| Message ID | 1481091204-6559-1-git-send-email-baoyou.xie@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Wed, Dec 07, 2016 at 02:13:22PM +0800, Baoyou Xie wrote: > The ARMv8 2967 family (296718, 296716 etc) uses different value > for controlling the power domain on/off registers, Choose the > value depending on the compatible. > > Multiple domains are prepared for the family, this patch prepares > the common functions. > > Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> > --- > drivers/soc/Kconfig | 1 + > drivers/soc/Makefile | 1 + > drivers/soc/zte/Kconfig | 13 ++++ > drivers/soc/zte/Makefile | 4 ++ > drivers/soc/zte/pm_domains.c | 150 +++++++++++++++++++++++++++++++++++++++++++ > drivers/soc/zte/pm_domains.h | 48 ++++++++++++++ > 6 files changed, 217 insertions(+) > create mode 100644 drivers/soc/zte/Kconfig > create mode 100644 drivers/soc/zte/Makefile > create mode 100644 drivers/soc/zte/pm_domains.c > create mode 100644 drivers/soc/zte/pm_domains.h > > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig > index f31bceb..f09023f 100644 > --- a/drivers/soc/Kconfig > +++ b/drivers/soc/Kconfig > @@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig" > source "drivers/soc/ti/Kconfig" > source "drivers/soc/ux500/Kconfig" > source "drivers/soc/versatile/Kconfig" > +source "drivers/soc/zte/Kconfig" > > endmenu > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile > index 50c23d0..05eae52 100644 > --- a/drivers/soc/Makefile > +++ b/drivers/soc/Makefile > @@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ > obj-$(CONFIG_SOC_TI) += ti/ > obj-$(CONFIG_ARCH_U8500) += ux500/ > obj-$(CONFIG_PLAT_VERSATILE) += versatile/ > +obj-$(CONFIG_ARCH_ZX) += zte/ > diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig > new file mode 100644 > index 0000000..4953c3fa > --- /dev/null > +++ b/drivers/soc/zte/Kconfig > @@ -0,0 +1,13 @@ > +# > +# zx SoC drivers > +# > +menuconfig SOC_ZX Can we use SOC_ZTE to reflect the folder name 'zte'? If we take drivers/soc/samsung/Kconfig as example, SAMSUNG is like ZTE, while EXYNOS is like ZX, I guess. > + bool "zx SoC driver support" > + > +if SOC_ZX > + > +config ZX_PM_DOMAINS > + bool "zx PM domains" > + depends on PM_GENERIC_DOMAINS > + > +endif > diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile > new file mode 100644 > index 0000000..97ac8ea > --- /dev/null > +++ b/drivers/soc/zte/Makefile > @@ -0,0 +1,4 @@ > +# > +# zx SOC drivers > +# > +obj-$(CONFIG_ZX_PM_DOMAINS) += pm_domains.o > diff --git a/drivers/soc/zte/pm_domains.c b/drivers/soc/zte/pm_domains.c > new file mode 100644 > index 0000000..e4d1235 > --- /dev/null > +++ b/drivers/soc/zte/pm_domains.c > @@ -0,0 +1,150 @@ > +/* > + * Copyright (C) 2015 ZTE Ltd. Do we at least need year 2016? > + * > + * Author: Baoyou Xie <baoyou.xie@linaro.org> > + * License terms: GNU General Public License (GPL) version 2 I see drivers/soc/zte/pm_domains.h use a different licence format. Can we make them unified? > + */ > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include "pm_domains.h" > + > +#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN]) > +#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN]) > +#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN]) > +#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN]) > +#define PCU_DM_PWRDN(zpd) ((zpd)->reg_offset[REG_PWRDN]) > +#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC]) > + > +static void __iomem *pcubase; > + > +int zx_normal_power_on(struct generic_pm_domain *domain) What does 'normal' in the function name mean? > +{ > + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; > + unsigned long loop = 1000; > + u32 val; > + > + if (zpd->polarity == PWREN) { > + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); > + val |= BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); > + } else { > + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); > + } > + > + do { > + udelay(1); > + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) > + & BIT(zpd->bit); > + } while (--loop && !val); > + > + if (!loop) { > + pr_err("Error: %s %s fail\n", __func__, domain->name); > + return -EIO; > + } > + > + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_RSTEN(zpd)); For a single bit setting, it can be as simple as the following, right? val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); val |= BIT(zpd->bit); writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_CLKEN(zpd)); Ditto > + udelay(5); > + > + pr_info("normal poweron %s\n", domain->name); Do we really want to see a message on every single power domain on/off function call? A pr_debug is better? > + > + return 0; > +} > + > +int zx_normal_power_off(struct generic_pm_domain *domain) > +{ > + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; > + unsigned long loop = 1000; > + u32 val; > + > + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_ISOEN(zpd)); Same here. > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); > + udelay(5); > + > + if (zpd->polarity == PWREN) { > + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); > + } else { > + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); > + val |= BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); > + } > + > + do { > + udelay(1); > + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) > + & BIT(zpd->bit); > + } while (--loop && val); > + > + if (!loop) { > + pr_err("Error: %s %s fail\n", __func__, domain->name); > + return -EIO; > + } > + > + pr_info("normal poweroff %s\n", domain->name); pr_debug > + > + return 0; > +} > + > +int > +zx_pd_probe(struct platform_device *pdev, I do not see the need to break above two lines. > + struct generic_pm_domain **zx_pm_domains, > + int domain_num) As long as the line doesn't exceed column 80, we do not need to break the line into two. > +{ > + struct genpd_onecell_data *genpd_data; > + struct resource *res; > + int i; > + > + genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); > + if (!genpd_data) > + return -ENOMEM; > + > + genpd_data->domains = zx_pm_domains; > + genpd_data->num_domains = domain_num; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "no memory resource defined\n"); > + return -ENODEV; > + } The error check on 'res' is not really necessary, as devm_ioremap_resource() will do that for you. > + > + pcubase = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(pcubase)) { > + dev_err(&pdev->dev, "ioremap fail.\n"); > + return -EIO; PTR_ERR(pcubase) should be returned as error code here. > + } > + > + for (i = 0; i < domain_num; ++i) > + pm_genpd_init(zx_pm_domains[i], NULL, false); > + > + of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); > + dev_info(&pdev->dev, "powerdomain init ok\n"); > + return 0; > +} > diff --git a/drivers/soc/zte/pm_domains.h b/drivers/soc/zte/pm_domains.h > new file mode 100644 > index 0000000..d3a52fd > --- /dev/null > +++ b/drivers/soc/zte/pm_domains.h > @@ -0,0 +1,48 @@ > +/* > + * Copyright (c) 2015 ZTE Co., Ltd. > + * http://www.zte.com.cn > + * > + * Header for ZTE's Power Domain Driver support > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#ifndef __ZTE_PM_DOMAIN_H > +#define __ZTE_PM_DOMAIN_H > + > +#include <linux/platform_device.h> > +#include <linux/pm_domain.h> > + > +enum { > + REG_CLKEN, > + REG_ISOEN, > + REG_RSTEN, > + REG_PWREN, > + REG_PWRDN, > + REG_ACK_SYNC, > + > + /* The size of the array - must be last */ > + REG_ARRAY_SIZE, > +}; > + > +enum zx_power_polarity { > + PWREN, > + PWRDN, > +}; > + > +struct zx_pm_domain { > + struct generic_pm_domain dm; You can chose to have more tabs between 'generic_pm_domain' and 'dm' for indention, but there should always be one space between 'struct' and 'generic_pm_domain'. > + const u16 bit; > + const enum zx_power_polarity polarity; > + const u16 *reg_offset; > +}; > + > +extern int zx_normal_power_on(struct generic_pm_domain *domain); > +extern int zx_normal_power_off(struct generic_pm_domain *domain); > +extern int > +zx_pd_probe(struct platform_device *pdev, > + struct generic_pm_domain **zx_pm_domains, > + int domain_num); We do not need to break it into so many lines. > +#endif /* __ZTE_PM_DOMAIN_H */ > -- > 2.7.4 >
