Message ID | 20200829142948.32365-1-krzk@kernel.org |
---|---|
State | New |
Headers | show |
Series | [1/4] dt-bindings: net: nfc: s3fwrn5: Convert to dtschema | expand |
On Sat, Aug 29, 2020 at 04:29:45PM +0200, Krzysztof Kozlowski wrote: > Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema. > This is conversion only so it includes properties with invalid prefixes > (s3fwrn5,en-gpios) which should be addressed later. > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- > .../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 -------- > .../devicetree/bindings/net/nfc/s3fwrn5.yaml | 59 +++++++++++++++++++ Please rename to samsung,s3fwrn5-i2c.yaml. > MAINTAINERS | 1 + > 3 files changed, 60 insertions(+), 25 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > create mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > > diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > deleted file mode 100644 > index f02f6fb7f81c..000000000000 > --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > +++ /dev/null > @@ -1,25 +0,0 @@ > -* Samsung S3FWRN5 NCI NFC Controller > - > -Required properties: > -- compatible: Should be "samsung,s3fwrn5-i2c". > -- reg: address on the bus > -- interrupts: GPIO interrupt to which the chip is connected > -- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip > -- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and > - sleep/wakeup control > - > -Example: > - > -&hsi2c_4 { > - s3fwrn5@27 { > - compatible = "samsung,s3fwrn5-i2c"; > - > - reg = <0x27>; > - > - interrupt-parent = <&gpa1>; > - interrupts = <3 0 0>; > - > - s3fwrn5,en-gpios = <&gpf1 4 0>; > - s3fwrn5,fw-gpios = <&gpj0 2 0>; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > new file mode 100644 > index 000000000000..c22451dea350 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/nfc/s3fwrn5.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Samsung S3FWRN5 NCI NFC Controller > + > +maintainers: > + - Krzysztof Kozlowski <krzk@kernel.org> > + - Krzysztof Opasiak <k.opasiak@samsung.com> > + > +properties: > + compatible: > + const: samsung,s3fwrn5-i2c > + > + interrupts: > + maxItems: 1 > + > + reg: > + maxItems: 1 > + > + s3fwrn5,en-gpios: > + maxItems: 1 > + description: > + Output GPIO pin used for enabling/disabling the chip > + > + s3fwrn5,fw-gpios: > + maxItems: 1 > + description: > + Output GPIO pin used to enter firmware mode and sleep/wakeup control > + > +required: > + - compatible > + - interrupts > + - reg > + - s3fwrn5,en-gpios > + - s3fwrn5,fw-gpios additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/irq.h> > + > + i2c4 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + s3fwrn5@27 { > + compatible = "samsung,s3fwrn5-i2c"; > + reg = <0x27>; > + > + interrupt-parent = <&gpa1>; > + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; > + > + s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; > + s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; > + }; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index ac79fdbdf8d0..91b3d5c349d8 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com> > M: Krzysztof Opasiak <k.opasiak@samsung.com> > L: linux-nfc@lists.01.org (moderated for non-subscribers) > S: Supported > +F: Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > F: drivers/nfc/s3fwrn5 > > SAMSUNG S5C73M3 CAMERA DRIVER > -- > 2.17.1 >
On Thu, 3 Sep 2020 at 18:33, Rob Herring <robh@kernel.org> wrote: > > On Sat, Aug 29, 2020 at 04:29:45PM +0200, Krzysztof Kozlowski wrote: > > Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema. > > This is conversion only so it includes properties with invalid prefixes > > (s3fwrn5,en-gpios) which should be addressed later. > > > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > > --- > > .../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 -------- > > .../devicetree/bindings/net/nfc/s3fwrn5.yaml | 59 +++++++++++++++++++ > > Please rename to samsung,s3fwrn5-i2c.yaml. > > > MAINTAINERS | 1 + > > 3 files changed, 60 insertions(+), 25 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > > create mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > > > > diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > > deleted file mode 100644 > > index f02f6fb7f81c..000000000000 > > --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt > > +++ /dev/null > > @@ -1,25 +0,0 @@ > > -* Samsung S3FWRN5 NCI NFC Controller > > - > > -Required properties: > > -- compatible: Should be "samsung,s3fwrn5-i2c". > > -- reg: address on the bus > > -- interrupts: GPIO interrupt to which the chip is connected > > -- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip > > -- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and > > - sleep/wakeup control > > - > > -Example: > > - > > -&hsi2c_4 { > > - s3fwrn5@27 { > > - compatible = "samsung,s3fwrn5-i2c"; > > - > > - reg = <0x27>; > > - > > - interrupt-parent = <&gpa1>; > > - interrupts = <3 0 0>; > > - > > - s3fwrn5,en-gpios = <&gpf1 4 0>; > > - s3fwrn5,fw-gpios = <&gpj0 2 0>; > > - }; > > -}; > > diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > > new file mode 100644 > > index 000000000000..c22451dea350 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml > > @@ -0,0 +1,59 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/nfc/s3fwrn5.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Samsung S3FWRN5 NCI NFC Controller > > + > > +maintainers: > > + - Krzysztof Kozlowski <krzk@kernel.org> > > + - Krzysztof Opasiak <k.opasiak@samsung.com> > > + > > +properties: > > + compatible: > > + const: samsung,s3fwrn5-i2c > > + > > + interrupts: > > + maxItems: 1 > > + > > + reg: > > + maxItems: 1 > > + > > + s3fwrn5,en-gpios: > > + maxItems: 1 > > + description: > > + Output GPIO pin used for enabling/disabling the chip > > + > > + s3fwrn5,fw-gpios: > > + maxItems: 1 > > + description: > > + Output GPIO pin used to enter firmware mode and sleep/wakeup control > > + > > +required: > > + - compatible > > + - interrupts > > + - reg > > + - s3fwrn5,en-gpios > > + - s3fwrn5,fw-gpios > > additionalProperties: false Sure, I'll fix both issues. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt deleted file mode 100644 index f02f6fb7f81c..000000000000 --- a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Samsung S3FWRN5 NCI NFC Controller - -Required properties: -- compatible: Should be "samsung,s3fwrn5-i2c". -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip -- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and - sleep/wakeup control - -Example: - -&hsi2c_4 { - s3fwrn5@27 { - compatible = "samsung,s3fwrn5-i2c"; - - reg = <0x27>; - - interrupt-parent = <&gpa1>; - interrupts = <3 0 0>; - - s3fwrn5,en-gpios = <&gpf1 4 0>; - s3fwrn5,fw-gpios = <&gpj0 2 0>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml new file mode 100644 index 000000000000..c22451dea350 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/s3fwrn5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3FWRN5 NCI NFC Controller + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Krzysztof Opasiak <k.opasiak@samsung.com> + +properties: + compatible: + const: samsung,s3fwrn5-i2c + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + s3fwrn5,en-gpios: + maxItems: 1 + description: + Output GPIO pin used for enabling/disabling the chip + + s3fwrn5,fw-gpios: + maxItems: 1 + description: + Output GPIO pin used to enter firmware mode and sleep/wakeup control + +required: + - compatible + - interrupts + - reg + - s3fwrn5,en-gpios + - s3fwrn5,fw-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + s3fwrn5@27 { + compatible = "samsung,s3fwrn5-i2c"; + reg = <0x27>; + + interrupt-parent = <&gpa1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + + s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; + s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index ac79fdbdf8d0..91b3d5c349d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15273,6 +15273,7 @@ M: Robert Baldyga <r.baldyga@samsung.com> M: Krzysztof Opasiak <k.opasiak@samsung.com> L: linux-nfc@lists.01.org (moderated for non-subscribers) S: Supported +F: Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml F: drivers/nfc/s3fwrn5 SAMSUNG S5C73M3 CAMERA DRIVER
Convert the Samsung S3FWRN5 NCI NFC controller bindings to dtschema. This is conversion only so it includes properties with invalid prefixes (s3fwrn5,en-gpios) which should be addressed later. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../devicetree/bindings/net/nfc/s3fwrn5.txt | 25 -------- .../devicetree/bindings/net/nfc/s3fwrn5.yaml | 59 +++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 60 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt create mode 100644 Documentation/devicetree/bindings/net/nfc/s3fwrn5.yaml