diff mbox series

[2/2] backlight: sky81452: Privatize platform data

Message ID 20200626203742.336780-2-linus.walleij@linaro.org
State Accepted
Commit 08bf73a6f056d84fd52a58c5d165523dd84be535
Headers show
Series [1/2] backlight: sky81452: Convert to GPIO descriptors | expand

Commit Message

Linus Walleij June 26, 2020, 8:37 p.m. UTC
The only way the platform data for the SKY81452 ever gets populated
is through the device tree.

The MFD device is bothered with this for no reason at all. Just
allocate the platform data in the driver and be happy.

Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/mfd/sky81452.c                        |  2 -
 drivers/video/backlight/sky81452-backlight.c  | 34 +++++++++++++----
 include/linux/mfd/sky81452.h                  |  2 -
 .../linux/platform_data/sky81452-backlight.h  | 37 -------------------
 4 files changed, 27 insertions(+), 48 deletions(-)
 delete mode 100644 include/linux/platform_data/sky81452-backlight.h

-- 
2.25.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Comments

Daniel Thompson June 29, 2020, 11:18 a.m. UTC | #1
On Fri, Jun 26, 2020 at 10:37:42PM +0200, Linus Walleij wrote:
> The only way the platform data for the SKY81452 ever gets populated

> is through the device tree.

> 

> The MFD device is bothered with this for no reason at all. Just

> allocate the platform data in the driver and be happy.

> 

> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>


Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>



Daniel.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Lee Jones July 1, 2020, 9:40 a.m. UTC | #2
On Fri, 26 Jun 2020, Linus Walleij wrote:

> The only way the platform data for the SKY81452 ever gets populated
> is through the device tree.
> 
> The MFD device is bothered with this for no reason at all. Just
> allocate the platform data in the driver and be happy.
> 
> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/mfd/sky81452.c                        |  2 -
>  drivers/video/backlight/sky81452-backlight.c  | 34 +++++++++++++----
>  include/linux/mfd/sky81452.h                  |  2 -
>  .../linux/platform_data/sky81452-backlight.h  | 37 -------------------
>  4 files changed, 27 insertions(+), 48 deletions(-)
>  delete mode 100644 include/linux/platform_data/sky81452-backlight.h

Applied, thanks.
diff mbox series

Patch

diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
index 76eedfae8553..3ad35bf0c015 100644
--- a/drivers/mfd/sky81452.c
+++ b/drivers/mfd/sky81452.c
@@ -47,8 +47,6 @@  static int sky81452_probe(struct i2c_client *client,
 	memset(cells, 0, sizeof(cells));
 	cells[0].name = "sky81452-backlight";
 	cells[0].of_compatible = "skyworks,sky81452-backlight";
-	cells[0].platform_data = pdata->bl_pdata;
-	cells[0].pdata_size = sizeof(*pdata->bl_pdata);
 	cells[1].name = "sky81452-regulator";
 	cells[1].platform_data = pdata->regulator_init_data;
 	cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index 81d2c8f3ca50..83ccb3d940fa 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -15,7 +15,6 @@ 
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/sky81452-backlight.h>
 #include <linux/slab.h>
 
 /* registers */
@@ -41,6 +40,29 @@ 
 #define SKY81452_DEFAULT_NAME "lcd-backlight"
 #define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
 
+/**
+ * struct sky81452_platform_data
+ * @name:	backlight driver name.
+		If it is not defined, default name is lcd-backlight.
+ * @gpios_enable:GPIO descriptor which control EN pin
+ * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm:	true if DPWMI should be ignored.
+ * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit:	It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+	const char *name;
+	struct gpio_desc *gpiod_enable;
+	unsigned int enable;
+	bool ignore_pwm;
+	bool dpwm_mode;
+	bool phase_shift;
+	unsigned int short_detection_threshold;
+	unsigned int boost_current_limit;
+};
+
 #define CTZ(b) __builtin_ctz(b)
 
 static int sky81452_bl_update_status(struct backlight_device *bd)
@@ -251,17 +273,15 @@  static int sky81452_bl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap = dev_get_drvdata(dev->parent);
-	struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
+	struct sky81452_bl_platform_data *pdata;
 	struct backlight_device *bd;
 	struct backlight_properties props;
 	const char *name;
 	int ret;
 
-	if (!pdata) {
-		pdata = sky81452_bl_parse_dt(dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
-	}
+	pdata = sky81452_bl_parse_dt(dev);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
 
 	ret = sky81452_bl_init_device(regmap, pdata);
 	if (ret < 0) {
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
index d469aa481243..b08570ff34df 100644
--- a/include/linux/mfd/sky81452.h
+++ b/include/linux/mfd/sky81452.h
@@ -9,11 +9,9 @@ 
 #ifndef _SKY81452_H
 #define _SKY81452_H
 
-#include <linux/platform_data/sky81452-backlight.h>
 #include <linux/regulator/machine.h>
 
 struct sky81452_platform_data {
-	struct sky81452_bl_platform_data *bl_pdata;
 	struct regulator_init_data *regulator_init_data;
 };
 
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
deleted file mode 100644
index d6f46670d923..000000000000
--- a/include/linux/platform_data/sky81452-backlight.h
+++ /dev/null
@@ -1,37 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sky81452.h	SKY81452 backlight driver
- *
- * Copyright 2014 Skyworks Solutions Inc.
- * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
- */
-
-#ifndef _SKY81452_BACKLIGHT_H
-#define _SKY81452_BACKLIGHT_H
-
-#include <linux/gpio/consumer.h>
-
-/**
- * struct sky81452_platform_data
- * @name:	backlight driver name.
-		If it is not defined, default name is lcd-backlight.
- * @gpios_enable:GPIO descriptor which control EN pin
- * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
- * @ignore_pwm:	true if DPWMI should be ignored.
- * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
- * @phase_shift:true is phase shift mode.
- * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
- * @boost_current_limit:	It should be one of 2300, 2750mA.
- */
-struct sky81452_bl_platform_data {
-	const char *name;
-	struct gpio_desc *gpiod_enable;
-	unsigned int enable;
-	bool ignore_pwm;
-	bool dpwm_mode;
-	bool phase_shift;
-	unsigned int short_detection_threshold;
-	unsigned int boost_current_limit;
-};
-
-#endif