diff mbox series

[06/14] bus/fslmc: add braces for pointers in macros

Message ID 1512710487-32388-7-git-send-email-hemant.agrawal@nxp.com
State New
Headers show
Series DPAA2 PMD fixes and enhancements | expand

Commit Message

Hemant Agrawal Dec. 8, 2017, 5:21 a.m. UTC
From: Nipun Gupta <nipun.gupta@nxp.com>


Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

---
 drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 43 +++++++++++++++++----------------
 1 file changed, 22 insertions(+), 21 deletions(-)

-- 
2.7.4

Comments

Ferruh Yigit Dec. 12, 2017, 12:52 a.m. UTC | #1
On 12/7/2017 9:21 PM, Hemant Agrawal wrote:
> From: Nipun Gupta <nipun.gupta@nxp.com>

> 

> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>


Hi Hemant,

Since patch sent by you, I assume you ack the patch but for further patches, can
you please put explicit ack for the patches that author is not a maintainer?

Thanks,
ferruh
Hemant Agrawal Dec. 12, 2017, 5:22 a.m. UTC | #2
On 12/12/2017 6:22 AM, Ferruh Yigit wrote:
> On 12/7/2017 9:21 PM, Hemant Agrawal wrote:

>> From: Nipun Gupta <nipun.gupta@nxp.com>

>>

>> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>

>

> Hi Hemant,

>

> Since patch sent by you, I assume you ack the patch but for further patches, can

> you please put explicit ack for the patches that author is not a maintainer?

>

> Thanks,

> ferruh

>

Thanks. I will take care of it.
diff mbox series

Patch

diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index 7937293..a432b6f 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -199,56 +199,57 @@  enum qbman_fd_format {
 };
 /*Macros to define operations on FD*/
 #define DPAA2_SET_FD_ADDR(fd, addr) do {			\
-	fd->simple.addr_lo = lower_32_bits((uint64_t)(addr));	\
-	fd->simple.addr_hi = upper_32_bits((uint64_t)(addr));	\
+	(fd)->simple.addr_lo = lower_32_bits((uint64_t)(addr));	\
+	(fd)->simple.addr_hi = upper_32_bits((uint64_t)(addr));	\
 } while (0)
-#define DPAA2_SET_FD_LEN(fd, length)	(fd)->simple.len = length
+#define DPAA2_SET_FD_LEN(fd, length)	((fd)->simple.len = length)
 #define DPAA2_SET_FD_BPID(fd, bpid)	((fd)->simple.bpid_offset |= bpid)
-#define DPAA2_SET_FD_IVP(fd)   ((fd->simple.bpid_offset |= 0x00004000))
+#define DPAA2_SET_FD_IVP(fd)   (((fd)->simple.bpid_offset |= 0x00004000))
 #define DPAA2_SET_FD_OFFSET(fd, offset)	\
-	((fd->simple.bpid_offset |= (uint32_t)(offset) << 16))
-#define DPAA2_SET_FD_INTERNAL_JD(fd, len) fd->simple.frc = (0x80000000 | (len))
-#define DPAA2_SET_FD_FRC(fd, frc)	fd->simple.frc = frc
-#define DPAA2_RESET_FD_CTRL(fd)	(fd)->simple.ctrl = 0
+	(((fd)->simple.bpid_offset |= (uint32_t)(offset) << 16))
+#define DPAA2_SET_FD_INTERNAL_JD(fd, len) \
+	((fd)->simple.frc = (0x80000000 | (len)))
+#define DPAA2_SET_FD_FRC(fd, frc)	((fd)->simple.frc = frc)
+#define DPAA2_RESET_FD_CTRL(fd)	 ((fd)->simple.ctrl = 0)
 
 #define	DPAA2_SET_FD_ASAL(fd, asal)	((fd)->simple.ctrl |= (asal << 16))
 #define DPAA2_SET_FD_FLC(fd, addr)	do { \
-	fd->simple.flc_lo = lower_32_bits((uint64_t)(addr));	\
-	fd->simple.flc_hi = upper_32_bits((uint64_t)(addr));	\
+	(fd)->simple.flc_lo = lower_32_bits((uint64_t)(addr));	\
+	(fd)->simple.flc_hi = upper_32_bits((uint64_t)(addr));	\
 } while (0)
-#define DPAA2_SET_FLE_INTERNAL_JD(fle, len) (fle->frc = (0x80000000 | (len)))
+#define DPAA2_SET_FLE_INTERNAL_JD(fle, len) ((fle)->frc = (0x80000000 | (len)))
 #define DPAA2_GET_FLE_ADDR(fle)					\
-	(uint64_t)((((uint64_t)(fle->addr_hi)) << 32) + fle->addr_lo)
+	(uint64_t)((((uint64_t)((fle)->addr_hi)) << 32) + (fle)->addr_lo)
 #define DPAA2_SET_FLE_ADDR(fle, addr) do { \
-	fle->addr_lo = lower_32_bits((uint64_t)addr);     \
-	fle->addr_hi = upper_32_bits((uint64_t)addr);	  \
+	(fle)->addr_lo = lower_32_bits((uint64_t)addr);     \
+	(fle)->addr_hi = upper_32_bits((uint64_t)addr);	  \
 } while (0)
 #define DPAA2_GET_FLE_CTXT(fle)					\
 	(uint64_t)((((uint64_t)((fle)->reserved[1])) << 32) + \
 			(fle)->reserved[0])
 #define DPAA2_FLE_SAVE_CTXT(fle, addr) do { \
-	fle->reserved[0] = lower_32_bits((uint64_t)addr);     \
-	fle->reserved[1] = upper_32_bits((uint64_t)addr);	  \
+	(fle)->reserved[0] = lower_32_bits((uint64_t)addr);     \
+	(fle)->reserved[1] = upper_32_bits((uint64_t)addr);	  \
 } while (0)
 #define DPAA2_SET_FLE_OFFSET(fle, offset) \
 	((fle)->fin_bpid_offset |= (uint32_t)(offset) << 16)
 #define DPAA2_SET_FLE_BPID(fle, bpid) ((fle)->fin_bpid_offset |= (uint64_t)bpid)
 #define DPAA2_GET_FLE_BPID(fle) ((fle)->fin_bpid_offset & 0x000000ff)
-#define DPAA2_SET_FLE_FIN(fle)	(fle->fin_bpid_offset |= (uint64_t)1 << 31)
+#define DPAA2_SET_FLE_FIN(fle)	((fle)->fin_bpid_offset |= (uint64_t)1 << 31)
 #define DPAA2_SET_FLE_IVP(fle)   (((fle)->fin_bpid_offset |= 0x00004000))
 #define DPAA2_SET_FD_COMPOUND_FMT(fd)	\
-	(fd->simple.bpid_offset |= (uint32_t)1 << 28)
+	((fd)->simple.bpid_offset |= (uint32_t)1 << 28)
 #define DPAA2_GET_FD_ADDR(fd)	\
 ((uint64_t)((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo))
 
 #define DPAA2_GET_FD_LEN(fd)	((fd)->simple.len)
 #define DPAA2_GET_FD_BPID(fd)	(((fd)->simple.bpid_offset & 0x00003FFF))
-#define DPAA2_GET_FD_IVP(fd)   ((fd->simple.bpid_offset & 0x00004000) >> 14)
+#define DPAA2_GET_FD_IVP(fd)   (((fd)->simple.bpid_offset & 0x00004000) >> 14)
 #define DPAA2_GET_FD_OFFSET(fd)	(((fd)->simple.bpid_offset & 0x0FFF0000) >> 16)
 #define DPAA2_GET_FLE_OFFSET(fle) (((fle)->fin_bpid_offset & 0x0FFF0000) >> 16)
-#define DPAA2_SET_FLE_SG_EXT(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 29)
+#define DPAA2_SET_FLE_SG_EXT(fle) ((fle)->fin_bpid_offset |= (uint64_t)1 << 29)
 #define DPAA2_IS_SET_FLE_SG_EXT(fle)	\
-	((fle->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0)
+	(((fle)->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0)
 
 #define DPAA2_INLINE_MBUF_FROM_BUF(buf, meta_data_size) \
 	((struct rte_mbuf *)((uint64_t)(buf) - (meta_data_size)))