Message ID | 20200331004851.282583-1-marex@denx.de |
---|---|
Headers | show |
Series | ARM: stm32: Fix Avenger96 | expand |
Hi Marek, > From: Marek Vasut <marex at denx.de> > Sent: mardi 31 mars 2020 02:49 > > This series fixes the Avenger96 board. Since there are way too many patches > floating around on the ML and because I found various other details that needed > fixing, I decided to bundle the whole set of fixes into this series. > > This should go into current release, otherwise the board doesn't even boot. > This V2 is also roughly synchronized with the Linux V2 series fixing very much > the same issues. Do you expect all these paches in v2020.04 ? so in 5 days. I think I can prepare a pull request with bugfix to solve regression, but it seems late for all the serie. For me: > ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96 It is clearly a regression since u-boot-stm32-20190717 / v2020.01-rc1 ! The next 4 patches of the serie could be also applied without issue > ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins > ARM: dts: stm32: Repair SDMMC1 operation on AV96 > ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7 > ARM: dts: stm32: Repair SDMMC2 operation But for the rest of the serie, I prefer wait v2020.04 merge window and end of reviews (on U-Boot side and on Linux kernel side). > ARM: dts: stm32: Add QSPI NOR on AV96 > ARM: dts: stm32: Use DT alias for the configuration EEPROM > ARM: dts: stm32: Add configuration EEPROM on AV96 > ARM: dts: stm32: Add alternate pinmux for ethernet RGMII > ARM: dts: stm32: Repair ethernet operation on AV96 > ARM: dts: stm32: Add missing ethernet PHY reset on AV96 > ARM: dts: stm32: Repair PMIC configuration on AV96 > ARM: dts: stm32: Adjust PLL4 settings on AV96 > ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board > > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/stm32mp157-pinctrl.dtsi | 96 +++++ > arch/arm/dts/stm32mp157a-avenger96.dts | 365 +----------------- > arch/arm/dts/stm32mp15xx-dhcom.dtsi | 6 +- > .../stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 80 ++++ > arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts | 211 ++++++++++ ...oot.dtsi > => stm32mp15xx-dhcor-u-boot.dtsi} | 80 +--- > arch/arm/dts/stm32mp15xx-dhcor.dtsi | 231 +++++++++++ > board/dhelectronics/dh_stm32mp1/board.c | 15 +- > doc/board/st/stm32mp1.rst | 8 +- > 10 files changed, 645 insertions(+), 450 deletions(-) create mode 100644 > arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi > create mode 100644 arch/arm/dts/stm32mp15xx-dhcor-avenger96.dts > rename arch/arm/dts/{stm32mp157a-avenger96-u-boot.dtsi => stm32mp15xx- > dhcor-u-boot.dtsi} (73%) create mode 100644 arch/arm/dts/stm32mp15xx- > dhcor.dtsi > > Cc: Patrick Delaunay <patrick.delaunay at st.com> > Cc: Patrice Chotard <patrice.chotard at st.com> Regards > -- > 2.25.1
On 3/31/20 5:22 PM, Patrick DELAUNAY wrote: > Hi Marek, Hi, >> From: Marek Vasut <marex at denx.de> >> Sent: mardi 31 mars 2020 02:49 >> >> This series fixes the Avenger96 board. Since there are way too many patches >> floating around on the ML and because I found various other details that needed >> fixing, I decided to bundle the whole set of fixes into this series. >> >> This should go into current release, otherwise the board doesn't even boot. >> This V2 is also roughly synchronized with the Linux V2 series fixing very much >> the same issues. > > Do you expect all these paches in v2020.04 ? so in 5 days. Yes, the timing is bad, but this is fixing real bugs and is isolated to one (two) boards. > I think I can prepare a pull request with bugfix to solve regression, but it seems late for all the serie. > > For me: >> ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96 > > It is clearly a regression since u-boot-stm32-20190717 / v2020.01-rc1 ! > > The next 4 patches of the serie could be also applied without issue >> ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins >> ARM: dts: stm32: Repair SDMMC1 operation on AV96 >> ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7 >> ARM: dts: stm32: Repair SDMMC2 operation > > But for the rest of the serie, I prefer wait v2020.04 merge window and end of reviews > (on U-Boot side and on Linux kernel side). > >> ARM: dts: stm32: Add QSPI NOR on AV96 This one you need to have working env storage. >> ARM: dts: stm32: Use DT alias for the configuration EEPROM >> ARM: dts: stm32: Add configuration EEPROM on AV96 This one you need , otherwise ethernet MAC doesn't get correct MAC address. >> ARM: dts: stm32: Add alternate pinmux for ethernet RGMII >> ARM: dts: stm32: Repair ethernet operation on AV96 This actually fixes ethernet. >> ARM: dts: stm32: Add missing ethernet PHY reset on AV96 >> ARM: dts: stm32: Repair PMIC configuration on AV96 This fixes PMIC settings, so you do want this, otherwise the board is unstable. >> ARM: dts: stm32: Adjust PLL4 settings on AV96 This one can probably wait, although it would make sense to put it in. >> ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board This one can wait for next. [...]