diff mbox series

[3/4] thermal: qcom: Add RPMHPD cooling device driver.

Message ID 1565398727-23090-4-git-send-email-thara.gopinath@linaro.org
State New
Headers show
Series qcom: Model RPMH power domains as thermal cooling devices | expand

Commit Message

Thara Gopinath Aug. 10, 2019, 12:58 a.m. UTC
The MX power domain in RPMH can be used to warm the
the SoC in SDM845. To support this feature, introduce
a RPMH power domain cooling device driver that can be
plugged into the thermal framework.(The thermal framework
itself requires further modifiction to support a warming
device in place of a cooling device. Those extensions are
not introduced in this patch series).

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

---
 drivers/thermal/qcom/Kconfig            |   7 ++
 drivers/thermal/qcom/Makefile           |   1 +
 drivers/thermal/qcom/qcom-rpmhpd-cdev.c | 141 ++++++++++++++++++++++++++++++++
 3 files changed, 149 insertions(+)
 create mode 100644 drivers/thermal/qcom/qcom-rpmhpd-cdev.c

-- 
2.1.4

Comments

Ulf Hansson Aug. 22, 2019, 3:19 p.m. UTC | #1
On Sat, 10 Aug 2019 at 02:58, Thara Gopinath <thara.gopinath@linaro.org> wrote:
>

> The MX power domain in RPMH can be used to warm the

> the SoC in SDM845. To support this feature, introduce

> a RPMH power domain cooling device driver that can be

> plugged into the thermal framework.(The thermal framework

> itself requires further modifiction to support a warming

> device in place of a cooling device. Those extensions are

> not introduced in this patch series).

>

> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

> ---

>  drivers/thermal/qcom/Kconfig            |   7 ++

>  drivers/thermal/qcom/Makefile           |   1 +

>  drivers/thermal/qcom/qcom-rpmhpd-cdev.c | 141 ++++++++++++++++++++++++++++++++

>  3 files changed, 149 insertions(+)

>  create mode 100644 drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>

> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig

> index aa9c1d8..a540130 100644

> --- a/drivers/thermal/qcom/Kconfig

> +++ b/drivers/thermal/qcom/Kconfig

> @@ -20,3 +20,10 @@ config QCOM_SPMI_TEMP_ALARM

>           trip points. The temperature reported by the thermal sensor reflects the

>           real time die temperature if an ADC is present or an estimate of the

>           temperature based upon the over temperature stage value.

> +

> +config CONFIG_QCOM_RPMHPD_CDEV

> +       tristate "Qualcomm RPMHPD based cooling device"

> +       depends on QCOM_RPMHPD

> +       help

> +         This enables RPMHPD based cooling devices. On SDM845, this is

> +         MX power domain.

> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile

> index 7c8dc6e..e4eb520 100644

> --- a/drivers/thermal/qcom/Makefile

> +++ b/drivers/thermal/qcom/Makefile

> @@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_TSENS)        += qcom_tsens.o

>  qcom_tsens-y                   += tsens.o tsens-common.o tsens-v0_1.o \

>                                    tsens-8960.o tsens-v2.o tsens-v1.o

>  obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)     += qcom-spmi-temp-alarm.o

> +obj-$(CONFIG_QCOM_RPMHPD_CDEV)         += qcom-rpmhpd-cdev.o

> diff --git a/drivers/thermal/qcom/qcom-rpmhpd-cdev.c b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> new file mode 100644

> index 0000000..265523b

> --- /dev/null

> +++ b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> @@ -0,0 +1,141 @@

> +// SPDX-License-Identifier: GPL-2.0

> +/*

> + * Copyright (c) 2019, Linaro Ltd

> + */

> +#include <linux/err.h>

> +#include <linux/kernel.h>

> +#include <linux/init.h>

> +#include <linux/of_device.h>

> +#include <linux/platform_device.h>

> +#include <linux/module.h>

> +#include <linux/pm_domain.h>

> +#include <linux/pm_runtime.h>

> +#include <linux/thermal.h>

> +

> +struct rpmhpd_cooling_device {

> +       struct thermal_cooling_device *cdev;

> +       struct device *pwr_domain;

> +       int max_state;

> +       int cur_state;

> +       bool is_pwr_domain_on;

> +};

> +

> +static const char sdm845_rpmhpd_cdev_name[] = "mx";

> +

> +static const struct of_device_id rpmhpd_cdev_match_table[] = {

> +       { .compatible = "qcom,sdm845-rpmhpd-cdev", .data = &sdm845_rpmhpd_cdev_name },

> +       { }

> +};

> +MODULE_DEVICE_TABLE(of, rpmhpd_cdev_match_table);

> +

> +static int rpmhpd_cdev_get_max_state(struct thermal_cooling_device *cdev,

> +                                    unsigned long *state)

> +{

> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +

> +       *state = rpmhpd_cdev->max_state;

> +       return 0;

> +}

> +

> +static int rpmhpd_cdev_get_cur_state(struct thermal_cooling_device *cdev,

> +                                    unsigned long *state)

> +{

> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +       int perf_state;

> +

> +       dev_pm_genpd_get_performance_state(rpmhpd_cdev->pwr_domain,

> +                                          &perf_state);

> +       *state = perf_state;

> +       return 0;

> +}

> +

> +static int rpmhpd_cdev_set_cur_state(struct thermal_cooling_device *cdev,

> +                                    unsigned long state)

> +{

> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +       struct device *pwr_domain = rpmhpd_cdev->pwr_domain;


Nitpick: Using pwr_domain as the name of the variable is a bit
confusing. Why not just name it "dev"?

