@@ -17,9 +17,13 @@ config REALVIEW_DT
bool "Support RealView(R) Device Tree based boot"
select ARM_GIC
select CLK_SP810
- select HAVE_SMP
+ select CPU_ARM926T if ARCH_MULTI_V5
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select HAVE_PATA_PLATFORM
+ select HAVE_SMP if ARCH_MULTI_V6
+ select HAVE_TCM
select ICST
- select MACH_REALVIEW_EB if ARCH_MULTI_V5
select MFD_SYSCON
select POWER_RESET
select POWER_RESET_VERSATILE
@@ -27,129 +31,14 @@ config REALVIEW_DT
select SMP_ON_UP if SMP
select SOC_REALVIEW
select USE_OF
+ select ZONE_DMA
help
Include support for booting the ARM(R) RealView(R) evaluation
boards using a device tree machine description.
-config MACH_REALVIEW_EB
- bool "Support RealView(R) Emulation Baseboard"
- select ARM_GIC
- select CPU_ARM926T if ARCH_MULTI_V5
- help
- Include support for the ARM(R) RealView(R) Emulation Baseboard
- platform. On an ARMv5 kernel, this will include support for
- the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
- one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
- core tile options should be enabled.
-
-config REALVIEW_EB_ARM1136
- bool "Support ARM1136J(F)-S Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- select CPU_V6
- help
- Enable support for the ARM1136 tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM1176
- bool "Support ARM1176JZ(F)-S Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- help
- Enable support for the ARM1176 tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_A9MP
- bool "Support Multicore Cortex-A9 Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Enable support for the Cortex-A9MPCore tile fitted to the
- Realview(R) Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP
- bool "Support ARM11MPCore Tile"
- depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Enable support for the ARM11MPCore tile fitted to the Realview(R)
- Emulation Baseboard platform.
-
-config REALVIEW_EB_ARM11MP_REVB
- bool "Support ARM11MPCore RevB Tile"
- depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
- help
- Enable support for the ARM11MPCore Revision B tile on the
- Realview(R) Emulation Baseboard platform. Since there are device
- address differences, a kernel built with this option enabled is
- not compatible with other revisions of the ARM11MPCore tile.
-
-config MACH_REALVIEW_PB11MP
- bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- depends on ARCH_MULTI_V6
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard for
- the ARM11MPCore. This platform has an on-board ARM11MPCore and has
- support for PCI-E and Compact Flash.
-
-# ARMv6 CPU without K extensions, but does have the new exclusive ops
-config MACH_REALVIEW_PB1176
- bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
- depends on ARCH_MULTI_V6
- select ARM_GIC
- select CPU_V6
- select HAVE_TCM
- select MIGHT_HAVE_CACHE_L2X0
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard for
- ARM1176JZF-S.
-
-config REALVIEW_PB1176_SECURE_FLASH
- bool "Allow access to the secure flash memory block"
- depends on MACH_REALVIEW_PB1176
- default n
- help
- Select this option if Linux will only run in secure mode on the
- RealView PB1176 platform and access to the secure flash memory
- block (64MB @ 0x3c000000) is required.
-
-config MACH_REALVIEW_PBA8
- bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
- depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_PATA_PLATFORM
- help
- Include support for the ARM(R) RealView Platform Baseboard for
- Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has
- support for PCI-E and Compact Flash.
-
-config MACH_REALVIEW_PBX
- bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
- depends on ARCH_MULTI_V7
- select ARM_GIC
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_PATA_PLATFORM
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select ZONE_DMA
- help
- Include support for the ARM(R) RealView(R) Platform Baseboard
- Explore.
-
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
- depends on MMU && !MACH_REALVIEW_PB1176
+ depends on MMU
default y
help
RealView boards other than PB1176 have the RAM available at
We select all we need to the device tree boot and and do not really need all the sub-options to get this running smoothly. We will support the ARMv5, ARMv6, ARMv7 or ARMv6+ARMv7 build depending on what the user selects. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-realview/Kconfig | 127 +++-------------------------------------- 1 file changed, 8 insertions(+), 119 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel