diff mbox series

[V3,2/7] mmc: sdhci: made changes for System Address register of SDMA

Message ID 1531106398-14062-3-git-send-email-zhang.chunyan@linaro.org
State New
Headers show
Series [V3,1/7] mmc: sdhci: add sd host v4 mode | expand

Commit Message

Chunyan Zhang July 9, 2018, 3:19 a.m. UTC 
According to the SD host controller specification version 4.10, when
Host Version 4 is enabled, SDMA uses ADMA System Address register
(05Fh-058h) instead of using SDMA System Address register to
support both 32-bit and 64-bit addressing.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

---
 drivers/mmc/host/sdhci.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Adrian Hunter July 16, 2018, 1:03 p.m. UTC | #1 
On 09/07/18 06:19, Chunyan Zhang wrote:
> According to the SD host controller specification version 4.10, when

> Host Version 4 is enabled, SDMA uses ADMA System Address register

> (05Fh-058h) instead of using SDMA System Address register to

> support both 32-bit and 64-bit addressing.


The commit message is good but the subject is not so good.  What about
"Change SDMA address register for V4 mode"

> 

> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

> ---

>  drivers/mmc/host/sdhci.c | 25 ++++++++++++++++++-------

>  1 file changed, 18 insertions(+), 7 deletions(-)

> 

> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c

> index 525862f..c7de6a5 100644

> --- a/drivers/mmc/host/sdhci.c

> +++ b/drivers/mmc/host/sdhci.c

> @@ -701,7 +701,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,

>  	}

>  }

>  

> -static u32 sdhci_sdma_address(struct sdhci_host *host)

> +static dma_addr_t sdhci_sdma_address(struct sdhci_host *host)

>  {

>  	if (host->bounce_buffer)

>  		return host->bounce_addr;

> @@ -709,6 +709,18 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)

>  		return sg_dma_address(host->data->sg);

>  }

>  

> +static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)

> +{

> +	if (host->v4_mode) {

> +		sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);

> +		if (host->flags & SDHCI_USE_64_BIT_DMA)

> +			sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA_ADDRESS_HI);

> +	} else {

> +		sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);

> +	}

> +

> +}

> +

>  static unsigned int sdhci_target_timeout(struct sdhci_host *host,

>  					 struct mmc_command *cmd,

>  					 struct mmc_data *data)

> @@ -968,8 +980,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)

>  					     SDHCI_ADMA_ADDRESS_HI);

>  		} else {

>  			WARN_ON(sg_cnt != 1);

> -			sdhci_writel(host, sdhci_sdma_address(host),

> -				     SDHCI_DMA_ADDRESS);

> +			sdhci_set_sdma_addr(host, sdhci_sdma_address(host));

>  		}

>  	}

>  

> @@ -2796,7 +2807,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)

>  		 * some controllers are faulty, don't trust them.

>  		 */

>  		if (intmask & SDHCI_INT_DMA_END) {

> -			u32 dmastart, dmanow;

> +			dma_addr_t dmastart, dmanow;

>  

>  			dmastart = sdhci_sdma_address(host);

>  			dmanow = dmastart + host->data->bytes_xfered;

> @@ -2807,9 +2818,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)

>  				~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +


That isn't going to work with 64-bit addresses.  Need to cast
SDHCI_DEFAULT_BOUNDARY_SIZE to dma_addr_t

>  				SDHCI_DEFAULT_BOUNDARY_SIZE;

>  			host->data->bytes_xfered = dmanow - dmastart;

> -			DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",

> -			    dmastart, host->data->bytes_xfered, dmanow);

> -			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);

> +			DBG("DMA base 0x%016llx, transferred 0x%06x bytes, next 0x%016llx\n",


Can you use %pad for dma_addr_t

> +			    (u64)dmastart, host->data->bytes_xfered, (u64)dmanow);

> +			sdhci_set_sdma_addr(host, dmanow);

>  		}

>  

>  		if (intmask & SDHCI_INT_DATA_END) {

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Adrian Hunter July 16, 2018, 1:23 p.m. UTC | #2 
On 16/07/18 16:03, Adrian Hunter wrote:
> On 09/07/18 06:19, Chunyan Zhang wrote:

>> According to the SD host controller specification version 4.10, when

>> Host Version 4 is enabled, SDMA uses ADMA System Address register

>> (05Fh-058h) instead of using SDMA System Address register to

>> support both 32-bit and 64-bit addressing.

> 

> The commit message is good but the subject is not so good.  What about

> "Change SDMA address register for V4 mode"

> 

>>

>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>

>> ---

>>  drivers/mmc/host/sdhci.c | 25 ++++++++++++++++++-------

>>  1 file changed, 18 insertions(+), 7 deletions(-)

>>

>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c

>> index 525862f..c7de6a5 100644

>> --- a/drivers/mmc/host/sdhci.c

>> +++ b/drivers/mmc/host/sdhci.c

>> @@ -701,7 +701,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,

>>  	}

>>  }

>>  

>> -static u32 sdhci_sdma_address(struct sdhci_host *host)

>> +static dma_addr_t sdhci_sdma_address(struct sdhci_host *host)

>>  {

>>  	if (host->bounce_buffer)

>>  		return host->bounce_addr;

>> @@ -709,6 +709,18 @@ static u32 sdhci_sdma_address(struct sdhci_host *host)

>>  		return sg_dma_address(host->data->sg);

>>  }

>>  

>> +static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)

>> +{

>> +	if (host->v4_mode) {

>> +		sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);

>> +		if (host->flags & SDHCI_USE_64_BIT_DMA)

>> +			sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA_ADDRESS_HI);


Also need to adjust the initialization in sdhci_setup_host() which prevents
SDMA with 64-bit DMA i.e.

