diff mbox series

[v4,01/20] dt-bindings: arm: hisilicon: split the dt-bindings of each controller into a separate file

Message ID 20200928151324.2134-2-thunder.leizhen@huawei.com
State New
Headers show
Series add support for Hisilicon SD5203 SoC | expand

Commit Message

Leizhen (ThunderTown) Sept. 28, 2020, 3:13 p.m. UTC
Split the devicetree bindings of each Hisilicon controller from
hisilicon.txt into a separate file, the file name is the compatible name
attach the .txt file name extension.

All Hi6220 dedicated controllers are grouped into subdirectory "hi3620".
All HiPxx  dedicated controllers are grouped into subdirectory "hipxx"

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

---
 .../arm/hisilicon/controller/hisilicon,cpuctrl.txt |   8 +
 .../hisilicon/controller/hisilicon,dsa-subctrl.txt |  15 ++
 .../controller/hisilicon,hi3798cv200-perictrl.txt  |  21 ++
 .../controller/hisilicon,hi6220-aoctrl.txt         |  18 ++
 .../controller/hisilicon,hi6220-mediactrl.txt      |  18 ++
 .../controller/hisilicon,hi6220-pmctrl.txt         |  18 ++
 .../controller/hisilicon,hi6220-sramctrl.txt       |  16 ++
 .../controller/hisilicon,hi6220-sysctrl.txt        |  19 ++
 .../controller/hisilicon,hip01-sysctrl.txt         |  19 ++
 .../controller/hisilicon,hip04-bootwrapper.txt     |   9 +
 .../controller/hisilicon,hip04-fabric.txt          |   5 +
 .../controller/hisilicon,pcie-sas-subctrl.txt      |  15 ++
 .../arm/hisilicon/controller/hisilicon,pctrl.txt   |  13 +
 .../controller/hisilicon,peri-subctrl.txt          |  16 ++
 .../arm/hisilicon/controller/hisilicon,sysctrl.txt |  25 ++
 .../bindings/arm/hisilicon/hisilicon.txt           | 262 ---------------------
 16 files changed, 235 insertions(+), 262 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt

-- 
1.8.3

Comments

Rob Herring Sept. 28, 2020, 7:05 p.m. UTC | #1
On Mon, Sep 28, 2020 at 11:13:05PM +0800, Zhen Lei wrote:
> Split the devicetree bindings of each Hisilicon controller from

> hisilicon.txt into a separate file, the file name is the compatible name

> attach the .txt file name extension.

> 

> All Hi6220 dedicated controllers are grouped into subdirectory "hi3620".

> All HiPxx  dedicated controllers are grouped into subdirectory "hipxx"

> 

> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

> ---

>  .../arm/hisilicon/controller/hisilicon,cpuctrl.txt |   8 +

>  .../hisilicon/controller/hisilicon,dsa-subctrl.txt |  15 ++

>  .../controller/hisilicon,hi3798cv200-perictrl.txt  |  21 ++

>  .../controller/hisilicon,hi6220-aoctrl.txt         |  18 ++

>  .../controller/hisilicon,hi6220-mediactrl.txt      |  18 ++

>  .../controller/hisilicon,hi6220-pmctrl.txt         |  18 ++

>  .../controller/hisilicon,hi6220-sramctrl.txt       |  16 ++

>  .../controller/hisilicon,hi6220-sysctrl.txt        |  19 ++

>  .../controller/hisilicon,hip01-sysctrl.txt         |  19 ++

>  .../controller/hisilicon,hip04-bootwrapper.txt     |   9 +

>  .../controller/hisilicon,hip04-fabric.txt          |   5 +

>  .../controller/hisilicon,pcie-sas-subctrl.txt      |  15 ++

>  .../arm/hisilicon/controller/hisilicon,pctrl.txt   |  13 +

>  .../controller/hisilicon,peri-subctrl.txt          |  16 ++

>  .../arm/hisilicon/controller/hisilicon,sysctrl.txt |  25 ++

>  .../bindings/arm/hisilicon/hisilicon.txt           | 262 ---------------------

>  16 files changed, 235 insertions(+), 262 deletions(-)

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt

>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt

> 

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

> new file mode 100644

> index 000000000000000..ceffac537671668

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

> @@ -0,0 +1,8 @@

> +Hisilicon CPU controller

> +

> +Required properties:

> +- compatible : "hisilicon,cpuctrl"

> +- reg : Register address and size

> +

> +The clock registers and power registers of secondary cores are defined

> +in CPU controller, especially in HIX5HD2 SoC.

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

> new file mode 100644

> index 000000000000000..4d1c6abf03f6f97

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

> @@ -0,0 +1,15 @@

> +Hisilicon HiP05/HiP06 DSA sub system controller

> +

> +Required properties:

> +- compatible : "hisilicon,dsa-subctrl", "syscon";


This and others with only 'reg' can just be moved to syscon.yaml.

> +- reg : Register address and size

> +

> +The DSA sub system controller is shared by peripheral controllers in

> +HiP05 or HiP06 Soc to implement some basic configurations.

> +

> +Example:

> +	/* for HiP05 dsa sub system */

> +	pcie_sas: system_controller@a0000000 {

> +		compatible = "hisilicon,dsa-subctrl", "syscon";

> +		reg = <0xa0000000 0x10000>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt

> new file mode 100644

> index 000000000000000..0d5282f4670658d

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt

> @@ -0,0 +1,21 @@

> +Hisilicon Hi3798CV200 Peripheral Controller

> +

> +The Hi3798CV200 Peripheral Controller controls peripherals, queries

> +their status, and configures some functions of peripherals.

