| Message ID | 1543401907-14751-1-git-send-email-t-kristo@ti.com |
|---|---|
| State | Accepted |
| Commit | b79e7b3bd1f2b66186278e8df80f371f310138f1 |
| Headers | show |
| Series | ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node | expand |
On 11/28/18 4:45 AM, Tero Kristo wrote: > Hwmod parses the DT hierarchically from root to search for matching > ti,hwmod property. With the introduction of L4 data, we have two nodes > with the ti,hwmod = "gmac" declaration, and the hwmod core only matches > the first one found, which is the target-module one. This node incorrectly > dropped the ti,no-idle flag, which causes number of problems, like ignoring > errata i877, and also causing an intermittent boot failure on certain dra7 > boards. > > Fix the issue by moving the ti,no-idle flag to the proper node. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> > --- > FYI: The problem is seen in linux-next. Thank you. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> -- regards, -grygorii
* Grygorii Strashko <grygorii.strashko@ti.com> [181128 23:11]: > > > On 11/28/18 4:45 AM, Tero Kristo wrote: > > Hwmod parses the DT hierarchically from root to search for matching > > ti,hwmod property. With the introduction of L4 data, we have two nodes > > with the ti,hwmod = "gmac" declaration, and the hwmod core only matches > > the first one found, which is the target-module one. This node incorrectly > > dropped the ti,no-idle flag, which causes number of problems, like ignoring > > errata i877, and also causing an intermittent boot failure on certain dra7 > > boards. > > > > Fix the issue by moving the ti,no-idle flag to the proper node. > > > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > > Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> > > --- > > FYI: The problem is seen in linux-next. > > Thank you. > Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Thanks for catching it, applying into omap-for-v4.21/dt-ti-sysc. Regards, Tony
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 7e5c0d4f..6c01ada 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -3021,6 +3021,14 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x84000 0x4000>; + /* + * Do not allow gating of cpsw clock as workaround + * for errata i877. Keeping internal clock disabled + * causes the device switching characteristics + * to degrade over time and eventually fail to meet + * the data manual delay time/skew specs. + */ + ti,no-idle; mac: ethernet@0 { compatible = "ti,dra7-cpsw","ti,cpsw"; @@ -3040,15 +3048,6 @@ #size-cells = <1>; /* - * Do not allow gating of cpsw clock as workaround - * for errata i877. Keeping internal clock disabled - * causes the device switching characteristics - * to degrade over time and eventually fail to meet - * the data manual delay time/skew specs. - */ - ti,no-idle; - - /* * rx_thresh_pend * rx_pend * tx_pend
Hwmod parses the DT hierarchically from root to search for matching ti,hwmod property. With the introduction of L4 data, we have two nodes with the ti,hwmod = "gmac" declaration, and the hwmod core only matches the first one found, which is the target-module one. This node incorrectly dropped the ti,no-idle flag, which causes number of problems, like ignoring errata i877, and also causing an intermittent boot failure on certain dra7 boards. Fix the issue by moving the ti,no-idle flag to the proper node. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> --- FYI: The problem is seen in linux-next. arch/arm/boot/dts/dra7-l4.dtsi | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) -- 1.9.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki