void __init at91rm9200_initialize(void)
>  	/* Initialize GPIO subsystem */
>  	at91_gpio_init(at91rm9200_gpio,
>  		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
> +
> +	at91_pm_set_standby(at91rm9200_standby);
>  }
> 
> 
> diff --git a/arch/arm/mach-at91/at91sam9260.c
> b/arch/arm/mach-at91/at91sam9260.c
> index 5de6074..9fd7aa6 100644
> --- a/arch/arm/mach-at91/at91sam9260.c
> +++ b/arch/arm/mach-at91/at91sam9260.c
> @@ -28,6 +28,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -307,7 +308,6 @@ static struct at91_gpio_bank at91sam9260_gpio[]
> __initdata = {
>  /* --------------------------------------------------------------------
>   *  AT91SAM9260 processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init at91sam9xe_map_io(void)
>  {
>  	unsigned long sram_size;
> @@ -351,6 +351,8 @@ static void __init at91sam9260_initialize(void)
> 
>  	/* Register GPIO subsystem */
>  	at91_gpio_init(at91sam9260_gpio, 3);
> +
> +	at91_pm_set_standby(at91sam9_standby);
>  }
> 
>  /* --------------------------------------------------------------------
> diff --git a/arch/arm/mach-at91/at91sam9261.c
> b/arch/arm/mach-at91/at91sam9261.c
> index 0e07932..1edbb6f 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -27,6 +27,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -293,6 +294,8 @@ static void __init at91sam9261_initialize(void)
> 
>  	/* Register GPIO subsystem */
>  	at91_gpio_init(at91sam9261_gpio, 3);
> +
> +	at91_pm_set_sandby(at91sam9_standby);
>  }
> 
>  /* --------------------------------------------------------------------
> diff --git a/arch/arm/mach-at91/at91sam9263.c
> b/arch/arm/mach-at91/at91sam9263.c
> index 6ce7d18..b222d59 100644
> --- a/arch/arm/mach-at91/at91sam9263.c
> +++ b/arch/arm/mach-at91/at91sam9263.c
> @@ -26,6 +26,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -304,7 +305,6 @@ static struct at91_gpio_bank at91sam9263_gpio[]
> __initdata = {
>  /* --------------------------------------------------------------------
>   *  AT91SAM9263 processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init at91sam9263_map_io(void)
>  {
>  	at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE);
> @@ -330,6 +330,8 @@ static void __init at91sam9263_initialize(void)
> 
>  	/* Register GPIO subsystem */
>  	at91_gpio_init(at91sam9263_gpio, 5);
> +
> +	at91_pm_set_standby(at91sam9263_standby);
>  }
> 
>  /* --------------------------------------------------------------------
> diff --git a/arch/arm/mach-at91/at91sam9g45.c
> b/arch/arm/mach-at91/at91sam9g45.c
> index 474ee04..4186f37 100644
> --- a/arch/arm/mach-at91/at91sam9g45.c
> +++ b/arch/arm/mach-at91/at91sam9g45.c
> @@ -26,6 +26,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -355,7 +356,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[]
> __initdata = {
>  /* --------------------------------------------------------------------
>   *  AT91SAM9G45 processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init at91sam9g45_map_io(void)
>  {
>  	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
> @@ -379,6 +379,8 @@ static void __init at91sam9g45_initialize(void)
> 
>  	/* Register GPIO subsystem */
>  	at91_gpio_init(at91sam9g45_gpio, 5);
> +
> +	at91_pm_set_standby(at91sam9g45_standby);
>  }
> 
>  /* --------------------------------------------------------------------
> diff --git a/arch/arm/mach-at91/at91sam9n12.c
> b/arch/arm/mach-at91/at91sam9n12.c
> index c7d670d..cc61e09 100644
> --- a/arch/arm/mach-at91/at91sam9n12.c
> +++ b/arch/arm/mach-at91/at91sam9n12.c
> @@ -21,6 +21,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -217,13 +218,18 @@ static void __init at91sam9n12_register_clocks(void)
>  /* --------------------------------------------------------------------
>   *  AT91SAM9N12 processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init at91sam9n12_map_io(void)
>  {
>  	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
>  }
> 
> +static void __init at91sam9n12_initialize(void)
> +{
this is wrong we use a ddr comtroller not the same as the sam9
> +	at91_pm_set_standby(at91sam9_standby);
