| Message ID | 1596122076-341293-4-git-send-email-steven.sistare@oracle.com |
|---|---|
| State | New |
| Headers | show |
| Series | [V1,01/32] savevm: add vmstate handler iterators | expand |
* Steve Sistare (steven.sistare@oracle.com) wrote: > To enable live reboot, provide the cprsave QMP command and the VMS_REBOOT > vmstate-saving operation, which saves the state of the virtual machine in a > simple file. > > Syntax: > {'command':'cprsave', 'data':{'file':'str', 'mode':'str'}} > > The mode argument must be 'reboot'. Additional modes will be defined in > the future. > > Unlike the savevm command, cprsave supports any type of guest image and > block device. cprsave stops the VM so that guest ram and block devices are > not modified after state is saved. Guest ram must be mapped to a persistent > memory file such as /dev/dax0.0. The ram object vmstate handler and block > device handler do not apply to VMS_REBOOT, so restrict them to VMS_MIGRATE > or VMS_SNAPSHOT. After cprsave completes successfully, qemu exits. > > After issuing cprsave, the caller may update qemu, update the host kernel, > reboot, start qemu using the same arguments as the original process, and > issue the cprload command to restore the guest. cprload is added by > subsequent patches. > > If the caller suspends the guest instead of stopping the VM, such as by > issuing guest-suspend-ram to the qemu guest agent, then cprsave and cprload > support guests with vfio devices. The guest drivers suspend methods flush > outstanding requests and re-initialize the devices, and thus there is no > device state to save and restore. > > Signed-off-by: Steve Sistare <steven.sistare@oracle.com> > Signed-off-by: Maran Wilson <maran.wilson@oracle.com> Going back a step; could you..... > --- > include/migration/vmstate.h | 1 + > include/sysemu/sysemu.h | 2 ++ > migration/block.c | 1 + > migration/ram.c | 1 + > migration/savevm.c | 59 +++++++++++++++++++++++++++++++++++++++++++++ > monitor/qmp-cmds.c | 6 +++++ > qapi/migration.json | 14 +++++++++++ > 7 files changed, 84 insertions(+) > > diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h > index fa575f9..c58551a 100644 > --- a/include/migration/vmstate.h > +++ b/include/migration/vmstate.h > @@ -161,6 +161,7 @@ typedef enum { > typedef enum { > VMS_MIGRATE = (1U << 1), > VMS_SNAPSHOT = (1U << 2), > + VMS_REBOOT = (1U << 3), > VMS_MODE_ALL = ~0U > } VMStateMode; > > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h > index 4b6a5c4..6fe86e6 100644 > --- a/include/sysemu/sysemu.h > +++ b/include/sysemu/sysemu.h > @@ -24,6 +24,8 @@ extern bool machine_init_done; > void qemu_add_machine_init_done_notifier(Notifier *notify); > void qemu_remove_machine_init_done_notifier(Notifier *notify); > > +void save_cpr_snapshot(const char *file, const char *mode, Error **errp); > + > extern int autostart; > > typedef enum { > diff --git a/migration/block.c b/migration/block.c > index 737b649..a69accb 100644 > --- a/migration/block.c > +++ b/migration/block.c > @@ -1023,6 +1023,7 @@ static SaveVMHandlers savevm_block_handlers = { > .load_state = block_load, > .save_cleanup = block_migration_cleanup, > .is_active = block_is_active, > + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, > }; > > void blk_mig_init(void) > diff --git a/migration/ram.c b/migration/ram.c > index 76d4fee..f0d5d9f 100644 > --- a/migration/ram.c > +++ b/migration/ram.c > @@ -3795,6 +3795,7 @@ static SaveVMHandlers savevm_ram_handlers = { > .load_setup = ram_load_setup, > .load_cleanup = ram_load_cleanup, > .resume_prepare = ram_resume_prepare, > + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, > }; > > void ram_mig_init(void) > diff --git a/migration/savevm.c b/migration/savevm.c > index ce02b6b..ff1a46e 100644 > --- a/migration/savevm.c > +++ b/migration/savevm.c > @@ -2680,6 +2680,65 @@ int qemu_load_device_state(QEMUFile *f) > return 0; > } > > +static QEMUFile *qf_file_open(const char *filename, int flags, int mode, > + Error **errp) > +{ > + QIOChannel *ioc; > + int fd = qemu_open(filename, flags, mode); > + > + if (fd < 0) { > + error_setg_errno(errp, errno, "%s(%s)", __func__, filename); > + return NULL; > + } > + > + ioc = QIO_CHANNEL(qio_channel_file_new_fd(fd)); > + > + if (flags & O_WRONLY) { > + return qemu_fopen_channel_output(ioc); > + } > + > + return qemu_fopen_channel_input(ioc); > +} > + > +void save_cpr_snapshot(const char *file, const char *mode, Error **errp) > +{ > + int ret = 0; > + QEMUFile *f; > + VMStateMode op; > + > + if (!strcmp(mode, "reboot")) { > + op = VMS_REBOOT; > + } else { > + error_setg(errp, "cprsave: bad mode %s", mode); > + return; > + } > + > + f = qf_file_open(file, O_CREAT | O_WRONLY | O_TRUNC, 0600, errp); > + if (!f) { > + return; > + } > + > + ret = global_state_store(); > + if (ret) { > + error_setg(errp, "Error saving global state"); > + qemu_fclose(f); > + return; > + } > + > + vm_stop(RUN_STATE_SAVE_VM); > + > + ret = qemu_savevm_state(f, op, errp); > + if ((ret < 0) && !*errp) { > + error_setg(errp, "qemu_savevm_state failed"); > + } just call qemu_save_device_state(f) there rather than introducing the modes? What you're doing is VERY similar to qmp_xen_save_devices_state and also COLO's device state saving. (and also very similar to migration with the x-ignore-shared flag set). Dave > + qemu_fclose(f); > + > + if (op == VMS_REBOOT) { > + no_shutdown = 0; > + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); > + } > +} > + > int save_snapshot(const char *name, Error **errp) > { > BlockDriverState *bs, *bs1; > diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c > index 864cbfa..9ec7b88 100644 > --- a/monitor/qmp-cmds.c > +++ b/monitor/qmp-cmds.c > @@ -35,6 +35,7 @@ > #include "qapi/qapi-commands-machine.h" > #include "qapi/qapi-commands-misc.h" > #include "qapi/qapi-commands-ui.h" > +#include "qapi/qapi-commands-migration.h" > #include "qapi/qmp/qerror.h" > #include "hw/mem/memory-device.h" > #include "hw/acpi/acpi_dev_interface.h" > @@ -161,6 +162,11 @@ void qmp_cont(Error **errp) > } > } > > +void qmp_cprsave(const char *file, const char *mode, Error **errp) > +{ > + save_cpr_snapshot(file, mode, errp); > +} > + > void qmp_system_wakeup(Error **errp) > { > if (!qemu_wakeup_suspend_enabled()) { > diff --git a/qapi/migration.json b/qapi/migration.json > index d500055..b61df1d 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -1621,3 +1621,17 @@ > ## > { 'event': 'UNPLUG_PRIMARY', > 'data': { 'device-id': 'str' } } > + > +## > +# @cprsave: > +# > +# Create a checkpoint of the virtual machine device state in @file. > +# Guest RAM and guest block device blocks are not saved. > +# > +# @file: name of checkpoint file > +# @mode: 'reboot' : checkpoint can be cprload'ed after a host kexec reboot. > +# > +# Since 5.0 > +## > +{ 'command': 'cprsave', 'data': { 'file': 'str', 'mode': 'str' } } > + > -- > 1.8.3.1 >
