| Message ID | 20170805205222.19868-6-ard.biesheuvel@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: add and use convenience macros for PC relative references | expand |
* Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: > Replace the open coded PC relative offset calculations with a pair > of adr_l invocations. > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > arch/arm/kernel/head.S | 12 ++---------- > 1 file changed, 2 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > index 6e9df3663a57..aed341e0f530 100644 > --- a/arch/arm/kernel/head.S > +++ b/arch/arm/kernel/head.S > @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian > retne lr > > __fixup_smp_on_up: > - adr r0, 1f > - ldmia r0, {r3 - r5} > - sub r3, r0, r3 > - add r4, r4, r3 > - add r5, r5, r3 > + adr_l r4, __smpalt_begin > + adr_l r5, __smpalt_end > b __do_fixup_smp_on_up > ENDPROC(__fixup_smp) > > - .align > -1: .word . > - .word __smpalt_begin > - .word __smpalt_end > - > .pushsection .data > .globl smp_on_up > smp_on_up: Ard, it's this one that cause boot to fail on omap3. The rest of your set works for me with just this one left out. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: >> Replace the open coded PC relative offset calculations with a pair >> of adr_l invocations. >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> --- >> arch/arm/kernel/head.S | 12 ++---------- >> 1 file changed, 2 insertions(+), 10 deletions(-) >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> index 6e9df3663a57..aed341e0f530 100644 >> --- a/arch/arm/kernel/head.S >> +++ b/arch/arm/kernel/head.S >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian >> retne lr >> >> __fixup_smp_on_up: >> - adr r0, 1f >> - ldmia r0, {r3 - r5} >> - sub r3, r0, r3 >> - add r4, r4, r3 >> - add r5, r5, r3 >> + adr_l r4, __smpalt_begin >> + adr_l r5, __smpalt_end >> b __do_fixup_smp_on_up >> ENDPROC(__fixup_smp) >> >> - .align >> -1: .word . >> - .word __smpalt_begin >> - .word __smpalt_end >> - >> .pushsection .data >> .globl smp_on_up >> smp_on_up: > > Ard, it's this one that cause boot to fail on omap3. > The rest of your set works for me with just this one > left out. > I'm completely puzzled. The change is so simple that it is difficult to reduce it in parts, but if you still have the time to spare, mind trying the diff below? .globl smp_on_up The main point of these changes is to eliminate absolute references, not to use the new macros, so if this does work, I will go with this instead. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmldiff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 6e9df3663a57..c0361e608210 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -524,17 +524,15 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian __fixup_smp_on_up: adr r0, 1f - ldmia r0, {r3 - r5} - sub r3, r0, r3 - add r4, r4, r3 - add r5, r5, r3 + ldmia r0, {r4 - r5} + add r4, r4, r0 + add r5, r5, r0 b __do_fixup_smp_on_up ENDPROC(__fixup_smp) .align -1: .word . - .word __smpalt_begin - .word __smpalt_end +1: .word __smpalt_begin - 1b + .word __smpalt_end - 1b .pushsection .data
On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: > > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: > >> Replace the open coded PC relative offset calculations with a pair > >> of adr_l invocations. > >> > >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > >> --- > >> arch/arm/kernel/head.S | 12 ++---------- > >> 1 file changed, 2 insertions(+), 10 deletions(-) > >> > >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > >> index 6e9df3663a57..aed341e0f530 100644 > >> --- a/arch/arm/kernel/head.S > >> +++ b/arch/arm/kernel/head.S > >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian > >> retne lr > >> > >> __fixup_smp_on_up: > >> - adr r0, 1f > >> - ldmia r0, {r3 - r5} > >> - sub r3, r0, r3 > >> - add r4, r4, r3 > >> - add r5, r5, r3 > >> + adr_l r4, __smpalt_begin > >> + adr_l r5, __smpalt_end > >> b __do_fixup_smp_on_up > >> ENDPROC(__fixup_smp) > >> > >> - .align > >> -1: .word . > >> - .word __smpalt_begin > >> - .word __smpalt_end > >> - > >> .pushsection .data > >> .globl smp_on_up > >> smp_on_up: > > > > Ard, it's this one that cause boot to fail on omap3. > > The rest of your set works for me with just this one > > left out. > > > > I'm completely puzzled. Found it. You replaced: - adr r0, 1f - ldmia r0, {r3 - r5} - sub r3, r0, r3 - add r4, r4, r3 - add r5, r5, r3 + adr_l r4, __smpalt_begin + adr_l r5, __smpalt_end b __do_fixup_smp_on_up Notice that r3 is now uninitialized. Now have a look at the code for __do_fixup_smp_on_up. Nicolas -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11 August 2017 at 20:58, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > >> On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: >> > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: >> >> Replace the open coded PC relative offset calculations with a pair >> >> of adr_l invocations. >> >> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> >> --- >> >> arch/arm/kernel/head.S | 12 ++---------- >> >> 1 file changed, 2 insertions(+), 10 deletions(-) >> >> >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> >> index 6e9df3663a57..aed341e0f530 100644 >> >> --- a/arch/arm/kernel/head.S >> >> +++ b/arch/arm/kernel/head.S >> >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian >> >> retne lr >> >> >> >> __fixup_smp_on_up: >> >> - adr r0, 1f >> >> - ldmia r0, {r3 - r5} >> >> - sub r3, r0, r3 >> >> - add r4, r4, r3 >> >> - add r5, r5, r3 >> >> + adr_l r4, __smpalt_begin >> >> + adr_l r5, __smpalt_end >> >> b __do_fixup_smp_on_up >> >> ENDPROC(__fixup_smp) >> >> >> >> - .align >> >> -1: .word . >> >> - .word __smpalt_begin >> >> - .word __smpalt_end >> >> - >> >> .pushsection .data >> >> .globl smp_on_up >> >> smp_on_up: >> > >> > Ard, it's this one that cause boot to fail on omap3. >> > The rest of your set works for me with just this one >> > left out. >> > >> >> I'm completely puzzled. > > Found it. > > You replaced: > > - adr r0, 1f > - ldmia r0, {r3 - r5} > - sub r3, r0, r3 > - add r4, r4, r3 > - add r5, r5, r3 > + adr_l r4, __smpalt_begin > + adr_l r5, __smpalt_end > b __do_fixup_smp_on_up > > Notice that r3 is now uninitialized. > > Now have a look at the code for __do_fixup_smp_on_up. > I still don't see it :-) __do_fixup_smp_on_up() mentions r3 in the comment block, but it does not actually refer to it in the code, does it? -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > On 11 August 2017 at 20:58, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: > > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > > > >> On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: > >> > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: > >> >> Replace the open coded PC relative offset calculations with a pair > >> >> of adr_l invocations. > >> >> > >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > >> >> --- > >> >> arch/arm/kernel/head.S | 12 ++---------- > >> >> 1 file changed, 2 insertions(+), 10 deletions(-) > >> >> > >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > >> >> index 6e9df3663a57..aed341e0f530 100644 > >> >> --- a/arch/arm/kernel/head.S > >> >> +++ b/arch/arm/kernel/head.S > >> >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian > >> >> retne lr > >> >> > >> >> __fixup_smp_on_up: > >> >> - adr r0, 1f > >> >> - ldmia r0, {r3 - r5} > >> >> - sub r3, r0, r3 > >> >> - add r4, r4, r3 > >> >> - add r5, r5, r3 > >> >> + adr_l r4, __smpalt_begin > >> >> + adr_l r5, __smpalt_end > >> >> b __do_fixup_smp_on_up > >> >> ENDPROC(__fixup_smp) > >> >> > >> >> - .align > >> >> -1: .word . > >> >> - .word __smpalt_begin > >> >> - .word __smpalt_end > >> >> - > >> >> .pushsection .data > >> >> .globl smp_on_up > >> >> smp_on_up: > >> > > >> > Ard, it's this one that cause boot to fail on omap3. > >> > The rest of your set works for me with just this one > >> > left out. > >> > > >> > >> I'm