> +}
> +
>  AT91_SOC_START(at91sam9n12)
>  	.map_io = at91sam9n12_map_io,
>  	.register_clocks = at91sam9n12_register_clocks,
> +	.init = at91sam9n12_initialize,
>  AT91_SOC_END
> diff --git a/arch/arm/mach-at91/at91sam9rl.c
> b/arch/arm/mach-at91/at91sam9rl.c
> index d4ec0d9..b0c8cb6 100644
> --- a/arch/arm/mach-at91/at91sam9rl.c
> +++ b/arch/arm/mach-at91/at91sam9rl.c
> @@ -27,6 +27,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -261,7 +262,6 @@ static struct at91_gpio_bank at91sam9rl_gpio[]
> __initdata = {
>  /* --------------------------------------------------------------------
>   *  AT91SAM9RL processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init at91sam9rl_map_io(void)
>  {
>  	unsigned long sram_size;
> @@ -296,6 +296,8 @@ static void __init at91sam9rl_initialize(void)
> 
>  	/* Register GPIO subsystem */
>  	at91_gpio_init(at91sam9rl_gpio, 4);
> +
> +	at91_pm_set_standby(at91sam9_standby);
>  }
> 
>  /* --------------------------------------------------------------------
> diff --git a/arch/arm/mach-at91/at91sam9x5.c
> b/arch/arm/mach-at91/at91sam9x5.c
> index 916e5a1..9ef7bc6 100644
> --- a/arch/arm/mach-at91/at91sam9x5.c
> +++ b/arch/arm/mach-at91/at91sam9x5.c
> @@ -21,6 +21,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -316,12 +317,15 @@ static void __init at91sam9x5_register_clocks(void)
>  /* --------------------------------------------------------------------
>   *  AT91SAM9x5 processor initialization
>   * -------------------------------------------------------------------- */
> -
??
>  static void __init at91sam9x5_map_io(void)
>  {
>  	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
>  }
> 
> +static void __init at91sam9x5_initialize(void)
> +{
this is wrong we use a ddr comtroller not the same as the sam9
> +	at91_pm_set_standby(at91sam9_standby);
> +}
>  /* --------------------------------------------------------------------
>   *  Interrupt initialization
>   * -------------------------------------------------------------------- */
> @@ -329,4 +333,5 @@ static void __init at91sam9x5_map_io(void)
>  AT91_SOC_START(at91sam9x5)
>  	.map_io = at91sam9x5_map_io,
>  	.register_clocks = at91sam9x5_register_clocks,
> +	.init = at91sam9x5_initialize,
>  AT91_SOC_END
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index debdbf8..42b955c 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -318,6 +318,11 @@ static struct platform_device at91_cpuidle_device = {
>  	.name = "cpuidle-at91",
>  };
> 
> +void at91_pm_set_standby(void (*at91_standby)(void))
> +{
> +	at91_cpuidle_device.dev.platform_data = at91_standby;	
> +}
> +
>  static int __init at91_pm_init(void)
>  {
>  #ifdef CONFIG_AT91_SLOW_CLOCK
> @@ -327,16 +332,8 @@ static int __init at91_pm_init(void)
>  	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow
> clock mode)" : ""));
> 
>  	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
> -	if (cpu_is_at91rm9200()) {
> -		at91_cpuidle_device.dev.platform_data = at91rm9200_standby;
> +	if (cpu_is_at91rm9200())
>  		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
> -	} else if (cpu_is_at91sam9g45()) {
> -		at91_cpuidle_device.dev.platform_data = at91sam9g45_standby;
> -	} else if (cpu_is_at91sam9263()) {
> -		at91_cpuidle_device.dev.platform_data = at91sam9263_standby;
> -	} else {
> -		at91_cpuidle_device.dev.platform_data = at91sam9_standby;
> -	}
>  	

only register it if the call back is set
>  	platform_device_register(&at91_cpuidle_device);
> 
> diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
> index 2f5908f..76dd1a7 100644
> --- a/arch/arm/mach-at91/pm.h
> +++ b/arch/arm/mach-at91/pm.h
> @@ -11,9 +11,13 @@
>  #ifndef __ARCH_ARM_MACH_AT91_PM
>  #define __ARCH_ARM_MACH_AT91_PM
> 
> +#include <asm/proc-fns.h>
> +
>  #include <mach/at91_ramc.h>
>  #include <mach/at91rm9200_sdramc.h>
> 
> +extern void at91_pm_set_standby(void (*at91_standby)(void));
> +
>  /*
>   * The AT91RM9200 goes into self-refresh mode with this command, and will
>   * terminate self-refresh automatically on the next SDRAM access.
> diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
> index 4012797..9a53db6 100644
> --- a/arch/arm/mach-at91/sama5d3.c
> +++ b/arch/arm/mach-at91/sama5d3.c
> @@ -21,6 +21,7 @@
>  #include "generic.h"
>  #include "clock.h"
>  #include "sam9_smc.h"
> +#include "pm.h"
> 
>  /* --------------------------------------------------------------------
>   *  Clocks
> @@ -365,13 +366,18 @@ static void __init sama5d3_register_clocks(void)
>  /* --------------------------------------------------------------------
>   *  AT91SAM9x5 processor initialization
>   * -------------------------------------------------------------------- */
> -
>  static void __init sama5d3_map_io(void)
>  {
>  	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
>  }
> 
> +static void __init sama5d3_initialize(void)
> +{
this is wrong we use a ddr comtroller not the same as the sam9
> +	at91_set_standby(at91sam9_standby);
> +}
> +
>  AT91_SOC_START(sama5d3)
>  	.map_io = sama5d3_map_io,
>  	.register_clocks = sama5d3_register_clocks,
> +	.init = sama5d3_initialize,
>  AT91_SOC_END
> 
> 

Best Regards,
J.

On 10/14/2013 07:18 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 18:30 Mon 14 Oct     , Daniel Lezcano wrote:
>> On 10/14/2013 04:27 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>> On 16:18 Mon 14 Oct     , Daniel Lezcano wrote:
>>>> On 10/14/2013 04:04 PM, Jean-Christophe PLAGNIOL-VILLARD wrote:
>>>>> On 17:51 Sat 12 Oct     , Daniel Lezcano wrote:
>>>>>> Use the platform driver model to separate the cpuidle specific code from
>>>>>> the low level pm code. It allows to remove the dependency between
>>>>>> these two components.
>>>>>>
>>>>>> Tested-on usb-a9263 (at91sam9263)
>>>>>>
>>>>>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>>
>> [ ... ]
>>
>>>>>> ---
>>>>>>   	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
>>>>>> -	if (cpu_is_at91rm9200())
>>>>>> +	if (cpu_is_at91rm9200()) {
>>>>>> +		at91_cpuidle_device.dev.platform_data = at91rm9200_standby;
>>>>>>   		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
>>>>>> +	} else if (cpu_is_at91sam9g45()) {
>>>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9g45_standby;
>>>>>> +	} else if (cpu_is_at91sam9263()) {
>>>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9263_standby;
>>>>>> +	} else {
>>>>>> +		at91_cpuidle_device.dev.platform_data = at91sam9_standby;
>>>>> no this is too dangerous when adding new SoC
>>>>>
>>>>> you must list the supported SoC
>>>>>
>>>>> and I prefer to move this code to the SoC init structure
>>>>
>>>> Do you mean register the platform_device in eg.
>>>> at91rm9200_initialize with the right platform data ?
>>>>
>>> yes as example
>>>
>>> Best Regards,
>>
>> Hi Jean-Christophe,
>>
>> I did the changes but there are different drawbacks with the approach.
