| Message ID | 20210519143700.27392-2-bhupesh.sharma@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Enable Qualcomm Crypto Engine on sm8250 | expand |
On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote: > Convert Qualcomm BAM DMA devicetree binding to YAML. > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: David S. Miller <davem@davemloft.net> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: dmaengine@vger.kernel.org > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: bhupesh.linux@gmail.com > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ > 2 files changed, 91 insertions(+), 50 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > deleted file mode 100644 > index cf5b9e44432c..000000000000 > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > +++ /dev/null > @@ -1,50 +0,0 @@ > -QCOM BAM DMA controller > - > -Required properties: > -- compatible: must be one of the following: > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > - * "qcom,bam-v1.7.0" for MSM8916 > -- reg: Address range for DMA registers > -- interrupts: Should contain the one interrupt shared by all channels > -- #dma-cells: must be <1>, the cell in the dmas property of the client device > - represents the channel number > -- clocks: required clock > -- clock-names: must contain "bam_clk" entry > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in > - the secure world. > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by > - remote proccessor i.e. execution environment. > -- num-channels : optional, indicates supported number of DMA channels in a > - remotely controlled bam. > -- qcom,num-ees : optional, indicates supported number of Execution Environments > - in a remotely controlled bam. > - > -Example: > - > - uart-bam: dma@f9984000 = { > - compatible = "qcom,bam-v1.4.0"; > - reg = <0xf9984000 0x15000>; > - interrupts = <0 94 0>; > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > - clock-names = "bam_clk"; > - #dma-cells = <1>; > - qcom,ee = <0>; > - }; > - > -DMA clients must use the format described in the dma.txt file, using a two cell > -specifier for each channel. > - > -Example: > - serial@f991e000 { > - compatible = "qcom,msm-uart"; > - reg = <0xf991e000 0x1000> > - <0xf9944000 0x19000>; > - interrupts = <0 108 0>; > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, > - <&gcc GCC_BLSP1_AHB_CLK>; > - clock-names = "core", "iface"; > - > - dmas = <&uart-bam 0>, <&uart-bam 1>; > - dma-names = "rx", "tx"; > - }; > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > new file mode 100644 > index 000000000000..173e4d7508a6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > @@ -0,0 +1,91 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: QCOM BAM DMA controller binding > + > +maintainers: > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > + > +description: | > + This document defines the binding for the BAM DMA controller > + found on Qualcomm parts. > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + compatible: > + enum: > + - qcom,bam-v1.4.0 > + - qcom,bam-v1.3.0 > + - qcom,bam-v1.7.0 Can we keep the SoC association please. > + > + reg: > + maxItems: 1 > + description: Address range of the DMA registers. Drop description. > + > + clocks: > + minItems: 1 > + maxItems: 8 > + > + clock-names: > + const: bam_clk This is going to fail if you try more than 1 clock. > + > + interrupts: > + maxItems: 1 > + description: Single interrupt line shared by all channels. Drop description > + > + num-channels: > + maxItems: 31 > + description: | > + Indicates supported number of DMA channels in a remotely controlled bam. > + > + "#dma-cells": > + const: 1 > + description: The single cell represents the channel index. > + > + qcom,ee: > + $ref: /schemas/types.yaml#/definitions/uint8 > + description: > + Indicates the active Execution Environment identifier (0-7) > + used in the secure world. > + enum: [0, 1, 2, 3, 4, 5, 6, 7] > + > + qcom,controlled-remotely: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Indicates that the bam is controlled by remote proccessor i.e. > + execution environment. > + > + qcom,num-ees: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Indicates supported number of Execution Environments in a > + remotely controlled bam. 0-2^32 is valid? > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - "#dma-cells" > + - qcom,ee > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,gcc-msm8974.h> > + dma-controller@f9984000 { > + compatible = "qcom,bam-v1.4.0"; > + reg = <0xf9984000 0x15000>; > + interrupts = <0 94 0>; > + clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > + clock-names = "bam_clk"; > + #dma-cells = <1>; > + qcom,ee = /bits/ 8 <0>; > + }; > -- > 2.31.1 >
Hi, On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote: > Convert Qualcomm BAM DMA devicetree binding to YAML. > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Andy Gross <agross@kernel.org> > Cc: Herbert Xu <herbert@gondor.apana.org.au> > Cc: David S. Miller <davem@davemloft.net> > Cc: Stephen Boyd <sboyd@kernel.org> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: dmaengine@vger.kernel.org > Cc: linux-clk@vger.kernel.org > Cc: linux-crypto@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: bhupesh.linux@gmail.com > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ > 2 files changed, 91 insertions(+), 50 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > deleted file mode 100644 > index cf5b9e44432c..000000000000 > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > +++ /dev/null > @@ -1,50 +0,0 @@ > -QCOM BAM DMA controller > - > -Required properties: > -- compatible: must be one of the following: > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > - * "qcom,bam-v1.7.0" for MSM8916 > -- reg: Address range for DMA registers > -- interrupts: Should contain the one interrupt shared by all channels > -- #dma-cells: must be <1>, the cell in the dmas property of the client device > - represents the channel number > -- clocks: required clock > -- clock-names: must contain "bam_clk" entry > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in > - the secure world. > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by > - remote proccessor i.e. execution environment. > -- num-channels : optional, indicates supported number of DMA channels in a > - remotely controlled bam. > -- qcom,num-ees : optional, indicates supported number of Execution Environments > - in a remotely controlled bam. > - > -Example: > - > - uart-bam: dma@f9984000 = { > - compatible = "qcom,bam-v1.4.0"; > - reg = <0xf9984000 0x15000>; > - interrupts = <0 94 0>; > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > - clock-names = "bam_clk"; > - #dma-cells = <1>; > - qcom,ee = <0>; > - }; > - > -DMA clients must use the format described in the dma.txt file, using a two cell > -specifier for each channel. > - > -Example: > - serial@f991e000 { > - compatible = "qcom,msm-uart"; > - reg = <0xf991e000 0x1000> > - <0xf9944000 0x19000>; > - interrupts = <0 108 0>; > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, > - <&gcc GCC_BLSP1_AHB_CLK>; > - clock-names = "core", "iface"; > - > - dmas = <&uart-bam 0>, <&uart-bam 1>; > - dma-names = "rx", "tx"; > - }; > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > new file mode 100644 > index 000000000000..173e4d7508a6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > @@ -0,0 +1,91 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: QCOM BAM DMA controller binding > + > +maintainers: > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > + > +description: | > + This document defines the binding for the BAM DMA controller > + found on Qualcomm parts. > + > +allOf: > + - $ref: "dma-controller.yaml#" > + > +properties: > + compatible: > + enum: > + - qcom,bam-v1.4.0 > + - qcom,bam-v1.3.0 > + - qcom,bam-v1.7.0 > + > + reg: > + maxItems: 1 > + description: Address range of the DMA registers. > + > + clocks: > + minItems: 1 > + maxItems: 8 > + > + clock-names: > + const: bam_clk > + > + interrupts: > + maxItems: 1 > + description: Single interrupt line shared by all channels. > + > + num-channels: > + maxItems: 31 maxItems doesn't seem right here, since num-channels isn't an array. Perhaps you meant maximum: 31? Can you check your bindings on the existing device trees with "make dtbs_check" and make sure that only reasonable errors remain? This fails on pretty much every device tree: arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: num-channels: [[31]] is too short From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > + description: | > + Indicates supported number of DMA channels in a remotely controlled bam. > + > + "#dma-cells": > + const: 1 > + description: The single cell represents the channel index. > + > + qcom,ee: > + $ref: /schemas/types.yaml#/definitions/uint8 > + description: > + Indicates the active Execution Environment identifier (0-7) > + used in the secure world. > + enum: [0, 1, 2, 3, 4, 5, 6, 7] > + bam_dma.c reads this as uint32 and all existing device tree specify it as uint32. I don't think adding the /bits/ 8 to all existing device trees is really worth it. arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: qcom,ee: missing size tag in [[1]] From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > + qcom,controlled-remotely: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Indicates that the bam is controlled by remote proccessor i.e. > + execution environment. > + > + qcom,num-ees: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Indicates supported number of Execution Environments in a > + remotely controlled bam. > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names clocks is often missing if qcom,controlled-remotely is set, e.g. slimbam: dma-controller@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; qcom,ee = <1>; qcom,num-ees = <2>; }; arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: 'clocks' is a required property From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: 'clock-names' is a required property From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml You might be able to encode this with an if: statement (clocks required if qcom,controlled-remotely not specified), not sure. Stephan
