| Message ID | 1615370138-5673-8-git-send-email-victor.liu@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand |
On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qm/qxp Control and Status Registers module. > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v4->v5: > * Newly introduced in v5. (Rob) > > .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++ > 1 file changed, 202 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > > diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > new file mode 100644 > index 00000000..0e724d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > @@ -0,0 +1,202 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + As a system controller, the Freescale i.MX8qm/qxp Control and Status > + Registers(CSR) module represents a set of miscellaneous registers of a > + specific subsystem. It may provide control and/or status report interfaces > + to a mix of standalone hardware devices within that subsystem. One typical > + use-case is for some other nodes to acquire a reference to the syscon node > + by phandle, and the other typical use-case is that the operating system > + should consider all subnodes of the CSR module as separate child devices. > + > +select: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx8qxp-mipi-lvds-csr > + - fsl,imx8qm-lvds-csr You shouldn't need this, we filter out 'syscon' and 'simple-mfd'. > + required: > + - compatible > + > +properties: > + $nodename: > + pattern: "^syscon@[0-9a-f]+$" > + > + compatible: > + items: > + - enum: > + - fsl,imx8qxp-mipi-lvds-csr > + - fsl,imx8qm-lvds-csr > + - const: syscon > + - const: simple-mfd > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + const: ipg > + > +patternProperties: > + "^(ldb|phy|pxl2dpi)$": > + type: object > + description: The possible child devices of the CSR module. > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx8qxp-mipi-lvds-csr > + then: > + required: > + - pxl2dpi > + - ldb > + > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx8qm-lvds-csr > + then: > + required: > + - phy > + - ldb > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8-lpcg.h> > + #include <dt-bindings/firmware/imx/rsrc.h> > + mipi_lvds_0_csr: syscon@56221000 { > + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; > + reg = <0x56221000 0x1000>; > + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; > + clock-names = "ipg"; > + > + mipi_lvds_0_pxl2dpi: pxl2dpi { > + compatible = "fsl,imx8qxp-pxl2dpi"; > + fsl,sc-resource = <IMX_SC_R_MIPI_0>; > + power-domains = <&pd IMX_SC_R_MIPI_0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; > + }; > + > + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; > + }; > + }; > + > + port@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; > + }; > + > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { > + reg = <1>; > + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; > + }; > + }; > + }; > + }; > + > + mipi_lvds_0_ldb: ldb { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8qxp-ldb"; > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > + clock-names = "pixel", "bypass"; > + power-domains = <&pd IMX_SC_R_LVDS_0>; > + > + channel@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + /* ... */ > + }; > + }; > + > + channel@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + /* ... */ > + }; > + }; > + }; > + }; > + > + mipi_lvds_0_phy: phy@56228300 { > + compatible = "fsl,imx8qxp-mipi-dphy"; > + reg = <0x56228300 0x100>; > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; > + clock-names = "phy_ref"; > + #phy-cells = <0>; > + fsl,syscon = <&mipi_lvds_0_csr>; > + power-domains = <&pd IMX_SC_R_MIPI_0>; > + }; > -- > 2.7.4 >
On Tue, 2021-03-16 at 16:38 -0600, Rob Herring wrote: > On Wed, Mar 10, 2021 at 05:55:31PM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qm/qxp Control and Status Registers module. > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > v4->v5: > > * Newly introduced in v5. (Rob) > > > > .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++ > > 1 file changed, 202 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > > > > diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > > new file mode 100644 > > index 00000000..0e724d9 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml > > @@ -0,0 +1,202 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fmfd%2Ffsl%2Cimx8qxp-csr.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C8ee75a0dde484a3d221608d8e8cc47f6%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637515311382184508%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=fkym85OLtd5cA%2FdwJkXUbiR0EwkZX4yP4INsAaCywUo%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7C8ee75a0dde484a3d221608d8e8cc47f6%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637515311382184508%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=3n2mTxsUNF480D9xQQuXj7U0noiLCUBT3zneyWPr6ck%3D&reserved=0 > > + > > +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings > > + > > +maintainers: > > + - Liu Ying <victor.liu@nxp.com> > > + > > +description: | > > + As a system controller, the Freescale i.MX8qm/qxp Control and Status > > + Registers(CSR) module represents a set of miscellaneous registers of a > > + specific subsystem. It may provide control and/or status report interfaces > > + to a mix of standalone hardware devices within that subsystem. One typical > > + use-case is for some other nodes to acquire a reference to the syscon node > > + by phandle, and the other typical use-case is that the operating system > > + should consider all subnodes of the CSR module as separate child devices. > > + > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - fsl,imx8qxp-mipi-lvds-csr > > + - fsl,imx8qm-lvds-csr > > You shouldn't need this, we filter out 'syscon' and 'simple-mfd'. Will drop this in next version. Thanks. Liu Ying > > > + required: > > + - compatible > > + > > +properties: > > + $nodename: > > + pattern: "^syscon@[0-9a-f]+$" > > + > > + compatible: > > + items: > > + - enum: > > + - fsl,imx8qxp-mipi-lvds-csr > > + - fsl,imx8qm-lvds-csr > > + - const: syscon > > + - const: simple-mfd > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + const: ipg > > + > > +patternProperties: > > + "^(ldb|phy|pxl2dpi)$": > > + type: object > > + description: The possible child devices of the CSR module. > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: fsl,imx8qxp-mipi-lvds-csr > > + then: > > + required: > > + - pxl2dpi > > + - ldb > > + > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: fsl,imx8qm-lvds-csr > > + then: > > + required: > > + - phy > > + - ldb > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/imx8-lpcg.h> > > + #include <dt-bindings/firmware/imx/rsrc.h> > > + mipi_lvds_0_csr: syscon@56221000 { > > + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; > > + reg = <0x56221000 0x1000>; > > + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; > > + clock-names = "ipg"; > > + > > + mipi_lvds_0_pxl2dpi: pxl2dpi { > > + compatible = "fsl,imx8qxp-pxl2dpi"; > > + fsl,sc-resource = <IMX_SC_R_MIPI_0>; > > + power-domains = <&pd IMX_SC_R_MIPI_0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + > > + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; > > + }; > > + > > + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; > > + }; > > + }; > > + > > + port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + > > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; > > + }; > > + > > + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { > > + reg = <1>; > > + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; > > + }; > > + }; > > + }; > > + }; > > + > > + mipi_lvds_0_ldb: ldb { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "fsl,imx8qxp-ldb"; > > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > > + clock-names = "pixel", "bypass"; > > + power-domains = <&pd IMX_SC_R_LVDS_0>; > > + > > + channel@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + /* ... */ > > + }; > > + }; > > + > > + channel@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + /* ... */ > > + }; > > + }; > > + }; > > + }; > > + > > + mipi_lvds_0_phy: phy@56228300 { > > + compatible = "fsl,imx8qxp-mipi-dphy"; > > + reg = <0x56228300 0x100>; > > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; > > + clock-names = "phy_ref"; > > + #phy-cells = <0>; > > + fsl,syscon = <&mipi_lvds_0_csr>; > > + power-domains = <&pd IMX_SC_R_MIPI_0>; > > + }; > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml new file mode 100644 index 00000000..0e724d9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + As a system controller, the Freescale i.MX8qm/qxp Control and Status + Registers(CSR) module represents a set of miscellaneous registers of a + specific subsystem. It may provide control and/or status report interfaces + to a mix of standalone hardware devices within that subsystem. One typical + use-case is for some other nodes to acquire a reference to the syscon node + by phandle, and the other typical use-case is that the operating system + should consider all subnodes of the CSR module as separate child devices. + +select: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-mipi-lvds-csr + - fsl,imx8qm-lvds-csr + required: + - compatible + +properties: + $nodename: + pattern: "^syscon@[0-9a-f]+$" + + compatible: + items: + - enum: + - fsl,imx8qxp-mipi-lvds-csr + - fsl,imx8qm-lvds-csr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: ipg + +patternProperties: + "^(ldb|phy|pxl2dpi)$": + type: object + description: The possible child devices of the CSR module. + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qxp-mipi-lvds-csr + then: + required: + - pxl2dpi + - ldb + + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-lvds-csr + then: + required: + - phy + - ldb + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + mipi_lvds_0_csr: syscon@56221000 { + compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; + reg = <0x56221000 0x1000>; + clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; + clock-names = "ipg"; + + mipi_lvds_0_pxl2dpi: pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + fsl,sc-resource = <IMX_SC_R_MIPI_0>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; + + mipi_lvds_0_ldb: ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + + port@1 { + reg = <1>; + + /* ... */ + }; + }; + }; + }; + + mipi_lvds_0_phy: phy@56228300 { + compatible = "fsl,imx8qxp-mipi-dphy"; + reg = <0x56228300 0x100>; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; + clock-names = "phy_ref"; + #phy-cells = <0>; + fsl,syscon = <&mipi_lvds_0_csr>; + power-domains = <&pd IMX_SC_R_MIPI_0>; + };
This patch adds bindings for i.MX8qm/qxp Control and Status Registers module. Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v4->v5: * Newly introduced in v5. (Rob) .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 202 +++++++++++++++++++++ 1 file changed, 202 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml