| Message ID | 20210730144922.29111-13-semen.protsenko@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add minimal support for Exynos850 SoC | expand |
On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> wrote: > > On 30/07/2021 16:49, Sam Protsenko wrote: > > Samsung Exynos850 is ARMv8-based mobile-oriented SoC. > > > > Features: > > * CPU: Cortex-A55 Octa (8 cores), up to 2 GHz > > * Memory interface: LPDDR4/4x 2 channels (12.8 GB/s) > > * SD/MMC: SD 3.0, eMMC5.1 DDR 8-bit > > * Modem: 4G LTE, 3G, GSM/GPRS/EDGE > > * RF: Quad GNSS, WiFi 5 (802.11ac), Bluetooth 5.0 > > * GPU: Mali-G52 MP1 > > * Codec: 1080p 60fps H64, HEVC, JPEG HW Codec > > * Display: Full HD+ (2520x1080)@60fps LCD > > * Camera: 16+5MP/13+8MP ISP, MIPI CSI 4/4/2, FD, DRC > > * Connectivity: USB 2.0 DRD, USI (SPI/UART/I2C), HSI2C, I3C, ADC, Audio > > Please document first the features you add (and are working) and > afterwards mention all others capabilities. > I'll remove SoC features, as it's easy to find and it's not needed in commit message anyway. Instead I'll describe which features (nodes) are added in DT by this commit. > > > > This patch adds minimal SoC support. Particular board device tree files > > can include exynos850.dtsi file to get SoC related nodes, and then > > reference those nodes further as needed. > > > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > > --- > > .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ > > arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + > > arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ > > Not buildable. Missing Makefile, missing DTS. Please submit with initial > DTS, otherwise no one is able to verify it even compiles. > This device is not available for purchase yet. I'll send the patch for board dts once it's announced. I can do all the testing for now, if you have any specific requests. Would it be possible for us to review and apply only SoC support for now? Will send v2 soon... > > 3 files changed, 1057 insertions(+) > > create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi > > create mode 100644 arch/arm64/boot/dts/exynos/exynos850-usi.dtsi > > create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi > > > > diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi > > new file mode 100644 > > index 000000000000..4cf0a22cc6db > > --- /dev/null > > +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi > > @@ -0,0 +1,782 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source > > + * > > + * Copyright (C) 2017 Samsung Electronics Co., Ltd. > > + * Copyright (C) 2021 Linaro Ltd. > > + * > > + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device > > + * tree nodes in this file. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/exynos850.h> > > + > > +/ { > > + /* ALIVE */ > > + pinctrl@11850000 { > > + gpa0: gpa0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > That's odd a little, why three cells? How this would be used/referenced? > Fixed. You are right, irq_domain_xlate_twocell() is used in pinctrl-exynos.c. Btw, that fixed the use-case when gpX is specified as interrupt-parrent for other nodes. > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa1: gpa1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa2: gpa2 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa3: gpa3 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpa4: gpa4 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpq0: gpq0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + /* USI_PERI_UART_DBG */ > > + uart0_bus: uart0-bus { > > + samsung,pins = "gpq0-0", "gpq0-1"; > > + samsung,pin-function = <2>; > > EXYNOS_PIN_FUNC_2 > Done, thanks. > > + samsung,pin-pud = <0>; > > EXYNOS_PIN_PULL_xx? > Yes, replaced pin-pud values with these constants, thanks. Won't touch pin-drv properties, though, as different domains have different meanings for the same values, so don't want to introduce the whole bunch of consts. > > + }; > > + > > + decon_f_te_on: decon_f_te_on { > > 1. Where is it used? > 2. Use hyphens in node names. > Please build it with W=1 and fix the warnings. > decon* nodes seem like leftover from vendor kernel. Those are not connected anywhere on my board, so I removed those nodes. Also fixed node names as you suggested, and fixed all stuff found with W=1 build, thanks for reminding me that. > > + samsung,pins = "gpa4-1"; > > Order the nodes based on first pin name, so: > i2c5_bus > i2c6_bus > decon_f_te_on > uart0_bus > Done. Also rearranged the nodes in that way for other pinctrl domains. > > + samsung,pin-function = <0xf>; > > + }; > > + > > + decon_f_te_off: decon_f_te_off { > > Where is it used? > Removed, as explained above. > > + samsung,pins = "gpa4-1"; > > + samsung,pin-function = <0x0>; > > + }; > > + > > + /* I2C_5 | CAM_PMIC_I2C */ > > This comment is confusing. I2C-5 is obvious from node name and label. > CAM_PMIC_I2C does not look like property of SoC but board. > Yeah, unfortunately this confusing I2C naming (CAM_PMIC_I2C and MOTOR_I2C) actually comes from TRM and SoC schematic symbol. So in Device Tree it's called just i2c5 and i2c6 (because it's a regular I2C really), but in TRM it's a mix of both names. I guess it's just a poor pin function naming, done by SoC designers. That said, I suggest changing these comments to something like this: /* I2C5 (also called CAM_PMIC_I2C in TRM) */ /* I2C6 (also called MOTOR_I2C in TRM) */ > > + i2c5_bus: i2c5-bus { > > + samsung,pins = "gpa3-5", "gpa3-6"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* I2C_6 | MOTOR_I2C */ > > + i2c6_bus: i2c6-bus { > > + samsung,pins = "gpa3-7", "gpa4-0"; > > + samsung,pin-function = <3>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + }; > > + > > + /* CMGP */ > > + pinctrl@11c30000 { > > + gpm0: gpm0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpm1: gpm1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpm2: gpm2 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpm3: gpm3 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpm4: gpm4 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + gpm5: gpm5 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + interrupt-parent = <&gic>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + /* usi_cmgp00 */ > > + hsi2c3_bus: hsi2c3-bus { > > + samsung,pins = "gpm0-0", "gpm1-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* usi_cmgp01 */ > > + hsi2c4_bus: hsi2c4-bus { > > + samsung,pins = "gpm4-0", "gpm5-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* spi usi_cmgp00 */ > > + spi1_bus: spi1-bus { > > + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi1_cs: spi1-cs { > > + samsung,pins = "gpm3-0"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi1_cs_func: spi1-cs-func { > > + samsung,pins = "gpm3-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* spi usi_cmgp01 */ > > + spi2_bus: spi2-bus { > > + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi2_cs: spi2-cs { > > + samsung,pins = "gpm7-0"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi2_cs_func: spi2-cs-func { > > + samsung,pins = "gpm7-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* usi_cmgp00_uart */ > > + uart1_bus_single: uart1-bus { > > + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + uart1_bus_dual: uart1-bus-dual { > > + samsung,pins = "gpm0-0", "gpm1-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + /* usi_cmgp01_uart */ > > + uart2_bus_single: uart2-bus { > > + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + uart2_bus_dual: uart2-bus-dual { > > + samsung,pins = "gpm4-0", "gpm5-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + }; > > + > > + /* AUD */ > > + pinctrl@14a60000 { > > + gpb0: gpb0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpb1: gpb1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + aud_codec_mclk: aud-codec-mclk { > > + samsung,pins = "gpb0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_codec_mclk_idle: aud-codec-mclk-idle { > > + samsung,pins = "gpb0-0"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_i2s0_bus: aud-i2s0-bus { > > + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_i2s0_idle: aud-i2s0-idle { > > + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_i2s1_bus: aud-i2s1-bus { > > + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_i2s1_idle: aud-i2s1-idle { > > + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_fm_bus: aud-fm-bus { > > + samsung,pins = "gpb1-4"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <1>; > > + }; > > + > > + aud_fm_idle: aud-fm-idle { > > + samsung,pins = "gpb1-4"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <1>; > > + }; > > + }; > > + > > + /* HSI */ > > + pinctrl@13430000 { > > + gpf2: gpf2 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + sd2_clk: sd2-clk { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd2_cmd: sd2-cmd { > > + samsung,pins = "gpf2-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd2_bus1: sd2-bus-width1 { > > + samsung,pins = "gpf2-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd2_bus4: sd2-bus-width4 { > > + samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + sd2_clk_fast_slew_rate_1_5x: sd2-clk_fast_slew_rate_1_5x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <1>; > > + }; > > + > > + sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd2_clk_fast_slew_rate_2_5x: sd2-clk_fast_slew_rate_2_5x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <4>; > > + }; > > + > > + sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x { > > + samsung,pins = "gpf2-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <5>; > > + }; > > + > > + sd2_pins_as_pdn: sd2-pins-as-pdn { > > + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", > > + "gpf2-4", "gpf2-5"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <2>; > > + }; > > + > > No need for blank line. > Fixed. > > + }; > > + > > + /* CORE */ > > + pinctrl@12070000 { > > + gpf0: gpf0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + sd0_clk: sd0-clk { > > + samsung,pins = "gpf0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_cmd: sd0-cmd { > > + samsung,pins = "gpf0-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_rdqs: sd0-rdqs { > > + samsung,pins = "gpf0-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <1>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_nreset: sd0-nreset { > > + samsung,pins = "gpf0-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_clk_fast_slew_rate_1x: sd0-clk_fast_slew_rate_1x { > > + samsung,pins = "gpf0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <1>; > > + }; > > + > > + sd0_clk_fast_slew_rate_2x: sd0-clk_fast_slew_rate_2x { > > + samsung,pins = "gpf0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd0_clk_fast_slew_rate_3x: sd0-clk_fast_slew_rate_3x { > > + samsung,pins = "gpf0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sd0_clk_fast_slew_rate_4x: sd0-clk_fast_slew_rate_4x { > > + samsung,pins = "gpf0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + gpf1: gpf1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + sd0_bus1: sd0-bus-width1 { > > + samsung,pins = "gpf1-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_bus4: sd0-bus-width4 { > > + samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <3>; > > + }; > > + > > + sd0_bus8: sd0-bus-width8 { > > + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <3>; > > + }; > > + }; > > + > > + /* PERI */ > > + pinctrl@139b0000 { > > + gpg0: gpg0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp0: gpp0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + gpp1: gpp1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpp2: gpp2 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpg1: gpg1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpg2: gpg2 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpg3: gpg3 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpc0: gpc0 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + gpc1: gpc1 { > > + gpio-controller; > > + #gpio-cells = <2>; > > + > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + }; > > + > > + xclkout: xclkout { > > + samsung,pins = "gpq0-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + }; > > + > > + /* usi_hsi2c_0 */ > > Comment seems to duplicate node name/label. > I think the comment is useful, maybe just designed poorly. It's pointing out that this HS-I2C block is based on USI IP-core. Basically we have 7 USI blocks in this SoC: - 5 USIs that pre-defined: HSI2C0, HSI2C1, HSI2C2, UART0 and SPI0; although AFAIU they can be changed via System Register as well, but seems like nobody does that - 2 USIs from CMGP blocks (CMGP0 and CMGP1), which are actually configurable I will revise all such comments like this, just to show those blocks are based on USI design: /* USI: HSI2C0 */ At least when I was bringing up this board, I was really confused for long time about this USI business. So I'm sure some kind of comments might be actually helpful. And that's one reason to keep exynos850-usi.dtsi file: although I removed it for now, squashing it into exynos850.dtsi, I think it might be a good idea to bring that back once all USI nodes are described. Just thinking aloud :) > > + hsi2c0_bus: hsi2c0-bus { > > + samsung,pins = "gpc1-0", "gpc1-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* usi_hsi2c_1 */ > > + hsi2c1_bus: hsi2c1-bus { > > + samsung,pins = "gpc1-2", "gpc1-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* usi_hsi2c_2 */ > > + hsi2c2_bus: hsi2c2-bus { > > + samsung,pins = "gpc1-4", "gpc1-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + /* usi_spi_0 */ > > + spi0_bus: spi0-bus { > > + samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi0_cs: spi0-cs { > > + samsung,pins = "gpp2-1"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + spi0_cs_func: spi0-cs-func { > > + samsung,pins = "gpp2-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + i2c0_bus: i2c0-bus { > > + samsung,pins = "gpp0-0", "gpp0-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + i2c1_bus: i2c1-bus { > > + samsung,pins = "gpp0-2", "gpp0-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + i2c2_bus: i2c2-bus { > > + samsung,pins = "gpp0-4", "gpp0-5"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + i2c3_bus: i2c3-bus { > > + samsung,pins = "gpp1-0", "gpp1-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + i2c4_bus: i2c4-bus { > > + samsung,pins = "gpp1-2", "gpp1-3"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <3>; > > + samsung,pin-drv = <0>; > > + }; > > + > > + fm_lna_en: fm-lna-en { > > + samsung,pins = "gpg2-3"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <0>; > > + samsung,pin-val = <0>; > > + }; > > + > > + sensor_mclk0_in: sensor-mclk0-in { > > + samsung,pins = "gpc0-0"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk0_out: sensor-mclk0-out { > > + samsung,pins = "gpc0-0"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <1>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk0_fn: sensor-mclk0-fn { > > No, seriously. What sensor is it? In SoC? > In this context, "sensor" stands for "camera". Of course, it resides (or rather *may* reside) outside of the SoC. This is just useful pin configuration for camera master clock lines (3 of them). On schematic those 3 lines are grouped into "MCLK" block, and those pins main function is CAM_MCLK. I guess it makes sense to keep those definitions, as I doubt somebody would actually consider using those lines for somthing else. Or I can remove all those sensor* definitions, if you'd like, then those can be added later, when camera support cames in. > > + samsung,pins = "gpc0-0"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk1_in: sensor-mclk1-in { > > + samsung,pins = "gpc0-1"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk1_out: sensor-mclk1-out { > > + samsung,pins = "gpc0-1"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <1>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk1_fn: sensor-mclk1-fn { > > + samsung,pins = "gpc0-1"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk2_in: sensor-mclk2-in { > > + samsung,pins = "gpc0-2"; > > + samsung,pin-function = <0>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk2_out: sensor-mclk2-out { > > + samsung,pins = "gpc0-2"; > > + samsung,pin-function = <1>; > > + samsung,pin-pud = <1>; > > + samsung,pin-drv = <2>; > > + }; > > + > > + sensor_mclk2_fn: sensor-mclk2-fn { > > + samsung,pins = "gpc0-2"; > > + samsung,pin-function = <2>; > > + samsung,pin-pud = <0>; > > + samsung,pin-drv = <2>; > > + }; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi > > new file mode 100644 > > index 000000000000..fb243e0a6260 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi > > @@ -0,0 +1,30 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Samsung's Exynos850 SoC USI device tree source > > + * > > + * Copyright (C) 2019 Samsung Electronics Co., Ltd. > > + * Copyright (C) 2021 Linaro Ltd. > > + * > > + * Samsung's Exynos850 SoC USI channels are listed in this file as device tree > > + * nodes. > > Why here not in exynos850.dtsi? > Yeah, you're right. As it's only serial_0 for now, I've moved that into exynos850.dtsi and removed exynos850-usi.dtsi. > > + */ > > + > > +#include <dt-bindings/clock/exynos850.h> > > + > > +/ { > > + aliases { > > + uart0 = &serial_0; > > + }; > > + > > + /* USI_UART */ > > + serial_0: uart@13820000 { > > This should ne in soc node. > Done. > > + compatible = "samsung,exynos850-uart"; > > + reg = <0x0 0x13820000 0x100>; > > + interrupts = <GIC_SPI INTREQ__UART IRQ_TYPE_LEVEL_HIGH>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart0_bus>; > > + clocks = <&clock GATE_UART_QCH>, <&clock DOUT_UART>; > > + clock-names = "gate_uart_clk0", "uart"; > > + status = "disabled"; > > + }; > > +}; > > diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi > > new file mode 100644 > > index 000000000000..ed2d1c8ae0c3 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi > > @@ -0,0 +1,245 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Samsung Exynos850 SoC device tree source > > + * > > + * Copyright (C) 2018 Samsung Electronics Co., Ltd. > > + * Copyright (C) 2021 Linaro Ltd. > > + * > > + * Samsung Exynos850 SoC device nodes are listed in this file. > > + * Exynos based board files can include this file and provide > > + * values for board specific bindings. > > + */ > > + > > +#include <dt-bindings/interrupt-controller/exynos850.h> > > +#include <dt-bindings/clock/exynos850.h> > > +#include "exynos850-pinctrl.dtsi" > > +#include "exynos850-usi.dtsi" > > + > > +/ { > > Add a comment like: > /* Also known under engineering name exynos3830 */ > Sure. > > + compatible = "samsung,exynos850"; > > Undocumented compatible. Checkpatch should complain. > It actually doesn't, though it does complain about other undocumented compatibles. I understand that it should be documented in samsung-boards.yaml, but is it ok with you if I do that later, when adding some actual board's dts? Just don't want to have two patches for that. > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <1>; > > + > > + aliases { > > + pinctrl0 = &pinctrl_0; > > + pinctrl1 = &pinctrl_1; > > + pinctrl2 = &pinctrl_2; > > + pinctrl3 = &pinctrl_3; > > + pinctrl4 = &pinctrl_4; > > + pinctrl5 = &pinctrl_5; > > + }; > > + > > + cpus { > > + #address-cells = <2>; > > + #size-cells = <0>; > > + > > + cpu-map { > > + cluster0 { > > + core0 { > > + cpu = <&cpu0>; > > + }; > > + core1 { > > + cpu = <&cpu1>; > > + }; > > + core2 { > > + cpu = <&cpu2>; > > + }; > > + core3 { > > + cpu = <&cpu3>; > > + }; > > + }; > > + > > + cluster1 { > > + core0 { > > + cpu = <&cpu4>; > > + }; > > + core1 { > > + cpu = <&cpu5>; > > + }; > > + core2 { > > + cpu = <&cpu6>; > > + }; > > + core3 { > > + cpu = <&cpu7>; > > + }; > > + }; > > + }; > > + > > + cpu0: cpu@0000 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0000>; > > reg = <0x0 0x0>; > (in following places similarly) > Done, and also fixed @0000 stuff, while at it. > > + enable-method = "psci"; > > + }; > > + cpu1: cpu@0001 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0001>; > > + enable-method = "psci"; > > + }; > > + cpu2: cpu@0002 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0002>; > > + enable-method = "psci"; > > + }; > > + cpu3: cpu@0003 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0003>; > > + enable-method = "psci"; > > + }; > > + cpu4: cpu@0004 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0100>; > > + enable-method = "psci"; > > + }; > > + cpu5: cpu@0005 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0101>; > > + enable-method = "psci"; > > + }; > > + cpu6: cpu@0006 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0102>; > > + enable-method = "psci"; > > + }; > > + cpu7: cpu@0007 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55", "arm,armv8"; > > + reg = <0x0 0x0103>; > > + enable-method = "psci"; > > + }; > > + }; > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + }; > > + > > + gic: interrupt-controller@12a00000 { > > + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; > > + #interrupt-cells = <3>; > > + #address-cells = <0>; > > + interrupt-controller; > > + reg = <0x0 0x12a01000 0x1000>, > > + <0x0 0x12a02000 0x1000>, > > + <0x0 0x12a04000 0x2000>, > > + <0x0 0x12a06000 0x2000>; > > + interrupts = <GIC_PPI 9 > > + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 > > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 14 > > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 11 > > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 10 > > + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; > > + clock-frequency = <26000000>; > > + use-clocksource-only; > > + use-physical-timer; > > + }; > > + > > All below should be under soc node. > Done. > Please don't write new DTS/DTSI from scratch but use exynos5433.dtsi as > template/example. > Well, I didn't implement that from scratch :) As you probably figured, I reworked the vendor's dts (heavily, that is). But yeah, I definitely re-checked with existing DTs this time (exynos5433 and exynos7 mostly), and tried to follow best practices. > > + clock: clock-controller@0x120e0000 { > > + compatible = "samsung,exynos850-clock"; > > + reg = <0x0 0x120e0000 0x8000>; > > + #clock-cells = <1>; > > + }; > > + > > + /* ALIVE */ > > + pinctrl_0: pinctrl@11850000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x11850000 0x1000>; > > + interrupts = <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>; > > + > > + wakeup-interrupt-controller { > > + compatible = "samsung,exynos7-wakeup-eint"; > > + }; > > + }; > > + > > + /* CMGP */ > > + pinctrl_1: pinctrl@11c30000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x11c30000 0x1000>; > > + interrupts = > > + <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM06 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI INTREQ__CMGP_EXT_INTM07 IRQ_TYPE_LEVEL_HIGH>; > > + > > + wakeup-interrupt-controller { > > + compatible = "samsung,exynos7-wakeup-eint"; > > + }; > > + }; > > + > > + /* AUD */ > > + pinctrl_2: pinctrl@14a60000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x14a60000 0x1000>; > > + }; > > + > > + /* HSI */ > > + pinctrl_3: pinctrl@13430000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x13430000 0x1000>; > > + interrupts = <GIC_SPI INTREQ__GPIO_HSI IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + /* CORE */ > > + pinctrl_4: pinctrl@12070000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x12070000 0x1000>; > > + interrupts = <GIC_SPI INTREQ__GPIO_CORE IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + /* PERI */ > > + pinctrl_5: pinctrl@139b0000 { > > + compatible = "samsung,exynos850-pinctrl"; > > + reg = <0x0 0x139b0000 0x1000>; > > + interrupts = <GIC_SPI INTREQ__GPIO_PERI IRQ_TYPE_LEVEL_HIGH>; > > + }; > > +}; > > > > > Best regards, > Krzysztof
On 06/08/2021 01:06, Sam Protsenko wrote: > On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski > <krzysztof.kozlowski@canonical.com> wrote: > >>> >>> This patch adds minimal SoC support. Particular board device tree files >>> can include exynos850.dtsi file to get SoC related nodes, and then >>> reference those nodes further as needed. >>> >>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>> --- >>> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ >>> arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + >>> arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ >> >> Not buildable. Missing Makefile, missing DTS. Please submit with initial >> DTS, otherwise no one is able to verify it even compiles. >> > > This device is not available for purchase yet. I'll send the patch for > board dts once it's announced. I can do all the testing for now, if > you have any specific requests. Would it be possible for us to review > and apply only SoC support for now? Will send v2 soon... What you propose is equal to adding a driver (C source code) without ability to compile it. What's the point of having it in the kernel? It's unverifiable, unbuildable and unusable. We can review the DTSI however merging has to be with a DTS. Usually the SoC vendor adds first an evalkit (e.g. SMDK board). Maybe you have one for Exynos850? Otherwise if you cannot disclose the actual board, the DTSI will have to wait. You can submit drivers, though. > >>> 3 files changed, 1057 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi >>> create mode 100644 arch/arm64/boot/dts/exynos/exynos850-usi.dtsi >>> create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi >>> >>> diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi >>> new file mode 100644 >>> index 000000000000..4cf0a22cc6db >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi >>> @@ -0,0 +1,782 @@ >>> +// SPDX-License-Identifier: GPL-2.0 >>> +/* >>> + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source >>> + * >>> + * Copyright (C) 2017 Samsung Electronics Co., Ltd. >>> + * Copyright (C) 2021 Linaro Ltd. >>> + * >>> + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device >>> + * tree nodes in this file. >>> + */ >>> + >>> +#include <dt-bindings/interrupt-controller/exynos850.h> >>> + >>> +/ { >>> + /* ALIVE */ >>> + pinctrl@11850000 { >>> + gpa0: gpa0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >> >> That's odd a little, why three cells? How this would be used/referenced? >> > > Fixed. You are right, irq_domain_xlate_twocell() is used in > pinctrl-exynos.c. Btw, that fixed the use-case when gpX is specified > as interrupt-parrent for other nodes. > >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpa1: gpa1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpa2: gpa2 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpa3: gpa3 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpa4: gpa4 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI INTREQ__ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpq0: gpq0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + /* USI_PERI_UART_DBG */ >>> + uart0_bus: uart0-bus { >>> + samsung,pins = "gpq0-0", "gpq0-1"; >>> + samsung,pin-function = <2>; >> >> EXYNOS_PIN_FUNC_2 >> > > Done, thanks. > >>> + samsung,pin-pud = <0>; >> >> EXYNOS_PIN_PULL_xx? >> > > Yes, replaced pin-pud values with these constants, thanks. Won't touch > pin-drv properties, though, as different domains have different > meanings for the same values, so don't want to introduce the whole > bunch of consts. > >>> + }; >>> + >>> + decon_f_te_on: decon_f_te_on { >> >> 1. Where is it used? >> 2. Use hyphens in node names. >> Please build it with W=1 and fix the warnings. >> > > decon* nodes seem like leftover from vendor kernel. Those are not > connected anywhere on my board, so I removed those nodes. > > Also fixed node names as you suggested, and fixed all stuff found with > W=1 build, thanks for reminding me that. > >>> + samsung,pins = "gpa4-1"; >> >> Order the nodes based on first pin name, so: >> i2c5_bus >> i2c6_bus >> decon_f_te_on >> uart0_bus >> > > Done. Also rearranged the nodes in that way for other pinctrl domains. > >>> + samsung,pin-function = <0xf>; >>> + }; >>> + >>> + decon_f_te_off: decon_f_te_off { >> >> Where is it used? >> > > Removed, as explained above. > >>> + samsung,pins = "gpa4-1"; >>> + samsung,pin-function = <0x0>; >>> + }; >>> + >>> + /* I2C_5 | CAM_PMIC_I2C */ >> >> This comment is confusing. I2C-5 is obvious from node name and label. >> CAM_PMIC_I2C does not look like property of SoC but board. >> > > Yeah, unfortunately this confusing I2C naming (CAM_PMIC_I2C and > MOTOR_I2C) actually comes from TRM and SoC schematic symbol. Schematic symbol of SoC? Interesting document... What do you have there? Internals of SoC? > So in > Device Tree it's called just i2c5 and i2c6 (because it's a regular I2C > really), but in TRM it's a mix of both names. I guess it's just a poor > pin function naming, done by SoC designers. > > That said, I suggest changing these comments to something like this: > > /* I2C5 (also called CAM_PMIC_I2C in TRM) */ > /* I2C6 (also called MOTOR_I2C in TRM) */ OK, assuming that by TRM you mean Exynos850 TRM. > >>> + i2c5_bus: i2c5-bus { >>> + samsung,pins = "gpa3-5", "gpa3-6"; >>> + samsung,pin-function = <3>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* I2C_6 | MOTOR_I2C */ >>> + i2c6_bus: i2c6-bus { >>> + samsung,pins = "gpa3-7", "gpa4-0"; >>> + samsung,pin-function = <3>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + }; >>> + >>> + /* CMGP */ >>> + pinctrl@11c30000 { >>> + gpm0: gpm0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpm1: gpm1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpm2: gpm2 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpm3: gpm3 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpm4: gpm4 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + gpm5: gpm5 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupt-parent = <&gic>; >>> + interrupts = >>> + <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + /* usi_cmgp00 */ >>> + hsi2c3_bus: hsi2c3-bus { >>> + samsung,pins = "gpm0-0", "gpm1-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* usi_cmgp01 */ >>> + hsi2c4_bus: hsi2c4-bus { >>> + samsung,pins = "gpm4-0", "gpm5-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* spi usi_cmgp00 */ >>> + spi1_bus: spi1-bus { >>> + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi1_cs: spi1-cs { >>> + samsung,pins = "gpm3-0"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi1_cs_func: spi1-cs-func { >>> + samsung,pins = "gpm3-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* spi usi_cmgp01 */ >>> + spi2_bus: spi2-bus { >>> + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi2_cs: spi2-cs { >>> + samsung,pins = "gpm7-0"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi2_cs_func: spi2-cs-func { >>> + samsung,pins = "gpm7-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* usi_cmgp00_uart */ >>> + uart1_bus_single: uart1-bus { >>> + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + }; >>> + >>> + uart1_bus_dual: uart1-bus-dual { >>> + samsung,pins = "gpm0-0", "gpm1-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + }; >>> + >>> + /* usi_cmgp01_uart */ >>> + uart2_bus_single: uart2-bus { >>> + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + }; >>> + >>> + uart2_bus_dual: uart2-bus-dual { >>> + samsung,pins = "gpm4-0", "gpm5-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + }; >>> + }; >>> + >>> + /* AUD */ >>> + pinctrl@14a60000 { >>> + gpb0: gpb0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpb1: gpb1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + aud_codec_mclk: aud-codec-mclk { >>> + samsung,pins = "gpb0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_codec_mclk_idle: aud-codec-mclk-idle { >>> + samsung,pins = "gpb0-0"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_i2s0_bus: aud-i2s0-bus { >>> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_i2s0_idle: aud-i2s0-idle { >>> + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_i2s1_bus: aud-i2s1-bus { >>> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_i2s1_idle: aud-i2s1-idle { >>> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_fm_bus: aud-fm-bus { >>> + samsung,pins = "gpb1-4"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + >>> + aud_fm_idle: aud-fm-idle { >>> + samsung,pins = "gpb1-4"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <1>; >>> + }; >>> + }; >>> + >>> + /* HSI */ >>> + pinctrl@13430000 { >>> + gpf2: gpf2 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + sd2_clk: sd2-clk { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd2_cmd: sd2-cmd { >>> + samsung,pins = "gpf2-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd2_bus1: sd2-bus-width1 { >>> + samsung,pins = "gpf2-2"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd2_bus4: sd2-bus-width4 { >>> + samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_1_5x: sd2-clk_fast_slew_rate_1_5x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <1>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_2_5x: sd2-clk_fast_slew_rate_2_5x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <4>; >>> + }; >>> + >>> + sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x { >>> + samsung,pins = "gpf2-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <5>; >>> + }; >>> + >>> + sd2_pins_as_pdn: sd2-pins-as-pdn { >>> + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", >>> + "gpf2-4", "gpf2-5"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <2>; >>> + }; >>> + >> >> No need for blank line. >> > > Fixed. > >>> + }; >>> + >>> + /* CORE */ >>> + pinctrl@12070000 { >>> + gpf0: gpf0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + sd0_clk: sd0-clk { >>> + samsung,pins = "gpf0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_cmd: sd0-cmd { >>> + samsung,pins = "gpf0-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_rdqs: sd0-rdqs { >>> + samsung,pins = "gpf0-2"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <1>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_nreset: sd0-nreset { >>> + samsung,pins = "gpf0-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_clk_fast_slew_rate_1x: sd0-clk_fast_slew_rate_1x { >>> + samsung,pins = "gpf0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <1>; >>> + }; >>> + >>> + sd0_clk_fast_slew_rate_2x: sd0-clk_fast_slew_rate_2x { >>> + samsung,pins = "gpf0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd0_clk_fast_slew_rate_3x: sd0-clk_fast_slew_rate_3x { >>> + samsung,pins = "gpf0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sd0_clk_fast_slew_rate_4x: sd0-clk_fast_slew_rate_4x { >>> + samsung,pins = "gpf0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + gpf1: gpf1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + sd0_bus1: sd0-bus-width1 { >>> + samsung,pins = "gpf1-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_bus4: sd0-bus-width4 { >>> + samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + >>> + sd0_bus8: sd0-bus-width8 { >>> + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <3>; >>> + }; >>> + }; >>> + >>> + /* PERI */ >>> + pinctrl@139b0000 { >>> + gpg0: gpg0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpp0: gpp0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + gpp1: gpp1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpp2: gpp2 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpg1: gpg1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpg2: gpg2 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpg3: gpg3 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpc0: gpc0 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + gpc1: gpc1 { >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + }; >>> + >>> + xclkout: xclkout { >>> + samsung,pins = "gpq0-2"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + }; >>> + >>> + /* usi_hsi2c_0 */ >> >> Comment seems to duplicate node name/label. >> > > I think the comment is useful, maybe just designed poorly. It's > pointing out that this HS-I2C block is based on USI IP-core. Basically > we have 7 USI blocks in this SoC: > - 5 USIs that pre-defined: HSI2C0, HSI2C1, HSI2C2, UART0 and SPI0; > although AFAIU they can be changed via System Register as well, but > seems like nobody does that > - 2 USIs from CMGP blocks (CMGP0 and CMGP1), which are actually configurable > > I will revise all such comments like this, just to show those blocks > are based on USI design: > > /* USI: HSI2C0 */ OK > > At least when I was bringing up this board, I was really confused for > long time about this USI business. So I'm sure some kind of comments > might be actually helpful. And that's one reason to keep > exynos850-usi.dtsi file: although I removed it for now, squashing it > into exynos850.dtsi, I think it might be a good idea to bring that > back once all USI nodes are described. Just thinking aloud :) > >>> + hsi2c0_bus: hsi2c0-bus { >>> + samsung,pins = "gpc1-0", "gpc1-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* usi_hsi2c_1 */ >>> + hsi2c1_bus: hsi2c1-bus { >>> + samsung,pins = "gpc1-2", "gpc1-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* usi_hsi2c_2 */ >>> + hsi2c2_bus: hsi2c2-bus { >>> + samsung,pins = "gpc1-4", "gpc1-5"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + /* usi_spi_0 */ >>> + spi0_bus: spi0-bus { >>> + samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi0_cs: spi0-cs { >>> + samsung,pins = "gpp2-1"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + spi0_cs_func: spi0-cs-func { >>> + samsung,pins = "gpp2-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + i2c0_bus: i2c0-bus { >>> + samsung,pins = "gpp0-0", "gpp0-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + i2c1_bus: i2c1-bus { >>> + samsung,pins = "gpp0-2", "gpp0-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + i2c2_bus: i2c2-bus { >>> + samsung,pins = "gpp0-4", "gpp0-5"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + i2c3_bus: i2c3-bus { >>> + samsung,pins = "gpp1-0", "gpp1-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + i2c4_bus: i2c4-bus { >>> + samsung,pins = "gpp1-2", "gpp1-3"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <3>; >>> + samsung,pin-drv = <0>; >>> + }; >>> + >>> + fm_lna_en: fm-lna-en { >>> + samsung,pins = "gpg2-3"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-val = <0>; >>> + }; >>> + >>> + sensor_mclk0_in: sensor-mclk0-in { >>> + samsung,pins = "gpc0-0"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk0_out: sensor-mclk0-out { >>> + samsung,pins = "gpc0-0"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <1>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk0_fn: sensor-mclk0-fn { >> >> No, seriously. What sensor is it? In SoC? >> > > In this context, "sensor" stands for "camera". Of course, it resides > (or rather *may* reside) outside of the SoC. This is just useful pin > configuration for camera master clock lines (3 of them). On schematic > those 3 lines are grouped into "MCLK" block, and those pins main > function is CAM_MCLK. I guess it makes sense to keep those > definitions, as I doubt somebody would actually consider using those > lines for somthing else. Or I can remove all those sensor* > definitions, if you'd like, then those can be added later, when camera > support cames in. Hmmm, indeed we define in pinctrl useful typical functions and I understand this one is such. Let's keep them then. > >>> + samsung,pins = "gpc0-0"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk1_in: sensor-mclk1-in { >>> + samsung,pins = "gpc0-1"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk1_out: sensor-mclk1-out { >>> + samsung,pins = "gpc0-1"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <1>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk1_fn: sensor-mclk1-fn { >>> + samsung,pins = "gpc0-1"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk2_in: sensor-mclk2-in { >>> + samsung,pins = "gpc0-2"; >>> + samsung,pin-function = <0>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk2_out: sensor-mclk2-out { >>> + samsung,pins = "gpc0-2"; >>> + samsung,pin-function = <1>; >>> + samsung,pin-pud = <1>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + >>> + sensor_mclk2_fn: sensor-mclk2-fn { >>> + samsung,pins = "gpc0-2"; >>> + samsung,pin-function = <2>; >>> + samsung,pin-pud = <0>; >>> + samsung,pin-drv = <2>; >>> + }; >>> + }; >>> +}; >>> diff --git a/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi >>> new file mode 100644 >>> index 000000000000..fb243e0a6260 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi >>> @@ -0,0 +1,30 @@ >>> +// SPDX-License-Identifier: GPL-2.0 >>> +/* >>> + * Samsung's Exynos850 SoC USI device tree source >>> + * >>> + * Copyright (C) 2019 Samsung Electronics Co., Ltd. >>> + * Copyright (C) 2021 Linaro Ltd. >>> + * >>> + * Samsung's Exynos850 SoC USI channels are listed in this file as device tree >>> + * nodes. >> >> Why here not in exynos850.dtsi? >> > > Yeah, you're right. As it's only serial_0 for now, I've moved that > into exynos850.dtsi and removed exynos850-usi.dtsi. > >>> + */ >>> + >>> +#include <dt-bindings/clock/exynos850.h> >>> + >>> +/ { >>> + aliases { >>> + uart0 = &serial_0; >>> + }; >>> + >>> + /* USI_UART */ >>> + serial_0: uart@13820000 { >> >> This should ne in soc node. >> > > Done. > >>> + compatible = "samsung,exynos850-uart"; >>> + reg = <0x0 0x13820000 0x100>; >>> + interrupts = <GIC_SPI INTREQ__UART IRQ_TYPE_LEVEL_HIGH>; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&uart0_bus>; >>> + clocks = <&clock GATE_UART_QCH>, <&clock DOUT_UART>; >>> + clock-names = "gate_uart_clk0", "uart"; >>> + status = "disabled"; >>> + }; >>> +}; >>> diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi >>> new file mode 100644 >>> index 000000000000..ed2d1c8ae0c3 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi >>> @@ -0,0 +1,245 @@ >>> +// SPDX-License-Identifier: GPL-2.0 >>> +/* >>> + * Samsung Exynos850 SoC device tree source >>> + * >>> + * Copyright (C) 2018 Samsung Electronics Co., Ltd. >>> + * Copyright (C) 2021 Linaro Ltd. >>> + * >>> + * Samsung Exynos850 SoC device nodes are listed in this file. >>> + * Exynos based board files can include this file and provide >>> + * values for board specific bindings. >>> + */ >>> + >>> +#include <dt-bindings/interrupt-controller/exynos850.h> >>> +#include <dt-bindings/clock/exynos850.h> >>> +#include "exynos850-pinctrl.dtsi" >>> +#include "exynos850-usi.dtsi" >>> + >>> +/ { >> >> Add a comment like: >> /* Also known under engineering name exynos3830 */ >> > > Sure. > >>> + compatible = "samsung,exynos850"; >> >> Undocumented compatible. Checkpatch should complain. >> > > It actually doesn't, though it does complain about other undocumented > compatibles. I understand that it should be documented in > samsung-boards.yaml, but is it ok with you if I do that later, when > adding some actual board's dts? Just don't want to have two patches > for that. We're back to the first question - it needs to come with DTS and then you document both compatibles. Best regards, Krzysztof
On 06/08/2021 14:07, Sam Protsenko wrote: > On Fri, 6 Aug 2021 at 10:49, Krzysztof Kozlowski > <krzysztof.kozlowski@canonical.com> wrote: >> >> On 06/08/2021 01:06, Sam Protsenko wrote: >>> On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski >>> <krzysztof.kozlowski@canonical.com> wrote: >>> >>>>> >>>>> This patch adds minimal SoC support. Particular board device tree files >>>>> can include exynos850.dtsi file to get SoC related nodes, and then >>>>> reference those nodes further as needed. >>>>> >>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>>>> --- >>>>> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ >>>>> arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + >>>>> arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ >>>> >>>> Not buildable. Missing Makefile, missing DTS. Please submit with initial >>>> DTS, otherwise no one is able to verify it even compiles. >>>> >>> >>> This device is not available for purchase yet. I'll send the patch for >>> board dts once it's announced. I can do all the testing for now, if >>> you have any specific requests. Would it be possible for us to review >>> and apply only SoC support for now? Will send v2 soon... >> >> What you propose is equal to adding a driver (C source code) without >> ability to compile it. What's the point of having it in the kernel? It's >> unverifiable, unbuildable and unusable. >> > > Yes, I understand. That's adding code with no users, and it's not a > good practice. > >> We can review the DTSI however merging has to be with a DTS. Usually the >> SoC vendor adds first an evalkit (e.g. SMDK board). Maybe you have one >> for Exynos850? Otherwise if you cannot disclose the actual board, the >> DTSI will have to wait. You can submit drivers, though. >> > > Sure, let's go this way. I'll send v2 soon. Improving patches and > having Reviewed-by tag for those would good enough for me at this > point. I'll continue to prepare another Exynos850 related patches > until the actual board is announced, like proper clock driver, reset, > MMC, etc. Is it ok if I send those for a review too (so I can fix all > issues ahead)? Sure, prepare all necessary drivers earlier. I suspect clocks will be a real pain because of significant changes modeled in vendor kernel. I remember Paweł Chmiel (+Cc) was doing something for these: https://github.com/PabloPL/linux/tree/exynos7420 I mentioned before - you should also modify the chipid driver. Check also other drivers in drivers/soc/samsung, although some are needed only for suspend&resume. BTW, Paweł, How is your Exynos7420 progress? :) > And should I maybe add RFC tag for those? No need. Drivers can be merged before DTS users. Best regards, Krzysztof
