| Message ID | 1507890129-1543-1-git-send-email-yamada.masahiro@socionext.com |
|---|---|
| Headers | show |
| Series | ARM: uniphier: various refactoring for v2017.11-rc2 | expand |
2017-10-13 19:21 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > - Reactor of GPIO, clk, reset drivers. > - Clean up SOC code > - Sync DT > - Use more clock drivers > - Split U-Boot specific DT property > > > Masahiro Yamada (20): > ARM: uniphier: switch to CONFIG_ENV_IS_NOWHERE > gpio: uniphier: rework single device node model > ARM: dts: uniphier: update GPIO nodes > pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3 > pinctrl: uniphier: simplify input enable and delete pin arrays > ARM: uniphier: use pr_() instead of printf() where appropriate > usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h> > i2c: uniphier: replace debug() with dev_dbg() > i2c: uniphier-f: replace debug() with dev_dbg() > clk: uniphier: rework for better clock tree structure > clk: uniphier: add PXs3 clock data > clk: uniphier: add peripheral clock data > reset: uniphier: fix the first argument passed to dev_err() > i2c: uniphier: use clk for enable and get_rate > i2c: uniphier-f: use clk for enable and get_rate > ARM: uniphier: split u-boot,dm-pre-reloc out to > uniphier-v7-u-boot.dtsi > ARM: dts: uniphier: prepare to use clock for serial > serial: uniphier: use clk for enable and get_rate > ARM: dts: uniphier: sync DT with Linux 4.14-rc4 > ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTI > 1-11, 13, 20 applied to u-boot-uniphier. The others have been deferred because I found the SPL size exceeds the limit depending on compiler.
- Reactor of GPIO, clk, reset drivers. - Clean up SOC code - Sync DT - Use more clock drivers - Split U-Boot specific DT property Masahiro Yamada (20): ARM: uniphier: switch to CONFIG_ENV_IS_NOWHERE gpio: uniphier: rework single device node model ARM: dts: uniphier: update GPIO nodes pinctrl: uniphier: set PUPD_SIMPLE cap flag for PXs3 pinctrl: uniphier: simplify input enable and delete pin arrays ARM: uniphier: use pr_() instead of printf() where appropriate usb: dwc3-uniphier: replace <common.h> with <linux/bitops.h> i2c: uniphier: replace debug() with dev_dbg() i2c: uniphier-f: replace debug() with dev_dbg() clk: uniphier: rework for better clock tree structure clk: uniphier: add PXs3 clock data clk: uniphier: add peripheral clock data reset: uniphier: fix the first argument passed to dev_err() i2c: uniphier: use clk for enable and get_rate i2c: uniphier-f: use clk for enable and get_rate ARM: uniphier: split u-boot,dm-pre-reloc out to uniphier-v7-u-boot.dtsi ARM: dts: uniphier: prepare to use clock for serial serial: uniphier: use clk for enable and get_rate ARM: dts: uniphier: sync DT with Linux 4.14-rc4 ARM: uniphier: change the default of SoC select to UNIPHIER_V7_MULTI arch/arm/dts/uniphier-ld11.dtsi | 38 ++- arch/arm/dts/uniphier-ld20.dtsi | 97 ++++++- arch/arm/dts/uniphier-ld4-ref.dts | 9 +- arch/arm/dts/uniphier-ld4.dtsi | 122 +-------- arch/arm/dts/uniphier-ld6b-ref.dts | 9 +- arch/arm/dts/uniphier-pinctrl.dtsi | 15 ++ arch/arm/dts/uniphier-pro4-ace.dts | 9 - arch/arm/dts/uniphier-pro4-ref.dts | 9 - arch/arm/dts/uniphier-pro4-sanji.dts | 21 -- arch/arm/dts/uniphier-pro4.dtsi | 214 +--------------- arch/arm/dts/uniphier-pro5-4kbox.dts | 9 - arch/arm/dts/uniphier-pro5.dtsi | 214 +--------------- arch/arm/dts/uniphier-pxs2-gentil.dts | 21 -- arch/arm/dts/uniphier-pxs2-vodka.dts | 21 -- arch/arm/dts/uniphier-pxs2.dtsi | 256 ++++--------------- arch/arm/dts/uniphier-pxs3.dtsi | 7 +- arch/arm/dts/uniphier-sld8-ref.dts | 9 +- arch/arm/dts/uniphier-sld8.dtsi | 126 +--------- arch/arm/dts/uniphier-v7-u-boot.dtsi | 69 +++++ arch/arm/dts/uniphier-v8-u-boot.dtsi | 13 + arch/arm/mach-uniphier/Kconfig | 5 +- arch/arm/mach-uniphier/arm32/psci.c | 4 +- arch/arm/mach-uniphier/board_late_init.c | 4 +- arch/arm/mach-uniphier/boot-device/boot-device.c | 1 + arch/arm/mach-uniphier/cpu-info.c | 7 +- arch/arm/mach-uniphier/dram/cmd_ddrmphy.c | 4 +- arch/arm/mach-uniphier/dram/cmd_ddrphy.c | 4 +- arch/arm/mach-uniphier/dram/ddrphy-ld4.c | 5 +- arch/arm/mach-uniphier/dram/umc-pxs2.c | 18 +- arch/arm/mach-uniphier/dram_init.c | 7 +- drivers/clk/uniphier/Makefile | 2 + drivers/clk/uniphier/clk-uniphier-core.c | 308 +++++++++++++++++------ drivers/clk/uniphier/clk-uniphier-mio.c | 118 ++++----- drivers/clk/uniphier/clk-uniphier-peri.c | 113 +++++++++ drivers/clk/uniphier/clk-uniphier-sys.c | 52 ++-- drivers/clk/uniphier/clk-uniphier.h | 85 ++++--- drivers/gpio/gpio-uniphier.c | 140 +++++++---- drivers/i2c/i2c-uniphier-f.c | 131 +++++----- drivers/i2c/i2c-uniphier.c | 82 +++--- drivers/pinctrl/uniphier/pinctrl-uniphier-core.c | 17 +- drivers/pinctrl/uniphier/pinctrl-uniphier-ld4.c | 16 -- drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 5 - drivers/pinctrl/uniphier/pinctrl-uniphier-pro5.c | 15 -- drivers/pinctrl/uniphier/pinctrl-uniphier-pxs2.c | 9 - drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c | 3 +- drivers/pinctrl/uniphier/pinctrl-uniphier-sld8.c | 30 --- drivers/reset/reset-uniphier.c | 3 +- drivers/serial/serial_uniphier.c | 16 +- drivers/usb/dwc3/dwc3-uniphier.c | 2 +- env/Kconfig | 1 - 50 files changed, 1082 insertions(+), 1413 deletions(-) create mode 100644 arch/arm/dts/uniphier-v7-u-boot.dtsi create mode 100644 arch/arm/dts/uniphier-v8-u-boot.dtsi create mode 100644 drivers/clk/uniphier/clk-uniphier-peri.c