> +       int ret;

> +

> +       ret = dev_pm_genpd_set_performance_state(pwr_domain, state);

> +

> +       if (ret)

> +               return ret;

> +

> +       if (state && !rpmhpd_cdev->is_pwr_domain_on) {


Nitpick: To clarify, I would suggest to rename "is_pwr_domain_on" to
"runtime_resumed".

> +               ret = pm_runtime_get_sync(pwr_domain);

> +               rpmhpd_cdev->is_pwr_domain_on = true;

> +       } else if (!state && rpmhpd_cdev->is_pwr_domain_on) {

> +               ret = pm_runtime_put(pwr_domain);

> +               rpmhpd_cdev->is_pwr_domain_on = false;

> +       }

> +

> +       return ret;

> +}

> +

> +static struct thermal_cooling_device_ops rpmhpd_cooling_device_ops = {

> +       .get_max_state = rpmhpd_cdev_get_max_state,

> +       .get_cur_state = rpmhpd_cdev_get_cur_state,

> +       .set_cur_state = rpmhpd_cdev_set_cur_state,

> +};

> +

> +static int rpmhpd_cdev_probe(struct platform_device *pdev)

> +{

> +       struct device *dev = &pdev->dev, *pd_dev;

> +       struct rpmhpd_cooling_device *rpmhpd_cdev;

> +       const char *rpmhpd_cdev_name = of_device_get_match_data(dev);

> +       unsigned int count;

> +       int ret;

> +

> +       if (!dev->pm_domain) {

> +               pd_dev = dev_pm_domain_attach_by_name(dev, rpmhpd_cdev_name);


I don't think this is needed, unless you have multiple PM domains that
can be attached per device.

If there is only one PM domain the platform bus should already have
attached it at this point.

> +               if (IS_ERR(pd_dev))

> +                       return PTR_ERR(pd_dev);

> +       } else {

> +               pd_dev = dev;

> +       }

> +

> +       rpmhpd_cdev = devm_kzalloc(dev, sizeof(*rpmhpd_cdev), GFP_KERNEL);

> +       if (!rpmhpd_cdev) {

> +               ret = -ENOMEM;

> +               goto detach_pd;

> +       }

> +

> +       ret = dev_pm_genpd_performance_state_count(pd_dev, &count);

> +       if (ret)

> +               goto detach_pd;

> +

> +       rpmhpd_cdev->pwr_domain = pd_dev;

> +       rpmhpd_cdev->max_state = count - 1;

> +       rpmhpd_cdev->is_pwr_domain_on = false;

> +

> +       pm_runtime_enable(pd_dev);

> +

> +       rpmhpd_cdev->cdev = thermal_of_cooling_device_register

> +                                       (dev->of_node, rpmhpd_cdev_name,

> +                                        rpmhpd_cdev,

> +                                        &rpmhpd_cooling_device_ops);

> +       if (IS_ERR(rpmhpd_cdev->cdev)) {

> +               dev_err(dev, "unable to register %s cooling device\n",

> +                       rpmhpd_cdev_name);

> +               ret = PTR_ERR(rpmhpd_cdev->cdev);

> +               goto detach_pd;

> +       }

> +

> +       return 0;

> +

> +detach_pd:

> +       dev_pm_domain_detach(pd_dev, false);


Not needed, see above.

> +       return ret;

> +}

> +

> +static struct platform_driver rpmhpd_cdev_driver = {

> +       .driver = {

> +               .name = "qcom-rpmhpd-cdev",

> +               .of_match_table = rpmhpd_cdev_match_table,

> +       },

> +       .probe = rpmhpd_cdev_probe,


Looks like you should implement a ->remove() callback as well. Or
perhaps you think this should be a built-in-driver?

> +};

> +module_platform_driver(rpmhpd_cdev_driver);

> +

> +MODULE_DESCRIPTION("Qualcomm RPMHPD cooling device driver");

> +MODULE_LICENSE("GPL v2");

> --

> 2.1.4

>


Kind regards
Uffe
Thara Gopinath Aug. 23, 2019, 5:51 p.m. UTC | #2
On 08/22/2019 11:19 AM, Ulf Hansson wrote:
> On Sat, 10 Aug 2019 at 02:58, Thara Gopinath <thara.gopinath@linaro.org> wrote:

>>

>> The MX power domain in RPMH can be used to warm the

>> the SoC in SDM845. To support this feature, introduce

>> a RPMH power domain cooling device driver that can be

>> plugged into the thermal framework.(The thermal framework

>> itself requires further modifiction to support a warming

>> device in place of a cooling device. Those extensions are

>> not introduced in this patch series).

>>

>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

>> ---

>>  drivers/thermal/qcom/Kconfig            |   7 ++

>>  drivers/thermal/qcom/Makefile           |   1 +

>>  drivers/thermal/qcom/qcom-rpmhpd-cdev.c | 141 ++++++++++++++++++++++++++++++++

>>  3 files changed, 149 insertions(+)

>>  create mode 100644 drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>>

>> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig

>> index aa9c1d8..a540130 100644

>> --- a/drivers/thermal/qcom/Kconfig

>> +++ b/drivers/thermal/qcom/Kconfig

>> @@ -20,3 +20,10 @@ config QCOM_SPMI_TEMP_ALARM

>>           trip points. The temperature reported by the thermal sensor reflects the

>>           real time die temperature if an ADC is present or an estimate of the

>>           temperature based upon the over temperature stage value.

>> +

>> +config CONFIG_QCOM_RPMHPD_CDEV

>> +       tristate "Qualcomm RPMHPD based cooling device"

>> +       depends on QCOM_RPMHPD

>> +       help

>> +         This enables RPMHPD based cooling devices. On SDM845, this is

>> +         MX power domain.

>> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile

>> index 7c8dc6e..e4eb520 100644

>> --- a/drivers/thermal/qcom/Makefile

>> +++ b/drivers/thermal/qcom/Makefile

>> @@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_TSENS)        += qcom_tsens.o

>>  qcom_tsens-y                   += tsens.o tsens-common.o tsens-v0_1.o \

>>                                    tsens-8960.o tsens-v2.o tsens-v1.o

>>  obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)     += qcom-spmi-temp-alarm.o

>> +obj-$(CONFIG_QCOM_RPMHPD_CDEV)         += qcom-rpmhpd-cdev.o

>> diff --git a/drivers/thermal/qcom/qcom-rpmhpd-cdev.c b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>> new file mode 100644

>> index 0000000..265523b

>> --- /dev/null

>> +++ b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>> @@ -0,0 +1,141 @@

>> +// SPDX-License-Identifier: GPL-2.0

>> +/*

>> + * Copyright (c) 2019, Linaro Ltd

>> + */

>> +#include <linux/err.h>

>> +#include <linux/kernel.h>

>> +#include <linux/init.h>

>> +#include <linux/of_device.h>

>> +#include <linux/platform_device.h>

>> +#include <linux/module.h>

>> +#include <linux/pm_domain.h>

>> +#include <linux/pm_runtime.h>

>> +#include <linux/thermal.h>

>> +

>> +struct rpmhpd_cooling_device {

>> +       struct thermal_cooling_device *cdev;

>> +       struct device *pwr_domain;

>> +       int max_state;

>> +       int cur_state;

>> +       bool is_pwr_domain_on;

>> +};

>> +

>> +static const char sdm845_rpmhpd_cdev_name[] = "mx";

>> +

>> +static const struct of_device_id rpmhpd_cdev_match_table[] = {

>> +       { .compatible = "qcom,sdm845-rpmhpd-cdev", .data = &sdm845_rpmhpd_cdev_name },

>> +       { }

>> +};

>> +MODULE_DEVICE_TABLE(of, rpmhpd_cdev_match_table);

>> +

>> +static int rpmhpd_cdev_get_max_state(struct thermal_cooling_device *cdev,

>> +                                    unsigned long *state)

>> +{

>> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +

>> +       *state = rpmhpd_cdev->max_state;

>> +       return 0;

>> +}

>> +

>> +static int rpmhpd_cdev_get_cur_state(struct thermal_cooling_device *cdev,

>> +                                    unsigned long *state)

>> +{

>> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +       int perf_state;

>> +

>> +       dev_pm_genpd_get_performance_state(rpmhpd_cdev->pwr_domain,

>> +                                          &perf_state);

>> +       *state = perf_state;

>> +       return 0;

>> +}

>> +

>> +static int rpmhpd_cdev_set_cur_state(struct thermal_cooling_device *cdev,

>> +                                    unsigned long state)

>> +{

>> +       struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +       struct device *pwr_domain = rpmhpd_cdev->pwr_domain;

> 

> Nitpick: Using pwr_domain as the name of the variable is a bit

> confusing. Why not just name it "dev"?


Sure! I will change it.

> 

>> +       int ret;

>> +

>> +       ret = dev_pm_genpd_set_performance_state(pwr_domain, state);

>> +

>> +       if (ret)

>> +               return ret;

>> +

>> +       if (state && !rpmhpd_cdev->is_pwr_domain_on) {

> 

> Nitpick: To clarify, I would suggest to rename "is_pwr_domain_on" to

> "runtime_resumed".


Done!

> 

>> +               ret = pm_runtime_get_sync(pwr_domain);

>> +               rpmhpd_cdev->is_pwr_domain_on = true;

>> +       } else if (!state && rpmhpd_cdev->is_pwr_domain_on) {

>> +               ret = pm_runtime_put(pwr_domain);

>> +               rpmhpd_cdev->is_pwr_domain_on = false;

>> +       }

>> +

>> +       return ret;

>> +}

>> +

>> +static struct thermal_cooling_device_ops rpmhpd_cooling_device_ops = {

>> +       .get_max_state = rpmhpd_cdev_get_max_state,

>> +       .get_cur_state = rpmhpd_cdev_get_cur_state,

>> +       .set_cur_state = rpmhpd_cdev_set_cur_state,

>> +};

>> +

>> +static int rpmhpd_cdev_probe(struct platform_device *pdev)

>> +{

>> +       struct device *dev = &pdev->dev, *pd_dev;

>> +       struct rpmhpd_cooling_device *rpmhpd_cdev;

>> +       const char *rpmhpd_cdev_name = of_device_get_match_data(dev);

>> +       unsigned int count;

>> +       int ret;

>> +

>> +       if (!dev->pm_domain) {

>> +               pd_dev = dev_pm_domain_attach_by_name(dev, rpmhpd_cdev_name);

> 

> I don't think this is needed, unless you have multiple PM domains that

> can be attached per device.

> 

> If there is only one PM domain the platform bus should already have

> attached it at this point.


I agree. I realized after sending the patches out. I will remove this at
this point. If there is a need to have multiple power domains , we can
add it back later. There is more changes needed in the driver to support
multiple power domains anyways.

> 

>> +               if (IS_ERR(pd_dev))

>> +                       return PTR_ERR(pd_dev);

>> +       } else {

>> +               pd_dev = dev;

>> +       }

>> +

>> +       rpmhpd_cdev = devm_kzalloc(dev, sizeof(*rpmhpd_cdev), GFP_KERNEL);

>> +       if (!rpmhpd_cdev) {

>> +               ret = -ENOMEM;

>> +               goto detach_pd;

>> +       }

>> +

>> +       ret = dev_pm_genpd_performance_state_count(pd_dev, &count);

>> +       if (ret)

>> +               goto detach_pd;

>> +

>> +       rpmhpd_cdev->pwr_domain = pd_dev;

>> +       rpmhpd_cdev->max_state = count - 1;

>> +       rpmhpd_cdev->is_pwr_domain_on = false;

>> +

>> +       pm_runtime_enable(pd_dev);

>> +

>> +       rpmhpd_cdev->cdev = thermal_of_cooling_device_register

>> +                                       (dev->of_node, rpmhpd_cdev_name,

>> +                                        rpmhpd_cdev,

>> +                                        &rpmhpd_cooling_device_ops);

>> +       if (IS_ERR(rpmhpd_cdev->cdev)) {

>> +               dev_err(dev, "unable to register %s cooling device\n",

>> +                       rpmhpd_cdev_name);

>> +               ret = PTR_ERR(rpmhpd_cdev->cdev);

>> +               goto detach_pd;

>> +       }

>> +

>> +       return 0;

>> +

>> +detach_pd:

>> +       dev_pm_domain_detach(pd_dev, false);

> 

> Not needed, see above.

> 

>> +       return ret;

>> +}

>> +

>> +static struct platform_driver rpmhpd_cdev_driver = {

>> +       .driver = {

>> +               .name = "qcom-rpmhpd-cdev",

>> +               .of_match_table = rpmhpd_cdev_match_table,

>> +       },

>> +       .probe = rpmhpd_cdev_probe,

> 

> Looks like you should implement a ->remove() callback as well. Or

> perhaps you think this should be a built-in-driver?


Mmm.. I think I will add a remove.

Regards
Thara
> 

>> +};

>> +module_platform_driver(rpmhpd_cdev_driver);

>> +

>> +MODULE_DESCRIPTION("Qualcomm RPMHPD cooling device driver");

>> +MODULE_LICENSE("GPL v2");

>> --

>> 2.1.4

>>

> 

> Kind regards

> Uffe

> 



-- 
Regards
Thara
Bjorn Andersson Aug. 24, 2019, 6:10 a.m. UTC | #3
On Fri 09 Aug 17:58 PDT 2019, Thara Gopinath wrote:

> The MX power domain in RPMH can be used to warm the

> the SoC in SDM845. To support this feature, introduce

> a RPMH power domain cooling device driver that can be

> plugged into the thermal framework.(The thermal framework

> itself requires further modifiction to support a warming

> device in place of a cooling device. Those extensions are

> not introduced in this patch series).

> 


This cooling device provides an interface to set a minimum state for a
power domain.  So while it's used for controlling the MX rail exposed by
the RPMh on some Qualcomm SoCs there's nothing Qualcomm/RPMh specific
with it.

Regards,
Bjorn
Thara Gopinath Aug. 27, 2019, 10:42 a.m. UTC | #4
On 08/24/2019 02:10 AM, Bjorn Andersson wrote:
> On Fri 09 Aug 17:58 PDT 2019, Thara Gopinath wrote:

> 

>> The MX power domain in RPMH can be used to warm the

>> the SoC in SDM845. To support this feature, introduce

>> a RPMH power domain cooling device driver that can be

>> plugged into the thermal framework.(The thermal framework

>> itself requires further modifiction to support a warming

>> device in place of a cooling device. Those extensions are

>> not introduced in this patch series).

>>

> 

> This cooling device provides an interface to set a minimum state for a

> power domain.  So while it's used for controlling the MX rail exposed by

> the RPMh on some Qualcomm SoCs there's nothing Qualcomm/RPMh specific

> with it.

Hi Bjorn,

I agree that there is nothing Qualcomm specific. Are you suggesting a
more generic driver here ?

Regards
Thara

> 

> Regards,

> Bjorn

> 



-- 
Regards
Thara
Zhang Rui Aug. 28, 2019, 12:23 p.m. UTC | #5
On Fri, 2019-08-09 at 20:58 -0400, Thara Gopinath wrote:
> The MX power domain in RPMH can be used to warm the

> the SoC in SDM845. To support this feature, introduce

> a RPMH power domain cooling device driver that can be

> plugged into the thermal framework.(The thermal framework

> itself requires further modifiction to support a warming

> device in place of a cooling device. Those extensions are

> not introduced in this patch series).


I'm wondering how this device is used, as well as the thermal extension
changes needed. To me, it's better to see this patch together with the
thermal extension changes.

thanks,
rui
> 

> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

> ---

>  drivers/thermal/qcom/Kconfig            |   7 ++

>  drivers/thermal/qcom/Makefile           |   1 +

>  drivers/thermal/qcom/qcom-rpmhpd-cdev.c | 141

> ++++++++++++++++++++++++++++++++

>  3 files changed, 149 insertions(+)

>  create mode 100644 drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> 

> diff --git a/drivers/thermal/qcom/Kconfig

> b/drivers/thermal/qcom/Kconfig

> index aa9c1d8..a540130 100644

> --- a/drivers/thermal/qcom/Kconfig

> +++ b/drivers/thermal/qcom/Kconfig

> @@ -20,3 +20,10 @@ config QCOM_SPMI_TEMP_ALARM

>  	  trip points. The temperature reported by the thermal sensor

> reflects the

>  	  real time die temperature if an ADC is present or an estimate

> of the

>  	  temperature based upon the over temperature stage value.

> +

> +config CONFIG_QCOM_RPMHPD_CDEV

> +	tristate "Qualcomm RPMHPD based cooling device"

> +	depends on QCOM_RPMHPD

> +	help

> +	  This enables RPMHPD based cooling devices. On SDM845, this is

> +	  MX power domain.

> diff --git a/drivers/thermal/qcom/Makefile

> b/drivers/thermal/qcom/Makefile

> index 7c8dc6e..e4eb520 100644

> --- a/drivers/thermal/qcom/Makefile

> +++ b/drivers/thermal/qcom/Makefile

> @@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o

>  qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o

> \

>  				   tsens-8960.o tsens-v2.o tsens-v1.o

>  obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o

> +obj-$(CONFIG_QCOM_RPMHPD_CDEV)		+= qcom-rpmhpd-cdev.o

> diff --git a/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> new file mode 100644

> index 0000000..265523b

> --- /dev/null

> +++ b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

> @@ -0,0 +1,141 @@

> +// SPDX-License-Identifier: GPL-2.0

> +/*

> + * Copyright (c) 2019, Linaro Ltd

> + */

> +#include <linux/err.h>

> +#include <linux/kernel.h>

> +#include <linux/init.h>

> +#include <linux/of_device.h>

> +#include <linux/platform_device.h>

> +#include <linux/module.h>

> +#include <linux/pm_domain.h>

> +#include <linux/pm_runtime.h>

> +#include <linux/thermal.h>

> +

> +struct rpmhpd_cooling_device {

> +	struct thermal_cooling_device *cdev;

> +	struct device *pwr_domain;

> +	int max_state;

> +	int cur_state;

> +	bool is_pwr_domain_on;

> +};

> +

> +static const char sdm845_rpmhpd_cdev_name[] = "mx";

> +

> +static const struct of_device_id rpmhpd_cdev_match_table[] = {

> +	{ .compatible = "qcom,sdm845-rpmhpd-cdev", .data =

> &sdm845_rpmhpd_cdev_name },

> +	{ }

> +};

> +MODULE_DEVICE_TABLE(of, rpmhpd_cdev_match_table);

> +

> +static int rpmhpd_cdev_get_max_state(struct thermal_cooling_device

> *cdev,

> +				     unsigned long *state)

> +{

> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +

> +	*state = rpmhpd_cdev->max_state;

> +	return 0;

> +}

> +

> +static int rpmhpd_cdev_get_cur_state(struct thermal_cooling_device

> *cdev,

> +				     unsigned long *state)

> +{

> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +	int perf_state;

> +

> +	dev_pm_genpd_get_performance_state(rpmhpd_cdev->pwr_domain,

> +					   &perf_state);

> +	*state = perf_state;

> +	return 0;

> +}

> +

> +static int rpmhpd_cdev_set_cur_state(struct thermal_cooling_device

> *cdev,

> +				     unsigned long state)

> +{

> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

> +	struct device *pwr_domain = rpmhpd_cdev->pwr_domain;

> +	int ret;

> +

> +	ret = dev_pm_genpd_set_performance_state(pwr_domain, state);

> +

> +	if (ret)

> +		return ret;

> +

> +	if (state && !rpmhpd_cdev->is_pwr_domain_on) {

> +		ret = pm_runtime_get_sync(pwr_domain);

> +		rpmhpd_cdev->is_pwr_domain_on = true;

> +	} else if (!state && rpmhpd_cdev->is_pwr_domain_on) {

> +		ret = pm_runtime_put(pwr_domain);

> +		rpmhpd_cdev->is_pwr_domain_on = false;

> +	}

> +

> +	return ret;

> +}

> +

> +static struct thermal_cooling_device_ops rpmhpd_cooling_device_ops =

> {

> +	.get_max_state = rpmhpd_cdev_get_max_state,

> +	.get_cur_state = rpmhpd_cdev_get_cur_state,

> +	.set_cur_state = rpmhpd_cdev_set_cur_state,

> +};

> +

> +static int rpmhpd_cdev_probe(struct platform_device *pdev)

> +{

> +	struct device *dev = &pdev->dev, *pd_dev;

> +	struct rpmhpd_cooling_device *rpmhpd_cdev;

> +	const char *rpmhpd_cdev_name = of_device_get_match_data(dev);

> +	unsigned int count;

> +	int ret;

> +

> +	if (!dev->pm_domain) {

> +		pd_dev = dev_pm_domain_attach_by_name(dev,

> rpmhpd_cdev_name);

> +		if (IS_ERR(pd_dev))

> +			return PTR_ERR(pd_dev);

> +	} else {

> +		pd_dev = dev;

> +	}

> +

> +	rpmhpd_cdev = devm_kzalloc(dev, sizeof(*rpmhpd_cdev),

> GFP_KERNEL);

> +	if (!rpmhpd_cdev) {

> +		ret = -ENOMEM;

> +		goto detach_pd;

> +	}

> +

> +	ret = dev_pm_genpd_performance_state_count(pd_dev, &count);

> +	if (ret)

> +		goto detach_pd;

> +

> +	rpmhpd_cdev->pwr_domain = pd_dev;

> +	rpmhpd_cdev->max_state = count - 1;

> +	rpmhpd_cdev->is_pwr_domain_on = false;

> +

> +	pm_runtime_enable(pd_dev);

> +

> +	rpmhpd_cdev->cdev = thermal_of_cooling_device_register

> +					(dev->of_node,

> rpmhpd_cdev_name,

> +					 rpmhpd_cdev,

> +					 &rpmhpd_cooling_device_ops);

> +	if (IS_ERR(rpmhpd_cdev->cdev)) {

> +		dev_err(dev, "unable to register %s cooling device\n",

> +			rpmhpd_cdev_name);

> +		ret = PTR_ERR(rpmhpd_cdev->cdev);

> +		goto detach_pd;

> +	}

> +

> +	return 0;

> +

> +detach_pd:

> +	dev_pm_domain_detach(pd_dev, false);

> +	return ret;

> +}

> +

> +static struct platform_driver rpmhpd_cdev_driver = {

> +	.driver = {

> +		.name = "qcom-rpmhpd-cdev",

> +		.of_match_table = rpmhpd_cdev_match_table,

> +	},

> +	.probe = rpmhpd_cdev_probe,

> +};

> +module_platform_driver(rpmhpd_cdev_driver);

> +

> +MODULE_DESCRIPTION("Qualcomm RPMHPD cooling device driver");

> +MODULE_LICENSE("GPL v2");
Bjorn Andersson Aug. 28, 2019, 7:22 p.m. UTC | #6
On Tue 27 Aug 03:42 PDT 2019, Thara Gopinath wrote:

> On 08/24/2019 02:10 AM, Bjorn Andersson wrote:

> > On Fri 09 Aug 17:58 PDT 2019, Thara Gopinath wrote:

> > 

> >> The MX power domain in RPMH can be used to warm the

> >> the SoC in SDM845. To support this feature, introduce

> >> a RPMH power domain cooling device driver that can be

> >> plugged into the thermal framework.(The thermal framework

> >> itself requires further modifiction to support a warming

> >> device in place of a cooling device. Those extensions are

> >> not introduced in this patch series).

> >>

> > 

> > This cooling device provides an interface to set a minimum state for a

> > power domain.  So while it's used for controlling the MX rail exposed by

> > the RPMh on some Qualcomm SoCs there's nothing Qualcomm/RPMh specific

> > with it.

> Hi Bjorn,

> 

> I agree that there is nothing Qualcomm specific. Are you suggesting a

> more generic driver here ?

> 


Yes, that's what I'm suggesting.

Regards,
Bjorn
Thara Gopinath Sept. 6, 2019, 3:05 p.m. UTC | #7
On 08/28/2019 08:23 AM, Zhang Rui wrote:
> On Fri, 2019-08-09 at 20:58 -0400, Thara Gopinath wrote:

>> The MX power domain in RPMH can be used to warm the

>> the SoC in SDM845. To support this feature, introduce

>> a RPMH power domain cooling device driver that can be

>> plugged into the thermal framework.(The thermal framework

>> itself requires further modifiction to support a warming

>> device in place of a cooling device. Those extensions are

>> not introduced in this patch series).

> 

> I'm wondering how this device is used, as well as the thermal extension

> changes needed. To me, it's better to see this patch together with the

> thermal extension changes.

Hello Rui,

I somehow missed this email. I am sorry about that.

IMHO, the thermal extensions, needed would be
1. Extend the dt-bindings either in the thermal-zone or in the trip
description to indicate whether a zone/trip is being monitored for
rising/falling temperature
2. Changes in thermal-core and the governors(starting with step-wise) to
monitor falling temperature as well.

There are comments for this patch series like fixing the genpd
extensions I have proposed and making the warming device more generic.
So I will post a v2 for this anyways.

I have some proto-type for the above mentioned extensions. I will post
them out asap.

Again, apologies for missing this email

Regards
Thara

> 

> thanks,

> rui

>>

>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>

>> ---

>>  drivers/thermal/qcom/Kconfig            |   7 ++

>>  drivers/thermal/qcom/Makefile           |   1 +

>>  drivers/thermal/qcom/qcom-rpmhpd-cdev.c | 141

>> ++++++++++++++++++++++++++++++++

>>  3 files changed, 149 insertions(+)

>>  create mode 100644 drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>>

>> diff --git a/drivers/thermal/qcom/Kconfig

>> b/drivers/thermal/qcom/Kconfig

>> index aa9c1d8..a540130 100644

>> --- a/drivers/thermal/qcom/Kconfig

>> +++ b/drivers/thermal/qcom/Kconfig

>> @@ -20,3 +20,10 @@ config QCOM_SPMI_TEMP_ALARM

>>  	  trip points. The temperature reported by the thermal sensor

>> reflects the

>>  	  real time die temperature if an ADC is present or an estimate

>> of the

>>  	  temperature based upon the over temperature stage value.

>> +

>> +config CONFIG_QCOM_RPMHPD_CDEV

>> +	tristate "Qualcomm RPMHPD based cooling device"

>> +	depends on QCOM_RPMHPD

>> +	help

>> +	  This enables RPMHPD based cooling devices. On SDM845, this is

>> +	  MX power domain.

>> diff --git a/drivers/thermal/qcom/Makefile

>> b/drivers/thermal/qcom/Makefile

>> index 7c8dc6e..e4eb520 100644

>> --- a/drivers/thermal/qcom/Makefile

>> +++ b/drivers/thermal/qcom/Makefile

>> @@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o

>>  qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o

>> \

>>  				   tsens-8960.o tsens-v2.o tsens-v1.o

>>  obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o

>> +obj-$(CONFIG_QCOM_RPMHPD_CDEV)		+= qcom-rpmhpd-cdev.o

>> diff --git a/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>> b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>> new file mode 100644

>> index 0000000..265523b

>> --- /dev/null

>> +++ b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c

>> @@ -0,0 +1,141 @@

>> +// SPDX-License-Identifier: GPL-2.0

>> +/*

>> + * Copyright (c) 2019, Linaro Ltd

>> + */

>> +#include <linux/err.h>

>> +#include <linux/kernel.h>

>> +#include <linux/init.h>

>> +#include <linux/of_device.h>

>> +#include <linux/platform_device.h>

>> +#include <linux/module.h>

>> +#include <linux/pm_domain.h>

>> +#include <linux/pm_runtime.h>

>> +#include <linux/thermal.h>

>> +

>> +struct rpmhpd_cooling_device {

>> +	struct thermal_cooling_device *cdev;