On Fri, 6 Aug 2021 at 15:48, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> wrote: > > On 06/08/2021 14:32, Krzysztof Kozlowski wrote: > > On 06/08/2021 14:07, Sam Protsenko wrote: > >> On Fri, 6 Aug 2021 at 10:49, Krzysztof Kozlowski > >> <krzysztof.kozlowski@canonical.com> wrote: > >>> > >>> On 06/08/2021 01:06, Sam Protsenko wrote: > >>>> On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski > >>>> <krzysztof.kozlowski@canonical.com> wrote: > >>>> > >>>>>> > >>>>>> This patch adds minimal SoC support. Particular board device tree files > >>>>>> can include exynos850.dtsi file to get SoC related nodes, and then > >>>>>> reference those nodes further as needed. > >>>>>> > >>>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > >>>>>> --- > >>>>>> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ > >>>>>> arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + > >>>>>> arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ > >>>>> > >>>>> Not buildable. Missing Makefile, missing DTS. Please submit with initial > >>>>> DTS, otherwise no one is able to verify it even compiles. > >>>>> > >>>> > >>>> This device is not available for purchase yet. I'll send the patch for > >>>> board dts once it's announced. I can do all the testing for now, if > >>>> you have any specific requests. Would it be possible for us to review > >>>> and apply only SoC support for now? Will send v2 soon... > >>> > >>> What you propose is equal to adding a driver (C source code) without > >>> ability to compile it. What's the point of having it in the kernel? It's > >>> unverifiable, unbuildable and unusable. > >>> > >> > >> Yes, I understand. That's adding code with no users, and it's not a > >> good practice. > >> > >>> We can review the DTSI however merging has to be with a DTS. Usually the > >>> SoC vendor adds first an evalkit (e.g. SMDK board). Maybe you have one > >>> for Exynos850? Otherwise if you cannot disclose the actual board, the > >>> DTSI will have to wait. You can submit drivers, though. > >>> > >> > >> Sure, let's go this way. I'll send v2 soon. Improving patches and > >> having Reviewed-by tag for those would good enough for me at this > >> point. I'll continue to prepare another Exynos850 related patches > >> until the actual board is announced, like proper clock driver, reset, > >> MMC, etc. Is it ok if I send those for a review too (so I can fix all > >> issues ahead)? > > > > Sure, prepare all necessary drivers earlier. I suspect clocks will be a > > real pain because of significant changes modeled in vendor kernel. I > > remember Paweł Chmiel (+Cc) was doing something for these: > > https://github.com/PabloPL/linux/tree/exynos7420 > > > > I mentioned before - you should also modify the chipid driver. Check > > also other drivers in drivers/soc/samsung, although some are needed only > > for suspend&resume. > > Yes, in due course... There won't be much problems with chip-id driver. But pretty much all platform drivers depend on clk, and that one I'm afraid I'll have to implement from scratch. Will take me a while, as vendor's codebase for clk driver is huge and depend on another huge non-upstreamable abstraction layer framework they have, and also they have kind of strange home brewed composite clocks... Anyway, that's what I'm going to look into next. Btw, I just sent v2 :) > > You can also take a look at Exynos8895 efforts: > https://github.com/ivoszbg/linux/commits/for-upstream/exynos8895 > > Since knowledge, datasheets and efforts are quite spread all over, I > keep track of some work here: > https://exynos.wiki.kernel.org/community > Thanks, Krzysztof! I'm sure that info will help a lot with further work, like clock driver. > > Best regards, > Krzysztof
W dniu 06.08.2021 o 14:32, Krzysztof Kozlowski pisze: > On 06/08/2021 14:07, Sam Protsenko wrote: >> On Fri, 6 Aug 2021 at 10:49, Krzysztof Kozlowski >> <krzysztof.kozlowski@canonical.com> wrote: >>> >>> On 06/08/2021 01:06, Sam Protsenko wrote: >>>> On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski >>>> <krzysztof.kozlowski@canonical.com> wrote: >>>> >>>>>> >>>>>> This patch adds minimal SoC support. Particular board device tree files >>>>>> can include exynos850.dtsi file to get SoC related nodes, and then >>>>>> reference those nodes further as needed. >>>>>> >>>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> >>>>>> --- >>>>>> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ >>>>>> arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + >>>>>> arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ >>>>> >>>>> Not buildable. Missing Makefile, missing DTS. Please submit with initial >>>>> DTS, otherwise no one is able to verify it even compiles. >>>>> >>>> >>>> This device is not available for purchase yet. I'll send the patch for >>>> board dts once it's announced. I can do all the testing for now, if >>>> you have any specific requests. Would it be possible for us to review >>>> and apply only SoC support for now? Will send v2 soon... >>> >>> What you propose is equal to adding a driver (C source code) without >>> ability to compile it. What's the point of having it in the kernel? It's >>> unverifiable, unbuildable and unusable. >>> >> >> Yes, I understand. That's adding code with no users, and it's not a >> good practice. >> >>> We can review the DTSI however merging has to be with a DTS. Usually the >>> SoC vendor adds first an evalkit (e.g. SMDK board). Maybe you have one >>> for Exynos850? Otherwise if you cannot disclose the actual board, the >>> DTSI will have to wait. You can submit drivers, though. >>> >> >> Sure, let's go this way. I'll send v2 soon. Improving patches and >> having Reviewed-by tag for those would good enough for me at this >> point. I'll continue to prepare another Exynos850 related patches >> until the actual board is announced, like proper clock driver, reset, >> MMC, etc. Is it ok if I send those for a review too (so I can fix all >> issues ahead)? > > Sure, prepare all necessary drivers earlier. I suspect clocks will be a > real pain because of significant changes modeled in vendor kernel. I > remember Paweł Chmiel (+Cc) was doing something for these: > https://github.com/PabloPL/linux/tree/exynos7420 > > I mentioned before - you should also modify the chipid driver. Check > also other drivers in drivers/soc/samsung, although some are needed only > for suspend&resume. > > BTW, Paweł, > How is your Exynos7420 progress? :) Hi Sadly i had to postpone it for a while. Maybe will have more time now to get back to it. About clock driver. In vendor sources there is clk driver with something called virtual clocks (different than real ones). That driver calls another driver called pwrcal, responsible for real manipulation of clocks in hardware. This one has info about real clocks and also additional info about for example rate for some of them, which is read from binary from memory, by another driver called ect_parser in case of devices at which i did looked. In my case i was able to find some more info about real clocks there - for example register names and offsets https://github.com/krzk/linux-vendor-backup/blob/mokee/android-3.18-samsung-galaxy-s7-sm-g930f-exynos8890/drivers/soc/samsung/pwrcal/S5E8890/S5E8890-cmusfr.h and some clocks hierarchy info inside https://github.com/krzk/linux-vendor-backup/blob/mokee/android-3.18-samsung-galaxy-s7-sm-g930f-exynos8890/drivers/soc/samsung/pwrcal/S5E8890/S5E8890-cmu.c but there was still many info missing. Finding a way (which could be applied to other Exynos SOC) to "convert" or use that vendor code and turn it into mainline driver, especially without TRM which is not available for all/most of them, would be great. I'm wondering if Exynos850 device has the same issue as on 7420 (and probably 8890/7578 and maybe also other 64 bit Exynos devices) - broken firmware. For example i had to specify in dts timer clock frequency, on few devices there is also a problem with timer registers not properly configured by FW, which probably won't be fixed by vendor and patches with workaround for it in kernel were rejected :/. > >> And should I maybe add RFC tag for those? > > No need. Drivers can be merged before DTS users. > > Best regards, > Krzysztof >
On Fri, 6 Aug 2021 at 23:32, Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> wrote: > > W dniu 06.08.2021 o 14:32, Krzysztof Kozlowski pisze: > > On 06/08/2021 14:07, Sam Protsenko wrote: > >> On Fri, 6 Aug 2021 at 10:49, Krzysztof Kozlowski > >> <krzysztof.kozlowski@canonical.com> wrote: > >>> > >>> On 06/08/2021 01:06, Sam Protsenko wrote: > >>>> On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski > >>>> <krzysztof.kozlowski@canonical.com> wrote: > >>>> > >>>>>> > >>>>>> This patch adds minimal SoC support. Particular board device tree files > >>>>>> can include exynos850.dtsi file to get SoC related nodes, and then > >>>>>> reference those nodes further as needed. > >>>>>> > >>>>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > >>>>>> --- > >>>>>> .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ > >>>>>> arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + > >>>>>> arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ > >>>>> > >>>>> Not buildable. Missing Makefile, missing DTS. Please submit with initial > >>>>> DTS, otherwise no one is able to verify it even compiles. > >>>>> > >>>> > >>>> This device is not available for purchase yet. I'll send the patch for > >>>> board dts once it's announced. I can do all the testing for now, if > >>>> you have any specific requests. Would it be possible for us to review > >>>> and apply only SoC support for now? Will send v2 soon... > >>> > >>> What you propose is equal to adding a driver (C source code) without > >>> ability to compile it. What's the point of having it in the kernel? It's > >>> unverifiable, unbuildable and unusable. > >>> > >> > >> Yes, I understand. That's adding code with no users, and it's not a > >> good practice. > >> > >>> We can review the DTSI however merging has to be with a DTS. Usually the > >>> SoC vendor adds first an evalkit (e.g. SMDK board). Maybe you have one > >>> for Exynos850? Otherwise if you cannot disclose the actual board, the > >>> DTSI will have to wait. You can submit drivers, though. > >>> > >> > >> Sure, let's go this way. I'll send v2 soon. Improving patches and > >> having Reviewed-by tag for those would good enough for me at this > >> point. I'll continue to prepare another Exynos850 related patches > >> until the actual board is announced, like proper clock