diff mbox series

[v5,2/3] drm/i915: Move on the new pm runtime interface

Message ID 1545388436-7489-3-git-send-email-vincent.guittot@linaro.org
State Accepted
Commit 3b4ed2e2eb5583774a1ed4aa4596a5a3c55f2567
Headers show
Series None | expand

Commit Message

Vincent Guittot Dec. 21, 2018, 10:33 a.m. UTC
Use the new pm runtime interface to get the accounted suspended time:
pm_runtime_suspended_time().
This new interface helps to simplify and cleanup the code that computes
__I915_SAMPLE_RC6_ESTIMATED and to remove direct access to internals of
PM runtime.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

---
 drivers/gpu/drm/i915/i915_pmu.c | 16 ++++++----------
 drivers/gpu/drm/i915/i915_pmu.h |  4 ++--
 2 files changed, 8 insertions(+), 12 deletions(-)

-- 
2.7.4

Comments

Tvrtko Ursulin Dec. 21, 2018, 11:33 a.m. UTC | #1
Hi,

On 21/12/2018 10:33, Vincent Guittot wrote:
> Use the new pm runtime interface to get the accounted suspended time:

> pm_runtime_suspended_time().

> This new interface helps to simplify and cleanup the code that computes

> __I915_SAMPLE_RC6_ESTIMATED and to remove direct access to internals of

> PM runtime.

> 

> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

> ---

>   drivers/gpu/drm/i915/i915_pmu.c | 16 ++++++----------

>   drivers/gpu/drm/i915/i915_pmu.h |  4 ++--

>   2 files changed, 8 insertions(+), 12 deletions(-)

> 

> diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c

> index d6c8f8f..3f76f60 100644

> --- a/drivers/gpu/drm/i915/i915_pmu.c

> +++ b/drivers/gpu/drm/i915/i915_pmu.c

> @@ -5,6 +5,7 @@

>    */

>   

>   #include <linux/irq.h>

> +#include <linux/pm_runtime.h>

>   #include "i915_pmu.h"

>   #include "intel_ringbuffer.h"

>   #include "i915_drv.h"

> @@ -478,7 +479,6 @@ static u64 get_rc6(struct drm_i915_private *i915)

>   		 * counter value.

>   		 */

>   		spin_lock_irqsave(&i915->pmu.lock, flags);

> -		spin_lock(&kdev->power.lock);

>   

>   		/*

>   		 * After the above branch intel_runtime_pm_get_if_in_use failed

> @@ -491,16 +491,13 @@ static u64 get_rc6(struct drm_i915_private *i915)

>   		 * suspended and if not we cannot do better than report the last

>   		 * known RC6 value.

>   		 */

> -		if (kdev->power.runtime_status == RPM_SUSPENDED) {

> -			if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur)

> -				i915->pmu.suspended_jiffies_last =

> -						  kdev->power.suspended_jiffies;

> +		if (pm_runtime_status_suspended(kdev)) {

> +			val = pm_runtime_suspended_time(kdev);


There is a race condition between the status check and timestamp access 
which the existing code solves by holding the power.lock over it. But I 
don't exactly remember how this issue was manifesting. Is 
kdev->power.suspended_jiffies perhaps reset on exit from runtime 
suspend, which was then underflowing the val, not sure.

Anyways, is the new way of doing this safe with regards to this race? In 
other words is the value pm_runtime_suspended_time always monotonic, 
even when not suspended? If not we have to handle the race somehow.

If it is always monotonic, then worst case we report one wrong sample, 
which I guess is still not ideal since someone could be querying the PMU 
with quite low frequency.

There are tests which probably can hit this, but to run them 
automatically your patches would need to be rebased on drm-tip and maybe 
sent to our trybot. I can do that after the holiday break if you are 
okay with having the series waiting until then.

