diff mbox series

[2/4] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7

Message ID 20171010101606.15951-3-kishon@ti.com
State Superseded
Headers show
Series [1/4] dt-bindings: PCI: dra7xx: Add SoC specific compatible strings | expand

Commit Message

Kishon Vijay Abraham I Oct. 10, 2017, 10:16 a.m. UTC 
Add syscon properties required for configuring PCIe in x2 lane mode.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>

---
 Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.11.0

Comments

Rob Herring (Arm) Oct. 13, 2017, 9:45 p.m. UTC | #1 
On Tue, Oct 10, 2017 at 03:46:04PM +0530, Kishon Vijay Abraham I wrote:
> Add syscon properties required for configuring PCIe in x2 lane mode.

> 

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

> Signed-off-by: Sekhar Nori <nsekhar@ti.com>

> ---

>  Documentation/devicetree/bindings/pci/ti-pci.txt | 4 ++++

>  1 file changed, 4 insertions(+)

> 

> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt

> index 82cb875e4cec..455cb74a475c 100644

> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt

> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt

> @@ -13,6 +13,10 @@ PCIe DesignWare Controller

>   - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",

>  	       where <X> is the instance number of the pcie from the HW spec.

>   - num-lanes as specified in ../designware-pcie.txt

> + - syscon-lane-conf : phandle/offset pair. Phandle to the system control module and the

> +   register offset to specify 1 lane or 2 lane.

> + - syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the

> +   register offset to specify lane selection.


Needs vendor prefixes.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 82cb875e4cec..455cb74a475c 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -13,6 +13,10 @@  PCIe DesignWare Controller
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
  - num-lanes as specified in ../designware-pcie.txt
+ - syscon-lane-conf : phandle/offset pair. Phandle to the system control module and the
+   register offset to specify 1 lane or 2 lane.
+ - syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the
+   register offset to specify lane selection.
 
 HOST MODE
 =========