| Message ID | 20180509120135.25940-1-niklas.cassel@linaro.org |
|---|---|
| State | Accepted |
| Commit | 90ce62659994b87723ec6ba26815f9634c18e449 |
| Headers | show |
| Series | ARM: dts: qcom-apq8064: use correct pci address for address translation | expand |
On Mon, Sep 17, 2018 at 12:21:49PM +0100, Lorenzo Pieralisi wrote: > On Wed, May 09, 2018 at 02:01:34PM +0200, Niklas Cassel wrote: > > For PCI, the second and third cell in ranges specifies the upper and > > lower target address for address translation. This target address will > > be used to program the internal address translation unit (iATU). > > > > The current device tree configuration will program the iATU to translate > > CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM). > > The device tree configuration also specifies that CPU acesses to > > 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O). > > > > We cannot have both I/O space and memory space at PCI address 0x0. > > > > The PCI code already uses the CPU address when assigning addresses to > > memory BARs, so for memory space the PCI address should be the same as > > the CPU address. This also matches how all other device trees using > > snps,dw-pcie are configured. > > > > The existing configuration appears to work, even if it is incorrect. > > For some reason the iATU doesn't obey the existing configuration, > > and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0. > > > > The reason why the existing configuration works at all is probably > > because the default behavior, when there is no match, is to use the > > untranslated address. This happens to work for memory space, since > > it's a 1:1 mapping. However, instead of relying on this behavior, > > let's configure the iATU correctly. > > > > Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> > > --- > > arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > Hi Niklas, > > what's this patch status ? Please let me know if I have to keep > it in the PCI tree queue, I think, if ACKed, it should probably > go via the arm-soc tree. Hello Lorenzo, This patch has been merged and is included in v4.18. I CC:ed PCI just to get more eyes on it. Kind regards, Niklas > > Thanks, > Lorenzo > > > diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi > > index 5341a39c0392..148cf7e565f6 100644 > > --- a/arch/arm/boot/dts/qcom-apq8064.dtsi > > +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi > > @@ -1417,7 +1417,7 @@ > > #address-cells = <3>; > > #size-cells = <2>; > > ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ > > - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ > > + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */ > > interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; > > interrupt-names = "msi"; > > #interrupt-cells = <1>; > > -- > > 2.17.0 > >
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 5341a39c0392..148cf7e565f6 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1417,7 +1417,7 @@ #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ - 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */ interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; interrupt-names = "msi"; #interrupt-cells = <1>;
For PCI, the second and third cell in ranges specifies the upper and lower target address for address translation. This target address will be used to program the internal address translation unit (iATU). The current device tree configuration will program the iATU to translate CPU accesses to 0x08000000 to PCI address 0x0 (with TLP type MEM). The device tree configuration also specifies that CPU acesses to 0x0fe00000 will be translated to PCI address 0x0 (with TLP type I/O). We cannot have both I/O space and memory space at PCI address 0x0. The PCI code already uses the CPU address when assigning addresses to memory BARs, so for memory space the PCI address should be the same as the CPU address. This also matches how all other device trees using snps,dw-pcie are configured. The existing configuration appears to work, even if it is incorrect. For some reason the iATU doesn't obey the existing configuration, and doesn't translate CPU accesses from 0x08000000 to PCI address 0x0. The reason why the existing configuration works at all is probably because the default behavior, when there is no match, is to use the untranslated address. This happens to work for memory space, since it's a 1:1 mapping. However, instead of relying on this behavior, let's configure the iATU correctly. Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.17.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html