| Message ID | 20210524110920.24599-4-johan@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
On Mon, May 24, 2021 at 01:09:20PM +0200, Johan Hovold wrote: > The direction of the pipe argument must match the request-type direction > bit or control requests may fail depending on the host-controller-driver > implementation. > > Control transfers without a data stage are treated as OUT requests by > the USB stack and should be using usb_sndctrlpipe(). Failing to do so > will now trigger a warning. > > Fix the zero-length i2c-read request used for type detection by > attempting to read a single byte instead. > > Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com > Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") > Cc: stable@vger.kernel.org # 4.0 > Cc: Antti Palosaari <crope@iki.fi> > Signed-off-by: Johan Hovold <johan@kernel.org> > --- > drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > index 97ed17a141bb..2c04ed8af0e4 100644 > --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > @@ -612,8 +612,9 @@ static int rtl28xxu_read_config(struct dvb_usb_device *d) > static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name) > { > struct rtl28xxu_dev *dev = d_to_priv(d); > + u8 buf[1]; > int ret; > - struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL}; > + struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 1, buf}; > > dev_dbg(&d->intf->dev, "\n"); As reported here https://lore.kernel.org/r/YLSVsrhMZ2oOL1vM@hovoldconsulting.com this patch is causing the chip type to no longer be detected correctly, so please drop this one for now until this has been resolved. Johan
On Mon, May 31, 2021 at 09:55:39AM +0200, Johan Hovold wrote: > On Mon, May 24, 2021 at 01:09:20PM +0200, Johan Hovold wrote: > > The direction of the pipe argument must match the request-type direction > > bit or control requests may fail depending on the host-controller-driver > > implementation. > > > > Control transfers without a data stage are treated as OUT requests by > > the USB stack and should be using usb_sndctrlpipe(). Failing to do so > > will now trigger a warning. > > > > Fix the zero-length i2c-read request used for type detection by > > attempting to read a single byte instead. > > > > Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com > > Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") > > Cc: stable@vger.kernel.org # 4.0 > > Cc: Antti Palosaari <crope@iki.fi> > > Signed-off-by: Johan Hovold <johan@kernel.org> > > --- > > drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > > index 97ed17a141bb..2c04ed8af0e4 100644 > > --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > > +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c > > @@ -612,8 +612,9 @@ static int rtl28xxu_read_config(struct dvb_usb_device *d) > > static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name) > > { > > struct rtl28xxu_dev *dev = d_to_priv(d); > > + u8 buf[1]; > > int ret; > > - struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL}; > > + struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 1, buf}; > > > > dev_dbg(&d->intf->dev, "\n"); > > As reported here > > https://lore.kernel.org/r/YLSVsrhMZ2oOL1vM@hovoldconsulting.com > > this patch is causing the chip type to no longer be detected correctly, > so please drop this one for now until this has been resolved. Looks like this one was applied to the media tree a couple of days after I sent this nonetheless. Can you drop this one in favour of the v2 posted here: https://lore.kernel.org/r/20210531094434.12651-4-johan@kernel.org or do you want me to send an incremental fix instead? Johan
diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 97ed17a141bb..2c04ed8af0e4 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -612,8 +612,9 @@ static int rtl28xxu_read_config(struct dvb_usb_device *d) static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name) { struct rtl28xxu_dev *dev = d_to_priv(d); + u8 buf[1]; int ret; - struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL}; + struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 1, buf}; dev_dbg(&d->intf->dev, "\n");
The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the zero-length i2c-read request used for type detection by attempting to read a single byte instead. Reported-by: syzbot+faf11bbadc5a372564da@syzkaller.appspotmail.com Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type") Cc: stable@vger.kernel.org # 4.0 Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)