diff mbox series

[ARM/FDPIC,3/4] linux-user: ARM-FDPIC: Add support for signals for FDPIC targets

Message ID 20180406151752.10854-4-christophe.lyon@st.com
State New
Headers show
Series FDPIC ABI for ARM | expand

Commit Message

Christophe Lyon April 6, 2018, 3:17 p.m. UTC
The FDPIC restorer needs to deal with a function descriptor, hence we
have to extend 'retcode' such that it can hold the instructions needed
to perform this.

The restorer sequence uses the same thumbness as the exception
handler (mainly to support Thumb-only architectures).

Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>


-- 
2.6.3

Comments

Peter Maydell April 13, 2018, 3:14 p.m. UTC | #1
On 6 April 2018 at 16:17, Christophe Lyon <christophe.lyon@st.com> wrote:
> The FDPIC restorer needs to deal with a function descriptor, hence we

> have to extend 'retcode' such that it can hold the instructions needed

> to perform this.

>

> The restorer sequence uses the same thumbness as the exception

> handler (mainly to support Thumb-only architectures).

>

> Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>

> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>


> +#if defined(CONFIG_USE_FDPIC)

> +/*

> + * Stub needed to make sure the FD register (r9) contains the right

> + * value.

> + */

> +static const unsigned long sigreturn_fdpic_codes[3] = {

> +    0xe59fc004, /* ldr r12, [pc, #4] to read function descriptor */

> +    0xe59c9004, /* ldr r9, [r12, #4] to setup GOT */

> +    0xe59cf000  /* ldr pc, [r12] to jump into restorer */

> +};

> +

> +static const unsigned long sigreturn_fdpic_thumb_codes[3] = {

> +    0xc008f8df, /* ldr r12, [pc, #8] to read function descriptor */

> +    0x9004f8dc, /* ldr r9, [r12, #4] to setup GOT */

> +    0xf000f8dc  /* ldr pc, [r12] to jump into restorer */

> +};

> +#endif

>

>  static inline int valid_user_regs(CPUARMState *regs)

>  {

> @@ -2143,7 +2160,19 @@ setup_return(CPUARMState *env, struct target_sigaction *ka,

>  {

>      abi_ulong handler = ka->_sa_handler;

>      abi_ulong retcode;

> +

> +#ifdef CONFIG_USE_FDPIC

> +    int thumb;

> +

> +    if (env->is_fdpic) {

> +        thumb = (((abi_ulong *)g2h(ka->_sa_handler))[0]) & 1;

> +    } else {

> +        thumb = handler & 1;

> +    }


Dereferencing a pointer obtained by a raw g2h() is very likely
wrong. You want either to use one of the get_user_*() macros, or
a lock_user/__get_user/unlock_user sequence, so that you can
detect whether the guest actually has read access to the address,
and correctly handle the case where it does not.

thanks
-- PMM
diff mbox series

Patch

diff --git a/linux-user/signal.c b/linux-user/signal.c
index 2ea3e03..75643d7 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -2039,13 +2039,13 @@  struct sigframe_v1
 {
     struct target_sigcontext sc;
     abi_ulong extramask[TARGET_NSIG_WORDS-1];
-    abi_ulong retcode;
+    abi_ulong retcode[4];
 };
 
 struct sigframe_v2
 {
     struct target_ucontext_v2 uc;
-    abi_ulong retcode;
+    abi_ulong retcode[4];
 };
 
 struct rt_sigframe_v1
@@ -2054,14 +2054,14 @@  struct rt_sigframe_v1
     abi_ulong puc;
     struct target_siginfo info;
     struct target_ucontext_v1 uc;
-    abi_ulong retcode;
+    abi_ulong retcode[4];
 };
 
 struct rt_sigframe_v2
 {
     struct target_siginfo info;
     struct target_ucontext_v2 uc;
-    abi_ulong retcode;
+    abi_ulong retcode[4];
 };
 
 #define TARGET_CONFIG_CPU_32 1
@@ -2084,6 +2084,23 @@  static const abi_ulong retcodes[4] = {
 	SWI_SYS_RT_SIGRETURN,	SWI_THUMB_RT_SIGRETURN
 };
 
+#if defined(CONFIG_USE_FDPIC)
+/*
+ * Stub needed to make sure the FD register (r9) contains the right
+ * value.
+ */
+static const unsigned long sigreturn_fdpic_codes[3] = {
+    0xe59fc004, /* ldr r12, [pc, #4] to read function descriptor */
+    0xe59c9004, /* ldr r9, [r12, #4] to setup GOT */
+    0xe59cf000  /* ldr pc, [r12] to jump into restorer */
+};
+
+static const unsigned long sigreturn_fdpic_thumb_codes[3] = {
+    0xc008f8df, /* ldr r12, [pc, #8] to read function descriptor */
+    0x9004f8dc, /* ldr r9, [r12, #4] to setup GOT */
+    0xf000f8dc  /* ldr pc, [r12] to jump into restorer */
+};
+#endif
 
 static inline int valid_user_regs(CPUARMState *regs)
 {
@@ -2143,7 +2160,19 @@  setup_return(CPUARMState *env, struct target_sigaction *ka,
 {
     abi_ulong handler = ka->_sa_handler;
     abi_ulong retcode;
+
+#ifdef CONFIG_USE_FDPIC
+    int thumb;
+
+    if (env->is_fdpic) {
+        thumb = (((abi_ulong *)g2h(ka->_sa_handler))[0]) & 1;
+    } else {
+        thumb = handler & 1;
+    }
+#else
     int thumb = handler & 1;
+#endif
+
     uint32_t cpsr = cpsr_read(env);
 
     cpsr &= ~CPSR_IT;
@@ -2154,8 +2183,37 @@  setup_return(CPUARMState *env, struct target_sigaction *ka,
     }
 
     if (ka->sa_flags & TARGET_SA_RESTORER) {
+#ifdef CONFIG_USE_FDPIC
+        if (env->is_fdpic) {
+            /* For FDPIC we ensure that the restorer is called with a
+             * correct r9 value.  For that we need to write code on
+             * the stack that sets r9 and jumps back to restorer
+             * value.
+             */
+            if (thumb) {
+                __put_user(sigreturn_fdpic_thumb_codes[0], rc);
+                __put_user(sigreturn_fdpic_thumb_codes[1], rc + 1);
+                __put_user(sigreturn_fdpic_thumb_codes[2], rc + 2);
+                __put_user((abi_ulong)ka->sa_restorer, rc + 3);
+            } else {
+                __put_user(sigreturn_fdpic_codes[0], rc);
+                __put_user(sigreturn_fdpic_codes[1], rc + 1);
+                __put_user(sigreturn_fdpic_codes[2], rc + 2);
+                __put_user((abi_ulong)ka->sa_restorer, rc + 3);
+            }
+
+            retcode = rc_addr + thumb;
+        } else
+#endif
         retcode = ka->sa_restorer;
     } else {
+#ifdef CONFIG_USE_FDPIC
+        if (env->is_fdpic) {
+            qemu_log_mask(LOG_UNIMP,
+                          "arm: FDPIC signal return not implemented");
+            abort();
+        } else {
+#endif
         unsigned int idx = thumb;
 
         if (ka->sa_flags & TARGET_SA_SIGINFO) {
@@ -2165,12 +2223,29 @@  setup_return(CPUARMState *env, struct target_sigaction *ka,
         __put_user(retcodes[idx], rc);
 
         retcode = rc_addr + thumb;
+#ifdef CONFIG_USE_FDPIC
+        }
+#endif
     }
 
     env->regs[0] = usig;
+#ifdef CONFIG_USE_FDPIC
+    if (env->is_fdpic) {
+        env->regs[9] = ((abi_ulong *)g2h(ka->_sa_handler))[1];
+    }
+#endif
     env->regs[13] = frame_addr;
     env->regs[14] = retcode;
+#ifdef CONFIG_USE_FDPIC
+    if (env->is_fdpic) {
+        env->regs[15] = ((abi_ulong *)g2h(ka->_sa_handler))[0]
+            & (thumb ? ~1 : ~3);
+    } else {
+        env->regs[15] = handler & (thumb ? ~1 : ~3);
+    }
+#else
     env->regs[15] = handler & (thumb ? ~1 : ~3);
+#endif
     cpsr_write(env, cpsr, CPSR_IT | CPSR_T, CPSRWriteByInstr);
 }
 
@@ -2264,7 +2339,7 @@  static void setup_frame_v1(int usig, struct target_sigaction *ka,
         __put_user(set->sig[i], &frame->extramask[i - 1]);
     }
 
-    setup_return(regs, ka, &frame->retcode, frame_addr, usig,
+    setup_return(regs, ka, frame->retcode, frame_addr, usig,
                  frame_addr + offsetof(struct sigframe_v1, retcode));
 
     unlock_user_struct(frame, frame_addr, 1);
@@ -2286,7 +2361,7 @@  static void setup_frame_v2(int usig, struct target_sigaction *ka,
 
     setup_sigframe_v2(&frame->uc, set, regs);
 
-    setup_return(regs, ka, &frame->retcode, frame_addr, usig,
+    setup_return(regs, ka, frame->retcode, frame_addr, usig,
                  frame_addr + offsetof(struct sigframe_v2, retcode));
 
     unlock_user_struct(frame, frame_addr, 1);
@@ -2341,7 +2416,7 @@  static void setup_rt_frame_v1(int usig, struct target_sigaction *ka,
         __put_user(set->sig[i], &frame->uc.tuc_sigmask.sig[i]);
     }
 
-    setup_return(env, ka, &frame->retcode, frame_addr, usig,
+    setup_return(env, ka, frame->retcode, frame_addr, usig,
                  frame_addr + offsetof(struct rt_sigframe_v1, retcode));
 
     env->regs[1] = info_addr;
@@ -2372,7 +2447,7 @@  static void setup_rt_frame_v2(int usig, struct target_sigaction *ka,
 
     setup_sigframe_v2(&frame->uc, set, env);
 
-    setup_return(env, ka, &frame->retcode, frame_addr, usig,
+    setup_return(env, ka, frame->retcode, frame_addr, usig,
                  frame_addr + offsetof(struct rt_sigframe_v2, retcode));
 
     env->regs[1] = info_addr;