| Message ID | 1545039990-19984-10-git-send-email-jorge.ramirez-ortiz@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [01/13] clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency | expand |
On Mon 17 Dec 01:46 PST 2018, Jorge Ramirez-Ortiz wrote: > Add a CPU OPP table to qcs404 > > Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> > Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> > Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index 9b5c165..4594fea7 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -62,6 +62,21 @@ > }; > }; > > + cpu_opp_table: cpu_opp_table { Please don't use _ in the node name. (cpu_opp_table: cpu-opp-table) Apart from that, this looks good Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp-1094400000 { > + opp-hz = /bits/ 64 <1094400000>; > + }; > + opp-1248000000 { > + opp-hz = /bits/ 64 <1248000000>; > + }; > + opp-1401600000 { > + opp-hz = /bits/ 64 <1401600000>; > + }; > + }; > + > firmware { > scm: scm { > compatible = "qcom,scm-qcs404", "qcom,scm"; > -- > 2.7.4 >
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9b5c165..4594fea7 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -62,6 +62,21 @@ }; }; + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + firmware { scm: scm { compatible = "qcom,scm-qcs404", "qcom,scm";