>> The first one is the AT91_SOC_START is too early to call the
>> platform_device_register. The second one is we have multiple
>> declaration of the platform_device which is not really nice.
>>
>> I found the following solution:
>>
>> The platform_device is static in pm.c, there is a
>> at91_pm_set_standby function. All AT91_SOC_START call
>> at91_pm_set_standby with the right standby function callback, which
>> in turns set the platform data for the cpuidle platform device. When
>> the init call for pm is made, it registers the platform device.
>>
>> That has the benefit to encapsulate the platform device and having
>> it in a single place and also we have the information to remove the
>> { if then else } statements we have in 'at91_pm_enter's case block
>> for PM_SUSPEND_STANDBY.
> why not
>
> but some comment
>
> and that was one of the reason why the else in the previous implementation was
> wrong

Ok, I see.

I will send a V2.

Thanks for the review !

   -- Daniel

>>
>> Does it sound ok for you ?
>>
>> Thanks
>>    -- Daniel
>>
>> diff --git a/arch/arm/mach-at91/at91rm9200.c
>> b/arch/arm/mach-at91/at91rm9200.c
>> index 4aad93d..0d234f2 100644
>> --- a/arch/arm/mach-at91/at91rm9200.c
>> +++ b/arch/arm/mach-at91/at91rm9200.c
>> @@ -27,6 +27,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -337,6 +338,8 @@ static void __init at91rm9200_initialize(void)
>>   	/* Initialize GPIO subsystem */
>>   	at91_gpio_init(at91rm9200_gpio,
>>   		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
>> +
>> +	at91_pm_set_standby(at91rm9200_standby);
>>   }
>>
>>
>> diff --git a/arch/arm/mach-at91/at91sam9260.c
>> b/arch/arm/mach-at91/at91sam9260.c
>> index 5de6074..9fd7aa6 100644
>> --- a/arch/arm/mach-at91/at91sam9260.c
>> +++ b/arch/arm/mach-at91/at91sam9260.c
>> @@ -28,6 +28,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -307,7 +308,6 @@ static struct at91_gpio_bank at91sam9260_gpio[]
>> __initdata = {
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9260 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init at91sam9xe_map_io(void)
>>   {
>>   	unsigned long sram_size;
>> @@ -351,6 +351,8 @@ static void __init at91sam9260_initialize(void)
>>
>>   	/* Register GPIO subsystem */
>>   	at91_gpio_init(at91sam9260_gpio, 3);
>> +
>> +	at91_pm_set_standby(at91sam9_standby);
>>   }
>>
>>   /* --------------------------------------------------------------------
>> diff --git a/arch/arm/mach-at91/at91sam9261.c
>> b/arch/arm/mach-at91/at91sam9261.c
>> index 0e07932..1edbb6f 100644
>> --- a/arch/arm/mach-at91/at91sam9261.c
>> +++ b/arch/arm/mach-at91/at91sam9261.c
>> @@ -27,6 +27,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -293,6 +294,8 @@ static void __init at91sam9261_initialize(void)
>>
>>   	/* Register GPIO subsystem */
>>   	at91_gpio_init(at91sam9261_gpio, 3);
>> +
>> +	at91_pm_set_sandby(at91sam9_standby);
>>   }
>>
>>   /* --------------------------------------------------------------------
>> diff --git a/arch/arm/mach-at91/at91sam9263.c
>> b/arch/arm/mach-at91/at91sam9263.c
>> index 6ce7d18..b222d59 100644
>> --- a/arch/arm/mach-at91/at91sam9263.c
>> +++ b/arch/arm/mach-at91/at91sam9263.c
>> @@ -26,6 +26,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -304,7 +305,6 @@ static struct at91_gpio_bank at91sam9263_gpio[]
>> __initdata = {
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9263 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init at91sam9263_map_io(void)
