diff mbox series

[RFC,1/2] mmc: sdhci: add quirk SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER

Message ID 20170628133504.17422-2-srinivas.kandagatla@linaro.org
State New
Headers show
Series mmc: sdhci: Add SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER | expand

Commit Message

Srinivas Kandagatla June 28, 2017, 1:35 p.m. UTC
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


This patch adds quirk to sdhci controllers which are broken when
HOST SDMA Buffer Boundary is programmed in Block Size Register (0x04)
when using ADMA. Qualcomm sdhci controller is one of such type, writing
to this bits is un-supported.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/mmc/host/sdhci.c | 24 ++++++++++++++++++------
 drivers/mmc/host/sdhci.h |  2 ++
 2 files changed, 20 insertions(+), 6 deletions(-)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Adrian Hunter July 17, 2017, 12:47 p.m. UTC | #1
On 11/07/17 16:49, Ulf Hansson wrote:
> On 28 June 2017 at 15:35,  <srinivas.kandagatla@linaro.org> wrote:

>> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

>>

>> This patch adds quirk to sdhci controllers which are broken when

>> HOST SDMA Buffer Boundary is programmed in Block Size Register (0x04)

>> when using ADMA. Qualcomm sdhci controller is one of such type, writing

>> to this bits is un-supported.

>>

>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

>> ---

>>  drivers/mmc/host/sdhci.c | 24 ++++++++++++++++++------

>>  drivers/mmc/host/sdhci.h |  2 ++

>>  2 files changed, 20 insertions(+), 6 deletions(-)

>>

>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c

>> index ecd0d4350e8a..d68ff1955761 100644

>> --- a/drivers/mmc/host/sdhci.c

>> +++ b/drivers/mmc/host/sdhci.c

>> @@ -765,6 +765,20 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)

>>         }

>>  }

>>

>> +static void sdhci_set_blk_size_reg(struct sdhci_host *host,

>> +                                  unsigned int sdma_boundary,

>> +                                  unsigned int blksz)

>> +{

>> +       if ((host->quirks2 & SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER) &&

>> +                       (host->flags & SDHCI_USE_ADMA)) {

>> +               sdhci_writew(host, SDHCI_MAKE_BLKSZ(0, blksz),

>> +                            SDHCI_BLOCK_SIZE);

>> +       } else {

>> +               sdhci_writew(host, SDHCI_MAKE_BLKSZ(sdma_boundary, blksz),

>> +                            SDHCI_BLOCK_SIZE);

>> +       }

>> +}

>> +

>>  static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)

>>  {

>>         u8 ctrl;

>> @@ -897,8 +911,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)

>>         sdhci_set_transfer_irqs(host);

>>

>>         /* Set the DMA boundary value and block size */

>> -       sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,

>> -               data->blksz), SDHCI_BLOCK_SIZE);

>> +       sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, data->blksz);

>>         sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);

>>  }

>>

>> @@ -2052,9 +2065,9 @@ static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)

>>          */

>>         if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200 &&

>>             mmc->ios.bus_width == MMC_BUS_WIDTH_8)

>> -               sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), SDHCI_BLOCK_SIZE);

>> +               sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 128);

>>         else

>> -               sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), SDHCI_BLOCK_SIZE);

>> +               sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 64);

>>

>>         /*

>>          * The tuning block is sent by the card to the host controller.

>> @@ -2998,8 +3011,7 @@ void sdhci_cqe_enable(struct mmc_host *mmc)

>>                 ctrl |= SDHCI_CTRL_ADMA32;

>>         sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);

>>

>> -       sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 512),

>> -                    SDHCI_BLOCK_SIZE);

>> +       sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 512);

>>

>>         /* Set maximum timeout */

>>         sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL);

>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h

>> index 0469fa191493..9a1343509bb5 100644

>> --- a/drivers/mmc/host/sdhci.h

>> +++ b/drivers/mmc/host/sdhci.h

>> @@ -435,6 +435,8 @@ struct sdhci_host {

>>  #define SDHCI_QUIRK2_ACMD23_BROKEN                     (1<<14)

>>  /* Broken Clock divider zero in controller */

>>  #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN             (1<<15)

>> +/* Controller doesn't support sdma boundray buffer setup when using ADMA */

>> +#define SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER       (1<<16)

>>

>>         int irq;                /* Device IRQ */

>>         void __iomem *ioaddr;   /* Mapped address */

>> --

>> 2.11.0

>>

> 

> This change seems like a reasonable justification for adding a new

> SDHCI quirk, even if we in general wants to avoid that.

> 

> Adrian?


If we add a quirk for every register we end up with a very ugly version of
CONFIG_MMC_SDHCI_IO_ACCESSORS.  So CONFIG_MMC_SDHCI_IO_ACCESSORS is a better
option.  Another possibility is to add a member to struct sdhci_host,
initialized to SDHCI_DEFAULT_BOUNDARY_ARG, and write that.  Drivers could
then change the value if necessary.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ecd0d4350e8a..d68ff1955761 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -765,6 +765,20 @@  static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	}
 }
 
+static void sdhci_set_blk_size_reg(struct sdhci_host *host,
+				   unsigned int sdma_boundary,
+				   unsigned int blksz)
+{
+	if ((host->quirks2 & SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER) &&
+			(host->flags & SDHCI_USE_ADMA)) {
+		sdhci_writew(host, SDHCI_MAKE_BLKSZ(0, blksz),
+			     SDHCI_BLOCK_SIZE);
+	} else {
+		sdhci_writew(host, SDHCI_MAKE_BLKSZ(sdma_boundary, blksz),
+			     SDHCI_BLOCK_SIZE);
+	}
+}
+
 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 {
 	u8 ctrl;
@@ -897,8 +911,7 @@  static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 	sdhci_set_transfer_irqs(host);
 
 	/* Set the DMA boundary value and block size */
-	sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
-		data->blksz), SDHCI_BLOCK_SIZE);
+	sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, data->blksz);
 	sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
 }
 
@@ -2052,9 +2065,9 @@  static void sdhci_send_tuning(struct sdhci_host *host, u32 opcode)
 	 */
 	if (cmd.opcode == MMC_SEND_TUNING_BLOCK_HS200 &&
 	    mmc->ios.bus_width == MMC_BUS_WIDTH_8)
-		sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 128), SDHCI_BLOCK_SIZE);
+		sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 128);
 	else
-		sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, 64), SDHCI_BLOCK_SIZE);
+		sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 64);
 
 	/*
 	 * The tuning block is sent by the card to the host controller.
@@ -2998,8 +3011,7 @@  void sdhci_cqe_enable(struct mmc_host *mmc)
 		ctrl |= SDHCI_CTRL_ADMA32;
 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
-	sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG, 512),
-		     SDHCI_BLOCK_SIZE);
+	sdhci_set_blk_size_reg(host, SDHCI_DEFAULT_BOUNDARY_ARG, 512);
 
 	/* Set maximum timeout */
 	sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 0469fa191493..9a1343509bb5 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -435,6 +435,8 @@  struct sdhci_host {
 #define SDHCI_QUIRK2_ACMD23_BROKEN			(1<<14)
 /* Broken Clock divider zero in controller */
 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN		(1<<15)
+/* Controller doesn't support sdma boundray buffer setup when using ADMA */
+#define SDHCI_QUIRK2_BROKEN_SDMA_BOUNDARY_BUFFER	(1<<16)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */