| Message ID | 20170404120819.6921-3-linus.walleij@linaro.org |
|---|---|
| State | Accepted |
| Commit | 63c3ecd946d4ae2879ec0d8c6dcb90132a74d831 |
| Headers | show |
| Series | None | expand |
On 04/04/17 13:08, Linus Walleij wrote: > The Qualcomm PM8xxx PMICs contain a simpler ADC than its > successors (already in the kernel as qcom-spmi-vadc.c): > the HK/XO ADC (Housekeeping/Chrystal oscillator ADC). > > As far as I can understand this is equal to the PMICs > using SSBI transport and encompass PM8018, PM8038, > PM8058, and PM8921, so this is shortly named PM8xxx. > > This ADC monitors a bunch of on-board voltages and the die > temperature of the PMIC itself, but it can also be routed > to convert a few external MPPs (multi-purpose pins). On > the APQ8060 DragonBoard this feature is used to let this > ADC convert an analog ALS (Ambient Light Sensor) voltage > signal from a Capella CM3605 ALS into a LUX value. > > Developed and tested with APQ8060 DragonBoard based on > Ivan's driver and Rama Krishna's patches. The SPMI VADC > driver is quite different, but share enough minor > functionality that I have split out to the common file > in a previous patch. > > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-arm-msm@vger.kernel.org > Cc: Ivan T. Ivanov <iivanov.xz@gmail.com> > Cc: Andy Gross <andy.gross@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Cc: Rama Krishna Phani A <rphani@codeaurora.org> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Applied and pushed out as testing for the autobuilders to spot if we have missed anything! If you have time, it would be great to make these build with COMPILE_TEST to get some better build coverage in general.. I bodged it in for the MFD and it works but there may be other hidden dependencies. Thanks, Jonathan > --- > ChangeLog v4->v5: > - Fix the kbuild for allmod and allyes as described earlier. > - Add a per-variant information container instead of just adding > a list of channels to the match data. Use this variant > information throughout the code to support the variations. > - Incorporate new information from Björn and Stephen about how the > channels actually work on the different variants. PM8058 has 16 > channels that can be muxed to different sources, so an AMUX > setting each. The PM8921 is more complex because it has a premux > instead of a prescaler. > - To deal with the premux addressing scheme we turn all channel > specifiers into twocell, where the first cell is prescaler or > premux and the second one is the analog mux. > - Rebase on build fixes. > ChangeLog v3->v4: > - Only reposting this patch as the DT bindings and refactorings > are merged. > - Prefix all channel names with PM8XXX_* to avoid namespace clashes. > - Use the compatible string to name the IIO device for greater > model precision. > - Fix up a few excess newlines. > ChangeLog v2->v3: > - Rebase using Rama Krishna's improvements, set up defaults for > scaling function and prescaler for each channel, per ASIC variant. > - Also set up RSV per-variant as the vendor tree does this and > it seems necessary to set RSV0 on the muxoff channel to get > readings from the XO thermistor. > - Encode default IIO type in the default per-PMIC channel table. > - Fixed a bug in ratiometric calibration (needed to force ratiometric > mode). > - Dropped PM8917: that doesn't have any XOADC. > - Added a special flag for the PM8058: it apparently needs special > RSV muxing due to being necessarily different. > - Augmented to handle altered ratiometric DT property. > - Do not hardcode that the reference voltage must be 2.2V, just fetch > and enable the regulator. Different PMICs use different reference > voltages. > ChangeLog v1->v2: > - Introduce a mutex to avoid different clients stepping on each others' > toes > - Add an of_xlate function to be sure to match the right ADC > - Add all compatible strings, not just PM8058 > --- > drivers/iio/adc/Kconfig | 11 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/qcom-pm8xxx-xoadc.c | 1036 +++++++++++++++++++++++++++++++++++ > 3 files changed, 1048 insertions(+) > create mode 100644 drivers/iio/adc/qcom-pm8xxx-xoadc.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 8720e1c706fe..24c97add7f2f 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -445,6 +445,17 @@ config PALMAS_GPADC > config QCOM_VADC_COMMON > tristate > > +config QCOM_PM8XXX_XOADC > + tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" > + depends on MFD_PM8XXX > + select QCOM_VADC_COMMON > + help > + ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs > + using SSBI transport: PM8018, PM8038, PM8058, PM8921. > + > + To compile this driver as a module, choose M here: the module > + will be called qcom-pm8xxx-xoadc. > + > config QCOM_SPMI_IADC > tristate "Qualcomm SPMI PMIC current ADC" > depends on SPMI > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index 8c2e294042ae..0394bc740bdc 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -45,6 +45,7 @@ obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o > obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o > obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o > obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o > +obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o > obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o > obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o > obj-$(CONFIG_STX104) += stx104.o > diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c > new file mode 100644 > index 000000000000..cea8f1fb444a > --- /dev/null > +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c > @@ -0,0 +1,1036 @@ > +/* > + * Qualcomm PM8xxx PMIC XOADC driver > + * > + * These ADCs are known as HK/XO (house keeping / chrystal oscillator) > + * "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of > + * specific-purpose and general purpose ADC converters and channels. > + * > + * Copyright (C) 2017 Linaro Ltd. > + * Author: Linus Walleij <linus.walleij@linaro.org> > + */ > + > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/init.h> > +#include <linux/interrupt.h> > +#include <linux/regulator/consumer.h> > + > +#include "qcom-vadc-common.h" > + > +/* > + * Definitions for the "user processor" registers lifted from the v3.4 > + * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: > + * drivers/misc/pmic8058-xoadc.c > + * drivers/hwmon/pm8xxx-adc.c > + * None of them contain any complete register specification, so this is > + * a best effort of combining the information. > + */ > + > +/* These appear to be "battery monitor" registers */ > +#define ADC_ARB_BTM_CNTRL1 0x17e > +#define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0) > +#define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1) > +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2) > +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3) > +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4) > +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5) > +#define ADC_ARB_BTM_CNTRL1_EOC BIT(6) > +#define ADC_ARB_BTM_CNTRL1_REQ BIT(7) > + > +#define ADC_ARB_BTM_AMUX_CNTRL 0x17f > +#define ADC_ARB_BTM_ANA_PARAM 0x180 > +#define ADC_ARB_BTM_DIG_PARAM 0x181 > +#define ADC_ARB_BTM_RSV 0x182 > +#define ADC_ARB_BTM_DATA1 0x183 > +#define ADC_ARB_BTM_DATA0 0x184 > +#define ADC_ARB_BTM_BAT_COOL_THR1 0x185 > +#define ADC_ARB_BTM_BAT_COOL_THR0 0x186 > +#define ADC_ARB_BTM_BAT_WARM_THR1 0x187 > +#define ADC_ARB_BTM_BAT_WARM_THR0 0x188 > +#define ADC_ARB_BTM_CNTRL2 0x18c > + > +/* Proper ADC registers */ > + > +#define ADC_ARB_USRP_CNTRL 0x197 > +#define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0) > +#define ADC_ARB_USRP_CNTRL_RSV1 BIT(1) > +#define ADC_ARB_USRP_CNTRL_RSV2 BIT(2) > +#define ADC_ARB_USRP_CNTRL_RSV3 BIT(3) > +#define ADC_ARB_USRP_CNTRL_RSV4 BIT(4) > +#define ADC_ARB_USRP_CNTRL_RSV5 BIT(5) > +#define ADC_ARB_USRP_CNTRL_EOC BIT(6) > +#define ADC_ARB_USRP_CNTRL_REQ BIT(7) > + > +#define ADC_ARB_USRP_AMUX_CNTRL 0x198 > +/* > + * The channel mask includes the bits selecting channel mux and prescaler > + * on PM8058, or channel mux and premux on PM8921. > + */ > +#define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc > +#define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0) > +#define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1) > +/* On PM8058 this is prescaling, on PM8921 this is premux */ > +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2) > +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3) > +#define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4) > +#define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5) > +#define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6) > +#define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7) > +#define ADC_AMUX_PREMUX_SHIFT 2 > +#define ADC_AMUX_SEL_SHIFT 4 > + > +/* We know very little about the bits in this register */ > +#define ADC_ARB_USRP_ANA_PARAM 0x199 > +#define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE > +#define ADC_ARB_USRP_ANA_PARAM_EN 0xFF > + > +#define ADC_ARB_USRP_DIG_PARAM 0x19A > +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0) > +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1) > +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2) > +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3) > +#define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4) > +/* > + * On a later ADC the decimation factors are defined as > + * 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this > + * holds also for this older XOADC. > + */ > +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5) > +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6) > +#define ADC_ARB_USRP_DIG_PARAM_EN BIT(7) > +#define ADC_DIG_PARAM_DEC_SHIFT 5 > + > +#define ADC_ARB_USRP_RSV 0x19B > +#define ADC_ARB_USRP_RSV_RST BIT(0) > +#define ADC_ARB_USRP_RSV_DTEST0 BIT(1) > +#define ADC_ARB_USRP_RSV_DTEST1 BIT(2) > +#define ADC_ARB_USRP_RSV_OP BIT(3) > +#define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4) > +#define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5) > +#define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6) > +#define ADC_ARB_USRP_RSV_TRM BIT(7) > +#define ADC_RSV_IP_SEL_SHIFT 4 > + > +#define ADC_ARB_USRP_DATA0 0x19D > +#define ADC_ARB_USRP_DATA1 0x19C > + > +/** > + * Physical channels which MUST exist on all PM variants in order to provide > + * proper reference points for calibration. > + * > + * @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel > + * @PM8XXX_CHANNEL_125V: 1250mV reference channel > + * @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel > + * @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also > + * measures XO temperature > + */ > +#define PM8XXX_CHANNEL_INTERNAL 0x0c > +#define PM8XXX_CHANNEL_125V 0x0d > +#define PM8XXX_CHANNEL_INTERNAL_2 0x0e > +#define PM8XXX_CHANNEL_MUXOFF 0x0f > + > +/* > + * PM8058 AMUX premux scaling, two bits. This is done of the channel before > + * reaching the AMUX. > + */ > +#define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */ > +#define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */ > +#define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */ > + > +/* Defines reference voltage for the XOADC */ > +#define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */ > +#define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */ > +#define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */ > +#define AMUX_RSV3 0x3 /* not used */ > +#define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */ > +#define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */ > +#define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */ > + > +/** > + * struct xoadc_channel - encodes channel properties and defaults > + * @datasheet_name: the hardwarename of this channel > + * @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting > + * this channel. Both this and the amux channel is needed to uniquely > + * identify a channel. Values 0..3. > + * @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this > + * channel, bits 4..7, selects the amux, values 0..f > + * @prescale: the channels have hard-coded prescale ratios defined > + * by the hardware, this tells us what it is > + * @type: corresponding IIO channel type, usually IIO_VOLTAGE or > + * IIO_TEMP > + * @scale_fn_type: the liner interpolation etc to convert the > + * ADC code to the value that IIO expects, in uV or millicelsius > + * etc. This scale function can be pretty elaborate if different > + * thermistors are connected or other hardware characteristics are > + * deployed. > + * @amux_ip_rsv: ratiometric scale value used by the analog muxer: this > + * selects the reference voltage for ratiometric scaling > + */ > +struct xoadc_channel { > + const char *datasheet_name; > + u8 pre_scale_mux:2; > + u8 amux_channel:4; > + const struct vadc_prescale_ratio prescale; > + enum iio_chan_type type; > + enum vadc_scale_fn_type scale_fn_type; > + u8 amux_ip_rsv:3; > +}; > + > +/** > + * struct xoadc_variant - encodes the XOADC variant characteristics > + * @name: name of this PMIC variant > + * @channels: the hardware channels and respective settings and defaults > + * @broken_ratiometric: if the PMIC has broken ratiometric scaling (this > + * is a known problem on PM8058) > + * @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058) > + * @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level > + * mux > + */ > +struct xoadc_variant { > + const char name[16]; > + const struct xoadc_channel *channels; > + bool broken_ratiometric; > + bool prescaling; > + bool second_level_mux; > +}; > + > +/* > + * XOADC_CHAN macro parameters: > + * _dname: the name of the channel > + * _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel > + * _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register > + * for this channel. On some PMICs some of the bits select a prescaler, and > + * on some PMICs some of the bits select various complex multiplex settings. > + * _type: IIO channel type > + * _prenum: prescaler numerator (dividend) > + * _preden: prescaler denominator (divisor) > + * _scale: scaling function type, this selects how the raw valued is mangled > + * to output the actual processed measurement > + * _amip: analog mux input parent when using ratiometric measurements > + */ > +#define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \ > + { \ > + .datasheet_name = __stringify(_dname), \ > + .pre_scale_mux = _presmux, \ > + .amux_channel = _amux, \ > + .prescale = { .num = _prenum, .den = _preden }, \ > + .type = _type, \ > + .scale_fn_type = _scale, \ > + .amux_ip_rsv = _amip, \ > + } > + > +/* > + * Taken from arch/arm/mach-msm/board-9615.c in the vendor tree: > + * TODO: incomplete, needs testing. > + */ > +static const struct xoadc_channel pm8018_xoadc_channels[] = { > + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), > + /* Used for battery ID or battery temperature */ > + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2), > + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), > + { }, /* Sentinel */ > +}; > + > +/* > + * Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree: > + * TODO: needs testing. > + */ > +static const struct xoadc_channel pm8038_xoadc_channels[] = { > + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* AMUX8 used for battery temperature in most cases */ > + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2), > + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), > + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), > + { }, /* Sentinel */ > +}; > + > +/* > + * This was created by cross-referencing the vendor tree > + * arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[] > + * with the "channel types" (first field) to find the right > + * configuration for these channels on an MSM8x60 i.e. PM8058 > + * setup. > + */ > +static const struct xoadc_channel pm8058_xoadc_channels[] = { > + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + /* > + * AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in > + * some code and documentation. But they are really just 5 > + * channels just like any other. They are connected to a switching > + * matrix where they can be routed to any of the MPPs, not just > + * 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is > + * very confusing. > + */ > + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), > + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), > + /* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */ > + { }, /* Sentinel */ > +}; > + > +/* > + * The PM8921 has some pre-muxing on its channels, this comes from the vendor tree > + * include/linux/mfd/pm8xxx/pm8xxx-adc.h > + * board-flo-pmic.c (Nexus 7) and board-8064-pmic.c > + */ > +static const struct xoadc_channel pm8921_xoadc_channels[] = { > + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), > + /* channel "ICHG" is reserved and not used on PM8921 */ > + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */ > + XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1), > + XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), > + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* FIXME: look into the scaling of this temperature */ > + XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), > + /* The following channels have premux bit 0 set to 1 (all end in 4) */ > + XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* Set scaling to 1/2 based on the name for these two */ > + XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* Internal test signals, I think */ > + XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), > + /* The following channels have premux bit 1 set to 1 (all end in 8) */ > + /* I guess even ATEST8 will be divided by 3 here */ > + XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + /* I guess div 2 div 3 becomes div 6 */ > + XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), > + { }, /* Sentinel */ > +}; > + > +/** > + * struct pm8xxx_chan_info - ADC channel information > + * @name: name of this channel > + * @hwchan: pointer to hardware channel information (muxing & scaling settings) > + * @calibration: whether to use absolute or ratiometric calibration > + * @scale_fn_type: scaling function type > + * @decimation: 0,1,2,3 > + * @amux_ip_rsv: ratiometric scale value if using ratiometric > + * calibration: 0, 1, 2, 4, 5. > + */ > +struct pm8xxx_chan_info { > + const char *name; > + const struct xoadc_channel *hwchan; > + enum vadc_calibration calibration; > + u8 decimation:2; > + u8 amux_ip_rsv:3; > +}; > + > +/** > + * struct pm8xxx_xoadc - state container for the XOADC > + * @dev: pointer to device > + * @map: regmap to access registers > + * @vref: reference voltage regulator > + * characteristics of the channels, and sensible default settings > + * @nchans: number of channels, configured by the device tree > + * @chans: the channel information per-channel, configured by the device tree > + * @iio_chans: IIO channel specifiers > + * @graph: linear calibration parameters for absolute and > + * ratiometric measurements > + * @complete: completion to indicate end of conversion > + * @lock: lock to restrict access to the hardware to one client at the time > + */ > +struct pm8xxx_xoadc { > + struct device *dev; > + struct regmap *map; > + const struct xoadc_variant *variant; > + struct regulator *vref; > + unsigned int nchans; > + struct pm8xxx_chan_info *chans; > + struct iio_chan_spec *iio_chans; > + struct vadc_linear_graph graph[2]; > + struct completion complete; > + struct mutex lock; > +}; > + > +static irqreturn_t pm8xxx_eoc_irq(int irq, void *d) > +{ > + struct iio_dev *indio_dev = d; > + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); > + > + complete(&adc->complete); > + > + return IRQ_HANDLED; > +} > + > +static struct pm8xxx_chan_info * > +pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan) > +{ > + struct pm8xxx_chan_info *ch; > + int i; > + > + for (i = 0; i < adc->nchans; i++) { > + ch = &adc->chans[i]; > + if (ch->hwchan->amux_channel == chan) > + break; > + } > + if (i == adc->nchans) > + return NULL; > + > + return ch; > +} > + > +static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc, > + const struct pm8xxx_chan_info *ch, > + u8 rsv, u16 *adc_code, > + bool force_ratiometric) > +{ > + int ret; > + unsigned int val; > + u8 rsvmask, rsvval; > + u8 lsb, msb; > + > + dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n", > + ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv); > + > + mutex_lock(&adc->lock); > + > + /* Mux in this channel */ > + val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT; > + val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT; > + ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val); > + if (ret) > + goto unlock; > + > + /* Set up ratiometric scale value, mask off all bits except these */ > + rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 | > + ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP); > + if (adc->variant->broken_ratiometric && !force_ratiometric) { > + /* > + * Apparently the PM8058 has some kind of bug which is > + * reflected in the vendor tree drivers/misc/pmix8058-xoadc.c > + * which just hardcodes the RSV selector to SEL1 (0x20) for > + * most cases and SEL0 (0x10) for the MUXOFF channel only. > + * If we force ratiometric (currently only done when attempting > + * to do ratiometric calibration) this doesn't seem to work > + * very well and I suspect ratiometric conversion is simply > + * broken or not supported on the PM8058. > + * > + * Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select > + * the mode alone. > + * > + * Some PM8058 register documentation would be nice to get > + * this right. > + */ > + if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF) > + rsvval = ADC_ARB_USRP_RSV_IP_SEL0; > + else > + rsvval = ADC_ARB_USRP_RSV_IP_SEL1; > + } else { > + if (rsv == 0xff) > + rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) | > + ADC_ARB_USRP_RSV_TRM; > + else > + rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) | > + ADC_ARB_USRP_RSV_TRM; > + } > + > + ret = regmap_update_bits(adc->map, > + ADC_ARB_USRP_RSV, > + ~rsvmask, > + rsvval); > + if (ret) > + goto unlock; > + > + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, > + ADC_ARB_USRP_ANA_PARAM_DIS); > + if (ret) > + goto unlock; > + > + /* Decimation factor */ > + ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM, > + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 | > + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 | > + ch->decimation << ADC_DIG_PARAM_DEC_SHIFT); > + if (ret) > + goto unlock; > + > + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, > + ADC_ARB_USRP_ANA_PARAM_EN); > + if (ret) > + goto unlock; > + > + /* Enable the arbiter, the Qualcomm code does it twice like this */ > + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, > + ADC_ARB_USRP_CNTRL_EN_ARB); > + if (ret) > + goto unlock; > + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, > + ADC_ARB_USRP_CNTRL_EN_ARB); > + if (ret) > + goto unlock; > + > + > + /* Fire a request! */ > + reinit_completion(&adc->complete); > + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, > + ADC_ARB_USRP_CNTRL_EN_ARB | > + ADC_ARB_USRP_CNTRL_REQ); > + if (ret) > + goto unlock; > + > + /* Next the interrupt occurs */ > + ret = wait_for_completion_timeout(&adc->complete, > + VADC_CONV_TIME_MAX_US); > + if (!ret) { > + dev_err(adc->dev, "conversion timed out\n"); > + ret = -ETIMEDOUT; > + goto unlock; > + } > + > + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val); > + if (ret) > + goto unlock; > + lsb = val; > + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val); > + if (ret) > + goto unlock; > + msb = val; > + *adc_code = (msb << 8) | lsb; > + > + /* Turn off the ADC by setting the arbiter to 0 twice */ > + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); > + if (ret) > + goto unlock; > + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); > + if (ret) > + goto unlock; > + > +unlock: > + mutex_unlock(&adc->lock); > + return ret; > +} > + > +static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc, > + const struct pm8xxx_chan_info *ch, > + u16 *adc_code) > +{ > + /* > + * Normally we just use the ratiometric scale value (RSV) predefined > + * for the channel, but during calibration we need to modify this > + * so this wrapper is a helper hiding the more complex version. > + */ > + return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false); > +} > + > +static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc) > +{ > + const struct pm8xxx_chan_info *ch; > + u16 read_1250v; > + u16 read_0625v; > + u16 read_nomux_rsv5; > + u16 read_nomux_rsv4; > + int ret; > + > + adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV; > + adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE; > + > + /* Common reference channel calibration */ > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); > + if (!ch) > + return -ENODEV; > + ret = pm8xxx_read_channel(adc, ch, &read_1250v); > + if (ret) { > + dev_err(adc->dev, "could not read 1.25V reference channel\n"); > + return -ENODEV; > + } > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); > + if (!ch) > + return -ENODEV; > + ret = pm8xxx_read_channel(adc, ch, &read_0625v); > + if (ret) { > + dev_err(adc->dev, "could not read 0.625V reference channel\n"); > + return -ENODEV; > + } > + if (read_1250v == read_0625v) { > + dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n"); > + return -ENODEV; > + } > + > + adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v; > + adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v; > + > + dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n", > + VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy); > + > + /* Ratiometric calibration */ > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); > + if (!ch) > + return -ENODEV; > + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5, > + &read_nomux_rsv5, true); > + if (ret) { > + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); > + return -ENODEV; > + } > + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4, > + &read_nomux_rsv4, true); > + if (ret) { > + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); > + return -ENODEV; > + } > + adc->graph[VADC_CALIB_RATIOMETRIC].dy = > + read_nomux_rsv5 - read_nomux_rsv4; > + adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4; > + > + dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n", > + VADC_RATIOMETRIC_RANGE, > + adc->graph[VADC_CALIB_RATIOMETRIC].dy); > + > + return 0; > +} > + > +static int pm8xxx_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); > + const struct pm8xxx_chan_info *ch; > + u16 adc_code; > + int ret; > + > + switch (mask) { > + case IIO_CHAN_INFO_PROCESSED: > + ch = pm8xxx_get_channel(adc, chan->address); > + if (!ch) { > + dev_err(adc->dev, "no such channel %lu\n", > + chan->address); > + return -EINVAL; > + } > + ret = pm8xxx_read_channel(adc, ch, &adc_code); > + if (ret) > + return ret; > + > + ret = qcom_vadc_scale(ch->hwchan->scale_fn_type, > + &adc->graph[ch->calibration], > + &ch->hwchan->prescale, > + (ch->calibration == VADC_CALIB_ABSOLUTE), > + adc_code, val); > + if (ret) > + return ret; > + > + return IIO_VAL_INT; > + case IIO_CHAN_INFO_RAW: > + ch = pm8xxx_get_channel(adc, chan->address); > + if (!ch) { > + dev_err(adc->dev, "no such channel %lu\n", > + chan->address); > + return -EINVAL; > + } > + ret = pm8xxx_read_channel(adc, ch, &adc_code); > + if (ret) > + return ret; > + > + *val = (int)adc_code; > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > +} > + > +static