>>   {
>>   	at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE);
>> @@ -330,6 +330,8 @@ static void __init at91sam9263_initialize(void)
>>
>>   	/* Register GPIO subsystem */
>>   	at91_gpio_init(at91sam9263_gpio, 5);
>> +
>> +	at91_pm_set_standby(at91sam9263_standby);
>>   }
>>
>>   /* --------------------------------------------------------------------
>> diff --git a/arch/arm/mach-at91/at91sam9g45.c
>> b/arch/arm/mach-at91/at91sam9g45.c
>> index 474ee04..4186f37 100644
>> --- a/arch/arm/mach-at91/at91sam9g45.c
>> +++ b/arch/arm/mach-at91/at91sam9g45.c
>> @@ -26,6 +26,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -355,7 +356,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[]
>> __initdata = {
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9G45 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init at91sam9g45_map_io(void)
>>   {
>>   	at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
>> @@ -379,6 +379,8 @@ static void __init at91sam9g45_initialize(void)
>>
>>   	/* Register GPIO subsystem */
>>   	at91_gpio_init(at91sam9g45_gpio, 5);
>> +
>> +	at91_pm_set_standby(at91sam9g45_standby);
>>   }
>>
>>   /* --------------------------------------------------------------------
>> diff --git a/arch/arm/mach-at91/at91sam9n12.c
>> b/arch/arm/mach-at91/at91sam9n12.c
>> index c7d670d..cc61e09 100644
>> --- a/arch/arm/mach-at91/at91sam9n12.c
>> +++ b/arch/arm/mach-at91/at91sam9n12.c
>> @@ -21,6 +21,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -217,13 +218,18 @@ static void __init at91sam9n12_register_clocks(void)
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9N12 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init at91sam9n12_map_io(void)
>>   {
>>   	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
>>   }
>>
>> +static void __init at91sam9n12_initialize(void)
>> +{
> this is wrong we use a ddr comtroller not the same as the sam9
>> +	at91_pm_set_standby(at91sam9_standby);
>> +}
>> +
>>   AT91_SOC_START(at91sam9n12)
>>   	.map_io = at91sam9n12_map_io,
>>   	.register_clocks = at91sam9n12_register_clocks,
>> +	.init = at91sam9n12_initialize,
>>   AT91_SOC_END
>> diff --git a/arch/arm/mach-at91/at91sam9rl.c
>> b/arch/arm/mach-at91/at91sam9rl.c
>> index d4ec0d9..b0c8cb6 100644
>> --- a/arch/arm/mach-at91/at91sam9rl.c
>> +++ b/arch/arm/mach-at91/at91sam9rl.c
>> @@ -27,6 +27,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -261,7 +262,6 @@ static struct at91_gpio_bank at91sam9rl_gpio[]
>> __initdata = {
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9RL processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init at91sam9rl_map_io(void)
>>   {
>>   	unsigned long sram_size;
>> @@ -296,6 +296,8 @@ static void __init at91sam9rl_initialize(void)
>>
>>   	/* Register GPIO subsystem */
>>   	at91_gpio_init(at91sam9rl_gpio, 4);
>> +
>> +	at91_pm_set_standby(at91sam9_standby);
>>   }
>>
>>   /* --------------------------------------------------------------------
>> diff --git a/arch/arm/mach-at91/at91sam9x5.c
>> b/arch/arm/mach-at91/at91sam9x5.c
>> index 916e5a1..9ef7bc6 100644
>> --- a/arch/arm/mach-at91/at91sam9x5.c
>> +++ b/arch/arm/mach-at91/at91sam9x5.c
>> @@ -21,6 +21,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -316,12 +317,15 @@ static void __init at91sam9x5_register_clocks(void)
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9x5 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
> ??