Regards,

Tvrtko

>   

> -			val = kdev->power.suspended_jiffies -

> -			      i915->pmu.suspended_jiffies_last;

> -			val += jiffies - kdev->power.accounting_timestamp;

> +			if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur)

> +				i915->pmu.suspended_time_last = val;

>   

> -			val = jiffies_to_nsecs(val);

> +			val -= i915->pmu.suspended_time_last;

>   			val += i915->pmu.sample[__I915_SAMPLE_RC6].cur;

>   

>   			i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur = val;

> @@ -510,7 +507,6 @@ static u64 get_rc6(struct drm_i915_private *i915)

>   			val = i915->pmu.sample[__I915_SAMPLE_RC6].cur;

>   		}

>   

> -		spin_unlock(&kdev->power.lock);

>   		spin_unlock_irqrestore(&i915->pmu.lock, flags);

>   	}

>   

> diff --git a/drivers/gpu/drm/i915/i915_pmu.h b/drivers/gpu/drm/i915/i915_pmu.h

> index 7f164ca..3dc2a30 100644

> --- a/drivers/gpu/drm/i915/i915_pmu.h

> +++ b/drivers/gpu/drm/i915/i915_pmu.h

> @@ -95,9 +95,9 @@ struct i915_pmu {

>   	 */

>   	struct i915_pmu_sample sample[__I915_NUM_PMU_SAMPLERS];

>   	/**

> -	 * @suspended_jiffies_last: Cached suspend time from PM core.

> +	 * @suspended_time_last: Cached suspend time from PM core.

>   	 */

> -	unsigned long suspended_jiffies_last;

> +	u64 suspended_time_last;

>   	/**

>   	 * @i915_attr: Memory block holding device attributes.

>   	 */

>
Tvrtko Ursulin Dec. 31, 2018, 12:32 p.m. UTC | #2
On 21/12/2018 13:26, Vincent Guittot wrote:
> On Fri, 21 Dec 2018 at 12:33, Tvrtko Ursulin

> <tvrtko.ursulin@linux.intel.com> wrote:

>>

>>

>> Hi,

>>

>> On 21/12/2018 10:33, Vincent Guittot wrote:

>>> Use the new pm runtime interface to get the accounted suspended time:

>>> pm_runtime_suspended_time().

>>> This new interface helps to simplify and cleanup the code that computes

>>> __I915_SAMPLE_RC6_ESTIMATED and to remove direct access to internals of

>>> PM runtime.

>>>

>>> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

>>> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>

>>> ---

>>>    drivers/gpu/drm/i915/i915_pmu.c | 16 ++++++----------

>>>    drivers/gpu/drm/i915/i915_pmu.h |  4 ++--

>>>    2 files changed, 8 insertions(+), 12 deletions(-)

>>>

>>> diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c

>>> index d6c8f8f..3f76f60 100644

>>> --- a/drivers/gpu/drm/i915/i915_pmu.c

>>> +++ b/drivers/gpu/drm/i915/i915_pmu.c

>>> @@ -5,6 +5,7 @@

>>>     */

>>>

>>>    #include <linux/irq.h>

>>> +#include <linux/pm_runtime.h>

>>>    #include "i915_pmu.h"

>>>    #include "intel_ringbuffer.h"

>>>    #include "i915_drv.h"

>>> @@ -478,7 +479,6 @@ static u64 get_rc6(struct drm_i915_private *i915)

>>>                 * counter value.

>>>                 */

>>>                spin_lock_irqsave(&i915->pmu.lock, flags);

>>> -             spin_lock(&kdev->power.lock);

>>>

>>>                /*

>>>                 * After the above branch intel_runtime_pm_get_if_in_use failed

>>> @@ -491,16 +491,13 @@ static u64 get_rc6(struct drm_i915_private *i915)

>>>                 * suspended and if not we cannot do better than report the last

>>>                 * known RC6 value.

>>>                 */

>>> -             if (kdev->power.runtime_status == RPM_SUSPENDED) {

>>> -                     if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur)

>>> -                             i915->pmu.suspended_jiffies_last =

>>> -                                               kdev->power.suspended_jiffies;

>>> +             if (pm_runtime_status_suspended(kdev)) {

>>> +                     val = pm_runtime_suspended_time(kdev);

>>

>> There is a race condition between the status check and timestamp access

>> which the existing code solves by holding the power.lock over it. But I

>> don't exactly remember how this issue was manifesting. Is

>> kdev->power.suspended_jiffies perhaps reset on exit from runtime

>> suspend, which was then underflowing the val, not sure.

>>

>> Anyways, is the new way of doing this safe with regards to this race? In

> 

> AFAICT it is safe.

> The current version does:

> 1-take lock,

> 2-test if dev is suspended

> 3-read some internals field to computed an up-to-date suspended time

> 4-update __I915_SAMPLE_RC6_ESTIMATED

> 5-release lock

> 

> The new version does:

> 1-test if dev is suspended

> 2-get an up-to-date  suspended time with pm_runtime_suspended_time.

