diff mbox series

[2/3] sunxi: add DM I2C support for H3/H5

Message ID 20180124100153.25044-2-nunojpg@gmail.com
State New
Headers show
Series [1/3] sunxi: remove allwinner prefix in pinctrl nodes | expand

Commit Message

Nuno Gonçalves Jan. 24, 2018, 10:01 a.m. UTC 
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
---
 arch/arm/dts/sun8i-h3.dtsi             | 48 ++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-sunxi/gpio.h |  2 ++
 board/sunxi/board.c                    | 10 ++++++-
 3 files changed, 59 insertions(+), 1 deletion(-)

Comments

Nuno Gonçalves Jan. 24, 2018, 11 a.m. UTC | #1 
On Wed, Jan 24, 2018 at 11:57 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Why don't you just synchronize the DT with Linux?

Didn't know that was the usual approach. But in Linux the files have a
different structure, for example there is sunxi-h3-h5.dtsi.

Thanks,
Nuno
Maxime Ripard Jan. 25, 2018, 8:29 a.m. UTC | #2 
On Wed, Jan 24, 2018 at 12:00:58PM +0100, Nuno Gonçalves wrote:
> On Wed, Jan 24, 2018 at 11:57 AM, Maxime Ripard

> <maxime.ripard@free-electrons.com> wrote:

> > Why don't you just synchronize the DT with Linux?

> 

> Didn't know that was the usual approach. But in Linux the files have a

> different structure, for example there is sunxi-h3-h5.dtsi.


Yes, but nothing prevents us to have the same one here.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
diff mbox series

Patch

diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index df2742095e..da17dfa579 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -396,6 +396,21 @@ 
 				drive-strength = <10>;
 				bias-disable;
 			};
+
+			i2c0_pins_a: i2c0@0 {
+				pins = "PA11", "PA12";
+				function = "i2c0";
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				pins = "PA18", "PA19";
+				function = "i2c1";
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				pins = "PE12", "PE13";
+				function = "i2c2";
+			};
 		};
 
 		timer@01c20c00 {
@@ -464,6 +479,39 @@ 
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		emac: ethernet@1c30000 {
 			compatible = "allwinner,sun8i-h3-emac";
 			reg = <0x01c30000 0x104>, <0x01c00030 0x4>;
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 24f85206c8..52884886d7 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -149,6 +149,8 @@  enum sunxi_gpio_number {
 #define SUN6I_GPA_SDC2		5
 #define SUN6I_GPA_SDC3		4
 #define SUN8I_H3_GPA_UART0	2
+#define SUN8I_H3_H5_GPA_TWI0	2
+#define SUN8I_H3_H5_GPA_TWI1	3
 
 #define SUN4I_GPB_PWM		2
 #define SUN4I_GPB_TWI0		2
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index dcacdf3e62..6b55aef202 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -93,6 +93,10 @@  void i2c_init_board(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
 	clock_twi_onoff(0, 1);
+#elif defined(CONFIG_MACH_SUNXI_H3_H5)
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(11), SUN8I_H3_H5_GPA_TWI0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(12), SUN8I_H3_H5_GPA_TWI0);
+	clock_twi_onoff(0, 1);
 #elif defined(CONFIG_MACH_SUN8I)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
@@ -115,6 +119,10 @@  void i2c_init_board(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
 	clock_twi_onoff(1, 1);
+#elif defined(CONFIG_MACH_SUNXI_H3_H5)
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(18), SUN8I_H3_H5_GPA_TWI1);
+	sunxi_gpio_set_cfgpin(SUNXI_GPA(19), SUN8I_H3_H5_GPA_TWI1);
+	clock_twi_onoff(1, 1);
 #elif defined(CONFIG_MACH_SUN8I)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
@@ -137,7 +145,7 @@  void i2c_init_board(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
 	clock_twi_onoff(2, 1);
-#elif defined(CONFIG_MACH_SUN8I)
+#elif defined(CONFIG_MACH_SUN8I) /* same for CONFIG_MACH_SUNXI_H3_H5 */
 	sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
 	sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
 	clock_twi_onoff(2, 1);