>> +	struct device *pwr_domain;

>> +	int max_state;

>> +	int cur_state;

>> +	bool is_pwr_domain_on;

>> +};

>> +

>> +static const char sdm845_rpmhpd_cdev_name[] = "mx";

>> +

>> +static const struct of_device_id rpmhpd_cdev_match_table[] = {

>> +	{ .compatible = "qcom,sdm845-rpmhpd-cdev", .data =

>> &sdm845_rpmhpd_cdev_name },

>> +	{ }

>> +};

>> +MODULE_DEVICE_TABLE(of, rpmhpd_cdev_match_table);

>> +

>> +static int rpmhpd_cdev_get_max_state(struct thermal_cooling_device

>> *cdev,

>> +				     unsigned long *state)

>> +{

>> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +

>> +	*state = rpmhpd_cdev->max_state;

>> +	return 0;

>> +}

>> +

>> +static int rpmhpd_cdev_get_cur_state(struct thermal_cooling_device

>> *cdev,

>> +				     unsigned long *state)

>> +{

>> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +	int perf_state;

>> +

>> +	dev_pm_genpd_get_performance_state(rpmhpd_cdev->pwr_domain,

>> +					   &perf_state);

>> +	*state = perf_state;

>> +	return 0;

>> +}

>> +

>> +static int rpmhpd_cdev_set_cur_state(struct thermal_cooling_device

>> *cdev,

>> +				     unsigned long state)

>> +{

>> +	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;

>> +	struct device *pwr_domain = rpmhpd_cdev->pwr_domain;

>> +	int ret;

>> +

>> +	ret = dev_pm_genpd_set_performance_state(pwr_domain, state);

>> +

>> +	if (ret)

>> +		return ret;

>> +

>> +	if (state && !rpmhpd_cdev->is_pwr_domain_on) {

>> +		ret = pm_runtime_get_sync(pwr_domain);

>> +		rpmhpd_cdev->is_pwr_domain_on = true;

>> +	} else if (!state && rpmhpd_cdev->is_pwr_domain_on) {

>> +		ret = pm_runtime_put(pwr_domain);

>> +		rpmhpd_cdev->is_pwr_domain_on = false;

>> +	}

>> +

>> +	return ret;

>> +}

>> +

>> +static struct thermal_cooling_device_ops rpmhpd_cooling_device_ops =

>> {

>> +	.get_max_state = rpmhpd_cdev_get_max_state,

>> +	.get_cur_state = rpmhpd_cdev_get_cur_state,

>> +	.set_cur_state = rpmhpd_cdev_set_cur_state,

>> +};

>> +

>> +static int rpmhpd_cdev_probe(struct platform_device *pdev)

>> +{

>> +	struct device *dev = &pdev->dev, *pd_dev;

>> +	struct rpmhpd_cooling_device *rpmhpd_cdev;

>> +	const char *rpmhpd_cdev_name = of_device_get_match_data(dev);

>> +	unsigned int count;

>> +	int ret;

>> +

>> +	if (!dev->pm_domain) {

>> +		pd_dev = dev_pm_domain_attach_by_name(dev,

>> rpmhpd_cdev_name);

>> +		if (IS_ERR(pd_dev))

>> +			return PTR_ERR(pd_dev);

>> +	} else {

>> +		pd_dev = dev;

>> +	}

>> +

>> +	rpmhpd_cdev = devm_kzalloc(dev, sizeof(*rpmhpd_cdev),

>> GFP_KERNEL);

>> +	if (!rpmhpd_cdev) {

>> +		ret = -ENOMEM;

>> +		goto detach_pd;

>> +	}

>> +

>> +	ret = dev_pm_genpd_performance_state_count(pd_dev, &count);

>> +	if (ret)

>> +		goto detach_pd;

>> +

>> +	rpmhpd_cdev->pwr_domain = pd_dev;

>> +	rpmhpd_cdev->max_state = count - 1;

>> +	rpmhpd_cdev->is_pwr_domain_on = false;

>> +

>> +	pm_runtime_enable(pd_dev);

>> +

>> +	rpmhpd_cdev->cdev = thermal_of_cooling_device_register

>> +					(dev->of_node,

>> rpmhpd_cdev_name,

>> +					 rpmhpd_cdev,

>> +					 &rpmhpd_cooling_device_ops);

>> +	if (IS_ERR(rpmhpd_cdev->cdev)) {

>> +		dev_err(dev, "unable to register %s cooling device\n",

>> +			rpmhpd_cdev_name);

>> +		ret = PTR_ERR(rpmhpd_cdev->cdev);

>> +		goto detach_pd;

>> +	}

>> +

>> +	return 0;

>> +

>> +detach_pd:

>> +	dev_pm_domain_detach(pd_dev, false);

>> +	return ret;

>> +}

>> +

>> +static struct platform_driver rpmhpd_cdev_driver = {

>> +	.driver = {

>> +		.name = "qcom-rpmhpd-cdev",

>> +		.of_match_table = rpmhpd_cdev_match_table,

>> +	},

>> +	.probe = rpmhpd_cdev_probe,

>> +};

>> +module_platform_driver(rpmhpd_cdev_driver);

>> +

>> +MODULE_DESCRIPTION("Qualcomm RPMHPD cooling device driver");

>> +MODULE_LICENSE("GPL v2");