completely puzzled. > > > > Found it. > > > > You replaced: > > > > - adr r0, 1f > > - ldmia r0, {r3 - r5} > > - sub r3, r0, r3 > > - add r4, r4, r3 > > - add r5, r5, r3 > > + adr_l r4, __smpalt_begin > > + adr_l r5, __smpalt_end > > b __do_fixup_smp_on_up > > > > Notice that r3 is now uninitialized. > > > > Now have a look at the code for __do_fixup_smp_on_up. > > > > I still don't see it :-) > > __do_fixup_smp_on_up() mentions r3 in the comment block, but it does > not actually refer to it in the code, does it? __do_fixup_smp_on_up: cmp r4, r5 reths lr ldmia r4!, {r0, r6} ARM( str r6, [r0, r3] ) <<============ THUMB( add r0, r0, r3 ) <<============ [...] Nicolas -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11 August 2017 at 21:06, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > >> On 11 August 2017 at 20:58, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: >> > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: >> > >> >> On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: >> >> > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: >> >> >> Replace the open coded PC relative offset calculations with a pair >> >> >> of adr_l invocations. >> >> >> >> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> >> >> --- >> >> >> arch/arm/kernel/head.S | 12 ++---------- >> >> >> 1 file changed, 2 insertions(+), 10 deletions(-) >> >> >> >> >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> >> >> index 6e9df3663a57..aed341e0f530 100644 >> >> >> --- a/arch/arm/kernel/head.S >> >> >> +++ b/arch/arm/kernel/head.S >> >> >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian >> >> >> retne lr >> >> >> >> >> >> __fixup_smp_on_up: >> >> >> - adr r0, 1f >> >> >> - ldmia r0, {r3 - r5} >> >> >> - sub r3, r0, r3 >> >> >> - add r4, r4, r3 >> >> >> - add r5, r5, r3 >> >> >> + adr_l r4, __smpalt_begin >> >> >> + adr_l r5, __smpalt_end >> >> >> b __do_fixup_smp_on_up >> >> >> ENDPROC(__fixup_smp) >> >> >> >> >> >> - .align >> >> >> -1: .word . >> >> >> - .word __smpalt_begin >> >> >> - .word __smpalt_end >> >> >> - >> >> >> .pushsection .data >> >> >> .globl smp_on_up >> >> >> smp_on_up: >> >> > >> >> > Ard, it's this one that cause boot to fail on omap3. >> >> > The rest of your set works for me with just this one >> >> > left out. >> >> > >> >> >> >> I'm completely puzzled. >> > >> > Found it. >> > >> > You replaced: >> > >> > - adr r0, 1f >> > - ldmia r0, {r3 - r5} >> > - sub r3, r0, r3 >> > - add r4, r4, r3 >> > - add r5, r5, r3 >> > + adr_l r4, __smpalt_begin >> > + adr_l r5, __smpalt_end >> > b __do_fixup_smp_on_up >> > >> > Notice that r3 is now uninitialized. >> > >> > Now have a look at the code for __do_fixup_smp_on_up. >> > >> >> I still don't see it :-) >> >> __do_fixup_smp_on_up() mentions r3 in the comment block, but it does >> not actually refer to it in the code, does it? > > __do_fixup_smp_on_up: > cmp r4, r5 > reths lr > ldmia r4!, {r0, r6} > ARM( str r6, [r0, r3] ) <<============ > THUMB( add r0, r0, r3 ) <<============ > [...] > Aahhh Looking at the wrong version of the file. Thanks for spotting that. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > On 11 August 2017 at 21:06, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: > > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > > > >> On 11 August 2017 at 20:58, Nicolas Pitre <nicolas.pitre@linaro.org> wrote: > >> > On Fri, 11 Aug 2017, Ard Biesheuvel wrote: > >> > > >> >> On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: > >> >> > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: > >> >> >> Replace the open coded PC relative offset calculations with a pair > >> >> >> of adr_l invocations. > >> >> >> > >> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > >> >> >> --- > >> >> >> arch/arm/kernel/head.S | 12 ++---------- > >> >> >> 1 file changed, 2 insertions(+), 10 deletions(-) > >> >> >> > >> >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > >> >> >> index 6e9df3663a57..aed341e0f530 