diff mbox series

[03/36] usb: gadget: s3c: use platform resources

Message ID 20191010203043.1241612-3-arnd@arndb.de
State New
Headers show
Series None | expand

Commit Message

Arnd Bergmann Oct. 10, 2019, 8:29 p.m. UTC
The resources are correctly initialized, so just use them
instead of relying on hardcoded data from platform headers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

---
 drivers/usb/gadget/udc/s3c2410_udc.c          | 31 +++++++------------
 drivers/usb/gadget/udc/s3c2410_udc.h          |  1 +
 .../usb/gadget/udc/s3c2410_udc_regs.h         |  0
 3 files changed, 12 insertions(+), 20 deletions(-)
 rename arch/arm/plat-samsung/include/plat/regs-udc.h => drivers/usb/gadget/udc/s3c2410_udc_regs.h (100%)

-- 
2.20.0

Comments

Krzysztof Kozlowski Oct. 23, 2019, 10:06 a.m. UTC | #1
On Thu, Oct 10, 2019 at 10:29:47PM +0200, Arnd Bergmann wrote:
> The resources are correctly initialized, so just use them

> instead of relying on hardcoded data from platform headers.

> 

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

> ---

>  drivers/usb/gadget/udc/s3c2410_udc.c          | 31 +++++++------------

>  drivers/usb/gadget/udc/s3c2410_udc.h          |  1 +

>  .../usb/gadget/udc/s3c2410_udc_regs.h         |  0

>  3 files changed, 12 insertions(+), 20 deletions(-)

>  rename arch/arm/plat-samsung/include/plat/regs-udc.h => drivers/usb/gadget/udc/s3c2410_udc_regs.h (100%)


Acked-by: Krzysztof Kozlowski <krzk@kernel.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index f82208fbc249..e411d27b79fc 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -36,15 +36,11 @@ 
 #include <asm/byteorder.h>
 #include <asm/irq.h>
 #include <asm/unaligned.h>
-#include <mach/irqs.h>
 
-#include <mach/hardware.h>
-
-#include <plat/regs-udc.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 
-
 #include "s3c2410_udc.h"
+#include "s3c2410_udc_regs.h"
 
 #define DRIVER_DESC	"S3C2410 USB Device Controller Gadget"
 #define DRIVER_AUTHOR	"Herbert Pƶtzl <herbert@13thfloor.at>, " \
@@ -57,6 +53,7 @@  static struct s3c2410_udc	*the_controller;
 static struct clk		*udc_clock;
 static struct clk		*usb_bus_clock;
 static void __iomem		*base_addr;
+static int			irq_usbd;
 static u64			rsrc_start;
 static u64			rsrc_len;
 static struct dentry		*s3c2410_udc_debugfs_root;
@@ -839,8 +836,6 @@  static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
 	}
 }
 
-#include <mach/regs-irq.h>
-
 /*
  *	s3c2410_udc_irq - interrupt handler
  */
@@ -981,7 +976,7 @@  static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev)
 		}
 	}
 
-	dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD);
+	dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", irq_usbd);
 
 	/* Restore old index */
 	udc_write(idx, S3C2410_UDC_INDEX_REG);
@@ -1784,13 +1779,7 @@  static int s3c2410_udc_probe(struct platform_device *pdev)
 	spin_lock_init(&udc->lock);
 	udc_info = dev_get_platdata(&pdev->dev);
 
-	rsrc_start = S3C2410_PA_USBDEV;
-	rsrc_len   = S3C24XX_SZ_USBDEV;
-
-	if (!request_mem_region(rsrc_start, rsrc_len, gadget_name))
-		return -EBUSY;
-
-	base_addr = ioremap(rsrc_start, rsrc_len);
+	base_addr = devm_platform_ioremap_resource(pdev, 0);
 	if (!base_addr) {
 		retval = -ENOMEM;
 		goto err_mem;
@@ -1802,17 +1791,19 @@  static int s3c2410_udc_probe(struct platform_device *pdev)
 	s3c2410_udc_disable(udc);
 	s3c2410_udc_reinit(udc);
 
+	irq_usbd = platform_get_irq(pdev, 0);
+
 	/* irq setup after old hardware state is cleaned up */
-	retval = request_irq(IRQ_USBD, s3c2410_udc_irq,
+	retval = request_irq(irq_usbd, s3c2410_udc_irq,
 			     0, gadget_name, udc);
 
 	if (retval != 0) {
-		dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval);
+		dev_err(dev, "cannot get irq %i, err %d\n", irq_usbd, retval);
 		retval = -EBUSY;
 		goto err_map;
 	}
 
-	dev_dbg(dev, "got irq %i\n", IRQ_USBD);
+	dev_dbg(dev, "got irq %i\n", irq_usbd);
 
 	if (udc_info && udc_info->vbus_pin > 0) {
 		retval = gpio_request(udc_info->vbus_pin, "udc vbus");
@@ -1879,7 +1870,7 @@  static int s3c2410_udc_probe(struct platform_device *pdev)
 	if (udc_info && udc_info->vbus_pin > 0)
 		gpio_free(udc_info->vbus_pin);
 err_int:
-	free_irq(IRQ_USBD, udc);
+	free_irq(irq_usbd, udc);
 err_map:
 	iounmap(base_addr);
 err_mem:
@@ -1913,7 +1904,7 @@  static int s3c2410_udc_remove(struct platform_device *pdev)
 		free_irq(irq, udc);
 	}
 
-	free_irq(IRQ_USBD, udc);
+	free_irq(irq_usbd, udc);
 
 	iounmap(base_addr);
 	release_mem_region(rsrc_start, rsrc_len);
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h
index bdcaa8dd300f..68bdf3e5aac2 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.h
+++ b/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -90,6 +90,7 @@  struct s3c2410_udc {
 	unsigned			req_pending : 1;
 	u8				vbus;
 	struct dentry			*regs_info;
+	int				irq;
 };
 #define to_s3c2410(g)	(container_of((g), struct s3c2410_udc, gadget))
 
diff --git a/arch/arm/plat-samsung/include/plat/regs-udc.h b/drivers/usb/gadget/udc/s3c2410_udc_regs.h
similarity index 100%
rename from arch/arm/plat-samsung/include/plat/regs-udc.h
rename to drivers/usb/gadget/udc/s3c2410_udc_regs.h