| Message ID | 20190111195707.2086-1-dmurphy@ti.com |
|---|---|
| State | Accepted |
| Commit | 49ad8171e56c5ef5422837fd6fe5b6eb5091d27f |
| Headers | show |
| Series | [v3,1/3] iio: ti-ads124s08: Add DT binding documentation | expand |
On Fri, 11 Jan 2019 13:57:05 -0600 Dan Murphy <dmurphy@ti.com> wrote: > Adding binding documentation for Texas Instruments ADS124S08 > and ADS124S06 ADC. > > S08 is a 12 channel ADC > S06 is a 6 channel ADC > > Datesheet can be found here: > http://www.ti.com/lit/gpn/ads124s08 > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Hopefully I haven't missed anything and this one is as trivial as I think. Applied to the togreg branch of iio.git and pushed out as testing. Comments still welcome. I'll push this out as a non rebasing tree later in the week. Thanks, Jonathan > --- > > v3 - Fixed the compatible made the colon spacing consistent - https://lore.kernel.org/patchwork/patch/1023969/ > v2 - Fixed incorrect compatible example and removed vref-supply - https://lore.kernel.org/patchwork/patch/1021047/ > > .../bindings/iio/adc/ti-ads124s08.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt > new file mode 100644 > index 000000000000..ecf807bb32f7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt > @@ -0,0 +1,25 @@ > +* Texas Instruments' ads124s08 and ads124s06 ADC chip > + > +Required properties: > + - compatible : > + "ti,ads124s08" > + "ti,ads124s06" > + - reg : spi chip select number for the device > + > +Recommended properties: > + - spi-max-frequency : Definition as per > + Documentation/devicetree/bindings/spi/spi-bus.txt > + - spi-cpha : Definition as per > + Documentation/devicetree/bindings/spi/spi-bus.txt > + > +Optional properties: > + - reset-gpios : GPIO pin used to reset the device. > + > +Example: > +adc@0 { > + compatible = "ti,ads124s08"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + spi-cpha; > + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; > +};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt new file mode 100644 index 000000000000..ecf807bb32f7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt @@ -0,0 +1,25 @@ +* Texas Instruments' ads124s08 and ads124s06 ADC chip + +Required properties: + - compatible : + "ti,ads124s08" + "ti,ads124s06" + - reg : spi chip select number for the device + +Recommended properties: + - spi-max-frequency : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - spi-cpha : Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - reset-gpios : GPIO pin used to reset the device. + +Example: +adc@0 { + compatible = "ti,ads124s08"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpha; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +};
Adding binding documentation for Texas Instruments ADS124S08 and ADS124S06 ADC. S08 is a 12 channel ADC S06 is a 6 channel ADC Datesheet can be found here: http://www.ti.com/lit/gpn/ads124s08 Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v3 - Fixed the compatible made the colon spacing consistent - https://lore.kernel.org/patchwork/patch/1023969/ v2 - Fixed incorrect compatible example and removed vref-supply - https://lore.kernel.org/patchwork/patch/1021047/ .../bindings/iio/adc/ti-ads124s08.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt -- 2.20.1.98.gecbdaf0899