> This is atomic and monotonic

> 3-update __I915_SAMPLE_RC6_ESTIMATED

> 

> A change from suspended to another states that happens just before

> step 1 is ok for both as we will run the else if

> No change of the state can happen after step 1 in current code and the

> estimated suspended time will be the time up to step2. In parallel,

> Any state change will have to wait step5 to continue

> If a change from suspended to another state happens after step 1 in

> new code, the suspended time return by PM core will be the time up to

> this change. So I would say you don't delay state transition and you

> get a more accurate estimated suspended time (even if the difference

> should be small).

> If a change from suspended to another state happens after step 2 in

> new code, the suspended time return by PM core will be the time up to

> step 2 so there is no changes

> 

> 

>> other words is the value pm_runtime_suspended_time always monotonic,

>> even when not suspended? If not we have to handle the race somehow.

> 

> Yes pm_runtime_suspended_time is monotonic and stays unchanged when

> not suspended

> 

>>

>> If it is always monotonic, then worst case we report one wrong sample,

>> which I guess is still not ideal since someone could be querying the PMU

>> with quite low frequency.

>>

>> There are tests which probably can hit this, but to run them

>> automatically your patches would need to be rebased on drm-tip and maybe

>> sent to our trybot. I can do that after the holiday break if you are

>> okay with having the series waiting until then.

> 

> yes looks good to me


Looks good to me as well. And our CI agrees with it. So:

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>


I assume you will take the patch through some power related tree and we 
will eventually pull it back to drm-tip.

Regards,

Tvrtko
Vincent Guittot Jan. 7, 2019, 2:03 p.m. UTC | #3
Hi Tvrtko,

On Mon, 31 Dec 2018 at 13:32, Tvrtko Ursulin
<tvrtko.ursulin@linux.intel.com> wrote:
>

>

> On 21/12/2018 13:26, Vincent Guittot wrote:

> > On Fri, 21 Dec 2018 at 12:33, Tvrtko Ursulin


[snip]

> >>

> >> If it is always monotonic, then worst case we report one wrong sample,

> >> which I guess is still not ideal since someone could be querying the PMU

> >> with quite low frequency.

> >>

> >> There are tests which probably can hit this, but to run them

> >> automatically your patches would need to be rebased on drm-tip and maybe

> >> sent to our trybot. I can do that after the holiday break if you are

> >> okay with having the series waiting until then.

> >

> > yes looks good to me

>

> Looks good to me as well. And our CI agrees with it. So:

>

> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>


Thanks for the review and the test

>

> I assume you will take the patch through some power related tree and we

> will eventually pull it back to drm-tip.


Rafael,
How do you want to proceed with this patch and the 2 others of the serie ?

Regards,
Vincent

>

> Regards,

>

> Tvrtko
Rafael J. Wysocki Jan. 7, 2019, 2:21 p.m. UTC | #4
On Mon, Jan 7, 2019 at 3:04 PM Vincent Guittot
<vincent.guittot@linaro.org> wrote:
>

> Hi Tvrtko,

>

> On Mon, 31 Dec 2018 at 13:32, Tvrtko Ursulin

> <tvrtko.ursulin@linux.intel.com> wrote:

> >

> >

> > On 21/12/2018 13:26, Vincent Guittot wrote:

> > > On Fri, 21 Dec 2018 at 12:33, Tvrtko Ursulin

>

> [snip]

>

> > >>

> > >> If it is always monotonic, then worst case we report one wrong sample,

> > >> which I guess is still not ideal since someone could be querying the PMU

> > >> with quite low frequency.

> > >>

> > >> There are tests which probably can hit this, but to run them

> > >> automatically your patches would need to be rebased on drm-tip and maybe

> > >> sent to our trybot. I can do that after the holiday break if you are

> > >> okay with having the series waiting until then.

> > >

> > > yes looks good to me

> >

> > Looks good to me as well. And our CI agrees with it. So:

> >

> > Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

>

> Thanks for the review and the test

>

> >

> > I assume you will take the patch through some power related tree and we

> > will eventually pull it back to drm-tip.

>

> Rafael,

> How do you want to proceed with this patch and the 2 others of the serie ?


I'm going to queue up the whole series for 5.1.