Hello Rob, Thanks for the review and sorry for the late reply. On Fri, 21 May 2021 at 07:13, Rob Herring <robh@kernel.org> wrote: > > On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote: > > Convert Qualcomm BAM DMA devicetree binding to YAML. > > > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > > Cc: David S. Miller <davem@davemloft.net> > > Cc: Stephen Boyd <sboyd@kernel.org> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: dmaengine@vger.kernel.org > > Cc: linux-clk@vger.kernel.org > > Cc: linux-crypto@vger.kernel.org > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: bhupesh.linux@gmail.com > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- > > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ > > 2 files changed, 91 insertions(+), 50 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > deleted file mode 100644 > > index cf5b9e44432c..000000000000 > > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > +++ /dev/null > > @@ -1,50 +0,0 @@ > > -QCOM BAM DMA controller > > - > > -Required properties: > > -- compatible: must be one of the following: > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > > - * "qcom,bam-v1.7.0" for MSM8916 > > -- reg: Address range for DMA registers > > -- interrupts: Should contain the one interrupt shared by all channels > > -- #dma-cells: must be <1>, the cell in the dmas property of the client device > > - represents the channel number > > -- clocks: required clock > > -- clock-names: must contain "bam_clk" entry > > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in > > - the secure world. > > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by > > - remote proccessor i.e. execution environment. > > -- num-channels : optional, indicates supported number of DMA channels in a > > - remotely controlled bam. > > -- qcom,num-ees : optional, indicates supported number of Execution Environments > > - in a remotely controlled bam. > > - > > -Example: > > - > > - uart-bam: dma@f9984000 = { > > - compatible = "qcom,bam-v1.4.0"; > > - reg = <0xf9984000 0x15000>; > > - interrupts = <0 94 0>; > > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > > - clock-names = "bam_clk"; > > - #dma-cells = <1>; > > - qcom,ee = <0>; > > - }; > > - > > -DMA clients must use the format described in the dma.txt file, using a two cell > > -specifier for each channel. > > - > > -Example: > > - serial@f991e000 { > > - compatible = "qcom,msm-uart"; > > - reg = <0xf991e000 0x1000> > > - <0xf9944000 0x19000>; > > - interrupts = <0 108 0>; > > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, > > - <&gcc GCC_BLSP1_AHB_CLK>; > > - clock-names = "core", "iface"; > > - > > - dmas = <&uart-bam 0>, <&uart-bam 1>; > > - dma-names = "rx", "tx"; > > - }; > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > new file mode 100644 > > index 000000000000..173e4d7508a6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > @@ -0,0 +1,91 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: QCOM BAM DMA controller binding > > + > > +maintainers: > > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > > + > > +description: | > > + This document defines the binding for the BAM DMA controller > > + found on Qualcomm parts. > > + > > +allOf: > > + - $ref: "dma-controller.yaml#" > > + > > +properties: > > + compatible: > > + enum: > > + - qcom,bam-v1.4.0 > > + - qcom,bam-v1.3.0 > > + - qcom,bam-v1.7.0 > > Can we keep the SoC association please. The original bam dma bindings are as per the underlying bam IP version, so I would prefer that we keep it this way for this series. Later on I can send a patchset to convert the bam DMA dt-bindings, dts and driver to work with 'SoC association' instead. > > + > > + reg: > > + maxItems: 1 > > + description: Address range of the DMA registers. > > Drop description. Sure. > > + > > + clocks: > > + minItems: 1 > > + maxItems: 8 > > + > > + clock-names: > > + const: bam_clk > > This is going to fail if you try more than 1 clock. Right, currently we have one clock, but I can recheck and make fixes in v4. > > + > > + interrupts: > > + maxItems: 1 > > + description: Single interrupt line shared by all channels. > > Drop description Ok. > > + > > + num-channels: > > + maxItems: 31 > > + description: | > > + Indicates supported number of DMA channels in a remotely controlled bam. > > + > > + "#dma-cells": > > + const: 1 > > + description: The single cell represents the channel index. > > + > > + qcom,ee: > > + $ref: /schemas/types.yaml#/definitions/uint8 > > + description: > > + Indicates the active Execution Environment identifier (0-7) > > + used in the secure world. > > + enum: [0, 1, 2, 3, 4, 5, 6, 7] > > + > > + qcom,controlled-remotely: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: > > + Indicates that the bam is controlled by remote proccessor i.e. > > + execution environment. > > + > > + qcom,num-ees: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Indicates supported number of Execution Environments in a > > + remotely controlled bam. > > 0-2^32 is valid? Oh, got it. Will fix it in v4. > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - clock-names > > + - "#dma-cells" > > + - qcom,ee > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/qcom,gcc-msm8974.h> > > + dma-controller@f9984000 { > > + compatible = "qcom,bam-v1.4.0"; > > + reg = <0xf9984000 0x15000>; > > + interrupts = <0 94 0>; > > + clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > > + clock-names = "bam_clk"; > > + #dma-cells = <1>; > > + qcom,ee = /bits/ 8 <0>; > > + }; > > -- > > 2.31.1 Thanks, Bhupesh