> 



-- 
Regards
Thara
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index aa9c1d8..a540130 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -20,3 +20,10 @@  config QCOM_SPMI_TEMP_ALARM
 	  trip points. The temperature reported by the thermal sensor reflects the
 	  real time die temperature if an ADC is present or an estimate of the
 	  temperature based upon the over temperature stage value.
+
+config CONFIG_QCOM_RPMHPD_CDEV
+	tristate "Qualcomm RPMHPD based cooling device"
+	depends on QCOM_RPMHPD
+	help
+	  This enables RPMHPD based cooling devices. On SDM845, this is
+	  MX power domain.
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 7c8dc6e..e4eb520 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -4,3 +4,4 @@  obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
 qcom_tsens-y			+= tsens.o tsens-common.o tsens-v0_1.o \
 				   tsens-8960.o tsens-v2.o tsens-v1.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
+obj-$(CONFIG_QCOM_RPMHPD_CDEV)		+= qcom-rpmhpd-cdev.o
diff --git a/drivers/thermal/qcom/qcom-rpmhpd-cdev.c b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c
new file mode 100644
index 0000000..265523b
--- /dev/null
+++ b/drivers/thermal/qcom/qcom-rpmhpd-cdev.c
@@ -0,0 +1,141 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/thermal.h>
+
+struct rpmhpd_cooling_device {
+	struct thermal_cooling_device *cdev;
+	struct device *pwr_domain;
+	int max_state;
+	int cur_state;
+	bool is_pwr_domain_on;
+};
+
+static const char sdm845_rpmhpd_cdev_name[] = "mx";
+
+static const struct of_device_id rpmhpd_cdev_match_table[] = {
+	{ .compatible = "qcom,sdm845-rpmhpd-cdev", .data = &sdm845_rpmhpd_cdev_name },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rpmhpd_cdev_match_table);
+
+static int rpmhpd_cdev_get_max_state(struct thermal_cooling_device *cdev,
+				     unsigned long *state)
+{
+	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;
+
+	*state = rpmhpd_cdev->max_state;
+	return 0;
+}
+
+static int rpmhpd_cdev_get_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long *state)
+{
+	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;
+	int perf_state;
+
+	dev_pm_genpd_get_performance_state(rpmhpd_cdev->pwr_domain,
+					   &perf_state);
+	*state = perf_state;
+	return 0;
+}
+
+static int rpmhpd_cdev_set_cur_state(struct thermal_cooling_device *cdev,
+				     unsigned long state)
+{
+	struct rpmhpd_cooling_device *rpmhpd_cdev = cdev->devdata;
+	struct device *pwr_domain = rpmhpd_cdev->pwr_domain;
+	int ret;
+
+	ret = dev_pm_genpd_set_performance_state(pwr_domain, state);
+
+	if (ret)
+		return ret;
+
+	if (state && !rpmhpd_cdev->is_pwr_domain_on) {
+		ret = pm_runtime_get_sync(pwr_domain);
+		rpmhpd_cdev->is_pwr_domain_on = true;
+	} else if (!state && rpmhpd_cdev->is_pwr_domain_on) {
+		ret = pm_runtime_put(pwr_domain);
+		rpmhpd_cdev->is_pwr_domain_on = false;
+	}
+
+	return ret;
+}
+
+static struct thermal_cooling_device_ops rpmhpd_cooling_device_ops = {
+	.get_max_state = rpmhpd_cdev_get_max_state,
+	.get_cur_state = rpmhpd_cdev_get_cur_state,
+	.set_cur_state = rpmhpd_cdev_set_cur_state,
+};
+
+static int rpmhpd_cdev_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev, *pd_dev;
+	struct rpmhpd_cooling_device *rpmhpd_cdev;
+	const char *rpmhpd_cdev_name = of_device_get_match_data(dev);
+	unsigned int count;
+	int ret;
+
+	if (!dev->pm_domain) {
+		pd_dev = dev_pm_domain_attach_by_name(dev, rpmhpd_cdev_name);
+		if (IS_ERR(pd_dev))
+			return PTR_ERR(pd_dev);
+	} else {
+		pd_dev = dev;
+	}
+
+	rpmhpd_cdev = devm_kzalloc(dev, sizeof(*rpmhpd_cdev), GFP_KERNEL);
+	if (!rpmhpd_cdev) {
+		ret = -ENOMEM;
+		goto detach_pd;
+	}
+
+	ret = dev_pm_genpd_performance_state_count(pd_dev, &count);
+	if (ret)
+		goto detach_pd;
+
+	rpmhpd_cdev->pwr_domain = pd_dev;
+	rpmhpd_cdev->max_state = count - 1;
+	rpmhpd_cdev->is_pwr_domain_on = false;
+
+	pm_runtime_enable(pd_dev);
+
+	rpmhpd_cdev->cdev = thermal_of_cooling_device_register
+					(dev->of_node, rpmhpd_cdev_name,
+					 rpmhpd_cdev,
+					 &rpmhpd_cooling_device_ops);
+	if (IS_ERR(rpmhpd_cdev->cdev)) {
+		dev_err(dev, "unable to register %s cooling device\n",
+			rpmhpd_cdev_name);
+		ret = PTR_ERR(rpmhpd_cdev->cdev);
+		goto detach_pd;
+	}
+
+	return 0;
+
+detach_pd:
+	dev_pm_domain_detach(pd_dev, false);
+	return ret;
+}
+
+static struct platform_driver rpmhpd_cdev_driver = {
+	.driver = {
+		.name = "qcom-rpmhpd-cdev",
+		.of_match_table = rpmhpd_cdev_match_table,
+	},
+	.probe = rpmhpd_cdev_probe,
+};
+module_platform_driver(rpmhpd_cdev_driver);
+
+MODULE_DESCRIPTION("Qualcomm RPMHPD cooling device driver");
+MODULE_LICENSE("GPL v2");