On 9/11/2020 12:43 PM, Dr. David Alan Gilbert wrote: > * Steve Sistare (steven.sistare@oracle.com) wrote: >> To enable live reboot, provide the cprsave QMP command and the VMS_REBOOT >> vmstate-saving operation, which saves the state of the virtual machine in a >> simple file. >> >> Syntax: >> {'command':'cprsave', 'data':{'file':'str', 'mode':'str'}} >> >> The mode argument must be 'reboot'. Additional modes will be defined in >> the future. >> >> Unlike the savevm command, cprsave supports any type of guest image and >> block device. cprsave stops the VM so that guest ram and block devices are >> not modified after state is saved. Guest ram must be mapped to a persistent >> memory file such as /dev/dax0.0. The ram object vmstate handler and block >> device handler do not apply to VMS_REBOOT, so restrict them to VMS_MIGRATE >> or VMS_SNAPSHOT. After cprsave completes successfully, qemu exits. >> >> After issuing cprsave, the caller may update qemu, update the host kernel, >> reboot, start qemu using the same arguments as the original process, and >> issue the cprload command to restore the guest. cprload is added by >> subsequent patches. >> >> If the caller suspends the guest instead of stopping the VM, such as by >> issuing guest-suspend-ram to the qemu guest agent, then cprsave and cprload >> support guests with vfio devices. The guest drivers suspend methods flush >> outstanding requests and re-initialize the devices, and thus there is no >> device state to save and restore. >> >> Signed-off-by: Steve Sistare <steven.sistare@oracle.com> >> Signed-off-by: Maran Wilson <maran.wilson@oracle.com> > > Going back a step; could you..... > >> --- >> include/migration/vmstate.h | 1 + >> include/sysemu/sysemu.h | 2 ++ >> migration/block.c | 1 + >> migration/ram.c | 1 + >> migration/savevm.c | 59 +++++++++++++++++++++++++++++++++++++++++++++ >> monitor/qmp-cmds.c | 6 +++++ >> qapi/migration.json | 14 +++++++++++ >> 7 files changed, 84 insertions(+) >> >> diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h >> index fa575f9..c58551a 100644 >> --- a/include/migration/vmstate.h >> +++ b/include/migration/vmstate.h >> @@ -161,6 +161,7 @@ typedef enum { >> typedef enum { >> VMS_MIGRATE = (1U << 1), >> VMS_SNAPSHOT = (1U << 2), >> + VMS_REBOOT = (1U << 3), >> VMS_MODE_ALL = ~0U >> } VMStateMode; >> >> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h >> index 4b6a5c4..6fe86e6 100644 >> --- a/include/sysemu/sysemu.h >> +++ b/include/sysemu/sysemu.h >> @@ -24,6 +24,8 @@ extern bool machine_init_done; >> void qemu_add_machine_init_done_notifier(Notifier *notify); >> void qemu_remove_machine_init_done_notifier(Notifier *notify); >> >> +void save_cpr_snapshot(const char *file, const char *mode, Error **errp); >> + >> extern int autostart; >> >> typedef enum { >> diff --git a/migration/block.c b/migration/block.c >> index 737b649..a69accb 100644 >> --- a/migration/block.c >> +++ b/migration/block.c >> @@ -1023,6 +1023,7 @@ static SaveVMHandlers savevm_block_handlers = { >> .load_state = block_load, >> .save_cleanup = block_migration_cleanup, >> .is_active = block_is_active, >> + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, >> }; >> >> void blk_mig_init(void) >> diff --git a/migration/ram.c b/migration/ram.c >> index 76d4fee..f0d5d9f 100644 >> --- a/migration/ram.c >> +++ b/migration/ram.c >> @@ -3795,6 +3795,7 @@ static SaveVMHandlers savevm_ram_handlers = { >> .load_setup = ram_load_setup, >> .load_cleanup = ram_load_cleanup, >> .resume_prepare = ram_resume_prepare, >> + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, >> }; >> >> void ram_mig_init(void) >> diff --git a/migration/savevm.c b/migration/savevm.c >> index ce02b6b..ff1a46e 100644 >> --- a/migration/savevm.c >> +++ b/migration/savevm.c >> @@ -2680,6 +2680,65 @@ int qemu_load_device_state(QEMUFile *f) >> return 0; >> } >> >> +static QEMUFile *qf_file_open(const char *filename, int flags, int mode, >> + Error **errp) >> +{ >> + QIOChannel *ioc; >> + int fd = qemu_open(filename, flags, mode); >> + >> + if (fd < 0) { >> + error_setg_errno(errp, errno, "%s(%s)", __func__, filename); >> + return NULL; >> + } >> + >> + ioc = QIO_CHANNEL(qio_channel_file_new_fd(fd)); >> + >> + if (flags & O_WRONLY) { >> + return qemu_fopen_channel_output(ioc); >> + } >> + >> + return qemu_fopen_channel_input(ioc); >> +} >> + >> +void save_cpr_snapshot(const char *file, const char *mode, Error **errp) >> +{ >> + int ret = 0; >> + QEMUFile *f; >> + VMStateMode op; >> + >> + if (!strcmp(mode, "reboot")) { >> + op = VMS_REBOOT; >> + } else { >> + error_setg(errp, "cprsave: bad mode %s", mode); >> + return; >> + } >> + >> + f = qf_file_open(file, O_CREAT | O_WRONLY | O_TRUNC, 0600, errp); >> + if (!f) { >> + return; >> + } >> + >> + ret = global_state_store(); >> + if (ret) { >> + error_setg(errp, "Error saving global state"); >> + qemu_fclose(f); >> + return; >> + } >> + >> + vm_stop(RUN_STATE_SAVE_VM); >> + >> + ret = qemu_savevm_state(f, op, errp); >> + if ((ret < 0) && !*errp) { >> + error_setg(errp, "qemu_savevm_state failed"); >> + } > > just call qemu_save_device_state(f) there rather than introducing the > modes? > What you're doing is VERY similar to qmp_xen_save_devices_state and also > COLO's device state saving. > > (and also very similar to migration with the x-ignore-shared flag set). Good idea, calling qemu_save_device_state instead of qemu_savevm_state will factor out the steps that are specific to migration. I'll still need the mode, though, to exclude savevm_block_handlers, and maybe for other reasons. I'll try it. - Steve >> + qemu_fclose(f); >> + >> + if (op == VMS_REBOOT) { >> + no_shutdown = 0; >> + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); >> + } >> +} >> + [...]
On 9/25/2020 2:43 PM, Steven Sistare wrote: > On 9/11/2020 12:43 PM, Dr. David Alan Gilbert wrote: >> * Steve Sistare (steven.sistare@oracle.com) wrote: >>> To enable live reboot, provide the cprsave QMP command and the VMS_REBOOT >>> vmstate-saving operation, which saves the state of the virtual machine in a >>> simple file. >>> >>> Syntax: >>> {'command':'cprsave', 'data':{'file':'str', 'mode':'str'}} >>> >>> The mode argument must be 'reboot'. Additional modes will be defined in >>> the future. >>> >>> Unlike the savevm command, cprsave supports any type of guest image and >>> block device. cprsave stops the VM so that guest ram and block devices are >>> not modified after state is saved. Guest ram must be mapped to a persistent >>> memory file such as /dev/dax0.0. The ram object vmstate handler and block >>> device handler do not apply to VMS_REBOOT, so restrict them to VMS_MIGRATE >>> or VMS_SNAPSHOT. After cprsave completes successfully, qemu exits. >>> >>> After issuing cprsave, the caller may update qemu, update the host kernel, >>> reboot, start qemu using the same arguments as the original process, and >>> issue the cprload command to restore the guest. cprload is added by >>> subsequent patches. >>> >>> If the caller suspends the guest instead of stopping the VM, such as by >>> issuing guest-suspend-ram to the qemu guest agent, then cprsave and cprload >>> support guests with vfio devices. The guest drivers suspend methods flush >>> outstanding requests and re-initialize the devices, and thus there is no >>> device state to save and