> +

> +Required properties:

> +- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"

> +  and "simple-mfd".

> +- reg: Register address and size of Peripheral Controller.

> +- #address-cells: Should be 1.

> +- #size-cells: Should be 1.

> +

> +Examples:

> +

> +	perictrl: peripheral-controller@8a20000 {

> +		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",

> +			     "simple-mfd";

> +		reg = <0x8a20000 0x1000>;

> +		#address-cells = <1>;

> +		#size-cells = <1>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt

> new file mode 100644

> index 000000000000000..5a723c1d45f4a17

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt

> @@ -0,0 +1,18 @@

> +Hisilicon Hi6220 Power Always ON domain controller

> +

> +Required properties:

> +- compatible : "hisilicon,hi6220-aoctrl"

> +- reg : Register address and size

> +- #clock-cells: should be set to 1, many clock registers are defined

> +  under this controller and this property must be present.

> +

> +Hisilicon designs this system controller to control the power always

> +on domain for mobile platform.

> +

> +Example:

> +	/*for Hi6220*/

> +	ao_ctrl: ao_ctrl@f7800000 {

> +		compatible = "hisilicon,hi6220-aoctrl", "syscon";

> +		reg = <0x0 0xf7800000 0x0 0x2000>;

> +		#clock-cells = <1>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt

> new file mode 100644

> index 000000000000000..dcfdcbcb6455771

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt

> @@ -0,0 +1,18 @@

> +Hisilicon Hi6220 Media domain controller

> +

> +Required properties:

> +- compatible : "hisilicon,hi6220-mediactrl"

> +- reg : Register address and size

> +- #clock-cells: should be set to 1, many clock registers are defined

> +  under this controller and this property must be present.

> +

> +Hisilicon designs this system controller to control the multimedia

> +domain(e.g. codec, G3D ...) for mobile platform.

> +

> +Example:

> +	/*for Hi6220*/

> +	media_ctrl: media_ctrl@f4410000 {

> +		compatible = "hisilicon,hi6220-mediactrl", "syscon";

> +		reg = <0x0 0xf4410000 0x0 0x1000>;

> +		#clock-cells = <1>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt

> new file mode 100644

> index 000000000000000..972842f07b5a2ce

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt

> @@ -0,0 +1,18 @@

> +Hisilicon Hi6220 Power Management domain controller

> +

> +Required properties:

> +- compatible : "hisilicon,hi6220-pmctrl"

> +- reg : Register address and size

> +- #clock-cells: should be set to 1, some clock registers are define

> +  under this controller and this property must be present.

> +

> +Hisilicon designs this system controller to control the power management

> +domain for mobile platform.

> +

> +Example:

> +	/*for Hi6220*/

> +	pm_ctrl: pm_ctrl@f7032000 {

> +		compatible = "hisilicon,hi6220-pmctrl", "syscon";

> +		reg = <0x0 0xf7032000 0x0 0x1000>;

> +		#clock-cells = <1>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt

> new file mode 100644

> index 000000000000000..086b7acccc5edc4

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt

> @@ -0,0 +1,16 @@

> +Hisilicon Hi6220 SRAM controller

> +

> +Required properties:

> +- compatible : "hisilicon,hi6220-sramctrl", "syscon"

> +- reg : Register address and size

> +

> +Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several

> +SRAM banks for power management, modem, security, etc. Further, use "syscon"

> +managing the common sram which can be shared by multiple modules.

> +

> +Example:

> +	/*for Hi6220*/

> +	sram: sram@fff80000 {

> +		compatible = "hisilicon,hi6220-sramctrl", "syscon";

> +		reg = <0x0 0xfff80000 0x0 0x12000>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt

> new file mode 100644

> index 000000000000000..07e318eda254f52

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt

> @@ -0,0 +1,19 @@

> +Hisilicon Hi6220 system controller

> +

> +Required properties:

> +- compatible : "hisilicon,hi6220-sysctrl"

> +- reg : Register address and size

> +- #clock-cells: should be set to 1, many clock registers are defined

> +  under this controller and this property must be present.

> +

> +Hisilicon designs this controller as one of the system controllers,

> +its main functions are the same as Hisilicon system controller, but

> +the register offset of some core modules are different.

> +

> +Example:

> +	/*for Hi6220*/

> +	sys_ctrl: sys_ctrl@f7030000 {

> +		compatible = "hisilicon,hi6220-sysctrl", "syscon";

> +		reg = <0x0 0xf7030000 0x0 0x2000>;

> +		#clock-cells = <1>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt

> new file mode 100644

> index 000000000000000..db2dfdce799db91

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt

> @@ -0,0 +1,19 @@

> +Hisilicon HiP01 system controller

> +

> +Required properties:

> +- compatible : "hisilicon,hip01-sysctrl"

> +- reg : Register address and size

> +

> +The HiP01 system controller is mostly compatible with hisilicon

> +system controller,but it has some specific control registers for

> +HIP01 SoC family, such as slave core boot, and also some same

> +registers located at different offset.

