| Message ID | 20210607113840.15435-9-bhupesh.sharma@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: Add SA8155p-adp board DTS | expand |
On 07-06-21, 17:08, Bhupesh Sharma wrote: > Add base DTS file for sa8155p-adp and enable boot to console, > tlmm reserved range and also include pmic file(s). I see ufs added too, pls mention that as well --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb I think this should go before sdm.. > + vdd_usb_hs_core: > + vdda_pll_hv_cc_ebi01: > + vdda_pll_hv_cc_ebi23: > + vdda_ufs_2ln_core: > + vdda_ufs_2ln_core: > + vdda_usb_ss_core: > + vdda_usb_ss_dp_core_1: > + vdda_usb_ss_dp_core_2: > + vdda_sp_sensor: > + vdda_qlink_lv: > + vdda_qlink_lv_ck: > + vdda_qrefs_0p875_5: I didnt find these labels very useful, so maybe remove? It helped me to understand that a regulator is vreg_l5a_0p88 as it implies I am using l5a with 0p88V :) > + vreg_l5a_0p88: ldo5 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; Pls do add regulator-name property, it helps in understanding which ldo in logs/debugfs, otherwise ldo5 will comes for both pmics -- ~Vinod
Hi Vinod, Thanks for your review. On Mon, 7 Jun 2021 at 20:52, Vinod Koul <vkoul@kernel.org> wrote: > > On 07-06-21, 17:08, Bhupesh Sharma wrote: > > Add base DTS file for sa8155p-adp and enable boot to console, > > tlmm reserved range and also include pmic file(s). > > I see ufs added too, pls mention that as well Oops, missed that. Will fix it in v2. > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > > I think this should go before sdm.. Oh, ok, I thought of keeping all boards based on sm8150 SoC together. But alphabetically, it makes more sense to put it earlier. > > + vdd_usb_hs_core: > > + vdda_pll_hv_cc_ebi01: > > + vdda_pll_hv_cc_ebi23: > > + vdda_ufs_2ln_core: > > + vdda_ufs_2ln_core: > > + vdda_usb_ss_core: > > + vdda_usb_ss_dp_core_1: > > + vdda_usb_ss_dp_core_2: > > + vdda_sp_sensor: > > + vdda_qlink_lv: > > + vdda_qlink_lv_ck: > > + vdda_qrefs_0p875_5: > > I didnt find these labels very useful, so maybe remove? > It helped me to understand that a regulator is vreg_l5a_0p88 as it > implies I am using l5a with 0p88V :) While a few labels like 'vdd_usb_hs_core' are used in this patch (for example) to denote 'vdda-pll-supply ' of 'usb_1_hsphy', the others would be required as we enable further on-boards peripherals in the dts. I will recheck and limit these further in v2. > > + vreg_l5a_0p88: ldo5 { > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > Pls do add regulator-name property, it helps in understanding which ldo > in logs/debugfs, otherwise ldo5 will comes for both pmics That's a good point. Will fix this in v2. Regards, Bhupesh > -- > ~Vinod
Hello Bjorn, On Fri, 11 Jun 2021 at 07:55, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Mon 07 Jun 06:38 CDT 2021, Bhupesh Sharma wrote: > > > Add base DTS file for sa8155p-adp and enable boot to console, > > Please spell out "sa8155-adp", i.e. "Add base DTS for SA8155p Automotive > Development Platform." Ok, will do. > > tlmm reserved range and also include pmic file(s). > > > > SA8155p-adp board is based on sm8150 Qualcomm Snapdragon SoC. > > > > It's not based on sm8150, it's based on sa8155p, so let's express this > as "The SA8155p platform is similar to the SM8150, so use this as base > for now", to document why we decided to do this. > > > Cc: Linus Walleij <linus.walleij@linaro.org> > > Cc: Liam Girdwood <lgirdwood@gmail.com> > > Cc: Mark Brown <broonie@kernel.org> > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Andy Gross <agross@kernel.org> > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > Cc: linux-gpio@vger.kernel.org > > Cc: bhupesh.linux@gmail.com > > This would go into the git history as "I specifically asked for input > from these people", so please keep this list shorter (but for a change > like this it's probably better to omit it completely) Ok, will keep it shorter for future series. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 363 +++++++++++++++++++++++ > > 2 files changed, 364 insertions(+) > > create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > > index 456502aeee49..38d3a4728871 100644 > > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb > > diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts > > new file mode 100644 > > index 000000000000..470d740e060a > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts > > @@ -0,0 +1,363 @@ > > +// SPDX-License-Identifier: BSD-3-Clause > > +/* > > + * Copyright (c) 2021, Linaro Limited > > + */ > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include "sm8150.dtsi" > > +#include "pmm8155au_1.dtsi" > > +#include "pmm8155au_2.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. SA8155P ADP"; > > + compatible = "qcom,sa8155p-adp"; > > + > > + aliases { > > + serial0 = &uart2; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:115200n8"; > > + }; > > + > > + vreg_3p3: vreg_3p3_regulator { > > + compatible = "regulator-fixed"; > > + regulator-name = "vreg_3p3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + }; > > + > > + /* > > + * Apparently RPMh does not provide support for PM8150 S4 because it > > + * is always-on; model it as a fixed regulator. > > + */ > > You can reduce this to > > /* S4A is always on and not controllable through RPMh */ > Ok, I wanted to keep it similar to the comment we have for sm815o-mtp, but this is fine as well. > > + vreg_s4a_1p8: smps4 { > > + compatible = "regulator-fixed"; > > + regulator-name = "vreg_s4a_1p8"; > > + > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + > > + regulator-always-on; > > + regulator-boot-on; > > + > > + vin-supply = <&vreg_3p3>; > > + }; > > +}; > > + > > +&apps_rsc { > > + pmm8155au-1-rpmh-regulators { > > + compatible = "qcom,pmm8155au-1-rpmh-regulators"; > > + qcom,pmic-id = "a"; > > + > > + vdd-s1-supply = <&vreg_3p3>; > > + vdd-s2-supply = <&vreg_3p3>; > > + vdd-s3-supply = <&vreg_3p3>; > > + vdd-s4-supply = <&vreg_3p3>; > > + vdd-s5-supply = <&vreg_3p3>; > > + vdd-s6-supply = <&vreg_3p3>; > > + vdd-s7-supply = <&vreg_3p3>; > > + vdd-s8-supply = <&vreg_3p3>; > > + vdd-s9-supply = <&vreg_3p3>; > > + vdd-s10-supply = <&vreg_3p3>; > > + > > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; > > + vdd-l2-l10-supply = <&vreg_3p3>; > > + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; > > + vdd-l6-l9-supply = <&vreg_s6a_0p92>; > > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; > > + vdd-l13-l16-l17-supply = <&vreg_3p3>; > > + > > + vreg_s5a_2p04: smps5 { > > + regulator-min-microvolt = <1904000>; > > + regulator-max-microvolt = <2000000>; > > + }; > > + > > + vreg_s6a_0p92: smps6 { > > + regulator-min-microvolt = <920000>; > > + regulator-max-microvolt = <1128000>; > > + }; > > + > > + vdda_wcss_pll: > > This is the "label" of the pad which the regulator typically is > connected to (rather than a denotion of which regulator it is). So even > though we have these in some of the other boards, I would prefer if you > skip them and only use the vreg_xyz_abc variant. Ok. > > + vreg_l1a_0p752: ldo1 { > > + regulator-min-microvolt = <752000>; > > + regulator-max-microvolt = <752000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > [..] > > +&usb_1_dwc3 { > > + dr_mode = "peripheral"; > > We have enough pieces to handle mode switching on this platform, but as > discussed, lets leave it as "peripheral" until your local setup is back > online. Sure, in later patches, I can try playing more with this configuration. Regards, Bhupesh
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 456502aeee49..38d3a4728871 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts new file mode 100644 index 000000000000..470d740e060a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pmm8155au_1.dtsi" +#include "pmm8155au_2.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SA8155P ADP"; + compatible = "qcom,sa8155p-adp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_3p3: vreg_3p3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vreg_3p3>; + }; +}; + +&apps_rsc { + pmm8155au-1-rpmh-regulators { + compatible = "qcom,pmm8155au-1-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>; + vdd-l6-l9-supply = <&vreg_s6a_0p92>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p92: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p752: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_usb_hs_3p1: + vreg_l2a_3p072: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_ufs_2ln_core: + vdda_ufs_2ln_core: + vdda_usb_ss_core: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_sp_sensor: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875_5: + vreg_l5a_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p96: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_usb_hs_1p8: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p96: ldo17 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmm8155au-2-rpmh-regulators { + compatible = "qcom,pmm8155au-2-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vreg_3p3>; + vdd-s2-supply = <&vreg_3p3>; + vdd-s3-supply = <&vreg_3p3>; + vdd-s4-supply = <&vreg_3p3>; + vdd-s5-supply = <&vreg_3p3>; + vdd-s6-supply = <&vreg_3p3>; + vdd-s7-supply = <&vreg_3p3>; + vdd-s8-supply = <&vreg_3p3>; + vdd-s9-supply = <&vreg_3p3>; + vdd-s10-supply = <&vreg_3p3>; + + vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>; + vdd-l2-l10-supply = <&vreg_3p3>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>; + vdd-l6-l9-supply = <&vreg_s6c_1p128>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>; + vdd-l13-l16-l17-supply = <&vreg_3p3>; + + vreg_s4c_1p352: smps4 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5c_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6c_1p128: smps6 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_2: + vreg_l1c_1p304: ldo1 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l2c_1p808: ldo2 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l5c_1p2: ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qlink_hv_ck: + vdda_pcie_1ln_pll_1p2: + vdda_pcie_2ln_pll_1p2: + vdda_hv_refgen0: + vdda_ufs_2ln_1p2: + vdda_usb_ss_1p2: + vdda_usb_ss_dp_1p2: + vdda_csi_1p2: + vdda_dsi_1p2: + vreg_l8c_1p2: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l12c_1p808: ldo12 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13c_2p96: ldo13 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15c_1p9: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16c_3p008: ldo16 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vreg_l18c_0p88: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p96>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l5c_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-max-microamp = <87100>; + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda-pll-max-microamp = <18300>; +}; + + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l8c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&qupv3_id_1 { + status = "okay"; +};
Add base DTS file for sa8155p-adp and enable boot to console, tlmm reserved range and also include pmic file(s). SA8155p-adp board is based on sm8150 Qualcomm Snapdragon SoC. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: bhupesh.linux@gmail.com Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 363 +++++++++++++++++++++++ 2 files changed, 364 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts -- 2.31.1