| Message ID | 20200123141222.486-2-jagan@amarulasolutions.com |
|---|---|
| State | Accepted |
| Commit | 8040d8e00f83f957e2dab09518f19bb79b47a4a5 |
| Headers | show |
| Series | [1/4] rockchip: rk3288: Enable pre console buffer | expand |
On 2020/1/23 下午10:12, Jagan Teki wrote: > Sync rk3288-vyasa dts file from Linux. > > This sync has changes required to work HDMI output on > Vyasa RK3288 board. > > This sync excludes the io_domains node since it is not > available in rk3288.dtsi. > > Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are > not merged to Linux yet but wil resync later if any > further updates on this. > > Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang at rock-chips.com> Thanks, - Kever > --- > arch/arm/dts/rk3288-vyasa.dts | 79 ++++++++++++++--------------------- > 1 file changed, 32 insertions(+), 47 deletions(-) > > diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts > index 850aa25818..4193f7208c 100644 > --- a/arch/arm/dts/rk3288-vyasa.dts > +++ b/arch/arm/dts/rk3288-vyasa.dts > @@ -1,43 +1,6 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > /* > * Copyright (C) 2017 Jagan Teki <jagan at amarulasolutions.com> > - * > - * This file is dual-licensed: you can use it either under the terms > - * of the GPL or the X11 license, at your option. Note that this dual > - * licensing only applies to this file, and not this project as a > - * whole. > - * > - * a) This file is free software; you can redistribute it and/or > - * modify it under the terms of the GNU General Public License as > - * published by the Free Software Foundation; either version 2 of the > - * License, or (at your option) any later version. > - * > - * This file is distributed in the hope that it will be useful, > - * but WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > - * GNU General Public License for more details. > - * > - * Or, alternatively, > - * > - * b) Permission is hereby granted, free of charge, to any person > - * obtaining a copy of this software and associated documentation > - * files (the "Software"), to deal in the Software without > - * restriction, including without limitation the rights to use, > - * copy, modify, merge, publish, distribute, sublicense, and/or > - * sell copies of the Software, and to permit persons to whom the > - * Software is furnished to do so, subject to the following > - * conditions: > - * > - * The above copyright notice and this permission notice shall be > - * included in all copies or substantial portions of the Software. > - * > - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > - * OTHER DEALINGS IN THE SOFTWARE. > */ > > /dts-v1/; > @@ -115,6 +78,17 @@ > vin-supply = <&vcc_io>; > }; > > + vcc50_hdmi: vcc50-hdmi { > + compatible = "regulator-fixed"; > + regulator-name = "vcc50_hdmi"; > + enable-active-high; > + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc50_hdmi_en>; > + regulator-always-on; > + regulator-boot-on; > + vin-supply = <&vsus_5v>; > + }; > vusb1_5v: vusb1-5v { > compatible = "regulator-fixed"; > regulator-name = "vusb1_5v"; > @@ -158,7 +132,6 @@ > &emmc { > bus-width = <8>; > cap-mmc-highspeed; > - disable-wp; > non-removable; > pinctrl-names = "default"; > pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; > @@ -188,7 +161,7 @@ > }; > > &hdmi { > - ddc-i2c-bus = <&i2c2>; > + ddc-i2c-bus = <&i2c5>; > status = "okay"; > }; > > @@ -324,15 +297,15 @@ > }; > }; > > - vcc10_lcd: LDO_REG6 { > - regulator-name = "vcc10_lcd"; > + vdd10_lcd: LDO_REG6 { > + regulator-name = "vdd10_lcd"; > regulator-min-microvolt = <1000000>; > regulator-max-microvolt = <1000000>; > regulator-always-on; > regulator-boot-on; > regulator-state-mem { > regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > + regulator-suspend-microvolt = <1000000>; > }; > }; > > @@ -385,7 +358,7 @@ > }; > }; > > -&i2c2 { > +&i2c5 { > status = "okay"; > }; > > @@ -402,6 +375,12 @@ > status = "okay"; > }; > > +&tsadc { > + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ > + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ > + status = "okay"; > +}; > + > &uart2 { > status = "okay"; > }; > @@ -463,15 +442,21 @@ > }; > }; > > + hdmi { > + vcc50_hdmi_en: vcc50-hdmi-en { > + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > pmic { > pmic_int: pmic-int { > - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; > + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; > }; > }; > > usb_host { > phy_pwr_en: phy-pwr-en { > - rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; > + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; > }; > > usb2_pwr_en: usb2-pwr-en { > @@ -481,7 +466,7 @@ > > usb_otg { > otg_vbus_drv: otg-vbus-drv { > - rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; > > }; > };
diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts index 850aa25818..4193f7208c 100644 --- a/arch/arm/dts/rk3288-vyasa.dts +++ b/arch/arm/dts/rk3288-vyasa.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Jagan Teki <jagan at amarulasolutions.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -115,6 +78,17 @@ vin-supply = <&vcc_io>; }; + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + enable-active-high; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; vusb1_5v: vusb1-5v { compatible = "regulator-fixed"; regulator-name = "vusb1_5v"; @@ -158,7 +132,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; @@ -188,7 +161,7 @@ }; &hdmi { - ddc-i2c-bus = <&i2c2>; + ddc-i2c-bus = <&i2c5>; status = "okay"; }; @@ -324,15 +297,15 @@ }; }; - vcc10_lcd: LDO_REG6 { - regulator-name = "vcc10_lcd"; + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-suspend-microvolt = <1000000>; }; }; @@ -385,7 +358,7 @@ }; }; -&i2c2 { +&i2c5 { status = "okay"; }; @@ -402,6 +375,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + &uart2 { status = "okay"; }; @@ -463,15 +442,21 @@ }; }; + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb_host { phy_pwr_en: phy-pwr-en { - rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; }; usb2_pwr_en: usb2-pwr-en { @@ -481,7 +466,7 @@ usb_otg { otg_vbus_drv: otg-vbus-drv { - rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; };
Sync rk3288-vyasa dts file from Linux. This sync has changes required to work HDMI output on Vyasa RK3288 board. This sync excludes the io_domains node since it is not available in rk3288.dtsi. Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are not merged to Linux yet but wil resync later if any further updates on this. Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/arm/dts/rk3288-vyasa.dts | 79 ++++++++++++++--------------------- 1 file changed, 32 insertions(+), 47 deletions(-)