driver, reset, > >> MMC, etc. Is it ok if I send those for a review too (so I can fix all > >> issues ahead)? > > > > Sure, prepare all necessary drivers earlier. I suspect clocks will be a > > real pain because of significant changes modeled in vendor kernel. I > > remember Paweł Chmiel (+Cc) was doing something for these: > > https://github.com/PabloPL/linux/tree/exynos7420 > > > > I mentioned before - you should also modify the chipid driver. Check > > also other drivers in drivers/soc/samsung, although some are needed only > > for suspend&resume. > > > > BTW, Paweł, > > How is your Exynos7420 progress? :) > Hi > > Sadly i had to postpone it for a while. Maybe will have more time now to > get back to it. > > About clock driver. In vendor sources there is clk driver with something > called virtual clocks (different than real ones). That driver calls > another driver called pwrcal, responsible for real manipulation of > clocks in hardware. This one has info about real clocks and also > additional info about for example rate for some of them, which is read > from binary from memory, by another driver called ect_parser in case of > devices at which i did looked. > > In my case i was able to find some more info about real clocks there - > for example register names and offsets > https://github.com/krzk/linux-vendor-backup/blob/mokee/android-3.18-samsung-galaxy-s7-sm-g930f-exynos8890/drivers/soc/samsung/pwrcal/S5E8890/S5E8890-cmusfr.h > and some clocks hierarchy info inside > https://github.com/krzk/linux-vendor-backup/blob/mokee/android-3.18-samsung-galaxy-s7-sm-g930f-exynos8890/drivers/soc/samsung/pwrcal/S5E8890/S5E8890-cmu.c > but there was still many info missing. > > Finding a way (which could be applied to other Exynos SOC) to "convert" > or use that vendor code and turn it into mainline driver, especially > without TRM which is not available for all/most of them, would be great. > > I'm wondering if Exynos850 device has the same issue as on 7420 (and > probably 8890/7578 and maybe also other 64 bit Exynos devices) - broken > firmware. For example i had to specify in dts timer clock frequency, on > few devices there is also a problem with timer registers not properly > configured by FW, which probably won't be fixed by vendor and patches > with workaround for it in kernel were rejected :/. Hi Paweł, Sorry for the late reply. Thanks for your input! I just started implementing the clock driver, and maybe I can share some useful stuff in exchange. ECT parser: in downstream kernel there is an option to dump ECT tables via some DebugFS file. I did that, and it seems to me it would be easier to just hard code necessary table in corresponding drivers code. E.g., PLL tables can be hard-coded in the clock driver (which is how it seems to be implemented for other Exynos SoC upstream anyway). So I don't think there is a huge need to upstream ECT parser itself. But dumping the tables can be useful to implement corresponding drivers (clocks, DVFS, APM, etc). Investigating downstream clock driver for Exynos850 and its dependencies (like VCLK, RA, CMUCAL), I figured it's much easier to implement the clock driver completely from scratch. Looking into clk-exynos7.c and clk-exynos5433.c implementation, this is probably how upstream design should look like. And it has nothing to do with downstream implementation. E.g., downstream driver has one single CMU node in dts (for the whole clock subsystem), but for upstream drivers we want to have separate nodes for each particular CMU. Also downstream implementation is over-complicated; that might have some sense for the vendor, if they have a bunch of similar SoCs or sharing driver code between different OS kernels, but for upstream kernel it's just unneeded complexity (several layers of abstraction that should be just removed, and useful stuff should be integrated in already existing upstream infrastructure). So I ended up using TRM and trying to make something similar to mentioned upstream drivers. Of course, there are some questions on whether we should use manual clocks control, or rely on automatic clock gating and Q-channel communication. But I'm having some progress already, and hopefully will submit the minimal driver in a week or so. As for downstream design and how to make a sense of it, for converting that to something more upstreamable, here is what I figured. 1. Clock driver (clk-exynosXXXX.c) registers some vclk clocks ("Virtual Clocks"). Those are clocks which will be actually used. But those are lacking any hardware specific data yet (like register offsets, etc). 2. ".calid" field from those vclk's is used to find more hardware-related info (later in run-time) for those registered clocks, from cmucal-node.c file. That file contains actual parent information and some info on HW stuff, but not real addresses/offset, but only indexes. 3. Those indexes are resolved further (in run-time), obtaining actual offsets from cmucal-sfr.c file, in ra_init() function. 4. Instead of using existing CCF clocks, custom vclk clock ops are used. Those are defined in composite.c (has nothing to do with CCF composite clocks). So the whole VCLK type looks like vendor re-implementation of composite clocks. For example, one VCLK clock can have the whole list of clocks which will be controlled via that single VCLK clock, and all operations will be called for each clock from the list. 5. Further those operations are actually calling the code from ra.c, different functions are used for different clock types (PLL_TYPE, MUX_TYPE, etc). So if you're curious about actual ops implementation (like PLL, muxes, etc), just look there. That should be enough to convert downstream driver to upstream one. Basically one can use downstream source code to figure out info about registers and offsets (from cmucal-sfr.c) and info about internal clocks structure from cmucal-node.c and cmucal-vclk.c, and implement everything from scratch using clk-exynos7.c/clk-exynos5433.c as a template. I'd say it's easier to just use TRM for that, though :) As for the broken firmware and clock freq registers: yes, CNTFRQ_EL0 registers wasn't set in EL3 firmware too, so I'm setting the "clock-frequency" property for arch timer in dts as a workaround right now, in my local tree. But I already let vendor guys know about that problem, and they are trying to fix that right now (at least for Exynos850 SoC). Thanks! > > > >> And should I maybe add RFC tag for those? > > > > No need. Drivers can be merged before DTS users. > > > > Best regards, > > Krzysztof > > >
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi new file mode 100644 index 000000000000..4cf0a22cc6db --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi @@ -0,0 +1,782 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source + * + * Copyright (C) 2017 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device + * tree nodes in this file. + */ + +#include <dt-bindings/interrupt-controller/exynos850.h> + +/ { + /* ALIVE */ + pinctrl@11850000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa4: gpa4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpq0: gpq0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* USI_PERI_UART_DBG */ + uart0_bus: uart0-bus { + samsung,pins = "gpq0-0", "gpq0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + decon_f_te_on: decon_f_te_on { + samsung,pins = "gpa4-1"; + samsung,pin-function = <0xf>; + }; + + decon_f_te_off: decon_f_te_off { + samsung,pins = "gpa4-1"; + samsung,pin-function = <0x0>; + }; + + /* I2C_5 | CAM_PMIC_I2C */ + i2c5_bus: i2c5-bus { + samsung,pins = "gpa3-5", "gpa3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* I2C_6 | MOTOR_I2C */ + i2c6_bus: i2c6-bus { + samsung,pins = "gpa3-7", "gpa4-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + /* CMGP */ + pinctrl@11c30000 { + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpm5: gpm5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* usi_cmgp00 */ + hsi2c3_bus: hsi2c3-bus { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* usi_cmgp01 */ + hsi2c4_bus: hsi2c4-bus { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* spi usi_cmgp00 */ + spi1_bus: spi1-bus { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi1_cs: spi1-cs { + samsung,pins = "gpm3-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi1_cs_func: spi1-cs-func { + samsung,pins = "gpm3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + /* spi usi_cmgp01 */ + spi2_bus: spi2-bus { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_cs: spi2-cs { + samsung,pins = "gpm7-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_cs_func: spi2-cs-func { + samsung,pins = "gpm7-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + /* usi_cmgp00_uart */ + uart1_bus_single: uart1-bus { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart1_bus_dual: uart1-bus-dual { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + /* usi_cmgp01_uart */ + uart2_bus_single: uart2-bus { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart2_bus_dual: uart2-bus-dual { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + }; + + /* AUD */ + pinctrl@14a60000 { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk: aud-codec-mclk { + samsung,pins = "gpb0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + }; + + aud_codec_mclk_idle: aud-codec-mclk-idle { + samsung,pins = "gpb0-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + }; + + aud_i2s0_bus: aud-i2s0-bus { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + }; + + aud_i2s0_idle: aud-i2s0-idle { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + }; + + aud_i2s1_bus: aud-i2s1-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + }; + + aud_i2s1_idle: aud-i2s1-idle { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + }; + + aud_fm_bus: aud-fm-bus { + samsung,pins = "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + }; + + aud_fm_idle: aud-fm-idle { + samsung,pins = "gpb1-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + }; + }; + + /* HSI */ + pinctrl@13430000 { + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpf2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpf2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd2_clk_fast_slew_rate_1_5x: sd2-clk_fast_slew_rate_1_5x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <1>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd2_clk_fast_slew_rate_2_5x: sd2-clk_fast_slew_rate_2_5x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <4>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x { + samsung,pins = "gpf2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <5>; + }; + + sd2_pins_as_pdn: sd2-pins-as-pdn { + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <2>; + }; + + }; + + /* CORE */ + pinctrl@12070000 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpf0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpf0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_nreset: sd0-nreset { + samsung,pins = "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_clk_fast_slew_rate_1x: sd0-clk_fast_slew_rate_1x { + samsung,pins = "gpf0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <1>; + }; + + sd0_clk_fast_slew_rate_2x: sd0-clk_fast_slew_rate_2x { + samsung,pins = "gpf0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd0_clk_fast_slew_rate_3x: sd0-clk_fast_slew_rate_3x { + samsung,pins = "gpf0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd0_clk_fast_slew_rate_4x: sd0-clk_fast_slew_rate_4x { + samsung,pins = "gpf0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpf1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + }; + + /* PERI */ + pinctrl@139b0000 { + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp1: gpp1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + xclkout: xclkout { + samsung,pins = "gpq0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + /* usi_hsi2c_0 */ + hsi2c0_bus: hsi2c0-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* usi_hsi2c_1 */ + hsi2c1_bus: hsi2c1-bus { + samsung,pins = "gpc1-2", "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* usi_hsi2c_2 */ + hsi2c2_bus: hsi2c2-bus { + samsung,pins = "gpc1-4", "gpc1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + /* usi_spi_0 */ + spi0_bus: spi0-bus { + samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_cs: spi0-cs { + samsung,pins = "gpp2-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_cs_func: spi0-cs-func { + samsung,pins = "gpp2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + fm_lna_en: fm-lna-en { + samsung,pins = "gpg2-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-val = <0>; + }; + + sensor_mclk0_in: sensor-mclk0-in { + samsung,pins = "gpc0-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sensor_mclk0_out: sensor-mclk0-out { + samsung,pins = "gpc0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <1>; + samsung,pin-drv = <2>; + }; + + sensor_mclk0_fn: sensor-mclk0-fn { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_in: sensor-mclk1-in { + samsung,pins = "gpc0-1"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_out: sensor-mclk1-out { + samsung,pins = "gpc0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <1>; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_fn: sensor-mclk1-fn { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_in: sensor-mclk2-in { + samsung,pins = "gpc0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_out: sensor-mclk2-out { + samsung,pins = "gpc0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <1>; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_fn: sensor-mclk2-fn { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi new file mode 100644 index 000000000000..fb243e0a6260 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos850 SoC USI device tree source + * + * Copyright (C) 2019 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung's Exynos850 SoC USI channels are listed in this file as device tree + * nodes. + */ + +#include <dt-bindings/clock/exynos850.h> + +/ { + aliases { + uart0 = &serial_0; + }; + + /* USI_UART */ + serial_0: uart@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x0 0x13820000 0x100>; + interrupts = <GIC_SPI INTREQ__UART IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + clocks = <&clock GATE_UART_QCH>, <&clock DOUT_UART>; + clock-names = "gate_uart_clk0", "uart"; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi new file mode 100644 index 000000000000..ed2d1c8ae0c3 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Exynos850 SoC device tree source + * + * Copyright (C) 2018 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung Exynos850 SoC device nodes are listed in this file. + * Exynos based board files can include this file and provide + * values for board specific bindings. + */ + +#include <dt-bindings/interrupt-controller/exynos850.h> +#include <dt-bindings/clock/exynos850.h> +#include "exynos850-pinctrl.dtsi" +#include "exynos850-usi.dtsi" + +/ { + compatible = "samsung,exynos850"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <1>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; + pinctrl5 = &pinctrl_5; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0000 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0000>; + enable-method = "psci"; + }; + cpu1: cpu@0001 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0001>; + enable-method = "psci"; + }; + cpu2: cpu@0002 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0002>; + enable-method = "psci"; + }; + cpu3: cpu@0003 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0003>; + enable-method = "psci"; + }; + cpu4: cpu@0004 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0100>; + enable-method = "psci"; + }; + cpu5: cpu@0005 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0101>; + enable-method = "psci"; + }; + cpu6: cpu@0006 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0102>; + enable-method = "psci"; + }; + cpu7: cpu@0007 { + device_type = "cpu"; + compatible = "arm,cortex-a55", "arm,armv8"; + reg = <0x0 0x0103>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + gic: interrupt-controller@12a00000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x12a01000 0x1000>, + <0x0 0x12a02000 0x1000>, + <0x0 0x12a04000 0x2000>, + <0x0 0x12a06000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <26000000>; + use-clocksource-only; + use-physical-timer; + }; + + clock: clock-controller@0x120e0000 { + compatible = "samsung,exynos850-clock"; + reg = <0x0 0x120e0000 0x8000>; + #clock-cells = <1>; + }; + + /* ALIVE */ + pinctrl_0: pinctrl@11850000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x11850000 0x1000>; + interrupts = <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + /* CMGP */ + pinctrl_1: pinctrl@11c30000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x11c30000 0x1000>; + interrupts = + <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM06 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI INTREQ__CMGP_EXT_INTM07 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + /* AUD */ + pinctrl_2: pinctrl@14a60000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x14a60000 0x1000>; + }; + + /* HSI */ + pinctrl_3: pinctrl@13430000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x13430000 0x1000>; + interrupts = <GIC_SPI INTREQ__GPIO_HSI IRQ_TYPE_LEVEL_HIGH>; + }; + + /* CORE */ + pinctrl_4: pinctrl@12070000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x12070000 0x1000>; + interrupts = <GIC_SPI INTREQ__GPIO_CORE IRQ_TYPE_LEVEL_HIGH>; + }; + + /* PERI */ + pinctrl_5: pinctrl@139b0000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x0 0x139b0000 0x1000>; + interrupts = <GIC_SPI INTREQ__GPIO_PERI IRQ_TYPE_LEVEL_HIGH>; + }; +};
Samsung Exynos850 is ARMv8-based mobile-oriented SoC. Features: * CPU: Cortex-A55 Octa (8 cores), up to 2 GHz * Memory interface: LPDDR4/4x 2 channels (12.8 GB/s) * SD/MMC: SD 3.0, eMMC5.1 DDR 8-bit * Modem: 4G LTE, 3G, GSM/GPRS/EDGE * RF: Quad GNSS, WiFi 5 (802.11ac), Bluetooth 5.0 * GPU: Mali-G52 MP1 * Codec: 1080p 60fps H64, HEVC, JPEG HW Codec * Display: Full HD+ (2520x1080)@60fps LCD * Camera: 16+5MP/13+8MP ISP, MIPI CSI 4/4/2, FD, DRC * Connectivity: USB 2.0 DRD, USI (SPI/UART/I2C), HSI2C, I3C, ADC, Audio This patch adds minimal SoC support. Particular board device tree files can include exynos850.dtsi file to get SoC related nodes, and then reference those nodes further as needed. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- .../boot/dts/exynos/exynos850-pinctrl.dtsi | 782 ++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos850-usi.dtsi | 30 + arch/arm64/boot/dts/exynos/exynos850.dtsi | 245 ++++++ 3 files changed, 1057 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos850-usi.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi