| Message ID | 1511540697-27387-10-git-send-email-yamada.masahiro@socionext.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
On Sat, Nov 25, 2017 at 01:24:44AM +0900, Masahiro Yamada wrote: > To use a GPIO line for card detection, TMIO_MMC_USE_GPIO_CD is set > by a legacy board (arch/sh/boards/mach-ecovec24). > > For DT platforms, the "cd-gpios" property is a legitimate way for that > in case the IP-builtin card detection can not be used for some reason. > mmc_of_parse() calls mmc_gpiod_request_cd() to set up ctx->cd_gpio if > the "cd-gpios" property is specified. > > To cater to both cases, mmc_can_gpio_cd() is a correct way to check > which card detection logic is used. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> This patch is correct, yet needed some time for testing because it inverts the results for R-Car SoCs. Again, it is correct that it inverts it because those SoCs have GPIOs defined in their devicetrees, so they shouldn't be using native hotplug. Still, this meant checking that no regression gets introduced. Also, for R-Car Gen 2 & 3 native hotplug seems to work fine, so I was trying to find out why we use GPIOs here. I wasn't successful up to now, but since GPIOs work well, too, and seem to react a bit faster even, I am fine with the patch being merged. Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > Changes in v2: None > > drivers/mmc/host/tmio_mmc_core.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c > index efffb04..610f26f 100644 > --- a/drivers/mmc/host/tmio_mmc_core.c > +++ b/drivers/mmc/host/tmio_mmc_core.c > @@ -1232,7 +1232,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, > } > mmc->max_seg_size = mmc->max_req_size; > > - _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || > + _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || > mmc->caps & MMC_CAP_NEEDS_POLL || > !mmc_card_is_removable(mmc)); > > -- > 2.7.4 >
Hi Ulf, 2018-01-02 21:56 GMT+09:00 Wolfram Sang <wsa@the-dreams.de>: > On Sat, Nov 25, 2017 at 01:24:44AM +0900, Masahiro Yamada wrote: >> To use a GPIO line for card detection, TMIO_MMC_USE_GPIO_CD is set >> by a legacy board (arch/sh/boards/mach-ecovec24). >> >> For DT platforms, the "cd-gpios" property is a legitimate way for that >> in case the IP-builtin card detection can not be used for some reason. >> mmc_of_parse() calls mmc_gpiod_request_cd() to set up ctx->cd_gpio if >> the "cd-gpios" property is specified. >> >> To cater to both cases, mmc_can_gpio_cd() is a correct way to check >> which card detection logic is used. >> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > > This patch is correct, yet needed some time for testing because it > inverts the results for R-Car SoCs. Again, it is correct that it inverts > it because those SoCs have GPIOs defined in their devicetrees, so they > shouldn't be using native hotplug. Still, this meant checking that no > regression gets introduced. Also, for R-Car Gen 2 & 3 native hotplug > seems to work fine, so I was trying to find out why we use GPIOs here. I > wasn't successful up to now, but since GPIOs work well, too, and seem to > react a bit faster even, I am fine with the patch being merged. > > Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > >> --- >> >> Changes in v2: None >> >> drivers/mmc/host/tmio_mmc_core.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c >> index efffb04..610f26f 100644 >> --- a/drivers/mmc/host/tmio_mmc_core.c >> +++ b/drivers/mmc/host/tmio_mmc_core.c >> @@ -1232,7 +1232,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, >> } >> mmc->max_seg_size = mmc->max_req_size; >> >> - _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || >> + _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || >> mmc->caps & MMC_CAP_NEEDS_POLL || >> !mmc_card_is_removable(mmc)); >> >> -- >> 2.7.4 >> Wolfram issued Reviewed-by. Could you pick up this patch for -next? -- Best Regards Masahiro Yamada -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index efffb04..610f26f 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -1232,7 +1232,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, } mmc->max_seg_size = mmc->max_req_size; - _host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD || + _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || mmc->caps & MMC_CAP_NEEDS_POLL || !mmc_card_is_removable(mmc));
To use a GPIO line for card detection, TMIO_MMC_USE_GPIO_CD is set by a legacy board (arch/sh/boards/mach-ecovec24). For DT platforms, the "cd-gpios" property is a legitimate way for that in case the IP-builtin card detection can not be used for some reason. mmc_of_parse() calls mmc_gpiod_request_cd() to set up ctx->cd_gpio if the "cd-gpios" property is specified. To cater to both cases, mmc_can_gpio_cd() is a correct way to check which card detection logic is used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Changes in v2: None drivers/mmc/host/tmio_mmc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html