>>   static void __init at91sam9x5_map_io(void)
>>   {
>>   	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
>>   }
>>
>> +static void __init at91sam9x5_initialize(void)
>> +{
> this is wrong we use a ddr comtroller not the same as the sam9
>> +	at91_pm_set_standby(at91sam9_standby);
>> +}
>>   /* --------------------------------------------------------------------
>>    *  Interrupt initialization
>>    * -------------------------------------------------------------------- */
>> @@ -329,4 +333,5 @@ static void __init at91sam9x5_map_io(void)
>>   AT91_SOC_START(at91sam9x5)
>>   	.map_io = at91sam9x5_map_io,
>>   	.register_clocks = at91sam9x5_register_clocks,
>> +	.init = at91sam9x5_initialize,
>>   AT91_SOC_END
>> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
>> index debdbf8..42b955c 100644
>> --- a/arch/arm/mach-at91/pm.c
>> +++ b/arch/arm/mach-at91/pm.c
>> @@ -318,6 +318,11 @@ static struct platform_device at91_cpuidle_device = {
>>   	.name = "cpuidle-at91",
>>   };
>>
>> +void at91_pm_set_standby(void (*at91_standby)(void))
>> +{
>> +	at91_cpuidle_device.dev.platform_data = at91_standby;	
>> +}
>> +
>>   static int __init at91_pm_init(void)
>>   {
>>   #ifdef CONFIG_AT91_SLOW_CLOCK
>> @@ -327,16 +332,8 @@ static int __init at91_pm_init(void)
>>   	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow
>> clock mode)" : ""));
>>
>>   	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
>> -	if (cpu_is_at91rm9200()) {
>> -		at91_cpuidle_device.dev.platform_data = at91rm9200_standby;
>> +	if (cpu_is_at91rm9200())
>>   		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
>> -	} else if (cpu_is_at91sam9g45()) {
>> -		at91_cpuidle_device.dev.platform_data = at91sam9g45_standby;
>> -	} else if (cpu_is_at91sam9263()) {
>> -		at91_cpuidle_device.dev.platform_data = at91sam9263_standby;
>> -	} else {
>> -		at91_cpuidle_device.dev.platform_data = at91sam9_standby;
>> -	}
>>   	
>
> only register it if the call back is set
>>   	platform_device_register(&at91_cpuidle_device);
>>
>> diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
>> index 2f5908f..76dd1a7 100644
>> --- a/arch/arm/mach-at91/pm.h
>> +++ b/arch/arm/mach-at91/pm.h
>> @@ -11,9 +11,13 @@
>>   #ifndef __ARCH_ARM_MACH_AT91_PM
>>   #define __ARCH_ARM_MACH_AT91_PM
>>
>> +#include <asm/proc-fns.h>
>> +
>>   #include <mach/at91_ramc.h>
>>   #include <mach/at91rm9200_sdramc.h>
>>
>> +extern void at91_pm_set_standby(void (*at91_standby)(void));
>> +
>>   /*
>>    * The AT91RM9200 goes into self-refresh mode with this command, and will
>>    * terminate self-refresh automatically on the next SDRAM access.
>> diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
>> index 4012797..9a53db6 100644
>> --- a/arch/arm/mach-at91/sama5d3.c
>> +++ b/arch/arm/mach-at91/sama5d3.c
>> @@ -21,6 +21,7 @@
>>   #include "generic.h"
>>   #include "clock.h"
>>   #include "sam9_smc.h"
>> +#include "pm.h"
>>
>>   /* --------------------------------------------------------------------
>>    *  Clocks
>> @@ -365,13 +366,18 @@ static void __init sama5d3_register_clocks(void)
>>   /* --------------------------------------------------------------------
>>    *  AT91SAM9x5 processor initialization
>>    * -------------------------------------------------------------------- */
>> -
>>   static void __init sama5d3_map_io(void)
>>   {
>>   	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
>>   }
>>
>> +static void __init sama5d3_initialize(void)
>> +{
> this is wrong we use a ddr comtroller not the same as the sam9
>> +	at91_set_standby(at91sam9_standby);
>> +}
>> +
>>   AT91_SOC_START(sama5d3)
>>   	.map_io = sama5d3_map_io,
>>   	.register_clocks = sama5d3_register_clocks,
>> +	.init = sama5d3_initialize,
>>   AT91_SOC_END
>>
>>
>
> Best Regards,
> J.
>