int pm8xxx_of_xlate(struct iio_dev *indio_dev, > + const struct of_phandle_args *iiospec) > +{ > + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); > + u8 pre_scale_mux; > + u8 amux_channel; > + unsigned int i; > + > + /* > + * First cell is prescaler or premux, second cell is analog > + * mux. > + */ > + if (iiospec->args_count != 2) { > + dev_err(&indio_dev->dev, "wrong number of arguments for %s need 2 got %d\n", > + iiospec->np->name, > + iiospec->args_count); > + return -EINVAL; > + } > + pre_scale_mux = (u8)iiospec->args[0]; > + amux_channel = (u8)iiospec->args[1]; > + dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n", > + pre_scale_mux, amux_channel); > + > + /* We need to match exactly on the prescale/premux and channel */ > + for (i = 0; i < adc->nchans; i++) > + if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux && > + adc->chans[i].hwchan->amux_channel == amux_channel) > + return i; > + > + return -EINVAL; > +} > + > +static const struct iio_info pm8xxx_xoadc_info = { > + .driver_module = THIS_MODULE, > + .of_xlate = pm8xxx_of_xlate, > + .read_raw = pm8xxx_read_raw, > +}; > + > +static int pm8xxx_xoadc_parse_channel(struct device *dev, > + struct device_node *np, > + const struct xoadc_channel *hw_channels, > + struct iio_chan_spec *iio_chan, > + struct pm8xxx_chan_info *ch) > +{ > + const char *name = np->name; > + const struct xoadc_channel *hwchan; > + u32 pre_scale_mux, amux_channel; > + u32 rsv, dec; > + int ret; > + int chid; > + > + ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux); > + if (ret) { > + dev_err(dev, "invalid pre scale/mux number %s\n", name); > + return ret; > + } > + ret = of_property_read_u32_index(np, "reg", 1, &amux_channel); > + if (ret) { > + dev_err(dev, "invalid amux channel number %s\n", name); > + return ret; > + } > + > + /* Find the right channel setting */ > + chid = 0; > + hwchan = &hw_channels[0]; > + while (hwchan && hwchan->datasheet_name) { > + if (hwchan->pre_scale_mux == pre_scale_mux && > + hwchan->amux_channel == amux_channel) > + break; > + hwchan++; > + chid++; > + } > + /* The sentinel does not have a name assigned */ > + if (!hwchan->datasheet_name) { > + dev_err(dev, "could not locate channel %02x/%02x\n", > + pre_scale_mux, amux_channel); > + return -EINVAL; > + } > + ch->name = name; > + ch->hwchan = hwchan; > + /* Everyone seems to use absolute calibration except in special cases */ > + ch->calibration = VADC_CALIB_ABSOLUTE; > + /* Everyone seems to use default ("type 2") decimation */ > + ch->decimation = VADC_DEF_DECIMATION; > + > + if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) { > + ch->calibration = VADC_CALIB_RATIOMETRIC; > + if (rsv > XOADC_RSV_MAX) { > + dev_err(dev, "%s too large RSV value %d\n", name, rsv); > + return -EINVAL; > + } > + if (rsv == AMUX_RSV3) { > + dev_err(dev, "%s invalid RSV value %d\n", name, rsv); > + return -EINVAL; > + } > + } > + > + /* Optional decimation, if omitted we use the default */ > + ret = of_property_read_u32(np, "qcom,decimation", &dec); > + if (!ret) { > + ret = qcom_vadc_decimation_from_dt(dec); > + if (ret < 0) { > + dev_err(dev, "%s invalid decimation %d\n", > + name, dec); > + return ret; > + } > + ch->decimation = ret; > + } > + > + iio_chan->channel = chid; > + iio_chan->address = hwchan->amux_channel; > + iio_chan->datasheet_name = hwchan->datasheet_name; > + iio_chan->type = hwchan->type; > + /* All channels are raw or processed */ > + iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_PROCESSED); > + iio_chan->indexed = 1; > + > + dev_dbg(dev, "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" " > + "ref voltage: %d, decimation %d " > + "prescale %d/%d, scale function %d\n", > + hwchan->pre_scale_mux, hwchan->amux_channel, ch->name, > + ch->amux_ip_rsv, ch->decimation, hwchan->prescale.num, > + hwchan->prescale.den, hwchan->scale_fn_type); > + > + return 0; > +} > + > +static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, > + struct device_node *np) > +{ > + struct device_node *child; > + struct pm8xxx_chan_info *ch; > + int ret; > + int i; > + > + adc->nchans = of_get_available_child_count(np); > + if (!adc->nchans) { > + dev_err(adc->dev, "no channel children\n"); > + return -ENODEV; > + } > + dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans); > + > + adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans, > + sizeof(*adc->iio_chans), GFP_KERNEL); > + if (!adc->iio_chans) > + return -ENOMEM; > + > + adc->chans = devm_kcalloc(adc->dev, adc->nchans, > + sizeof(*adc->chans), GFP_KERNEL); > + if (!adc->chans) > + return -ENOMEM; > + > + i = 0; > + for_each_available_child_of_node(np, child) { > + ch = &adc->chans[i]; > + ret = pm8xxx_xoadc_parse_channel(adc->dev, child, > + adc->variant->channels, > + &adc->iio_chans[i], > + ch); > + if (ret) { > + of_node_put(child); > + return ret; > + } > + i++; > + } > + > + /* Check for required channels */ > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); > + if (!ch) { > + dev_err(adc->dev, "missing 1.25V reference channel\n"); > + return -ENODEV; > + } > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); > + if (!ch) { > + dev_err(adc->dev, "missing 0.625V reference channel\n"); > + return -ENODEV; > + } > + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); > + if (!ch) { > + dev_err(adc->dev, "missing MUXOFF reference channel\n"); > + return -ENODEV; > + } > + > + return 0; > +} > + > +static int pm8xxx_xoadc_probe(struct platform_device *pdev) > +{ > + const struct xoadc_variant *variant; > + struct pm8xxx_xoadc *adc; > + struct iio_dev *indio_dev; > + struct device_node *np = pdev->dev.of_node; > + struct regmap *map; > + struct device *dev = &pdev->dev; > + int ret; > + > + variant = of_device_get_match_data(dev); > + if (!variant) > + return -ENODEV; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); > + if (!indio_dev) > + return -ENOMEM; > + platform_set_drvdata(pdev, indio_dev); > + > + adc = iio_priv(indio_dev); > + adc->dev = dev; > + adc->variant = variant; > + init_completion(&adc->complete); > + mutex_init(&adc->lock); > + > + ret = pm8xxx_xoadc_parse_channels(adc, np); > + if (ret) > + return ret; > + > + map = dev_get_regmap(dev->parent, NULL); > + if (!map) { > + dev_err(dev, "parent regmap unavailable.\n"); > + return -ENXIO; > + } > + adc->map = map; > + > + /* Bring up regulator */ > + adc->vref = devm_regulator_get(dev, "xoadc-ref"); > + if (IS_ERR(adc->vref)) { > + dev_err(dev, "failed to get XOADC VREF regulator\n"); > + return PTR_ERR(adc->vref); > + } > + ret = regulator_enable(adc->vref); > + if (ret) { > + dev_err(dev, "failed to enable XOADC VREF regulator\n"); > + return ret; > + } > + > + ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0), > + pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev); > + if (ret) { > + dev_err(dev, "unable to request IRQ\n"); > + goto out_disable_vref; > + } > + > + indio_dev->dev.parent = dev; > + indio_dev->dev.of_node = np; > + indio_dev->name = variant->name; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &pm8xxx_xoadc_info; > + indio_dev->channels = adc->iio_chans; > + indio_dev->num_channels = adc->nchans; > + > + ret = iio_device_register(indio_dev); > + if (ret) > + goto out_disable_vref; > + > + ret = pm8xxx_calibrate_device(adc); > + if (ret) > + goto out_unreg_device; > + > + dev_info(dev, "%s XOADC driver enabled\n", variant->name); > + > + return 0; > + > +out_unreg_device: > + iio_device_unregister(indio_dev); > +out_disable_vref: > + regulator_disable(adc->vref); > + > + return ret; > +} > + > +static int pm8xxx_xoadc_remove(struct platform_device *pdev) > +{ > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + > + regulator_disable(adc->vref); > + > + return 0; > +} > + > +static const struct xoadc_variant pm8018_variant = { > + .name = "PM8018-XOADC", > + .channels = pm8018_xoadc_channels, > +}; > + > +static const struct xoadc_variant pm8038_variant = { > + .name = "PM8038-XOADC", > + .channels = pm8038_xoadc_channels, > +}; > + > +static const struct xoadc_variant pm8058_variant = { > + .name = "PM8058-XOADC", > + .channels = pm8058_xoadc_channels, > + .broken_ratiometric = true, > + .prescaling = true, > +}; > + > +static const struct xoadc_variant pm8921_variant = { > + .name = "PM8921-XOADC", > + .channels = pm8921_xoadc_channels, > + .second_level_mux = true, > +}; > + > +static const struct of_device_id pm8xxx_xoadc_id_table[] = { > + { > + .compatible = "qcom,pm8018-adc", > + .data = &pm8018_variant, > + }, > + { > + .compatible = "qcom,pm8038-adc", > + .data = &pm8038_variant, > + }, > + { > + .compatible = "qcom,pm8058-adc", > + .data = &pm8058_variant, > + }, > + { > + .compatible = "qcom,pm8921-adc", > + .data = &pm8921_variant, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table); > + > +static struct platform_driver pm8xxx_xoadc_driver = { > + .driver = { > + .name = "pm8xxx-adc", > + .of_match_table = pm8xxx_xoadc_id_table, > + }, > + .probe = pm8xxx_xoadc_probe, > + .remove = pm8xxx_xoadc_remove, > +}; > +module_platform_driver(pm8xxx_xoadc_driver); > + > +MODULE_DESCRIPTION("PM8xxx XOADC driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:pm8xxx-xoadc"); > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Apr 8, 2017 at 6:47 PM, Jonathan Cameron <jic23@kernel.org> wrote: > If you have time, it would be great to make these build > with COMPILE_TEST to get some better build coverage in general.. > I bodged it in for the MFD and it works but there may be other > hidden dependencies. That's what I did too. I'll make a proper patch and send to Lee and see what happens in the autobuilders if we do that. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 8720e1c706fe..24c97add7f2f 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -445,6 +445,17 @@ config PALMAS_GPADC config QCOM_VADC_COMMON tristate +config QCOM_PM8XXX_XOADC + tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" + depends on MFD_PM8XXX + select QCOM_VADC_COMMON + help + ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs + using SSBI transport: PM8018, PM8038, PM8058, PM8921. + + To compile this driver as a module, choose M here: the module + will be called qcom-pm8xxx-xoadc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 8c2e294042ae..0394bc740bdc 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o +obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_STX104) += stx104.o diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c new file mode 100644 index 000000000000..cea8f1fb444a --- /dev/null +++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c @@ -0,0 +1,1036 @@ +/* + * Qualcomm PM8xxx PMIC XOADC driver + * + * These ADCs are known as HK/XO (house keeping / chrystal oscillator) + * "XO" in "XOADC" means Chrystal Oscillator. It's a bunch of + * specific-purpose and general purpose ADC converters and channels. + * + * Copyright (C) 2017 Linaro Ltd. + * Author: Linus Walleij <linus.walleij@linaro.org> + */ + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/regulator/consumer.h> + +#include "qcom-vadc-common.h" + +/* + * Definitions for the "user processor" registers lifted from the v3.4 + * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: + * drivers/misc/pmic8058-xoadc.c + * drivers/hwmon/pm8xxx-adc.c + * None of them contain any complete register specification, so this is + * a best effort of combining the information. + */ + +/* These appear to be "battery monitor" registers */ +#define ADC_ARB_BTM_CNTRL1 0x17e +#define ADC_ARB_BTM_CNTRL1_EN_BTM BIT(0) +#define ADC_ARB_BTM_CNTRL1_SEL_OP_MODE BIT(1) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL1 BIT(2) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL2 BIT(3) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL3 BIT(4) +#define ADC_ARB_BTM_CNTRL1_MEAS_INTERVAL4 BIT(5) +#define ADC_ARB_BTM_CNTRL1_EOC BIT(6) +#define ADC_ARB_BTM_CNTRL1_REQ BIT(7) + +#define ADC_ARB_BTM_AMUX_CNTRL 0x17f +#define ADC_ARB_BTM_ANA_PARAM 0x180 +#define ADC_ARB_BTM_DIG_PARAM 0x181 +#define ADC_ARB_BTM_RSV 0x182 +#define ADC_ARB_BTM_DATA1 0x183 +#define ADC_ARB_BTM_DATA0 0x184 +#define ADC_ARB_BTM_BAT_COOL_THR1 0x185 +#define ADC_ARB_BTM_BAT_COOL_THR0 0x186 +#define ADC_ARB_BTM_BAT_WARM_THR1 0x187 +#define ADC_ARB_BTM_BAT_WARM_THR0 0x188 +#define ADC_ARB_BTM_CNTRL2 0x18c + +/* Proper ADC registers */ + +#define ADC_ARB_USRP_CNTRL 0x197 +#define ADC_ARB_USRP_CNTRL_EN_ARB BIT(0) +#define ADC_ARB_USRP_CNTRL_RSV1 BIT(1) +#define ADC_ARB_USRP_CNTRL_RSV2 BIT(2) +#define ADC_ARB_USRP_CNTRL_RSV3 BIT(3) +#define ADC_ARB_USRP_CNTRL_RSV4 BIT(4) +#define ADC_ARB_USRP_CNTRL_RSV5 BIT(5) +#define ADC_ARB_USRP_CNTRL_EOC BIT(6) +#define ADC_ARB_USRP_CNTRL_REQ BIT(7) + +#define ADC_ARB_USRP_AMUX_CNTRL 0x198 +/* + * The channel mask includes the bits selecting channel mux and prescaler + * on PM8058, or channel mux and premux on PM8921. + */ +#define ADC_ARB_USRP_AMUX_CNTRL_CHAN_MASK 0xfc +#define ADC_ARB_USRP_AMUX_CNTRL_RSV0 BIT(0) +#define ADC_ARB_USRP_AMUX_CNTRL_RSV1 BIT(1) +/* On PM8058 this is prescaling, on PM8921 this is premux */ +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX0 BIT(2) +#define ADC_ARB_USRP_AMUX_CNTRL_PRESCALEMUX1 BIT(3) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL0 BIT(4) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL1 BIT(5) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL2 BIT(6) +#define ADC_ARB_USRP_AMUX_CNTRL_SEL3 BIT(7) +#define ADC_AMUX_PREMUX_SHIFT 2 +#define ADC_AMUX_SEL_SHIFT 4 + +/* We know very little about the bits in this register */ +#define ADC_ARB_USRP_ANA_PARAM 0x199 +#define ADC_ARB_USRP_ANA_PARAM_DIS 0xFE +#define ADC_ARB_USRP_ANA_PARAM_EN 0xFF + +#define ADC_ARB_USRP_DIG_PARAM 0x19A +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 BIT(0) +#define ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 BIT(1) +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE0 BIT(2) +#define ADC_ARB_USRP_DIG_PARAM_CLK_RATE1 BIT(3) +#define ADC_ARB_USRP_DIG_PARAM_EOC BIT(4) +/* + * On a later ADC the decimation factors are defined as + * 00 = 512, 01 = 1024, 10 = 2048, 11 = 4096 so assume this + * holds also for this older XOADC. + */ +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE0 BIT(5) +#define ADC_ARB_USRP_DIG_PARAM_DEC_RATE1 BIT(6) +#define ADC_ARB_USRP_DIG_PARAM_EN BIT(7) +#define ADC_DIG_PARAM_DEC_SHIFT 5 + +#define ADC_ARB_USRP_RSV 0x19B +#define ADC_ARB_USRP_RSV_RST BIT(0) +#define ADC_ARB_USRP_RSV_DTEST0 BIT(1) +#define ADC_ARB_USRP_RSV_DTEST1 BIT(2) +#define ADC_ARB_USRP_RSV_OP BIT(3) +#define ADC_ARB_USRP_RSV_IP_SEL0 BIT(4) +#define ADC_ARB_USRP_RSV_IP_SEL1 BIT(5) +#define ADC_ARB_USRP_RSV_IP_SEL2 BIT(6) +#define ADC_ARB_USRP_RSV_TRM BIT(7) +#define ADC_RSV_IP_SEL_SHIFT 4 + +#define ADC_ARB_USRP_DATA0 0x19D +#define ADC_ARB_USRP_DATA1 0x19C + +/** + * Physical channels which MUST exist on all PM variants in order to provide + * proper reference points for calibration. + * + * @PM8XXX_CHANNEL_INTERNAL: 625mV reference channel + * @PM8XXX_CHANNEL_125V: 1250mV reference channel + * @PM8XXX_CHANNEL_INTERNAL_2: 325mV reference channel + * @PM8XXX_CHANNEL_MUXOFF: channel to reduce input load on mux, apparently also + * measures XO temperature + */ +#define PM8XXX_CHANNEL_INTERNAL 0x0c +#define PM8XXX_CHANNEL_125V 0x0d +#define PM8XXX_CHANNEL_INTERNAL_2 0x0e +#define PM8XXX_CHANNEL_MUXOFF 0x0f + +/* + * PM8058 AMUX premux scaling, two bits. This is done of the channel before + * reaching the AMUX. + */ +#define PM8058_AMUX_PRESCALE_0 0x0 /* No scaling on the signal */ +#define PM8058_AMUX_PRESCALE_1 0x1 /* Unity scaling selected by the user */ +#define PM8058_AMUX_PRESCALE_1_DIV3 0x2 /* 1/3 prescaler on the input */ + +/* Defines reference voltage for the XOADC */ +#define AMUX_RSV0 0x0 /* XO_IN/XOADC_GND, special selection to read XO temp */ +#define AMUX_RSV1 0x1 /* PMIC_IN/XOADC_GND */ +#define AMUX_RSV2 0x2 /* PMIC_IN/BMS_CSP */ +#define AMUX_RSV3 0x3 /* not used */ +#define AMUX_RSV4 0x4 /* XOADC_GND/XOADC_GND */ +#define AMUX_RSV5 0x5 /* XOADC_VREF/XOADC_GND */ +#define XOADC_RSV_MAX 5 /* 3 bits 0..7, 3 and 6,7 are invalid */ + +/** + * struct xoadc_channel - encodes channel properties and defaults + * @datasheet_name: the hardwarename of this channel + * @pre_scale_mux: prescale (PM8058) or premux (PM8921) for selecting + * this channel. Both this and the amux channel is needed to uniquely + * identify a channel. Values 0..3. + * @amux_channel: value of the ADC_ARB_USRP_AMUX_CNTRL register for this + * channel, bits 4..7, selects the amux, values 0..f + * @prescale: the channels have hard-coded prescale ratios defined + * by the hardware, this tells us what it is + * @type: corresponding IIO channel type, usually IIO_VOLTAGE or + * IIO_TEMP + * @scale_fn_type: the liner interpolation etc to convert the + * ADC code to the value that IIO expects, in uV or millicelsius + * etc. This scale function can be pretty elaborate if different + * thermistors are connected or other hardware characteristics are + * deployed. + * @amux_ip_rsv: ratiometric scale value used by the analog muxer: this + * selects the reference voltage for ratiometric scaling + */ +struct xoadc_channel { + const char *datasheet_name; + u8 pre_scale_mux:2; + u8 amux_channel:4; + const struct vadc_prescale_ratio prescale; + enum iio_chan_type type; + enum vadc_scale_fn_type scale_fn_type; + u8 amux_ip_rsv:3; +}; + +/** + * struct xoadc_variant - encodes the XOADC variant characteristics + * @name: name of this PMIC variant + * @channels: the hardware channels and respective settings and defaults + * @broken_ratiometric: if the PMIC has broken ratiometric scaling (this + * is a known problem on PM8058) + * @prescaling: this variant uses AMUX bits 2 & 3 for prescaling (PM8058) + * @second_level_mux: this variant uses AMUX bits 2 & 3 for a second level + * mux + */ +struct xoadc_variant { + const char name[16]; + const struct xoadc_channel *channels; + bool broken_ratiometric; + bool prescaling; + bool second_level_mux; +}; + +/* + * XOADC_CHAN macro parameters: + * _dname: the name of the channel + * _presmux: prescaler (PM8058) or premux (PM8921) setting for this channel + * _amux: the value in bits 2..7 of the ADC_ARB_USRP_AMUX_CNTRL register + * for this channel. On some PMICs some of the bits select a prescaler, and + * on some PMICs some of the bits select various complex multiplex settings. + * _type: IIO channel type + * _prenum: prescaler numerator (dividend) + * _preden: prescaler denominator (divisor) + * _scale: scaling function type, this selects how the raw valued is mangled + * to output the actual processed measurement + * _amip: analog mux input parent when using ratiometric measurements + */ +#define XOADC_CHAN(_dname, _presmux, _amux, _type, _prenum, _preden, _scale, _amip) \ + { \ + .datasheet_name = __stringify(_dname), \ + .pre_scale_mux = _presmux, \ + .amux_channel = _amux, \ + .prescale = { .num = _prenum, .den = _preden }, \ + .type = _type, \ + .scale_fn_type = _scale, \ + .amux_ip_rsv = _amip, \ + } + +/* + * Taken from arch/arm/mach-msm/board-9615.c in the vendor tree: + * TODO: incomplete, needs testing. + */ +static const struct xoadc_channel pm8018_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x02, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + /* Used for battery ID or battery temperature */ + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV2), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + { }, /* Sentinel */ +}; + +/* + * Taken from arch/arm/mach-msm/board-8930-pmic.c in the vendor tree: + * TODO: needs testing. + */ +static const struct xoadc_channel pm8038_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* AMUX8 used for battery temperature in most cases */ + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV2), + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + { }, /* Sentinel */ +}; + +/* + * This was created by cross-referencing the vendor tree + * arch/arm/mach-msm/board-msm8x60.c msm_adc_channels_data[] + * with the "channel types" (first field) to find the right + * configuration for these channels on an MSM8x60 i.e. PM8058 + * setup. + */ +static const struct xoadc_channel pm8058_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 10, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ICHG, 0x00, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + /* + * AMUX channels 5 thru 9 are referred to as MPP5 thru MPP9 in + * some code and documentation. But they are really just 5 + * channels just like any other. They are connected to a switching + * matrix where they can be routed to any of the MPPs, not just + * 1-to-1 onto MPP5 thru 9, so naming them MPP5 thru MPP9 is + * very confusing. + */ + XOADC_CHAN(AMUX5, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x00, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x00, 0x07, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8, 0x00, 0x08, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX9, 0x00, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(INTERNAL_2, 0x00, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + /* There are also "unity" and divided by 3 channels (prescaler) but noone is using them */ + { }, /* Sentinel */ +}; + +/* + * The PM8921 has some pre-muxing on its channels, this comes from the vendor tree + * include/linux/mfd/pm8xxx/pm8xxx-adc.h + * board-flo-pmic.c (Nexus 7) and board-8064-pmic.c + */ +static const struct xoadc_channel pm8921_xoadc_channels[] = { + XOADC_CHAN(VCOIN, 0x00, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(VBAT, 0x00, 0x01, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN, 0x00, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + /* channel "ICHG" is reserved and not used on PM8921 */ + XOADC_CHAN(VPH_PWR, 0x00, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(IBAT, 0x00, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* CHAN 6 & 7 (MPP1 & MPP2) are reserved for MPP channels on PM8921 */ + XOADC_CHAN(BATT_THERM, 0x00, 0x08, IIO_TEMP, 1, 1, SCALE_THERM_100K_PULLUP, AMUX_RSV1), + XOADC_CHAN(BATT_ID, 0x00, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(USB_VBUS, 0x00, 0x0a, IIO_VOLTAGE, 1, 4, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DIE_TEMP, 0x00, 0x0b, IIO_TEMP, 1, 1, SCALE_PMIC_THERM, AMUX_RSV1), + XOADC_CHAN(INTERNAL, 0x00, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(125V, 0x00, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* FIXME: look into the scaling of this temperature */ + XOADC_CHAN(CHG_TEMP, 0x00, 0x0e, IIO_TEMP, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(MUXOFF, 0x00, 0x0f, IIO_TEMP, 1, 1, SCALE_XOTHERM, AMUX_RSV0), + /* The following channels have premux bit 0 set to 1 (all end in 4) */ + XOADC_CHAN(ATEST_8, 0x01, 0x00, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* Set scaling to 1/2 based on the name for these two */ + XOADC_CHAN(USB_SNS_DIV20, 0x01, 0x01, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN_SNS_DIV20, 0x01, 0x02, IIO_VOLTAGE, 1, 2, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX3, 0x01, 0x03, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX4, 0x01, 0x04, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5, 0x01, 0x05, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6, 0x01, 0x06, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7, 0x01, 0x07, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8, 0x01, 0x08, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* Internal test signals, I think */ + XOADC_CHAN(ATEST_1, 0x01, 0x09, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_2, 0x01, 0x0a, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_3, 0x01, 0x0b, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_4, 0x01, 0x0c, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_5, 0x01, 0x0d, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_6, 0x01, 0x0e, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_7, 0x01, 0x0f, IIO_VOLTAGE, 1, 1, SCALE_DEFAULT, AMUX_RSV1), + /* The following channels have premux bit 1 set to 1 (all end in 8) */ + /* I guess even ATEST8 will be divided by 3 here */ + XOADC_CHAN(ATEST_8, 0x02, 0x00, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + /* I guess div 2 div 3 becomes div 6 */ + XOADC_CHAN(USB_SNS_DIV20_DIV3, 0x02, 0x01, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(DCIN_SNS_DIV20_DIV3, 0x02, 0x02, IIO_VOLTAGE, 1, 6, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX3_DIV3, 0x02, 0x03, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX4_DIV3, 0x02, 0x04, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX5_DIV3, 0x02, 0x05, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX6_DIV3, 0x02, 0x06, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX7_DIV3, 0x02, 0x07, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(AMUX8_DIV3, 0x02, 0x08, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_1_DIV3, 0x02, 0x09, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_2_DIV3, 0x02, 0x0a, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_3_DIV3, 0x02, 0x0b, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_4_DIV3, 0x02, 0x0c, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_5_DIV3, 0x02, 0x0d, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_6_DIV3, 0x02, 0x0e, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + XOADC_CHAN(ATEST_7_DIV3, 0x02, 0x0f, IIO_VOLTAGE, 1, 3, SCALE_DEFAULT, AMUX_RSV1), + { }, /* Sentinel */ +}; + +/** + * struct pm8xxx_chan_info - ADC channel information + * @name: name of this channel + * @hwchan: pointer to hardware channel information (muxing & scaling settings) + * @calibration: whether to use absolute or ratiometric calibration + * @scale_fn_type: scaling function type + * @decimation: 0,1,2,3 + * @amux_ip_rsv: ratiometric scale value if using ratiometric + * calibration: 0, 1, 2, 4, 5. + */ +struct pm8xxx_chan_info { + const char *name; + const struct xoadc_channel *hwchan; + enum vadc_calibration calibration; + u8 decimation:2; + u8 amux_ip_rsv:3; +}; + +/** + * struct pm8xxx_xoadc - state container for the XOADC + * @dev: pointer to device + * @map: regmap to access registers + * @vref: reference voltage regulator + * characteristics of the channels, and sensible default settings + * @nchans: number of channels, configured by the device tree + * @chans: the channel information per-channel, configured by the device tree + * @iio_chans: IIO channel specifiers + * @graph: linear calibration parameters for absolute and + * ratiometric measurements + * @complete: completion to indicate end of conversion + * @lock: lock to restrict access to the hardware to one client at the time + */ +struct pm8xxx_xoadc { + struct device *dev; + struct regmap *map; + const struct xoadc_variant *variant; + struct regulator *vref; + unsigned int nchans; + struct pm8xxx_chan_info *chans; + struct iio_chan_spec *iio_chans; + struct vadc_linear_graph graph[2]; + struct completion complete; + struct mutex lock; +}; + +static irqreturn_t pm8xxx_eoc_irq(int irq, void *d) +{ + struct iio_dev *indio_dev = d; + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + + complete(&adc->complete); + + return IRQ_HANDLED; +} + +static struct pm8xxx_chan_info * +pm8xxx_get_channel(struct pm8xxx_xoadc *adc, u8 chan) +{ + struct pm8xxx_chan_info *ch; + int i; + + for (i = 0; i < adc->nchans; i++) { + ch = &adc->chans[i]; + if (ch->hwchan->amux_channel == chan) + break; + } + if (i == adc->nchans) + return NULL; + + return ch; +} + +static int pm8xxx_read_channel_rsv(struct pm8xxx_xoadc *adc, + const struct pm8xxx_chan_info *ch, + u8 rsv, u16 *adc_code, + bool force_ratiometric) +{ + int ret; + unsigned int val; + u8 rsvmask, rsvval; + u8 lsb, msb; + + dev_dbg(adc->dev, "read