> +

> +Example:

> +

> +	/* for hip01-ca9x2 */

> +	sysctrl: system-controller@10000000 {

> +		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";

> +		reg = <0x10000000 0x1000>;

> +		reboot-offset = <0x4>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt

> new file mode 100644

> index 000000000000000..b0d53333f4fdae1

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt

> @@ -0,0 +1,9 @@

> +Bootwrapper boot method (software protocol on SMP):

> +

> +Required Properties:

> +- compatible: "hisilicon,hip04-bootwrapper";

> +- boot-method: Address and size of boot method.

> +  [0]: bootwrapper physical address

> +  [1]: bootwrapper size

> +  [2]: relocation physical address

> +  [3]: relocation size

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt

> new file mode 100644

> index 000000000000000..40453d02f2024bd

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt

> @@ -0,0 +1,5 @@

> +Fabric:

> +

> +Required Properties:

> +- compatible: "hisilicon,hip04-fabric";

> +- reg: Address and size of Fabric

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt

> new file mode 100644

> index 000000000000000..1ef086bda81a3f5

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt

> @@ -0,0 +1,15 @@

> +Hisilicon HiP05/HiP06 PCIe-SAS sub system controller

> +

> +Required properties:

> +- compatible : "hisilicon,pcie-sas-subctrl", "syscon";

> +- reg : Register address and size

> +

> +The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in

> +HiP05 or HiP06 Soc to implement some basic configurations.

> +

> +Example:

> +	/* for HiP05 PCIe-SAS sub system */

> +	pcie_sas: system_controller@b0000000 {

> +		compatible = "hisilicon,pcie-sas-subctrl", "syscon";

> +		reg = <0xb0000000 0x10000>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt

> new file mode 100644

> index 000000000000000..deec777bc3a850a

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt

> @@ -0,0 +1,13 @@

> +PCTRL: Peripheral misc control register

> +

> +Required Properties:

> +- compatible: "hisilicon,pctrl"

> +- reg: Address and size of pctrl.

> +

> +Example:

> +

> +	/* for Hi3620 */

> +	pctrl: pctrl@fca09000 {

> +		compatible = "hisilicon,pctrl";

> +		reg = <0xfca09000 0x1000>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt

> new file mode 100644

> index 000000000000000..b96c2896078b914

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt

> @@ -0,0 +1,16 @@

> +Hisilicon HiP05/HiP06 PERI sub system controller

> +

> +Required properties:

> +- compatible : "hisilicon,peri-subctrl", "syscon";

> +- reg : Register address and size

> +

> +The PERI sub system controller is shared by peripheral controllers in

> +HiP05 or HiP06 Soc to implement some basic configurations. The peripheral

> +controllers include mdio, ddr, iic, uart, timer and so on.

> +

> +Example:

> +	/* for HiP05 sub peri system */

> +	peri_c_subctrl: syscon@80000000 {

> +		compatible = "hisilicon,peri-subctrl", "syscon";

> +		reg = <0x0 0x80000000 0x0 0x10000>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt

> new file mode 100644

> index 000000000000000..963f7f1ca7a2f0c

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt

> @@ -0,0 +1,25 @@

> +Hisilicon system controller

> +

> +Required properties:

> +- compatible : "hisilicon,sysctrl"

> +- reg : Register address and size

> +

> +Optional properties:

> +- smp-offset : offset in sysctrl for notifying slave cpu booting

> +		cpu 1, reg;

> +		cpu 2, reg + 0x4;

> +		cpu 3, reg + 0x8;

> +		If reg value is not zero, cpun exit wfi and go

> +- resume-offset : offset in sysctrl for notifying cpu0 when resume

> +- reboot-offset : offset in sysctrl for system reboot

> +

> +Example:

> +

> +	/* for Hi3620 */

> +	sysctrl: system-controller@fc802000 {

> +		compatible = "hisilicon,sysctrl";

> +		reg = <0xfc802000 0x1000>;

> +		smp-offset = <0x31c>;

> +		resume-offset = <0x308>;

> +		reboot-offset = <0x4>;

> +	};

> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

> index a97f643e7d1c760..ffe760a636b5e7f 100644

> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

> @@ -55,265 +55,3 @@ Required root node properties:

>  HiP07 D05 Board

>  Required root node properties:

>  	- compatible = "hisilicon,hip07-d05";

> -

> -Hisilicon system controller

> -

> -Required properties:

> -- compatible : "hisilicon,sysctrl"

> -- reg : Register address and size

> -

> -Optional properties:

> -- smp-offset : offset in sysctrl for notifying slave cpu booting

> -		cpu 1, reg;

> -		cpu 2, reg + 0x4;

> -		cpu 3, reg + 0x8;

> -		If reg value is not zero, cpun exit wfi and go

> -- resume-offset : offset in sysctrl for notifying cpu0 when resume

> -- reboot-offset : offset in sysctrl for system reboot

> -

> -Example:

> -

> -	/* for Hi3620 */

> -	sysctrl: system-controller@fc802000 {

> -		compatible = "hisilicon,sysctrl";

> -		reg = <0xfc802000 0x1000>;

> -		smp-offset = <0x31c>;

> -		resume-offset = <0x308>;

> -		reboot-offset = <0x4>;

> -	};

> -

> ------------------------------------------------------------------------

> -Hisilicon Hi3798CV200 Peripheral Controller

> -

> -The Hi3798CV200 Peripheral Controller controls peripherals, queries

> -their status, and configures some functions of peripherals.

> -

> -Required properties:

> -- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"

> -  and "simple-mfd".

> -- reg: Register address and size of Peripheral Controller.

> -- #address-cells: Should be 1.

