diff mbox series

[03/19,v3] regulator: arizona-ldo1: Look up a descriptor and pass to the core

Message ID 20180514080640.12515-4-linus.walleij@linaro.org
State Accepted
Commit e1739e86f0cb9c48e8745a610e6981a4e24cadad
Headers show
Series Refactor fixed and GPIO regulators | expand

Commit Message

Linus Walleij May 14, 2018, 8:06 a.m. UTC
Instead of passing a global GPIO number, pass a descriptor looked
up with the standard devm_gpiod_get_optional() call.

We have augmented the GPIO core to look up the regulator special
GPIO "wlf,ldoena" in commit 6a537d48461d
"gpio: of: Support regulator nonstandard GPIO properties".

Cc: patches@opensource.cirrus.com
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v2->v3:
- Fix "wlf,ldo1ena" to "wlf,ldoena" on WM5102 non-reva
ChangeLog v1->v2:
- Rebase the patch on the other changes.
- Make sure to update some s3c64xx platform data properly.
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c | 28 +++++++++++++++-----
 drivers/regulator/arizona-ldo1.c             | 19 +++++--------
 include/linux/regulator/arizona-ldo1.h       |  3 ---
 3 files changed, 28 insertions(+), 22 deletions(-)

-- 
2.17.0

Comments

Charles Keepax May 15, 2018, 11:53 a.m. UTC | #1
On Mon, May 14, 2018 at 10:06:24AM +0200, Linus Walleij wrote:
> Instead of passing a global GPIO number, pass a descriptor looked

> up with the standard devm_gpiod_get_optional() call.

> 

> We have augmented the GPIO core to look up the regulator special

> GPIO "wlf,ldoena" in commit 6a537d48461d

> "gpio: of: Support regulator nonstandard GPIO properties".

> 

> Cc: patches@opensource.cirrus.com

> Cc: Richard Fitzgerald <rf@opensource.cirrus.com>

> Cc: Charles Keepax <ckeepax@opensource.cirrus.com>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---


Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>


Thanks,
Charles
diff mbox series

Patch

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index f00988705408..5aa472892465 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -9,6 +9,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
 
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
@@ -206,9 +207,6 @@  static const struct i2c_board_info wm1277_devs[] = {
 };
 
 static struct arizona_pdata wm5102_reva_pdata = {
-	.ldo1 = {
-		.ldoena = S3C64XX_GPN(7),
-	},
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
@@ -237,10 +235,16 @@  static struct spi_board_info wm5102_reva_spi_devs[] = {
 	},
 };
 
-static struct arizona_pdata wm5102_pdata = {
-	.ldo1 = {
-		.ldoena = S3C64XX_GPN(7),
+static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldoena", GPIO_ACTIVE_HIGH),
+		{ },
 	},
+};
+
+static struct arizona_pdata wm5102_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 2,
@@ -264,6 +268,15 @@  static struct spi_board_info wm5102_spi_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5102_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct spi_board_info wm5110_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5110",
@@ -366,6 +379,9 @@  static int wlf_gf_module_probe(struct i2c_client *i2c,
 					    rev == gf_mods[i].rev))
 			break;
 
+	gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
+	gpiod_add_lookup_table(&wm5102_gpiod_table);
+
 	if (i < ARRAY_SIZE(gf_mods)) {
 		dev_info(&i2c->dev, "%s revision %d\n",
 			 gf_mods[i].name, rev + 1);
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 96fddfff5dc4..f6d6a4ad9e8a 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -17,12 +17,11 @@ 
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/gpio.h>
 #include <linux/slab.h>
 
 #include <linux/regulator/arizona-ldo1.h>
@@ -198,16 +197,6 @@  static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
 	struct device_node *init_node, *dcvdd_node;
 	struct regulator_init_data *init_data;
 
-	pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
-	if (pdata->ldoena < 0) {
-		dev_warn(config->dev,
-			 "LDOENA GPIO property missing/malformed: %d\n",
-			 pdata->ldoena);
-		pdata->ldoena = 0;
-	} else {
-		config->ena_gpio_initialized = true;
-	}
-
 	init_node = of_get_child_by_name(np, "ldo1");
 	dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0);
 
@@ -264,7 +253,11 @@  static int arizona_ldo1_common_init(struct platform_device *pdev,
 		}
 	}
 
-	config.ena_gpio = pdata->ldoena;
+	/* We assume that high output = regulator off */
+	config.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "wlf,ldoena",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(config.ena_gpiod))
+		return PTR_ERR(config.ena_gpiod);
 
 	if (pdata->init_data)
 		config.init_data = pdata->init_data;
diff --git a/include/linux/regulator/arizona-ldo1.h b/include/linux/regulator/arizona-ldo1.h
index c685f1277c63..fe74ab9990e6 100644
--- a/include/linux/regulator/arizona-ldo1.h
+++ b/include/linux/regulator/arizona-ldo1.h
@@ -14,9 +14,6 @@ 
 struct regulator_init_data;
 
 struct arizona_ldo1_pdata {
-	/** GPIO controlling LDOENA, if any */
-	int ldoena;
-
 	/** Regulator configuration for LDO1 */
 	const struct regulator_init_data *init_data;
 };