Hi Stephan, Thanks for the review. On Fri, 21 May 2021 at 13:41, Stephan Gerhold <stephan@gerhold.net> wrote: > > Hi, > > On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote: > > Convert Qualcomm BAM DMA devicetree binding to YAML. > > > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > > Cc: David S. Miller <davem@davemloft.net> > > Cc: Stephen Boyd <sboyd@kernel.org> > > Cc: Michael Turquette <mturquette@baylibre.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: dmaengine@vger.kernel.org > > Cc: linux-clk@vger.kernel.org > > Cc: linux-crypto@vger.kernel.org > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: bhupesh.linux@gmail.com > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- > > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ > > 2 files changed, 91 insertions(+), 50 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > deleted file mode 100644 > > index cf5b9e44432c..000000000000 > > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > +++ /dev/null > > @@ -1,50 +0,0 @@ > > -QCOM BAM DMA controller > > - > > -Required properties: > > -- compatible: must be one of the following: > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > > - * "qcom,bam-v1.7.0" for MSM8916 > > -- reg: Address range for DMA registers > > -- interrupts: Should contain the one interrupt shared by all channels > > -- #dma-cells: must be <1>, the cell in the dmas property of the client device > > - represents the channel number > > -- clocks: required clock > > -- clock-names: must contain "bam_clk" entry > > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in > > - the secure world. > > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by > > - remote proccessor i.e. execution environment. > > -- num-channels : optional, indicates supported number of DMA channels in a > > - remotely controlled bam. > > -- qcom,num-ees : optional, indicates supported number of Execution Environments > > - in a remotely controlled bam. > > - > > -Example: > > - > > - uart-bam: dma@f9984000 = { > > - compatible = "qcom,bam-v1.4.0"; > > - reg = <0xf9984000 0x15000>; > > - interrupts = <0 94 0>; > > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > > - clock-names = "bam_clk"; > > - #dma-cells = <1>; > > - qcom,ee = <0>; > > - }; > > - > > -DMA clients must use the format described in the dma.txt file, using a two cell > > -specifier for each channel. > > - > > -Example: > > - serial@f991e000 { > > - compatible = "qcom,msm-uart"; > > - reg = <0xf991e000 0x1000> > > - <0xf9944000 0x19000>; > > - interrupts = <0 108 0>; > > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, > > - <&gcc GCC_BLSP1_AHB_CLK>; > > - clock-names = "core", "iface"; > > - > > - dmas = <&uart-bam 0>, <&uart-bam 1>; > > - dma-names = "rx", "tx"; > > - }; > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > new file mode 100644 > > index 000000000000..173e4d7508a6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > @@ -0,0 +1,91 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: QCOM BAM DMA controller binding > > + > > +maintainers: > > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > > + > > +description: | > > + This document defines the binding for the BAM DMA controller > > + found on Qualcomm parts. > > + > > +allOf: > > + - $ref: "dma-controller.yaml#" > > + > > +properties: > > + compatible: > > + enum: > > + - qcom,bam-v1.4.0 > > + - qcom,bam-v1.3.0 > > + - qcom,bam-v1.7.0 > > + > > + reg: > > + maxItems: 1 > > + description: Address range of the DMA registers. > > + > > + clocks: > > + minItems: 1 > > + maxItems: 8 > > + > > + clock-names: > > + const: bam_clk > > + > > + interrupts: > > + maxItems: 1 > > + description: Single interrupt line shared by all channels. > > + > > + num-channels: > > + maxItems: 31 > > maxItems doesn't seem right here, since num-channels isn't an array. > Perhaps you meant maximum: 31? > > Can you check your bindings on the existing device trees with > "make dtbs_check" and make sure that only reasonable errors remain? > > This fails on pretty much every device tree: > > arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: num-channels: [[31]] is too short > From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml I did run "make dtbs_check" and I don't remember seeing the issues you reported. Hmm.. maybe I missed something. Let me recheck and fix issues in v4. > > + description: | > > + Indicates supported number of DMA channels in a remotely controlled bam. > > + > > + "#dma-cells": > > + const: 1 > > + description: The single cell represents the channel index. > > + > > + qcom,ee: > > + $ref: /schemas/types.yaml#/definitions/uint8 > > + description: > > + Indicates the active Execution Environment identifier (0-7) > > + used