restore. >>> >>> Signed-off-by: Steve Sistare <steven.sistare@oracle.com> >>> Signed-off-by: Maran Wilson <maran.wilson@oracle.com> >> >> Going back a step; could you..... >> >>> --- >>> include/migration/vmstate.h | 1 + >>> include/sysemu/sysemu.h | 2 ++ >>> migration/block.c | 1 + >>> migration/ram.c | 1 + >>> migration/savevm.c | 59 +++++++++++++++++++++++++++++++++++++++++++++ >>> monitor/qmp-cmds.c | 6 +++++ >>> qapi/migration.json | 14 +++++++++++ >>> 7 files changed, 84 insertions(+) >>> >>> diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h >>> index fa575f9..c58551a 100644 >>> --- a/include/migration/vmstate.h >>> +++ b/include/migration/vmstate.h >>> @@ -161,6 +161,7 @@ typedef enum { >>> typedef enum { >>> VMS_MIGRATE = (1U << 1), >>> VMS_SNAPSHOT = (1U << 2), >>> + VMS_REBOOT = (1U << 3), >>> VMS_MODE_ALL = ~0U >>> } VMStateMode; >>> >>> diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h >>> index 4b6a5c4..6fe86e6 100644 >>> --- a/include/sysemu/sysemu.h >>> +++ b/include/sysemu/sysemu.h >>> @@ -24,6 +24,8 @@ extern bool machine_init_done; >>> void qemu_add_machine_init_done_notifier(Notifier *notify); >>> void qemu_remove_machine_init_done_notifier(Notifier *notify); >>> >>> +void save_cpr_snapshot(const char *file, const char *mode, Error **errp); >>> + >>> extern int autostart; >>> >>> typedef enum { >>> diff --git a/migration/block.c b/migration/block.c >>> index 737b649..a69accb 100644 >>> --- a/migration/block.c >>> +++ b/migration/block.c >>> @@ -1023,6 +1023,7 @@ static SaveVMHandlers savevm_block_handlers = { >>> .load_state = block_load, >>> .save_cleanup = block_migration_cleanup, >>> .is_active = block_is_active, >>> + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, >>> }; >>> >>> void blk_mig_init(void) >>> diff --git a/migration/ram.c b/migration/ram.c >>> index 76d4fee..f0d5d9f 100644 >>> --- a/migration/ram.c >>> +++ b/migration/ram.c >>> @@ -3795,6 +3795,7 @@ static SaveVMHandlers savevm_ram_handlers = { >>> .load_setup = ram_load_setup, >>> .load_cleanup = ram_load_cleanup, >>> .resume_prepare = ram_resume_prepare, >>> + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, >>> }; >>> >>> void ram_mig_init(void) >>> diff --git a/migration/savevm.c b/migration/savevm.c >>> index ce02b6b..ff1a46e 100644 >>> --- a/migration/savevm.c >>> +++ b/migration/savevm.c >>> @@ -2680,6 +2680,65 @@ int qemu_load_device_state(QEMUFile *f) >>> return 0; >>> } >>> >>> +static QEMUFile *qf_file_open(const char *filename, int flags, int mode, >>> + Error **errp) >>> +{ >>> + QIOChannel *ioc; >>> + int fd = qemu_open(filename, flags, mode); >>> + >>> + if (fd < 0) { >>> + error_setg_errno(errp, errno, "%s(%s)", __func__, filename); >>> + return NULL; >>> + } >>> + >>> + ioc = QIO_CHANNEL(qio_channel_file_new_fd(fd)); >>> + >>> + if (flags & O_WRONLY) { >>> + return qemu_fopen_channel_output(ioc); >>> + } >>> + >>> + return qemu_fopen_channel_input(ioc); >>> +} >>> + >>> +void save_cpr_snapshot(const char *file, const char *mode, Error **errp) >>> +{ >>> + int ret = 0; >>> + QEMUFile *f; >>> + VMStateMode op; >>> + >>> + if (!strcmp(mode, "reboot")) { >>> + op = VMS_REBOOT; >>> + } else { >>> + error_setg(errp, "cprsave: bad mode %s", mode); >>> + return; >>> + } >>> + >>> + f = qf_file_open(file, O_CREAT | O_WRONLY | O_TRUNC, 0600, errp); >>> + if (!f) { >>> + return; >>> + } >>> + >>> + ret = global_state_store(); >>> + if (ret) { >>> + error_setg(errp, "Error saving global state"); >>> + qemu_fclose(f); >>> + return; >>> + } >>> + >>> + vm_stop(RUN_STATE_SAVE_VM); >>> + >>> + ret = qemu_savevm_state(f, op, errp); >>> + if ((ret < 0) && !*errp) { >>> + error_setg(errp, "qemu_savevm_state failed"); >>> + } >> >> just call qemu_save_device_state(f) there rather than introducing the >> modes? >> What you're doing is VERY similar to qmp_xen_save_devices_state and also >> COLO's device state saving. >> >> (and also very similar to migration with the x-ignore-shared flag set). > > Good idea, calling qemu_save_device_state instead of qemu_savevm_state will factor > out the steps that are specific to migration. I'll still need the mode, though, > to exclude savevm_block_handlers, and maybe for other reasons. I'll try it. This works and is a keeper. I do not need mode to exclude savevm_block_handlers. However, I still need mode and mode_mask so my vfio vmstate handler is only applied for the VMS_RESTART mode. I could instead iterate through the vfio devices and do something special on save and load, but the mode_mask is cleaner and could have more uses in the future. Do you agree? - Steve >>> + qemu_fclose(f); >>> + >>> + if (op == VMS_REBOOT) { >>> + no_shutdown = 0; >>> + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); >>> + } >>> +} >>> + > [...] >
diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h index fa575f9..c58551a 100644 --- a/include/migration/vmstate.h +++ b/include/migration/vmstate.h @@ -161,6 +161,7 @@ typedef enum { typedef enum { VMS_MIGRATE = (1U << 1), VMS_SNAPSHOT = (1U << 2), + VMS_REBOOT = (1U << 3), VMS_MODE_ALL = ~0U } VMStateMode; diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index 4b6a5c4..6fe86e6 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -24,6 +24,8 @@ extern bool machine_init_done; void qemu_add_machine_init_done_notifier(Notifier *notify); void qemu_remove_machine_init_done_notifier(Notifier *notify); +void save_cpr_snapshot(const char *file, const char *mode, Error **errp); + extern int autostart; typedef enum { diff --git a/migration/block.c b/migration/block.c index 737b649..a69accb 100644 --- a/migration/block.c +++ b/migration/block.c @@ -1023,6 +1023,7 @@ static SaveVMHandlers savevm_block_handlers = { .load_state = block_load, .save_cleanup = block_migration_cleanup, .is_active = block_is_active, + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, }; void blk_mig_init(void) diff --git a/migration/ram.c b/migration/ram.c index 76d4fee..f0d5d9f 100644 --- a/migration/ram.c +++ b/migration/ram.c @@ -3795,6 +3795,7 @@ static SaveVMHandlers savevm_ram_handlers = { .load_setup = ram_load_setup, .load_cleanup = ram_load_cleanup, .resume_prepare = ram_resume_prepare, + .mode_mask = VMS_MIGRATE | VMS_SNAPSHOT, }; void ram_mig_init(void) diff --git a/migration/savevm.c b/migration/savevm.c index ce02b6b..ff1a46e 100644 --- a/migration/savevm.c +++ b/migration/savevm.c @@ -2680,6 +2680,65 @@ int qemu_load_device_state(QEMUFile *f) return 0; } +static QEMUFile *qf_file_open(const char *filename, int flags, int mode, + Error **errp) +{ + QIOChannel *ioc; + int fd = qemu_open(filename, flags, mode); + + if (fd < 0) { + error_setg_errno(errp, errno, "%s(%s)", __func__, filename); + return NULL; + } + + ioc = QIO_CHANNEL(qio_channel_file_new_fd(fd)); + + if (flags & O_WRONLY) { + return qemu_fopen_channel_output(ioc); + } + + return qemu_fopen_channel_input(ioc); +} + +void save_cpr_snapshot(const char *file, const char *mode, Error **errp) +{ + int ret = 0; + QEMUFile *f; + VMStateMode op; + + if (!strcmp(mode, "reboot")) { + op = VMS_REBOOT; + } else { + error_setg(errp, "cprsave: bad mode %s", mode); + return; + } + + f = qf_file_open(file, O_CREAT | O_WRONLY | O_TRUNC, 0600, errp); + if (!f) { + return; + } + + ret = global_state_store(); + if (ret) { + error_setg(errp, "Error saving global state"); + qemu_fclose(f); + return; + } + + vm_stop(RUN_STATE_SAVE_VM); + + ret = qemu_savevm_state(f, op, errp); + if ((ret < 0) && !*errp) { + error_setg(errp, "qemu_savevm_state failed"); + } + qemu_fclose(f); + + if (op == VMS_REBOOT) { + no_shutdown = 0; + qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + int save_snapshot(const char *name, Error **errp) { BlockDriverState *bs, *bs1; diff --git a/monitor/qmp-cmds.c b/monitor/qmp-cmds.c index 864cbfa..9ec7b88 100644 --- a/monitor/qmp-cmds.c +++ b/monitor/qmp-cmds.c @@ -35,6 +35,7 @@ #include "qapi/qapi-commands-machine.h" #include "qapi/qapi-commands-misc.h" #include "qapi/qapi-commands-ui.h" +#include "qapi/qapi-commands-migration.h" #include "qapi/qmp/qerror.h" #include "hw/mem/memory-device.h" #include "hw/acpi/acpi_dev_interface.h" @@ -161,6 +162,11 @@ void qmp_cont(Error **errp) } } +void qmp_cprsave(const char *file, const char *mode, Error **errp) +{ + save_cpr_snapshot(file, mode, errp); +} + void qmp_system_wakeup(Error **errp) { if (!qemu_wakeup_suspend_enabled()) { diff --git a/qapi/migration.json b/qapi/migration.json index d500055..b61df1d 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -1621,3 +1621,17 @@ ## { 'event': 'UNPLUG_PRIMARY', 'data': { 'device-id': 'str' } } + +## +# @cprsave: +# +# Create a checkpoint of the virtual machine device state in @file. +# Guest RAM and guest block device blocks are not saved. +# +# @file: name of checkpoint file +# @mode: 'reboot' : checkpoint can be cprload'ed after a host kexec reboot. +# +# Since 5.0 +## +{ 'command': 'cprsave', 'data': { 'file': 'str', 'mode': 'str' } } +
To enable live reboot, provide the cprsave QMP command and the VMS_REBOOT vmstate-saving operation, which saves the state of the virtual machine in a simple file. Syntax: {'command':'cprsave', 'data':{'file':'str', 'mode':'str'}} The mode argument must be 'reboot'. Additional modes will be defined in the future. Unlike the savevm command, cprsave supports any type of guest image and block device. cprsave stops the VM so that guest ram and block devices are not modified after state is saved. Guest ram must be mapped to a persistent memory file such as /dev/dax0.0. The ram object vmstate handler and block device handler do not apply to VMS_REBOOT, so restrict them to VMS_MIGRATE or VMS_SNAPSHOT. After cprsave completes successfully, qemu exits. After issuing cprsave, the caller may update qemu, update the host kernel, reboot, start qemu using the same arguments as the original process, and issue the cprload command to restore the guest. cprload is added by subsequent patches. If the caller suspends the guest instead of stopping the VM, such as by issuing guest-suspend-ram to the qemu guest agent, then cprsave and cprload support guests with vfio devices. The guest drivers suspend methods flush outstanding requests and re-initialize the devices, and thus there is no device state to save and restore. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Signed-off-by: Maran Wilson <maran.wilson@oracle.com> --- include/migration/vmstate.h | 1 + include/sysemu/sysemu.h | 2 ++ migration/block.c | 1 + migration/ram.c | 1 + migration/savevm.c | 59 +++++++++++++++++++++++++++++++++++++++++++++ monitor/qmp-cmds.c | 6 +++++ qapi/migration.json | 14 +++++++++++ 7 files changed, 84 insertions(+)