Thanks!
Rafael J. Wysocki Jan. 16, 2019, 11:59 a.m. UTC | #5
On Monday, January 7, 2019 3:21:49 PM CET Rafael J. Wysocki wrote:
> On Mon, Jan 7, 2019 at 3:04 PM Vincent Guittot

> <vincent.guittot@linaro.org> wrote:

> >

> > Hi Tvrtko,

> >

> > On Mon, 31 Dec 2018 at 13:32, Tvrtko Ursulin

> > <tvrtko.ursulin@linux.intel.com> wrote:

> > >

> > >

> > > On 21/12/2018 13:26, Vincent Guittot wrote:

> > > > On Fri, 21 Dec 2018 at 12:33, Tvrtko Ursulin

> >

> > [snip]

> >

> > > >>

> > > >> If it is always monotonic, then worst case we report one wrong sample,

> > > >> which I guess is still not ideal since someone could be querying the PMU

> > > >> with quite low frequency.

> > > >>

> > > >> There are tests which probably can hit this, but to run them

> > > >> automatically your patches would need to be rebased on drm-tip and maybe

> > > >> sent to our trybot. I can do that after the holiday break if you are

> > > >> okay with having the series waiting until then.

> > > >

> > > > yes looks good to me

> > >

> > > Looks good to me as well. And our CI agrees with it. So:

> > >

> > > Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

> >

> > Thanks for the review and the test

> >

> > >

> > > I assume you will take the patch through some power related tree and we

> > > will eventually pull it back to drm-tip.

> >

> > Rafael,

> > How do you want to proceed with this patch and the 2 others of the serie ?

> 

> I'm going to queue up the whole series for 5.1.


And it has been queued up now, thanks!
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
index d6c8f8f..3f76f60 100644
--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -5,6 +5,7 @@ 
  */
 
 #include <linux/irq.h>
+#include <linux/pm_runtime.h>
 #include "i915_pmu.h"
 #include "intel_ringbuffer.h"
 #include "i915_drv.h"
@@ -478,7 +479,6 @@  static u64 get_rc6(struct drm_i915_private *i915)
 		 * counter value.
 		 */
 		spin_lock_irqsave(&i915->pmu.lock, flags);
-		spin_lock(&kdev->power.lock);
 
 		/*
 		 * After the above branch intel_runtime_pm_get_if_in_use failed
@@ -491,16 +491,13 @@  static u64 get_rc6(struct drm_i915_private *i915)
 		 * suspended and if not we cannot do better than report the last
 		 * known RC6 value.
 		 */
-		if (kdev->power.runtime_status == RPM_SUSPENDED) {
-			if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur)
-				i915->pmu.suspended_jiffies_last =
-						  kdev->power.suspended_jiffies;
+		if (pm_runtime_status_suspended(kdev)) {
+			val = pm_runtime_suspended_time(kdev);
 
-			val = kdev->power.suspended_jiffies -
-			      i915->pmu.suspended_jiffies_last;
-			val += jiffies - kdev->power.accounting_timestamp;
+			if (!i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur)
+				i915->pmu.suspended_time_last = val;
 
-			val = jiffies_to_nsecs(val);
+			val -= i915->pmu.suspended_time_last;
 			val += i915->pmu.sample[__I915_SAMPLE_RC6].cur;
 
 			i915->pmu.sample[__I915_SAMPLE_RC6_ESTIMATED].cur = val;
@@ -510,7 +507,6 @@  static u64 get_rc6(struct drm_i915_private *i915)
 			val = i915->pmu.sample[__I915_SAMPLE_RC6].cur;
 		}
 
-		spin_unlock(&kdev->power.lock);
 		spin_unlock_irqrestore(&i915->pmu.lock, flags);
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_pmu.h b/drivers/gpu/drm/i915/i915_pmu.h
index 7f164ca..3dc2a30 100644
--- a/drivers/gpu/drm/i915/i915_pmu.h
+++ b/drivers/gpu/drm/i915/i915_pmu.h
@@ -95,9 +95,9 @@  struct i915_pmu {
 	 */
 	struct i915_pmu_sample sample[__I915_NUM_PMU_SAMPLERS];
 	/**
-	 * @suspended_jiffies_last: Cached suspend time from PM core.
+	 * @suspended_time_last: Cached suspend time from PM core.
 	 */
-	unsigned long suspended_jiffies_last;
+	u64 suspended_time_last;
 	/**
 	 * @i915_attr: Memory block holding device attributes.
 	 */