	/* SDMA does not support 64-bit DMA */
	if (host->flags & SDHCI_USE_64_BIT_DMA)
		host->flags &= ~SDHCI_USE_SDMA;


>> +	} else {

>> +		sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);

>> +	}

>> +

>> +}

>> +

>>  static unsigned int sdhci_target_timeout(struct sdhci_host *host,

>>  					 struct mmc_command *cmd,

>>  					 struct mmc_data *data)

>> @@ -968,8 +980,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)

>>  					     SDHCI_ADMA_ADDRESS_HI);

>>  		} else {

>>  			WARN_ON(sg_cnt != 1);

>> -			sdhci_writel(host, sdhci_sdma_address(host),

>> -				     SDHCI_DMA_ADDRESS);

>> +			sdhci_set_sdma_addr(host, sdhci_sdma_address(host));

>>  		}

>>  	}

>>  

>> @@ -2796,7 +2807,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)

>>  		 * some controllers are faulty, don't trust them.

>>  		 */

>>  		if (intmask & SDHCI_INT_DMA_END) {

>> -			u32 dmastart, dmanow;

>> +			dma_addr_t dmastart, dmanow;

>>  

>>  			dmastart = sdhci_sdma_address(host);

>>  			dmanow = dmastart + host->data->bytes_xfered;

>> @@ -2807,9 +2818,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)

>>  				~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +

> 

> That isn't going to work with 64-bit addresses.  Need to cast

> SDHCI_DEFAULT_BOUNDARY_SIZE to dma_addr_t

> 

>>  				SDHCI_DEFAULT_BOUNDARY_SIZE;

>>  			host->data->bytes_xfered = dmanow - dmastart;

>> -			DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",

>> -			    dmastart, host->data->bytes_xfered, dmanow);

>> -			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);

>> +			DBG("DMA base 0x%016llx, transferred 0x%06x bytes, next 0x%016llx\n",

> 

> Can you use %pad for dma_addr_t

> 

>> +			    (u64)dmastart, host->data->bytes_xfered, (u64)dmanow);

>> +			sdhci_set_sdma_addr(host, dmanow);

>>  		}

>>  

>>  		if (intmask & SDHCI_INT_DATA_END) {

>>

> 

> 


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 525862f..c7de6a5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -701,7 +701,7 @@  static void sdhci_adma_table_post(struct sdhci_host *host,
 	}
 }
 
-static u32 sdhci_sdma_address(struct sdhci_host *host)
+static dma_addr_t sdhci_sdma_address(struct sdhci_host *host)
 {
 	if (host->bounce_buffer)
 		return host->bounce_addr;
@@ -709,6 +709,18 @@  static u32 sdhci_sdma_address(struct sdhci_host *host)
 		return sg_dma_address(host->data->sg);
 }
 
+static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)
+{
+	if (host->v4_mode) {
+		sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);
+		if (host->flags & SDHCI_USE_64_BIT_DMA)
+			sdhci_writel(host, (u64)addr >> 32, SDHCI_ADMA_ADDRESS_HI);
+	} else {
+		sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);
+	}
+
+}
+
 static unsigned int sdhci_target_timeout(struct sdhci_host *host,
 					 struct mmc_command *cmd,
 					 struct mmc_data *data)
@@ -968,8 +980,7 @@  static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 					     SDHCI_ADMA_ADDRESS_HI);
 		} else {
 			WARN_ON(sg_cnt != 1);
-			sdhci_writel(host, sdhci_sdma_address(host),
-				     SDHCI_DMA_ADDRESS);
+			sdhci_set_sdma_addr(host, sdhci_sdma_address(host));
 		}
 	}
 
@@ -2796,7 +2807,7 @@  static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 		 * some controllers are faulty, don't trust them.
 		 */
 		if (intmask & SDHCI_INT_DMA_END) {
-			u32 dmastart, dmanow;
+			dma_addr_t dmastart, dmanow;
 
 			dmastart = sdhci_sdma_address(host);
 			dmanow = dmastart + host->data->bytes_xfered;
@@ -2807,9 +2818,9 @@  static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
 				~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
 				SDHCI_DEFAULT_BOUNDARY_SIZE;
 			host->data->bytes_xfered = dmanow - dmastart;
-			DBG("DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
-			    dmastart, host->data->bytes_xfered, dmanow);
-			sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
+			DBG("DMA base 0x%016llx, transferred 0x%06x bytes, next 0x%016llx\n",
+			    (u64)dmastart, host->data->bytes_xfered, (u64)dmanow);
+			sdhci_set_sdma_addr(host, dmanow);
 		}
 
 		if (intmask & SDHCI_INT_DATA_END) {