in the secure world. > > + enum: [0, 1, 2, 3, 4, 5, 6, 7] > > + > > bam_dma.c reads this as uint32 and all existing device tree specify it > as uint32. I don't think adding the /bits/ 8 to all existing device > trees is really worth it. > > arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: qcom,ee: missing size tag in [[1]] > From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml Ok. > > + qcom,controlled-remotely: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: > > + Indicates that the bam is controlled by remote proccessor i.e. > > + execution environment. > > + > > + qcom,num-ees: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Indicates supported number of Execution Environments in a > > + remotely controlled bam. > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - clock-names > > clocks is often missing if qcom,controlled-remotely is set, e.g. > > slimbam: dma-controller@9184000 { > compatible = "qcom,bam-v1.7.0"; > qcom,controlled-remotely; > reg = <0x09184000 0x32000>; > num-channels = <31>; > interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; > #dma-cells = <1>; > qcom,ee = <1>; > qcom,num-ees = <2>; > }; > > arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: 'clocks' is a required property > From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: dma-controller@9184000: 'clock-names' is a required property > From schema: Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > You might be able to encode this with an if: statement (clocks required > if qcom,controlled-remotely not specified), not sure. Ok. Thanks, Bhupesh
On Thu, Jun 3, 2021 at 9:27 PM Bhupesh Sharma <bhupesh.sharma@linaro.org> wrote: > > Hello Rob, > > Thanks for the review and sorry for the late reply. > > On Fri, 21 May 2021 at 07:13, Rob Herring <robh@kernel.org> wrote: > > > > On Wed, May 19, 2021 at 08:06:44PM +0530, Bhupesh Sharma wrote: > > > Convert Qualcomm BAM DMA devicetree binding to YAML. > > > > > > Cc: Thara Gopinath <thara.gopinath@linaro.org> > > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > > Cc: Rob Herring <robh+dt@kernel.org> > > > Cc: Andy Gross <agross@kernel.org> > > > Cc: Herbert Xu <herbert@gondor.apana.org.au> > > > Cc: David S. Miller <davem@davemloft.net> > > > Cc: Stephen Boyd <sboyd@kernel.org> > > > Cc: Michael Turquette <mturquette@baylibre.com> > > > Cc: Vinod Koul <vkoul@kernel.org> > > > Cc: dmaengine@vger.kernel.org > > > Cc: linux-clk@vger.kernel.org > > > Cc: linux-crypto@vger.kernel.org > > > Cc: devicetree@vger.kernel.org > > > Cc: linux-kernel@vger.kernel.org > > > Cc: bhupesh.linux@gmail.com > > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > > --- > > > .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- > > > .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ > > > 2 files changed, 91 insertions(+), 50 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > > create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > > deleted file mode 100644 > > > index cf5b9e44432c..000000000000 > > > --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt > > > +++ /dev/null > > > @@ -1,50 +0,0 @@ > > > -QCOM BAM DMA controller > > > - > > > -Required properties: > > > -- compatible: must be one of the following: > > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > > > - * "qcom,bam-v1.7.0" for MSM8916 > > > -- reg: Address range for DMA registers > > > -- interrupts: Should contain the one interrupt shared by all channels > > > -- #dma-cells: must be <1>, the cell in the dmas property of the client device > > > - represents the channel number > > > -- clocks: required clock > > > -- clock-names: must contain "bam_clk" entry > > > -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in > > > - the secure world. > > > -- qcom,controlled-remotely : optional, indicates that the bam is controlled by > > > - remote proccessor i.e. execution environment. > > > -- num-channels : optional, indicates supported number of DMA channels in a > > > - remotely controlled bam. > > > -- qcom,num-ees : optional, indicates supported number of Execution Environments > > > - in a remotely controlled bam. > > > - > > > -Example: > > > - > > > - uart-bam: dma@f9984000 = { > > > - compatible = "qcom,bam-v1.4.0"; > > > - reg = <0xf9984000 0x15000>; > > > - interrupts = <0 94 0>; > > > - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; > > > - clock-names = "bam_clk"; > > > - #dma-cells = <1>; > > > - qcom,ee = <0>; > > > - }; > > > - > > > -DMA clients must use the format described in the dma.txt file, using a two cell > > > -specifier for each channel. > > > - > > > -Example: > > > - serial@f991e000 { > > > - compatible = "qcom,msm-uart"; > > > - reg = <0xf991e000 0x1000> > > > - <0xf9944000 0x19000>; > > > - interrupts = <0 108 0>; > > > - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, > > > - <&gcc GCC_BLSP1_AHB_CLK>; > > > - clock-names = "core", "iface"; > > > - > > > - dmas = <&uart-bam 0>, <&uart-bam 1>; > > > - dma-names = "rx", "tx"; > > > - }; > > > diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > > new file mode 100644 > > > index 000000000000..173e4d7508a6 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml > > > @@ -0,0 +1,91 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: QCOM BAM DMA controller binding > > > + > > > +maintainers: > > > + - Bhupesh Sharma <bhupesh.sharma@linaro.org> > > > + > > > +description: | > > > + This document defines the binding for the BAM DMA controller > > > + found on Qualcomm parts. > > > + > > > +allOf: > > > + - $ref: "dma-controller.yaml#" > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - qcom,bam-v1.4.0 > > > + - qcom,bam-v1.3.0 > > > + - qcom,bam-v1.7.0 > > > > Can we keep the SoC association please. > > The original bam dma bindings are as per the underlying bam IP > version, so I would prefer that we keep it this way for this series. > > Later on I can send a patchset to convert the bam DMA dt-bindings, dts > and driver to work with 'SoC association' instead. I just mean keep a comment with the mapping of versions to SoC: > > > - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 > > > - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 > > > - * "qcom,bam-v1.7.0" for MSM8916 Otherwise, we are losing that information. Rob
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt deleted file mode 100644 index cf5b9e44432c..000000000000 --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt +++ /dev/null @@ -1,50 +0,0 @@ -QCOM BAM DMA controller - -Required properties: -- compatible: must be one of the following: - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084 - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960 - * "qcom,bam-v1.7.0" for MSM8916 -- reg: Address range for DMA registers -- interrupts: Should contain the one interrupt shared by all channels -- #dma-cells: must be <1>, the cell in the dmas property of the client device - represents the channel number -- clocks: required clock -- clock-names: must contain "bam_clk" entry -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in - the secure world. -- qcom,controlled-remotely : optional, indicates that the bam is controlled by - remote proccessor i.e. execution environment. -- num-channels : optional, indicates supported number of DMA channels in a - remotely controlled bam. -- qcom,num-ees : optional, indicates supported number of Execution Environments - in a remotely controlled bam. - -Example: - - uart-bam: dma@f9984000 = { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9984000 0x15000>; - interrupts = <0 94 0>; - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - -DMA clients must use the format described in the dma.txt file, using a two cell -specifier for each channel. - -Example: - serial@f991e000 { - compatible = "qcom,msm-uart"; - reg = <0xf991e000 0x1000> - <0xf9944000 0x19000>; - interrupts = <0 108 0>; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - - dmas = <&uart-bam 0>, <&uart-bam 1>; - dma-names = "rx", "tx"; - }; diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml new file mode 100644 index 000000000000..173e4d7508a6 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/qcom_bam_dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QCOM BAM DMA controller binding + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: | + This document defines the binding for the BAM DMA controller + found on Qualcomm parts. + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + enum: + - qcom,bam-v1.4.0 + - qcom,bam-v1.3.0 + - qcom,bam-v1.7.0 + + reg: + maxItems: 1 + description: Address range of the DMA registers. + + clocks: + minItems: 1 + maxItems: 8 + + clock-names: + const: bam_clk + + interrupts: + maxItems: 1 + description: Single interrupt line shared by all channels. + + num-channels: + maxItems: 31 + description: | + Indicates supported number of DMA channels in a remotely controlled bam. + + "#dma-cells": + const: 1 + description: The single cell represents the channel index. + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + Indicates the active Execution Environment identifier (0-7) + used in the secure world. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + qcom,controlled-remotely: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the bam is controlled by remote proccessor i.e. + execution environment. + + qcom,num-ees: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Indicates supported number of Execution Environments in a + remotely controlled bam. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - "#dma-cells" + - qcom,ee + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8974.h> + dma-controller@f9984000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9984000 0x15000>; + interrupts = <0 94 0>; + clocks = <&gcc GCC_BAM_DMA_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = /bits/ 8 <0>; + };
Convert Qualcomm BAM DMA devicetree binding to YAML. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: bhupesh.linux@gmail.com Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- .../devicetree/bindings/dma/qcom_bam_dma.txt | 50 ---------- .../devicetree/bindings/dma/qcom_bam_dma.yaml | 91 +++++++++++++++++++ 2 files changed, 91 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.yaml -- 2.31.1