| Message ID | 1513837506-26543-2-git-send-email-zhang.chunyan@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add regulator suspend and resume support | expand |
On Thu, Dec 21, 2017 at 02:25:02PM +0800, Chunyan Zhang wrote: > Documented a few new added properties which are used for supporting > regulator suspend states. Your commit message should answer why you need this. What problem do you have that this solves? > > Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> > --- > Documentation/devicetree/bindings/regulator/regulator.txt | 11 +++++++++-- > 1 file changed, 9 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt > index 378f6dc..618a322 100644 > --- a/Documentation/devicetree/bindings/regulator/regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/regulator.txt > @@ -42,8 +42,15 @@ Optional properties: > - regulator-state-[mem/disk] node has following common properties: > - regulator-on-in-suspend: regulator should be on in suspend state. > - regulator-off-in-suspend: regulator should be off in suspend state. > - - regulator-suspend-microvolt: regulator should be set to this voltage > - in suspend. > + - regulator-suspend-min-microvolt: minimum voltage may be set in > + suspend state. > + - regulator-suspend-max-microvolt: maximum voltage may be set in > + suspend state. > + - regulator-suspend-microvolt: the default voltage which regulator > + should be set in suspend, this can be adjusted among > + <regulator-suspend-min-microvolt, regulator-suspend-max-microvolt> Perhaps this should stay a single property with: <target> <min> <max> Though why would you ever not try to set to the minimum voltage within the range of <min> to <max>? > + - regulator-changeable-in-suspend: whether the default voltage and > + the regulator on/off in suspend can be changed in runtime. > - regulator-mode: operating mode in the given suspend state. > The set of possible operating modes depends on the capabilities of > every hardware so the valid modes are documented on each regulator > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Rob, On 22 December 2017 at 07:26, Rob Herring <robh@kernel.org> wrote: > On Thu, Dec 21, 2017 at 02:25:02PM +0800, Chunyan Zhang wrote: >> Documented a few new added properties which are used for supporting >> regulator suspend states. > > Your commit message should answer why you need this. What problem do you > have that this solves? > >> >> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> >> --- >> Documentation/devicetree/bindings/regulator/regulator.txt | 11 +++++++++-- >> 1 file changed, 9 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt >> index 378f6dc..618a322 100644 >> --- a/Documentation/devicetree/bindings/regulator/regulator.txt >> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt >> @@ -42,8 +42,15 @@ Optional properties: >> - regulator-state-[mem/disk] node has following common properties: >> - regulator-on-in-suspend: regulator should be on in suspend state. >> - regulator-off-in-suspend: regulator should be off in suspend state. >> - - regulator-suspend-microvolt: regulator should be set to this voltage >> - in suspend. >> + - regulator-suspend-min-microvolt: minimum voltage may be set in >> + suspend state. >> + - regulator-suspend-max-microvolt: maximum voltage may be set in >> + suspend state. >> + - regulator-suspend-microvolt: the default voltage which regulator >> + should be set in suspend, this can be adjusted among >> + <regulator-suspend-min-microvolt, regulator-suspend-max-microvolt> > > Perhaps this should stay a single property with: <target> <min> <max> Do you mean that change the property name from "regulator-suspend-microvolt" to "regulator-suspend-target-microvolt"? "regulator-suspend-microvolt" is the one that some SoC is using. My intention was just to keep that configuration still working. > Though why would you ever not try to set to the minimum voltage within > the range of <min> to <max>? IIUC, you mean just removing "regulator-suspend-microvolt", and use "regulator-suspend-min-microvolt" as the default value for suspend voltage? I think that can work, but would it be better to not remove that right now, since some one is using that? Thanks for your review! Chunyan > >> + - regulator-changeable-in-suspend: whether the default voltage and >> + the regulator on/off in suspend can be changed in runtime. >> - regulator-mode: operating mode in the given suspend state. >> The set of possible operating modes depends on the capabilities of >> every hardware so the valid modes are documented on each regulator >> -- >> 2.7.4 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 378f6dc..618a322 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -42,8 +42,15 @@ Optional properties: - regulator-state-[mem/disk] node has following common properties: - regulator-on-in-suspend: regulator should be on in suspend state. - regulator-off-in-suspend: regulator should be off in suspend state. - - regulator-suspend-microvolt: regulator should be set to this voltage - in suspend. + - regulator-suspend-min-microvolt: minimum voltage may be set in + suspend state. + - regulator-suspend-max-microvolt: maximum voltage may be set in + suspend state. + - regulator-suspend-microvolt: the default voltage which regulator + should be set in suspend, this can be adjusted among + <regulator-suspend-min-microvolt, regulator-suspend-max-microvolt> + - regulator-changeable-in-suspend: whether the default voltage and + the regulator on/off in suspend can be changed in runtime. - regulator-mode: operating mode in the given suspend state. The set of possible operating modes depends on the capabilities of every hardware so the valid modes are documented on each regulator
Documented a few new added properties which are used for supporting regulator suspend states. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> --- Documentation/devicetree/bindings/regulator/regulator.txt | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html