2016-12-07 14:13 GMT+08:00 Baoyou Xie <baoyou.xie@linaro.org>: > The ARMv8 2967 family (296718, 296716 etc) uses different value > for controlling the power domain on/off registers, Choose the > value depending on the compatible. > > Multiple domains are prepared for the family, this patch prepares > the common functions. > > Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> > --- > drivers/soc/Kconfig | 1 + > drivers/soc/Makefile | 1 + > drivers/soc/zte/Kconfig | 13 ++++ > drivers/soc/zte/Makefile | 4 ++ > drivers/soc/zte/pm_domains.c | 150 +++++++++++++++++++++++++++++++++++++++++++ > drivers/soc/zte/pm_domains.h | 48 ++++++++++++++ > 6 files changed, 217 insertions(+) > create mode 100644 drivers/soc/zte/Kconfig > create mode 100644 drivers/soc/zte/Makefile > create mode 100644 drivers/soc/zte/pm_domains.c > create mode 100644 drivers/soc/zte/pm_domains.h > > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig > index f31bceb..f09023f 100644 > --- a/drivers/soc/Kconfig > +++ b/drivers/soc/Kconfig > @@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig" > source "drivers/soc/ti/Kconfig" > source "drivers/soc/ux500/Kconfig" > source "drivers/soc/versatile/Kconfig" > +source "drivers/soc/zte/Kconfig" > > endmenu > diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile > index 50c23d0..05eae52 100644 > --- a/drivers/soc/Makefile > +++ b/drivers/soc/Makefile > @@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ > obj-$(CONFIG_SOC_TI) += ti/ > obj-$(CONFIG_ARCH_U8500) += ux500/ > obj-$(CONFIG_PLAT_VERSATILE) += versatile/ > +obj-$(CONFIG_ARCH_ZX) += zte/ > diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig > new file mode 100644 > index 0000000..4953c3fa > --- /dev/null > +++ b/drivers/soc/zte/Kconfig > @@ -0,0 +1,13 @@ > +# > +# zx SoC drivers > +# > +menuconfig SOC_ZX > + bool "zx SoC driver support" > + > +if SOC_ZX > + > +config ZX_PM_DOMAINS > + bool "zx PM domains" > + depends on PM_GENERIC_DOMAINS > + > +endif > diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile > new file mode 100644 > index 0000000..97ac8ea > --- /dev/null > +++ b/drivers/soc/zte/Makefile > @@ -0,0 +1,4 @@ > +# > +# zx SOC drivers > +# > +obj-$(CONFIG_ZX_PM_DOMAINS) += pm_domains.o > diff --git a/drivers/soc/zte/pm_domains.c b/drivers/soc/zte/pm_domains.c > new file mode 100644 > index 0000000..e4d1235 > --- /dev/null > +++ b/drivers/soc/zte/pm_domains.c > @@ -0,0 +1,150 @@ > +/* > + * Copyright (C) 2015 ZTE Ltd. > + * > + * Author: Baoyou Xie <baoyou.xie@linaro.org> > + * License terms: GNU General Public License (GPL) version 2 > + */ > +#include <linux/delay.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include "pm_domains.h" > + > +#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN]) > +#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN]) > +#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN]) > +#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN]) > +#define PCU_DM_PWRDN(zpd) ((zpd)->reg_offset[REG_PWRDN]) > +#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC]) > + > +static void __iomem *pcubase; > + > +int zx_normal_power_on(struct generic_pm_domain *domain) > +{ > + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; > + unsigned long loop = 1000; > + u32 val; > + > + if (zpd->polarity == PWREN) { > + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); > + val |= BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); > + } else { > + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); > + } Only manipulate value in if/else clause can save 3 lines of register read/write and keep code simple. > + > + do { > + udelay(1); > + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) > + & BIT(zpd->bit); > + } while (--loop && !val); > + > + if (!loop) { > + pr_err("Error: %s %s fail\n", __func__, domain->name); > + return -EIO; > + } > + > + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_RSTEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_CLKEN(zpd)); > + udelay(5); > + > + pr_info("normal poweron %s\n", domain->name); > + > + return 0; > +} > + > +int zx_normal_power_off(struct generic_pm_domain *domain) > +{ > + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; > + unsigned long loop = 1000; > + u32 val; > + > + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_ISOEN(zpd)); > + udelay(5); > + > + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); > + udelay(5); > + > + if (zpd->polarity == PWREN) { > + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); > + val &= ~BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); > + } else { > + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); > + val |= BIT(zpd->bit); > + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); > + } Ditto. > + > + do { > + udelay(1); > + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) > + & BIT(zpd->bit); > + } while (--loop && val); > + > + if (!loop) { > + pr_err("Error: %s %s fail\n", __func__, domain->name); > + return -EIO; > + } > + > + pr_info("normal poweroff %s\n", domain->name); > + > + return 0; > +} > + > +int > +zx_pd_probe(struct platform_device *pdev, > + struct generic_pm_domain **zx_pm_domains, > + int domain_num) Alignment should match open parenthesis. One more space is needed here. You do not need a single line for int. > +{ > + struct genpd_onecell_data *genpd_data; > + struct resource *res; > + int i; > + > + genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); > + if (!genpd_data) > + return -ENOMEM; > + > + genpd_data->domains = zx_pm_domains; > + genpd_data->num_domains = domain_num; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "no memory resource defined\n"); > + return -ENODEV; > + } > + > + pcubase = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(pcubase)) { > + dev_err(&pdev->dev, "ioremap fail.\n"); > + return -EIO; > + } > + > + for (i = 0; i < domain_num; ++i) > + pm_genpd_init(zx_pm_domains[i], NULL, false); > + > + of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); > + dev_info(&pdev->dev, "powerdomain init ok\n"); > + return 0; > +} > diff --git a/drivers/soc/zte/pm_domains.h b/drivers/soc/zte/pm_domains.h > new file mode 100644 > index 0000000..d3a52fd > --- /dev/null > +++ b/drivers/soc/zte/pm_domains.h > @@ -0,0 +1,48 @@ > +/* > + * Copyright (c) 2015 ZTE Co., Ltd. > + * http://www.zte.com.cn > + * > + * Header for ZTE's Power Domain Driver support > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#ifndef __ZTE_PM_DOMAIN_H > +#define __ZTE_PM_DOMAIN_H > + > +#include <linux/platform_device.h> > +#include <linux/pm_domain.h> > + > +enum { > + REG_CLKEN, > + REG_ISOEN, > + REG_RSTEN, > + REG_PWREN, > + REG_PWRDN, > + REG_ACK_SYNC, > + > + /* The size of the array - must be last */ > + REG_ARRAY_SIZE, > +}; > + > +enum zx_power_polarity { > + PWREN, > + PWRDN, > +}; > + > +struct zx_pm_domain { > + struct generic_pm_domain dm; > + const u16 bit; > + const enum zx_power_polarity polarity; > + const u16 *reg_offset; > +}; > + > +extern int zx_normal_power_on(struct generic_pm_domain *domain); > +extern int zx_normal_power_off(struct generic_pm_domain *domain); > +extern int > +zx_pd_probe(struct platform_device *pdev, > + struct generic_pm_domain **zx_pm_domains, > + int domain_num); > +#endif /* __ZTE_PM_DOMAIN_H */ > -- > 2.7.4 >
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index f31bceb..f09023f 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig" source "drivers/soc/ti/Kconfig" source "drivers/soc/ux500/Kconfig" source "drivers/soc/versatile/Kconfig" +source "drivers/soc/zte/Kconfig" endmenu diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 50c23d0..05eae52 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_SOC_TI) += ti/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_PLAT_VERSATILE) += versatile/ +obj-$(CONFIG_ARCH_ZX) += zte/ diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig new file mode 100644 index 0000000..4953c3fa --- /dev/null +++ b/drivers/soc/zte/Kconfig @@ -0,0 +1,13 @@ +# +# zx SoC drivers +# +menuconfig SOC_ZX + bool "zx SoC driver support" + +if SOC_ZX + +config ZX_PM_DOMAINS + bool "zx PM domains" + depends on PM_GENERIC_DOMAINS + +endif diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile new file mode 100644 index 0000000..97ac8ea --- /dev/null +++ b/drivers/soc/zte/Makefile @@ -0,0 +1,4 @@ +# +# zx SOC drivers +# +obj-$(CONFIG_ZX_PM_DOMAINS) += pm_domains.o diff --git a/drivers/soc/zte/pm_domains.c b/drivers/soc/zte/pm_domains.c new file mode 100644 index 0000000..e4d1235 --- /dev/null +++ b/drivers/soc/zte/pm_domains.c @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2015 ZTE Ltd. + * + * Author: Baoyou Xie <baoyou.xie@linaro.org> + * License terms: GNU General Public License (GPL) version 2 + */ +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include "pm_domains.h" + +#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN]) +#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN]) +#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN]) +#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN]) +#define PCU_DM_PWRDN(zpd) ((zpd)->reg_offset[REG_PWRDN]) +#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC]) + +static void __iomem *pcubase; + +int zx_normal_power_on(struct generic_pm_domain *domain) +{ + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; + unsigned long loop = 1000; + u32 val; + + if (zpd->polarity == PWREN) { + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); + val |= BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); + } else { + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); + } + + do { + udelay(1); + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) + & BIT(zpd->bit); + } while (--loop && !val); + + if (!loop) { + pr_err("Error: %s %s fail\n", __func__, domain->name); + return -EIO; + } + + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_RSTEN(zpd)); + udelay(5); + + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd)); + udelay(5); + + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_CLKEN(zpd)); + udelay(5); + + pr_info("normal poweron %s\n", domain->name); + + return 0; +} + +int zx_normal_power_off(struct generic_pm_domain *domain) +{ + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; + unsigned long loop = 1000; + u32 val; + + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd)); + udelay(5); + + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_ISOEN(zpd)); + udelay(5); + + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd)); + udelay(5); + + if (zpd->polarity == PWREN) { + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd)); + val &= ~BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd)); + } else { + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd)); + val |= BIT(zpd->bit); + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd)); + } + + do { + udelay(1); + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd)) + & BIT(zpd->bit); + } while (--loop && val); + + if (!loop) { + pr_err("Error: %s %s fail\n", __func__, domain->name); + return -EIO; + } + + pr_info("normal poweroff %s\n", domain->name); + + return 0; +} + +int +zx_pd_probe(struct platform_device *pdev, + struct generic_pm_domain **zx_pm_domains, + int domain_num) +{ + struct genpd_onecell_data *genpd_data; + struct resource *res; + int i; + + genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); + if (!genpd_data) + return -ENOMEM; + + genpd_data->domains = zx_pm_domains; + genpd_data->num_domains = domain_num; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined\n"); + return -ENODEV; + } + + pcubase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pcubase)) { + dev_err(&pdev->dev, "ioremap fail.\n"); + return -EIO; + } + + for (i = 0; i < domain_num; ++i) + pm_genpd_init(zx_pm_domains[i], NULL, false); + + of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); + dev_info(&pdev->dev, "powerdomain init ok\n"); + return 0; +} diff --git a/drivers/soc/zte/pm_domains.h b/drivers/soc/zte/pm_domains.h new file mode 100644 index 0000000..d3a52fd --- /dev/null +++ b/drivers/soc/zte/pm_domains.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2015 ZTE Co., Ltd. + * http://www.zte.com.cn + * + * Header for ZTE's Power Domain Driver support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ZTE_PM_DOMAIN_H +#define __ZTE_PM_DOMAIN_H + +#include <linux/platform_device.h> +#include <linux/pm_domain.h> + +enum { + REG_CLKEN, + REG_ISOEN, + REG_RSTEN, + REG_PWREN, + REG_PWRDN, + REG_ACK_SYNC, + + /* The size of the array - must be last */ + REG_ARRAY_SIZE, +}; + +enum zx_power_polarity { + PWREN, + PWRDN, +}; + +struct zx_pm_domain { + struct generic_pm_domain dm; + const u16 bit; + const enum zx_power_polarity polarity; + const u16 *reg_offset; +}; + +extern int zx_normal_power_on(struct generic_pm_domain *domain); +extern int zx_normal_power_off(struct generic_pm_domain *domain); +extern int +zx_pd_probe(struct platform_device *pdev, + struct generic_pm_domain **zx_pm_domains, + int domain_num); +#endif /* __ZTE_PM_DOMAIN_H */
The ARMv8 2967 family (296718, 296716 etc) uses different value for controlling the power domain on/off registers, Choose the value depending on the compatible. Multiple domains are prepared for the family, this patch prepares the common functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> --- drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/zte/Kconfig | 13 ++++ drivers/soc/zte/Makefile | 4 ++ drivers/soc/zte/pm_domains.c | 150 +++++++++++++++++++++++++++++++++++++++++++ drivers/soc/zte/pm_domains.h | 48 ++++++++++++++ 6 files changed, 217 insertions(+) create mode 100644 drivers/soc/zte/Kconfig create mode 100644 drivers/soc/zte/Makefile create mode 100644 drivers/soc/zte/pm_domains.c create mode 100644 drivers/soc/zte/pm_domains.h -- 2.7.4