100644 > >> >> >> --- a/arch/arm/kernel/head.S > >> >> >> +++ b/arch/arm/kernel/head.S > >> >> >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian > >> >> >> retne lr > >> >> >> > >> >> >> __fixup_smp_on_up: > >> >> >> - adr r0, 1f > >> >> >> - ldmia r0, {r3 - r5} > >> >> >> - sub r3, r0, r3 > >> >> >> - add r4, r4, r3 > >> >> >> - add r5, r5, r3 > >> >> >> + adr_l r4, __smpalt_begin > >> >> >> + adr_l r5, __smpalt_end > >> >> >> b __do_fixup_smp_on_up > >> >> >> ENDPROC(__fixup_smp) > >> >> >> > >> >> >> - .align > >> >> >> -1: .word . > >> >> >> - .word __smpalt_begin > >> >> >> - .word __smpalt_end > >> >> >> - > >> >> >> .pushsection .data > >> >> >> .globl smp_on_up > >> >> >> smp_on_up: > >> >> > > >> >> > Ard, it's this one that cause boot to fail on omap3. > >> >> > The rest of your set works for me with just this one > >> >> > left out. > >> >> > > >> >> > >> >> I'm completely puzzled. > >> > > >> > Found it. > >> > > >> > You replaced: > >> > > >> > - adr r0, 1f > >> > - ldmia r0, {r3 - r5} > >> > - sub r3, r0, r3 > >> > - add r4, r4, r3 > >> > - add r5, r5, r3 > >> > + adr_l r4, __smpalt_begin > >> > + adr_l r5, __smpalt_end > >> > b __do_fixup_smp_on_up > >> > > >> > Notice that r3 is now uninitialized. > >> > > >> > Now have a look at the code for __do_fixup_smp_on_up. > >> > > >> > >> I still don't see it :-) > >> > >> __do_fixup_smp_on_up() mentions r3 in the comment block, but it does > >> not actually refer to it in the code, does it? > > > > __do_fixup_smp_on_up: > > cmp r4, r5 > > reths lr > > ldmia r4!, {r0, r6} > > ARM( str r6, [r0, r3] ) <<============ > > THUMB( add r0, r0, r3 ) <<============ > > [...] > > > > Aahhh > > Looking at the wrong version of the file. > > Thanks for spotting that. No problem. Can't attribute that to my sharp eyes though. :-) Nicolas -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Ard Biesheuvel <ard.biesheuvel@linaro.org> [170811 12:37]: > On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: > > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: > >> Replace the open coded PC relative offset calculations with a pair > >> of adr_l invocations. > >> > >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > >> --- > >> arch/arm/kernel/head.S | 12 ++---------- > >> 1 file changed, 2 insertions(+), 10 deletions(-) > >> > >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > >> index 6e9df3663a57..aed341e0f530 100644 > >> --- a/arch/arm/kernel/head.S > >> +++ b/arch/arm/kernel/head.S > >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian > >> retne lr > >> > >> __fixup_smp_on_up: > >> - adr r0, 1f > >> - ldmia r0, {r3 - r5} > >> - sub r3, r0, r3 > >> - add r4, r4, r3 > >> - add r5, r5, r3 > >> + adr_l r4, __smpalt_begin > >> + adr_l r5, __smpalt_end > >> b __do_fixup_smp_on_up > >> ENDPROC(__fixup_smp) > >> > >> - .align > >> -1: .word . > >> - .word __smpalt_begin > >> - .word __smpalt_end > >> - > >> .pushsection .data > >> .globl smp_on_up > >> smp_on_up: > > > > Ard, it's this one that cause boot to fail on omap3. > > The rest of your set works for me with just this one > > left out. > > > > I'm completely puzzled. The change is so simple that it is difficult > to reduce it in parts, but if you still have the time to spare, mind > trying the diff below? > > > diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S > index 6e9df3663a57..c0361e608210 100644 > --- a/arch/arm/kernel/head.S > +++ b/arch/arm/kernel/head.S > @@ -524,17 +524,15 @@ ARM_BE8(rev r0, r0) @ > byteswap if big endian > > __fixup_smp_on_up: > adr r0, 1f > - ldmia r0, {r3 - r5} > - sub r3, r0, r3 > - add r4, r4, r3 > - add r5, r5, r3 > + ldmia r0, {r4 - r5} > + add r4, r4, r0 > + add r5, r5, r0 > b __do_fixup_smp_on_up > ENDPROC(__fixup_smp) > > .align > -1: .word . > - .word __smpalt_begin > - .word __smpalt_end > +1: .word __smpalt_begin - 1b > + .word __smpalt_end - 1b > > .pushsection .data > .globl smp_on_up > > The main point of these changes is to eliminate absolute references, > not to use the new macros, so if this does work, I will go with this > instead. For reference, I manually did this changes as it did not apply after reverting your earlier version of this patch. No luck with this change, so I'll test again when you you have updated patches available. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 14 August 2017 at 17:19, Tony Lindgren <tony@atomide.com> wrote: > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170811 12:37]: >> On 11 August 2017 at 16:13, Tony Lindgren <tony@atomide.com> wrote: >> > * Ard Biesheuvel <ard.biesheuvel@linaro.org> [170805 13:54]: >> >> Replace the open coded PC relative offset calculations with a pair >> >> of adr_l invocations. >> >> >> >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> >> --- >> >> arch/arm/kernel/head.S | 12 ++---------- >> >> 1 file changed, 2 insertions(+), 10 deletions(-) >> >> >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> >> index 6e9df3663a57..aed341e0f530 100644 >> >> --- a/arch/arm/kernel/head.S >> >> +++ b/arch/arm/kernel/head.S >> >> @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian >> >> retne lr >> >> >> >> __fixup_smp_on_up: >> >> - adr r0, 1f >> >> - ldmia r0, {r3 - r5} >> >> - sub r3, r0, r3 >> >> - add r4, r4, r3 >> >> - add r5, r5, r3 >> >> + adr_l r4, __smpalt_begin >> >> + adr_l r5, __smpalt_end >> >> b __do_fixup_smp_on_up >> >> ENDPROC(__fixup_smp) >> >> >> >> - .align >> >> -1: .word . >> >> - .word __smpalt_begin >> >> - .word __smpalt_end >> >> - >> >> .pushsection .data >> >> .globl smp_on_up >> >> smp_on_up: >> > >> > Ard, it's this one that cause boot to fail on omap3. >> > The rest of your set works for me with just this one >> > left out. >> > >> >> I'm completely puzzled. The change is so simple that it is difficult >> to reduce it in parts, but if you still have the time to spare, mind >> trying the diff below? >> >> >> diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> index 6e9df3663a57..c0361e608210 100644 >> --- a/arch/arm/kernel/head.S >> +++ b/arch/arm/kernel/head.S >> @@ -524,17 +524,15 @@ ARM_BE8(rev r0, r0) @ >> byteswap if big endian >> >> __fixup_smp_on_up: >> adr r0, 1f >> - ldmia r0, {r3 - r5} >> - sub r3, r0, r3 >> - add r4, r4, r3 >> - add r5, r5, r3 >> + ldmia r0, {r4 - r5} >> + add r4, r4, r0 >> + add r5, r5, r0 >> b __do_fixup_smp_on_up >> ENDPROC(__fixup_smp) >> >> .align >> -1: .word . >> - .word __smpalt_begin >> - .word __smpalt_end >> +1: .word __smpalt_begin - 1b >> + .word __smpalt_end - 1b >> >> .pushsection .data >> .globl smp_on_up >> >> The main point of these changes is to eliminate absolute references, >> not to use the new macros, so if this does work, I will go with this >> instead. > > For reference, I manually did this changes as it did not apply > after reverting your earlier version of this patch. No luck with > this change, so I'll test again when you you have updated patches > available. > Thanks Tony, But Nico already found the issue: I was looking at the code with another patch on top, which removed the reference to r3 in the followup code. In the KASLR series I just posted, I reordered that patch with this one, so everything should be good. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 6e9df3663a57..aed341e0f530 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -523,19 +523,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian retne lr __fixup_smp_on_up: - adr r0, 1f - ldmia r0, {r3 - r5} - sub r3, r0, r3 - add r4, r4, r3 - add r5, r5, r3 + adr_l r4, __smpalt_begin + adr_l r5, __smpalt_end b __do_fixup_smp_on_up ENDPROC(__fixup_smp) - .align -1: .word . - .word __smpalt_begin - .word __smpalt_end - .pushsection .data .globl smp_on_up smp_on_up:
Replace the open coded PC relative offset calculations with a pair of adr_l invocations. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- arch/arm/kernel/head.S | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html