channel \"%s\", amux %d, prescale/mux: %d, rsv %d\n", + ch->name, ch->hwchan->amux_channel, ch->hwchan->pre_scale_mux, rsv); + + mutex_lock(&adc->lock); + + /* Mux in this channel */ + val = ch->hwchan->amux_channel << ADC_AMUX_SEL_SHIFT; + val |= ch->hwchan->pre_scale_mux << ADC_AMUX_PREMUX_SHIFT; + ret = regmap_write(adc->map, ADC_ARB_USRP_AMUX_CNTRL, val); + if (ret) + goto unlock; + + /* Set up ratiometric scale value, mask off all bits except these */ + rsvmask = (ADC_ARB_USRP_RSV_RST | ADC_ARB_USRP_RSV_DTEST0 | + ADC_ARB_USRP_RSV_DTEST1 | ADC_ARB_USRP_RSV_OP); + if (adc->variant->broken_ratiometric && !force_ratiometric) { + /* + * Apparently the PM8058 has some kind of bug which is + * reflected in the vendor tree drivers/misc/pmix8058-xoadc.c + * which just hardcodes the RSV selector to SEL1 (0x20) for + * most cases and SEL0 (0x10) for the MUXOFF channel only. + * If we force ratiometric (currently only done when attempting + * to do ratiometric calibration) this doesn't seem to work + * very well and I suspect ratiometric conversion is simply + * broken or not supported on the PM8058. + * + * Maybe IO_SEL2 doesn't exist on PM8058 and bits 4 & 5 select + * the mode alone. + * + * Some PM8058 register documentation would be nice to get + * this right. + */ + if (ch->hwchan->amux_channel == PM8XXX_CHANNEL_MUXOFF) + rsvval = ADC_ARB_USRP_RSV_IP_SEL0; + else + rsvval = ADC_ARB_USRP_RSV_IP_SEL1; + } else { + if (rsv == 0xff) + rsvval = (ch->amux_ip_rsv << ADC_RSV_IP_SEL_SHIFT) | + ADC_ARB_USRP_RSV_TRM; + else + rsvval = (rsv << ADC_RSV_IP_SEL_SHIFT) | + ADC_ARB_USRP_RSV_TRM; + } + + ret = regmap_update_bits(adc->map, + ADC_ARB_USRP_RSV, + ~rsvmask, + rsvval); + if (ret) + goto unlock; + + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, + ADC_ARB_USRP_ANA_PARAM_DIS); + if (ret) + goto unlock; + + /* Decimation factor */ + ret = regmap_write(adc->map, ADC_ARB_USRP_DIG_PARAM, + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT0 | + ADC_ARB_USRP_DIG_PARAM_SEL_SHIFT1 | + ch->decimation << ADC_DIG_PARAM_DEC_SHIFT); + if (ret) + goto unlock; + + ret = regmap_write(adc->map, ADC_ARB_USRP_ANA_PARAM, + ADC_ARB_USRP_ANA_PARAM_EN); + if (ret) + goto unlock; + + /* Enable the arbiter, the Qualcomm code does it twice like this */ + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB); + if (ret) + goto unlock; + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB); + if (ret) + goto unlock; + + + /* Fire a request! */ + reinit_completion(&adc->complete); + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, + ADC_ARB_USRP_CNTRL_EN_ARB | + ADC_ARB_USRP_CNTRL_REQ); + if (ret) + goto unlock; + + /* Next the interrupt occurs */ + ret = wait_for_completion_timeout(&adc->complete, + VADC_CONV_TIME_MAX_US); + if (!ret) { + dev_err(adc->dev, "conversion timed out\n"); + ret = -ETIMEDOUT; + goto unlock; + } + + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA0, &val); + if (ret) + goto unlock; + lsb = val; + ret = regmap_read(adc->map, ADC_ARB_USRP_DATA1, &val); + if (ret) + goto unlock; + msb = val; + *adc_code = (msb << 8) | lsb; + + /* Turn off the ADC by setting the arbiter to 0 twice */ + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); + if (ret) + goto unlock; + ret = regmap_write(adc->map, ADC_ARB_USRP_CNTRL, 0); + if (ret) + goto unlock; + +unlock: + mutex_unlock(&adc->lock); + return ret; +} + +static int pm8xxx_read_channel(struct pm8xxx_xoadc *adc, + const struct pm8xxx_chan_info *ch, + u16 *adc_code) +{ + /* + * Normally we just use the ratiometric scale value (RSV) predefined + * for the channel, but during calibration we need to modify this + * so this wrapper is a helper hiding the more complex version. + */ + return pm8xxx_read_channel_rsv(adc, ch, 0xff, adc_code, false); +} + +static int pm8xxx_calibrate_device(struct pm8xxx_xoadc *adc) +{ + const struct pm8xxx_chan_info *ch; + u16 read_1250v; + u16 read_0625v; + u16 read_nomux_rsv5; + u16 read_nomux_rsv4; + int ret; + + adc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV; + adc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE; + + /* Common reference channel calibration */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel(adc, ch, &read_1250v); + if (ret) { + dev_err(adc->dev, "could not read 1.25V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel(adc, ch, &read_0625v); + if (ret) { + dev_err(adc->dev, "could not read 0.625V reference channel\n"); + return -ENODEV; + } + if (read_1250v == read_0625v) { + dev_err(adc->dev, "read same ADC code for 1.25V and 0.625V\n"); + return -ENODEV; + } + + adc->graph[VADC_CALIB_ABSOLUTE].dy = read_1250v - read_0625v; + adc->graph[VADC_CALIB_ABSOLUTE].gnd = read_0625v; + + dev_info(adc->dev, "absolute calibration dx = %d uV, dy = %d units\n", + VADC_ABSOLUTE_RANGE_UV, adc->graph[VADC_CALIB_ABSOLUTE].dy); + + /* Ratiometric calibration */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); + if (!ch) + return -ENODEV; + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV5, + &read_nomux_rsv5, true); + if (ret) { + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); + return -ENODEV; + } + ret = pm8xxx_read_channel_rsv(adc, ch, AMUX_RSV4, + &read_nomux_rsv4, true); + if (ret) { + dev_err(adc->dev, "could not read MUXOFF reference channel\n"); + return -ENODEV; + } + adc->graph[VADC_CALIB_RATIOMETRIC].dy = + read_nomux_rsv5 - read_nomux_rsv4; + adc->graph[VADC_CALIB_RATIOMETRIC].gnd = read_nomux_rsv4; + + dev_info(adc->dev, "ratiometric calibration dx = %d, dy = %d units\n", + VADC_RATIOMETRIC_RANGE, + adc->graph[VADC_CALIB_RATIOMETRIC].dy); + + return 0; +} + +static int pm8xxx_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + const struct pm8xxx_chan_info *ch; + u16 adc_code; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_PROCESSED: + ch = pm8xxx_get_channel(adc, chan->address); + if (!ch) { + dev_err(adc->dev, "no such channel %lu\n", + chan->address); + return -EINVAL; + } + ret = pm8xxx_read_channel(adc, ch, &adc_code); + if (ret) + return ret; + + ret = qcom_vadc_scale(ch->hwchan->scale_fn_type, + &adc->graph[ch->calibration], + &ch->hwchan->prescale, + (ch->calibration == VADC_CALIB_ABSOLUTE), + adc_code, val); + if (ret) + return ret; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_RAW: + ch = pm8xxx_get_channel(adc, chan->address); + if (!ch) { + dev_err(adc->dev, "no such channel %lu\n", + chan->address); + return -EINVAL; + } + ret = pm8xxx_read_channel(adc, ch, &adc_code); + if (ret) + return ret; + + *val = (int)adc_code; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int pm8xxx_of_xlate(struct iio_dev *indio_dev, + const struct of_phandle_args *iiospec) +{ + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + u8 pre_scale_mux; + u8 amux_channel; + unsigned int i; + + /* + * First cell is prescaler or premux, second cell is analog + * mux. + */ + if (iiospec->args_count != 2) { + dev_err(&indio_dev->dev, "wrong number of arguments for %s need 2 got %d\n", + iiospec->np->name, + iiospec->args_count); + return -EINVAL; + } + pre_scale_mux = (u8)iiospec->args[0]; + amux_channel = (u8)iiospec->args[1]; + dev_dbg(&indio_dev->dev, "pre scale/mux: %02x, amux: %02x\n", + pre_scale_mux, amux_channel); + + /* We need to match exactly on the prescale/premux and channel */ + for (i = 0; i < adc->nchans; i++) + if (adc->chans[i].hwchan->pre_scale_mux == pre_scale_mux && + adc->chans[i].hwchan->amux_channel == amux_channel) + return i; + + return -EINVAL; +} + +static const struct iio_info pm8xxx_xoadc_info = { + .driver_module = THIS_MODULE, + .of_xlate = pm8xxx_of_xlate, + .read_raw = pm8xxx_read_raw, +}; + +static int pm8xxx_xoadc_parse_channel(struct device *dev, + struct device_node *np, + const struct xoadc_channel *hw_channels, + struct iio_chan_spec *iio_chan, + struct pm8xxx_chan_info *ch) +{ + const char *name = np->name; + const struct xoadc_channel *hwchan; + u32 pre_scale_mux, amux_channel; + u32 rsv, dec; + int ret; + int chid; + + ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux); + if (ret) { + dev_err(dev, "invalid pre scale/mux number %s\n", name); + return ret; + } + ret = of_property_read_u32_index(np, "reg", 1, &amux_channel); + if (ret) { + dev_err(dev, "invalid amux channel number %s\n", name); + return ret; + } + + /* Find the right channel setting */ + chid = 0; + hwchan = &hw_channels[0]; + while (hwchan && hwchan->datasheet_name) { + if (hwchan->pre_scale_mux == pre_scale_mux && + hwchan->amux_channel == amux_channel) + break; + hwchan++; + chid++; + } + /* The sentinel does not have a name assigned */ + if (!hwchan->datasheet_name) { + dev_err(dev, "could not locate channel %02x/%02x\n", + pre_scale_mux, amux_channel); + return -EINVAL; + } + ch->name = name; + ch->hwchan = hwchan; + /* Everyone seems to use absolute calibration except in special cases */ + ch->calibration = VADC_CALIB_ABSOLUTE; + /* Everyone seems to use default ("type 2") decimation */ + ch->decimation = VADC_DEF_DECIMATION; + + if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) { + ch->calibration = VADC_CALIB_RATIOMETRIC; + if (rsv > XOADC_RSV_MAX) { + dev_err(dev, "%s too large RSV value %d\n", name, rsv); + return -EINVAL; + } + if (rsv == AMUX_RSV3) { + dev_err(dev, "%s invalid RSV