> -- #size-cells: Should be 1.

> -

> -Examples:

> -

> -	perictrl: peripheral-controller@8a20000 {

> -		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",

> -			     "simple-mfd";

> -		reg = <0x8a20000 0x1000>;

> -		#address-cells = <1>;

> -		#size-cells = <1>;

> -	};

> -

> ------------------------------------------------------------------------

> -Hisilicon Hi6220 system controller

> -

> -Required properties:

> -- compatible : "hisilicon,hi6220-sysctrl"

> -- reg : Register address and size

> -- #clock-cells: should be set to 1, many clock registers are defined

> -  under this controller and this property must be present.

> -

> -Hisilicon designs this controller as one of the system controllers,

> -its main functions are the same as Hisilicon system controller, but

> -the register offset of some core modules are different.

> -

> -Example:

> -	/*for Hi6220*/

> -	sys_ctrl: sys_ctrl@f7030000 {

> -		compatible = "hisilicon,hi6220-sysctrl", "syscon";

> -		reg = <0x0 0xf7030000 0x0 0x2000>;

> -		#clock-cells = <1>;

> -	};

> -

> -

> -Hisilicon Hi6220 Power Always ON domain controller

> -

> -Required properties:

> -- compatible : "hisilicon,hi6220-aoctrl"

> -- reg : Register address and size

> -- #clock-cells: should be set to 1, many clock registers are defined

> -  under this controller and this property must be present.

> -

> -Hisilicon designs this system controller to control the power always

> -on domain for mobile platform.

> -

> -Example:

> -	/*for Hi6220*/

> -	ao_ctrl: ao_ctrl@f7800000 {

> -		compatible = "hisilicon,hi6220-aoctrl", "syscon";

> -		reg = <0x0 0xf7800000 0x0 0x2000>;

> -		#clock-cells = <1>;

> -	};

> -

> -

> -Hisilicon Hi6220 Media domain controller

> -

> -Required properties:

> -- compatible : "hisilicon,hi6220-mediactrl"

> -- reg : Register address and size

> -- #clock-cells: should be set to 1, many clock registers are defined

> -  under this controller and this property must be present.

> -

> -Hisilicon designs this system controller to control the multimedia

> -domain(e.g. codec, G3D ...) for mobile platform.

> -

> -Example:

> -	/*for Hi6220*/

> -	media_ctrl: media_ctrl@f4410000 {

> -		compatible = "hisilicon,hi6220-mediactrl", "syscon";

> -		reg = <0x0 0xf4410000 0x0 0x1000>;

> -		#clock-cells = <1>;

> -	};

> -

> -

> -Hisilicon Hi6220 Power Management domain controller

> -

> -Required properties:

> -- compatible : "hisilicon,hi6220-pmctrl"

> -- reg : Register address and size

> -- #clock-cells: should be set to 1, some clock registers are define

> -  under this controller and this property must be present.

> -

> -Hisilicon designs this system controller to control the power management

> -domain for mobile platform.

> -

> -Example:

> -	/*for Hi6220*/

> -	pm_ctrl: pm_ctrl@f7032000 {

> -		compatible = "hisilicon,hi6220-pmctrl", "syscon";

> -		reg = <0x0 0xf7032000 0x0 0x1000>;

> -		#clock-cells = <1>;

> -	};

> -

> -

> -Hisilicon Hi6220 SRAM controller

> -

> -Required properties:

> -- compatible : "hisilicon,hi6220-sramctrl", "syscon"

> -- reg : Register address and size

> -

> -Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several

> -SRAM banks for power management, modem, security, etc. Further, use "syscon"

> -managing the common sram which can be shared by multiple modules.

> -

> -Example:

> -	/*for Hi6220*/

> -	sram: sram@fff80000 {

> -		compatible = "hisilicon,hi6220-sramctrl", "syscon";

> -		reg = <0x0 0xfff80000 0x0 0x12000>;

> -	};

> -

> ------------------------------------------------------------------------

> -Hisilicon HiP01 system controller

> -

> -Required properties:

> -- compatible : "hisilicon,hip01-sysctrl"

> -- reg : Register address and size

> -

> -The HiP01 system controller is mostly compatible with hisilicon

> -system controller,but it has some specific control registers for

> -HIP01 SoC family, such as slave core boot, and also some same

> -registers located at different offset.

> -

> -Example:

> -

> -	/* for hip01-ca9x2 */

> -	sysctrl: system-controller@10000000 {

> -		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";

> -		reg = <0x10000000 0x1000>;

> -		reboot-offset = <0x4>;

> -	};

> -

> ------------------------------------------------------------------------

> -Hisilicon HiP05/HiP06 PCIe-SAS sub system controller

> -

> -Required properties:

> -- compatible : "hisilicon,pcie-sas-subctrl", "syscon";

> -- reg : Register address and size

> -

> -The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in

> -HiP05 or HiP06 Soc to implement some basic configurations.

> -

> -Example:

> -	/* for HiP05 PCIe-SAS sub system */

> -	pcie_sas: system_controller@b0000000 {

> -		compatible = "hisilicon,pcie-sas-subctrl", "syscon";

> -		reg = <0xb0000000 0x10000>;

> -	};

> -

> -Hisilicon HiP05/HiP06 PERI sub system controller

> -

> -Required properties:

> -- compatible : "hisilicon,peri-subctrl", "syscon";

> -- reg : Register address and size

> -

> -The PERI sub system controller is shared by peripheral controllers in

> -HiP05 or HiP06 Soc to implement some basic configurations. The peripheral

> -controllers include mdio, ddr, iic, uart, timer and so on.

> -

> -Example:

> -	/* for HiP05 sub peri system */

> -	peri_c_subctrl: syscon@80000000 {

> -		compatible = "hisilicon,peri-subctrl", "syscon";

> -		reg = <0x0 0x80000000 0x0 0x10000>;

> -	};

> -

> -Hisilicon HiP05/HiP06 DSA sub system controller

> -

> -Required properties:

> -- compatible : "hisilicon,dsa-subctrl", "syscon";

> -- reg : Register address and size

> -

> -The DSA sub system controller is shared by peripheral controllers in

> -HiP05 or HiP06 Soc to implement some basic configurations.

> -

> -Example:

> -	/* for HiP05 dsa sub system */

> -	pcie_sas: system_controller@a0000000 {

> -		compatible = "hisilicon,dsa-subctrl", "syscon";

> -		reg = <0xa0000000 0x10000>;

> -	};

> -

> ------------------------------------------------------------------------

> -Hisilicon CPU controller

> -

> -Required properties:

> -- compatible : "hisilicon,cpuctrl"

> -- reg : Register address and size

> -

> -The clock registers and power registers of secondary cores are defined

> -in CPU controller, especially in HIX5HD2 SoC.

> -

> ------------------------------------------------------------------------

> -PCTRL: Peripheral misc control register

> -

> -Required Properties:

> -- compatible: "hisilicon,pctrl"

> -- reg: Address and size of pctrl.

> -

> -Example:

> -

> -	/* for Hi3620 */

> -	pctrl: pctrl@fca09000 {

> -		compatible = "hisilicon,pctrl";

> -		reg = <0xfca09000 0x1000>;

> -	};

> -

> ------------------------------------------------------------------------

> -Fabric:

> -

> -Required Properties:

> -- compatible: "hisilicon,hip04-fabric";

> -- reg: Address and size of Fabric

> -

> ------------------------------------------------------------------------

> -Bootwrapper boot method (software protocol on SMP):

> -

> -Required Properties:

> -- compatible: "hisilicon,hip04-bootwrapper";

> -- boot-method: Address and size of boot method.

> -  [0]: bootwrapper physical address

> -  [1]: bootwrapper size

> -  [2]: relocation physical address

> -  [3]: relocation size

> -- 

> 1.8.3

> 

>
Leizhen (ThunderTown) Sept. 29, 2020, 3:05 a.m. UTC | #2
On 2020/9/29 3:05, Rob Herring wrote:
> On Mon, Sep 28, 2020 at 11:13:05PM +0800, Zhen Lei wrote:

>> Split the devicetree bindings of each Hisilicon controller from

>> hisilicon.txt into a separate file, the file name is the compatible name

>> attach the .txt file name extension.

>>

>> All Hi6220 dedicated controllers are grouped into subdirectory "hi3620".

>> All HiPxx  dedicated controllers are grouped into subdirectory "hipxx"

>>

>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>

>> ---

>>  .../arm/hisilicon/controller/hisilicon,cpuctrl.txt |   8 +

>>  .../hisilicon/controller/hisilicon,dsa-subctrl.txt |  15 ++

>>  .../controller/hisilicon,hi3798cv200-perictrl.txt  |  21 ++

>>  .../controller/hisilicon,hi6220-aoctrl.txt         |  18 ++

>>  .../controller/hisilicon,hi6220-mediactrl.txt      |  18 ++

>>  .../controller/hisilicon,hi6220-pmctrl.txt         |  18 ++

>>  .../controller/hisilicon,hi6220-sramctrl.txt       |  16 ++

>>  .../controller/hisilicon,hi6220-sysctrl.txt        |  19 ++

>>  .../controller/hisilicon,hip01-sysctrl.txt         |  19 ++

>>  .../controller/hisilicon,hip04-bootwrapper.txt     |   9 +

>>  .../controller/hisilicon,hip04-fabric.txt          |   5 +

>>  .../controller/hisilicon,pcie-sas-subctrl.txt      |  15 ++

>>  .../arm/hisilicon/controller/hisilicon,pctrl.txt   |  13 +

>>  .../controller/hisilicon,peri-subctrl.txt          |  16 ++

>>  .../arm/hisilicon/controller/hisilicon,sysctrl.txt |  25 ++

>>  .../bindings/arm/hisilicon/hisilicon.txt           | 262 ---------------------

>>  16 files changed, 235 insertions(+), 262 deletions(-)

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt

>>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt

>>

>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

>> new file mode 100644

>> index 000000000000000..ceffac537671668

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt

>> @@ -0,0 +1,8 @@

>> +Hisilicon CPU controller

>> +

>> +Required properties:

>> +- compatible : "hisilicon,cpuctrl"

>> +- reg : Register address and size

>> +

>> +The clock registers and power registers of secondary cores are defined

>> +in CPU controller, especially in HIX5HD2 SoC.

>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

>> new file mode 100644

>> index 000000000000000..4d1c6abf03f6f97

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt

>> @@ -0,0 +1,15 @@

>> +Hisilicon HiP05/HiP06 DSA sub system controller

>> +

>> +Required properties:

>> +- compatible : "hisilicon,dsa-subctrl", "syscon";

> 

> This and others with only 'reg' can just be moved to syscon.yaml.


OK, I will do it.

> 

>> +- reg : Register address and size

>> +

>> +The DSA sub system controller is shared by peripheral controllers in

>> +HiP05 or HiP06 Soc to implement some basic configurations.

>> +

>> +Example:

>> +	/* for HiP05 dsa sub system */

>> +	pcie_sas: system_controller@a0000000 {

>> +		compatible = "hisilicon,dsa-subctrl", "syscon";

>> +		reg = <0xa0000000 0x10000>;

>> +	};


...

> 

> .

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
new file mode 100644
index 000000000000000..ceffac537671668
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,cpuctrl.txt
@@ -0,0 +1,8 @@ 
+Hisilicon CPU controller
+
+Required properties:
+- compatible : "hisilicon,cpuctrl"
+- reg : Register address and size
+
+The clock registers and power registers of secondary cores are defined
+in CPU controller, especially in HIX5HD2 SoC.
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
new file mode 100644
index 000000000000000..4d1c6abf03f6f97
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,dsa-subctrl.txt
@@ -0,0 +1,15 @@ 
+Hisilicon HiP05/HiP06 DSA sub system controller
+
+Required properties:
+- compatible : "hisilicon,dsa-subctrl", "syscon";
+- reg : Register address and size
+
+The DSA sub system controller is shared by peripheral controllers in
+HiP05 or HiP06 Soc to implement some basic configurations.
+
+Example:
+	/* for HiP05 dsa sub system */
+	pcie_sas: system_controller@a0000000 {
+		compatible = "hisilicon,dsa-subctrl", "syscon";
+		reg = <0xa0000000 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
new file mode 100644
index 000000000000000..0d5282f4670658d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi3798cv200-perictrl.txt
@@ -0,0 +1,21 @@ 
+Hisilicon Hi3798CV200 Peripheral Controller
+
+The Hi3798CV200 Peripheral Controller controls peripherals, queries
+their status, and configures some functions of peripherals.
+
+Required properties:
+- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
+  and "simple-mfd".
+- reg: Register address and size of Peripheral Controller.
+- #address-cells: Should be 1.
+- #size-cells: Should be 1.
+
+Examples:
+
+	perictrl: peripheral-controller@8a20000 {
+		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+			     "simple-mfd";
+		reg = <0x8a20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt
new file mode 100644
index 000000000000000..5a723c1d45f4a17
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-aoctrl.txt
@@ -0,0 +1,18 @@ 
+Hisilicon Hi6220 Power Always ON domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-aoctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+  under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power always
+on domain for mobile platform.
+
+Example:
+	/*for Hi6220*/
+	ao_ctrl: ao_ctrl@f7800000 {
+		compatible = "hisilicon,hi6220-aoctrl", "syscon";
+		reg = <0x0 0xf7800000 0x0 0x2000>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt
new file mode 100644
index 000000000000000..dcfdcbcb6455771
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-mediactrl.txt
@@ -0,0 +1,18 @@ 
+Hisilicon Hi6220 Media domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-mediactrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+  under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the multimedia
+domain(e.g. codec, G3D ...) for mobile platform.
+
+Example:
+	/*for Hi6220*/
+	media_ctrl: media_ctrl@f4410000 {
+		compatible = "hisilicon,hi6220-mediactrl", "syscon";
+		reg = <0x0 0xf4410000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt
new file mode 100644
index 000000000000000..972842f07b5a2ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-pmctrl.txt
@@ -0,0 +1,18 @@ 
+Hisilicon Hi6220 Power Management domain controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-pmctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, some clock registers are define
+  under this controller and this property must be present.
+
+Hisilicon designs this system controller to control the power management
+domain for mobile platform.
+
+Example:
+	/*for Hi6220*/
+	pm_ctrl: pm_ctrl@f7032000 {
+		compatible = "hisilicon,hi6220-pmctrl", "syscon";
+		reg = <0x0 0xf7032000 0x0 0x1000>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt
new file mode 100644
index 000000000000000..086b7acccc5edc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sramctrl.txt
@@ -0,0 +1,16 @@ 
+Hisilicon Hi6220 SRAM controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sramctrl", "syscon"
+- reg : Register address and size
+
+Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
+SRAM banks for power management, modem, security, etc. Further, use "syscon"
+managing the common sram which can be shared by multiple modules.
+
+Example:
+	/*for Hi6220*/
+	sram: sram@fff80000 {
+		compatible = "hisilicon,hi6220-sramctrl", "syscon";
+		reg = <0x0 0xfff80000 0x0 0x12000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt
new file mode 100644
index 000000000000000..07e318eda254f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hi6220-sysctrl.txt
@@ -0,0 +1,19 @@ 
+Hisilicon Hi6220 system controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sysctrl"
+- reg : Register address and size
+- #clock-cells: should be set to 1, many clock registers are defined
+  under this controller and this property must be present.
+
+Hisilicon designs this controller as one of the system controllers,
+its main functions are the same as Hisilicon system controller, but
+the register offset of some core modules are different.
+
+Example:
+	/*for Hi6220*/
+	sys_ctrl: sys_ctrl@f7030000 {
+		compatible = "hisilicon,hi6220-sysctrl", "syscon";
+		reg = <0x0 0xf7030000 0x0 0x2000>;
+		#clock-cells = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt
new file mode 100644
index 000000000000000..db2dfdce799db91
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip01-sysctrl.txt
@@ -0,0 +1,19 @@ 
+Hisilicon HiP01 system controller
+
+Required properties:
+- compatible : "hisilicon,hip01-sysctrl"
+- reg : Register address and size
+
+The HiP01 system controller is mostly compatible with hisilicon
+system controller,but it has some specific control registers for
+HIP01 SoC family, such as slave core boot, and also some same
+registers located at different offset.
+
+Example:
+
+	/* for hip01-ca9x2 */
+	sysctrl: system-controller@10000000 {
+		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+		reg = <0x10000000 0x1000>;
+		reboot-offset = <0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt
new file mode 100644
index 000000000000000..b0d53333f4fdae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-bootwrapper.txt
@@ -0,0 +1,9 @@ 
+Bootwrapper boot method (software protocol on SMP):
+
+Required Properties:
+- compatible: "hisilicon,hip04-bootwrapper";
+- boot-method: Address and size of boot method.
+  [0]: bootwrapper physical address
+  [1]: bootwrapper size
+  [2]: relocation physical address
+  [3]: relocation size
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt
new file mode 100644
index 000000000000000..40453d02f2024bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,hip04-fabric.txt
@@ -0,0 +1,5 @@ 
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
new file mode 100644
index 000000000000000..1ef086bda81a3f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pcie-sas-subctrl.txt
@@ -0,0 +1,15 @@ 
+Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
+
+Required properties:
+- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
+- reg : Register address and size
+
+The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
+HiP05 or HiP06 Soc to implement some basic configurations.
+
+Example:
+	/* for HiP05 PCIe-SAS sub system */
+	pcie_sas: system_controller@b0000000 {
+		compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+		reg = <0xb0000000 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
new file mode 100644
index 000000000000000..deec777bc3a850a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,pctrl.txt
@@ -0,0 +1,13 @@ 
+PCTRL: Peripheral misc control register
+
+Required Properties:
+- compatible: "hisilicon,pctrl"
+- reg: Address and size of pctrl.
+
+Example:
+
+	/* for Hi3620 */
+	pctrl: pctrl@fca09000 {
+		compatible = "hisilicon,pctrl";
+		reg = <0xfca09000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
new file mode 100644
index 000000000000000..b96c2896078b914
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,peri-subctrl.txt
@@ -0,0 +1,16 @@ 
+Hisilicon HiP05/HiP06 PERI sub system controller
+
+Required properties:
+- compatible : "hisilicon,peri-subctrl", "syscon";
+- reg : Register address and size
+
+The PERI sub system controller is shared by peripheral controllers in
+HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
+controllers include mdio, ddr, iic, uart, timer and so on.
+
+Example:
+	/* for HiP05 sub peri system */
+	peri_c_subctrl: syscon@80000000 {
+		compatible = "hisilicon,peri-subctrl", "syscon";
+		reg = <0x0 0x80000000 0x0 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt
new file mode 100644
index 000000000000000..963f7f1ca7a2f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hisilicon,sysctrl.txt
@@ -0,0 +1,25 @@ 
+Hisilicon system controller
+
+Required properties:
+- compatible : "hisilicon,sysctrl"
+- reg : Register address and size
+
+Optional properties:
+- smp-offset : offset in sysctrl for notifying slave cpu booting
+		cpu 1, reg;
+		cpu 2, reg + 0x4;
+		cpu 3, reg + 0x8;
+		If reg value is not zero, cpun exit wfi and go
+- resume-offset : offset in sysctrl for notifying cpu0 when resume
+- reboot-offset : offset in sysctrl for system reboot
+
+Example:
+
+	/* for Hi3620 */
+	sysctrl: system-controller@fc802000 {
+		compatible = "hisilicon,sysctrl";
+		reg = <0xfc802000 0x1000>;
+		smp-offset = <0x31c>;
+		resume-offset = <0x308>;
+		reboot-offset = <0x4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index a97f643e7d1c760..ffe760a636b5e7f 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -55,265 +55,3 @@  Required root node properties:
 HiP07 D05 Board
 Required root node properties:
 	- compatible = "hisilicon,hip07-d05";
-
-Hisilicon system controller
-
-Required properties:
-- compatible : "hisilicon,sysctrl"
-- reg : Register address and size
-
-Optional properties:
-- smp-offset : offset in sysctrl for notifying slave cpu booting
-		cpu 1, reg;
-		cpu 2, reg + 0x4;
-		cpu 3, reg + 0x8;
-		If reg value is not zero, cpun exit wfi and go
-- resume-offset : offset in sysctrl for notifying cpu0 when resume
-- reboot-offset : offset in sysctrl for system reboot
-
-Example:
-
-	/* for Hi3620 */
-	sysctrl: system-controller@fc802000 {
-		compatible = "hisilicon,sysctrl";
-		reg = <0xfc802000 0x1000>;
-		smp-offset = <0x31c>;
-		resume-offset = <0x308>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi3798CV200 Peripheral Controller
-
-The Hi3798CV200 Peripheral Controller controls peripherals, queries
-their status, and configures some functions of peripherals.
-
-Required properties:
-- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon"
-  and "simple-mfd".
-- reg: Register address and size of Peripheral Controller.
-- #address-cells: Should be 1.
-- #size-cells: Should be 1.
-
-Examples:
-
-	perictrl: peripheral-controller@8a20000 {
-		compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
-			     "simple-mfd";
-		reg = <0x8a20000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
------------------------------------------------------------------------
-Hisilicon Hi6220 system controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sysctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this controller as one of the system controllers,
-its main functions are the same as Hisilicon system controller, but
-the register offset of some core modules are different.
-
-Example:
-	/*for Hi6220*/
-	sys_ctrl: sys_ctrl@f7030000 {
-		compatible = "hisilicon,hi6220-sysctrl", "syscon";
-		reg = <0x0 0xf7030000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Always ON domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-aoctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power always
-on domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	ao_ctrl: ao_ctrl@f7800000 {
-		compatible = "hisilicon,hi6220-aoctrl", "syscon";
-		reg = <0x0 0xf7800000 0x0 0x2000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Media domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-mediactrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, many clock registers are defined
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the multimedia
-domain(e.g. codec, G3D ...) for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	media_ctrl: media_ctrl@f4410000 {
-		compatible = "hisilicon,hi6220-mediactrl", "syscon";
-		reg = <0x0 0xf4410000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 Power Management domain controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-pmctrl"
-- reg : Register address and size
-- #clock-cells: should be set to 1, some clock registers are define
-  under this controller and this property must be present.
-
-Hisilicon designs this system controller to control the power management
-domain for mobile platform.
-
-Example:
-	/*for Hi6220*/
-	pm_ctrl: pm_ctrl@f7032000 {
-		compatible = "hisilicon,hi6220-pmctrl", "syscon";
-		reg = <0x0 0xf7032000 0x0 0x1000>;
-		#clock-cells = <1>;
-	};
-
-
-Hisilicon Hi6220 SRAM controller
-
-Required properties:
-- compatible : "hisilicon,hi6220-sramctrl", "syscon"
-- reg : Register address and size
-
-Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
-SRAM banks for power management, modem, security, etc. Further, use "syscon"
-managing the common sram which can be shared by multiple modules.
-
-Example:
-	/*for Hi6220*/
-	sram: sram@fff80000 {
-		compatible = "hisilicon,hi6220-sramctrl", "syscon";
-		reg = <0x0 0xfff80000 0x0 0x12000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP01 system controller
-
-Required properties:
-- compatible : "hisilicon,hip01-sysctrl"
-- reg : Register address and size
-
-The HiP01 system controller is mostly compatible with hisilicon
-system controller,but it has some specific control registers for
-HIP01 SoC family, such as slave core boot, and also some same
-registers located at different offset.
-
-Example:
-
-	/* for hip01-ca9x2 */
-	sysctrl: system-controller@10000000 {
-		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
-		reg = <0x10000000 0x1000>;
-		reboot-offset = <0x4>;
-	};
-
------------------------------------------------------------------------
-Hisilicon HiP05/HiP06 PCIe-SAS sub system controller
-
-Required properties:
-- compatible : "hisilicon,pcie-sas-subctrl", "syscon";
-- reg : Register address and size
-
-The PCIe-SAS sub system controller is shared by PCIe and SAS controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 PCIe-SAS sub system */
-	pcie_sas: system_controller@b0000000 {
-		compatible = "hisilicon,pcie-sas-subctrl", "syscon";
-		reg = <0xb0000000 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 PERI sub system controller
-
-Required properties:
-- compatible : "hisilicon,peri-subctrl", "syscon";
-- reg : Register address and size
-
-The PERI sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations. The peripheral
-controllers include mdio, ddr, iic, uart, timer and so on.
-
-Example:
-	/* for HiP05 sub peri system */
-	peri_c_subctrl: syscon@80000000 {
-		compatible = "hisilicon,peri-subctrl", "syscon";
-		reg = <0x0 0x80000000 0x0 0x10000>;
-	};
-
-Hisilicon HiP05/HiP06 DSA sub system controller
-
-Required properties:
-- compatible : "hisilicon,dsa-subctrl", "syscon";
-- reg : Register address and size
-
-The DSA sub system controller is shared by peripheral controllers in
-HiP05 or HiP06 Soc to implement some basic configurations.
-
-Example:
-	/* for HiP05 dsa sub system */
-	pcie_sas: system_controller@a0000000 {
-		compatible = "hisilicon,dsa-subctrl", "syscon";
-		reg = <0xa0000000 0x10000>;
-	};
-
------------------------------------------------------------------------
-Hisilicon CPU controller
-
-Required properties:
-- compatible : "hisilicon,cpuctrl"
-- reg : Register address and size
-
-The clock registers and power registers of secondary cores are defined
-in CPU controller, especially in HIX5HD2 SoC.
-
------------------------------------------------------------------------
-PCTRL: Peripheral misc control register
-
-Required Properties:
-- compatible: "hisilicon,pctrl"
-- reg: Address and size of pctrl.
-
-Example:
-
-	/* for Hi3620 */
-	pctrl: pctrl@fca09000 {
-		compatible = "hisilicon,pctrl";
-		reg = <0xfca09000 0x1000>;
-	};
-
------------------------------------------------------------------------
-Fabric:
-
-Required Properties:
-- compatible: "hisilicon,hip04-fabric";
-- reg: Address and size of Fabric
-
------------------------------------------------------------------------
-Bootwrapper boot method (software protocol on SMP):
-
-Required Properties:
-- compatible: "hisilicon,hip04-bootwrapper";
-- boot-method: Address and size of boot method.
-  [0]: bootwrapper physical address
-  [1]: bootwrapper size
-  [2]: relocation physical address
-  [3]: relocation size