value %d\n", name, rsv); + return -EINVAL; + } + } + + /* Optional decimation, if omitted we use the default */ + ret = of_property_read_u32(np, "qcom,decimation", &dec); + if (!ret) { + ret = qcom_vadc_decimation_from_dt(dec); + if (ret < 0) { + dev_err(dev, "%s invalid decimation %d\n", + name, dec); + return ret; + } + ch->decimation = ret; + } + + iio_chan->channel = chid; + iio_chan->address = hwchan->amux_channel; + iio_chan->datasheet_name = hwchan->datasheet_name; + iio_chan->type = hwchan->type; + /* All channels are raw or processed */ + iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_PROCESSED); + iio_chan->indexed = 1; + + dev_dbg(dev, "channel [PRESCALE/MUX: %02x AMUX: %02x] \"%s\" " + "ref voltage: %d, decimation %d " + "prescale %d/%d, scale function %d\n", + hwchan->pre_scale_mux, hwchan->amux_channel, ch->name, + ch->amux_ip_rsv, ch->decimation, hwchan->prescale.num, + hwchan->prescale.den, hwchan->scale_fn_type); + + return 0; +} + +static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc, + struct device_node *np) +{ + struct device_node *child; + struct pm8xxx_chan_info *ch; + int ret; + int i; + + adc->nchans = of_get_available_child_count(np); + if (!adc->nchans) { + dev_err(adc->dev, "no channel children\n"); + return -ENODEV; + } + dev_dbg(adc->dev, "found %d ADC channels\n", adc->nchans); + + adc->iio_chans = devm_kcalloc(adc->dev, adc->nchans, + sizeof(*adc->iio_chans), GFP_KERNEL); + if (!adc->iio_chans) + return -ENOMEM; + + adc->chans = devm_kcalloc(adc->dev, adc->nchans, + sizeof(*adc->chans), GFP_KERNEL); + if (!adc->chans) + return -ENOMEM; + + i = 0; + for_each_available_child_of_node(np, child) { + ch = &adc->chans[i]; + ret = pm8xxx_xoadc_parse_channel(adc->dev, child, + adc->variant->channels, + &adc->iio_chans[i], + ch); + if (ret) { + of_node_put(child); + return ret; + } + i++; + } + + /* Check for required channels */ + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_125V); + if (!ch) { + dev_err(adc->dev, "missing 1.25V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_INTERNAL); + if (!ch) { + dev_err(adc->dev, "missing 0.625V reference channel\n"); + return -ENODEV; + } + ch = pm8xxx_get_channel(adc, PM8XXX_CHANNEL_MUXOFF); + if (!ch) { + dev_err(adc->dev, "missing MUXOFF reference channel\n"); + return -ENODEV; + } + + return 0; +} + +static int pm8xxx_xoadc_probe(struct platform_device *pdev) +{ + const struct xoadc_variant *variant; + struct pm8xxx_xoadc *adc; + struct iio_dev *indio_dev; + struct device_node *np = pdev->dev.of_node; + struct regmap *map; + struct device *dev = &pdev->dev; + int ret; + + variant = of_device_get_match_data(dev); + if (!variant) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + platform_set_drvdata(pdev, indio_dev); + + adc = iio_priv(indio_dev); + adc->dev = dev; + adc->variant = variant; + init_completion(&adc->complete); + mutex_init(&adc->lock); + + ret = pm8xxx_xoadc_parse_channels(adc, np); + if (ret) + return ret; + + map = dev_get_regmap(dev->parent, NULL); + if (!map) { + dev_err(dev, "parent regmap unavailable.\n"); + return -ENXIO; + } + adc->map = map; + + /* Bring up regulator */ + adc->vref = devm_regulator_get(dev, "xoadc-ref"); + if (IS_ERR(adc->vref)) { + dev_err(dev, "failed to get XOADC VREF regulator\n"); + return PTR_ERR(adc->vref); + } + ret = regulator_enable(adc->vref); + if (ret) { + dev_err(dev, "failed to enable XOADC VREF regulator\n"); + return ret; + } + + ret = devm_request_threaded_irq(dev, platform_get_irq(pdev, 0), + pm8xxx_eoc_irq, NULL, 0, variant->name, indio_dev); + if (ret) { + dev_err(dev, "unable to request IRQ\n"); + goto out_disable_vref; + } + + indio_dev->dev.parent = dev; + indio_dev->dev.of_node = np; + indio_dev->name = variant->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &pm8xxx_xoadc_info; + indio_dev->channels = adc->iio_chans; + indio_dev->num_channels = adc->nchans; + + ret = iio_device_register(indio_dev); + if (ret) + goto out_disable_vref; + + ret = pm8xxx_calibrate_device(adc); + if (ret) + goto out_unreg_device; + + dev_info(dev, "%s XOADC driver enabled\n", variant->name); + + return 0; + +out_unreg_device: + iio_device_unregister(indio_dev); +out_disable_vref: + regulator_disable(adc->vref); + + return ret; +} + +static int pm8xxx_xoadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct pm8xxx_xoadc *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + regulator_disable(adc->vref); + + return 0; +} + +static const struct xoadc_variant pm8018_variant = { + .name = "PM8018-XOADC", + .channels = pm8018_xoadc_channels, +}; + +static const struct xoadc_variant pm8038_variant = { + .name = "PM8038-XOADC", + .channels = pm8038_xoadc_channels, +}; + +static const struct xoadc_variant pm8058_variant = { + .name = "PM8058-XOADC", + .channels = pm8058_xoadc_channels, + .broken_ratiometric = true, + .prescaling = true, +}; + +static const struct xoadc_variant pm8921_variant = { + .name = "PM8921-XOADC", + .channels = pm8921_xoadc_channels, + .second_level_mux = true, +}; + +static const struct of_device_id pm8xxx_xoadc_id_table[] = { + { + .compatible = "qcom,pm8018-adc", + .data = &pm8018_variant, + }, + { + .compatible = "qcom,pm8038-adc", + .data = &pm8038_variant, + }, + { + .compatible = "qcom,pm8058-adc", + .data = &pm8058_variant, + }, + { + .compatible = "qcom,pm8921-adc", + .data = &pm8921_variant, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, pm8xxx_xoadc_id_table); + +static struct platform_driver pm8xxx_xoadc_driver = { + .driver = { + .name = "pm8xxx-adc", + .of_match_table = pm8xxx_xoadc_id_table, + }, + .probe = pm8xxx_xoadc_probe, + .remove = pm8xxx_xoadc_remove, +}; +module_platform_driver(pm8xxx_xoadc_driver); + +MODULE_DESCRIPTION("PM8xxx XOADC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pm8xxx-xoadc");
The Qualcomm PM8xxx PMICs contain a simpler ADC than its successors (already in the kernel as qcom-spmi-vadc.c): the HK/XO ADC (Housekeeping/Chrystal oscillator ADC). As far as I can understand this is equal to the PMICs using SSBI transport and encompass PM8018, PM8038, PM8058, and PM8921, so this is shortly named PM8xxx. This ADC monitors a bunch of on-board voltages and the die temperature of the PMIC itself, but it can also be routed to convert a few external MPPs (multi-purpose pins). On the APQ8060 DragonBoard this feature is used to let this ADC convert an analog ALS (Ambient Light Sensor) voltage signal from a Capella CM3605 ALS into a LUX value. Developed and tested with APQ8060 DragonBoard based on Ivan's driver and Rama Krishna's patches. The SPMI VADC driver is quite different, but share enough minor functionality that I have split out to the common file in a previous patch. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: Ivan T. Ivanov <iivanov.xz@gmail.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Rama Krishna Phani A <rphani@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v4->v5: - Fix the kbuild for allmod and allyes as described earlier. - Add a per-variant information container instead of just adding a list of channels to the match data. Use this variant information throughout the code to support the variations. - Incorporate new information from Björn and Stephen about how the channels actually work on the different variants. PM8058 has 16 channels that can be muxed to different sources, so an AMUX setting each. The PM8921 is more complex because it has a premux instead of a prescaler. - To deal with the premux addressing scheme we turn all channel specifiers into twocell, where the first cell is prescaler or premux and the second one is the analog mux. - Rebase on build fixes. ChangeLog v3->v4: - Only reposting this patch as the DT bindings and refactorings are merged. - Prefix all channel names with PM8XXX_* to avoid namespace clashes. - Use the compatible string to name the IIO device for greater model precision. - Fix up a few excess newlines. ChangeLog v2->v3: - Rebase using Rama Krishna's improvements, set up defaults for scaling function and prescaler for each channel, per ASIC variant. - Also set up RSV per-variant as the vendor tree does this and it seems necessary to set RSV0 on the muxoff channel to get readings from the XO thermistor. - Encode default IIO type in the default per-PMIC channel table. - Fixed a bug in ratiometric calibration (needed to force ratiometric mode). - Dropped PM8917: that doesn't have any XOADC. - Added a special flag for the PM8058: it apparently needs special RSV muxing due to being necessarily different. - Augmented to handle altered ratiometric DT property. - Do not hardcode that the reference voltage must be 2.2V, just fetch and enable the regulator. Different PMICs use different reference voltages. ChangeLog v1->v2: - Introduce a mutex to avoid different clients stepping on each others' toes - Add an of_xlate function to be sure to match the right ADC - Add all compatible strings, not just PM8058 --- drivers/iio/adc/Kconfig | 11 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/qcom-pm8xxx-xoadc.c | 1036 +++++++++++++++++++++++++++++++++++ 3 files changed, 1048 insertions(+) create mode 100644 drivers/iio/adc/qcom-pm8xxx-xoadc.c -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html