| Message ID | 20211226153624.162281-11-marcan@marcan.st |
|---|---|
| State | Superseded |
| Headers | show |
| Series | brcmfmac: Support Apple T2 and M1 platforms | expand |
On Sun, Dec 26, 2021 at 4:37 PM Hector Martin <marcan@marcan.st> wrote: > On Device Tree platforms, it is customary to be able to set the MAC > address via the Device Tree, as it is often stored in system firmware. > This is particularly relevant for Apple ARM64 platforms, where this > information comes from system configuration and passed through by the > bootloader into the DT. > > Implement support for this by fetching the platform MAC address and > adding or replacing the macaddr= property in nvram. This becomes the > dongle's default MAC address. > > On platforms with an SROM MAC address, this overrides it. On platforms > without one, such as Apple ARM64 devices, this is required for the > firmware to boot (it will fail if it does not have a valid MAC at all). > > Signed-off-by: Hector Martin <marcan@marcan.st> This looks very helpful. > + /* Add space for properties we may add */ > + size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1; > + size += BRCMF_FW_MACADDR_LEN + 1; Add some note to the commit log why you also make space for boardrev? (Looks useful.) Is the boardrev spacing in the right patch? With that addressed: Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
On 2022/01/02 14:50, Linus Walleij wrote: > On Sun, Dec 26, 2021 at 4:37 PM Hector Martin <marcan@marcan.st> wrote: > >> On Device Tree platforms, it is customary to be able to set the MAC >> address via the Device Tree, as it is often stored in system firmware. >> This is particularly relevant for Apple ARM64 platforms, where this >> information comes from system configuration and passed through by the >> bootloader into the DT. >> >> Implement support for this by fetching the platform MAC address and >> adding or replacing the macaddr= property in nvram. This becomes the >> dongle's default MAC address. >> >> On platforms with an SROM MAC address, this overrides it. On platforms >> without one, such as Apple ARM64 devices, this is required for the >> firmware to boot (it will fail if it does not have a valid MAC at all). >> >> Signed-off-by: Hector Martin <marcan@marcan.st> > > This looks very helpful. > >> + /* Add space for properties we may add */ >> + size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1; >> + size += BRCMF_FW_MACADDR_LEN + 1; > > Add some note to the commit log why you also make space for > boardrev? (Looks useful.) Is the boardrev spacing in the right > patch? Ah, that was a drive-by fix. While adding the MACADDR space I noticed we weren't allocating space for BOARDREV... not sure if any platforms hit this; it would cause an overflow if there are platforms with no board_rev in the nvram that also don't have enough comments/junk to otherwise make space for it. I'll move it to another patch so it's more evident, and it should get a Fixes: too.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c index 51d5d2b88ee6..d3834d5bc9ea 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -21,6 +21,8 @@ #define BRCMF_FW_NVRAM_DEVPATH_LEN 19 /* devpath0=pcie/1/4/ */ #define BRCMF_FW_NVRAM_PCIEDEV_LEN 10 /* pcie/1/4/ + \0 */ #define BRCMF_FW_DEFAULT_BOARDREV "boardrev=0xff" +#define BRCMF_FW_MACADDR_FMT "macaddr=%pM" +#define BRCMF_FW_MACADDR_LEN (7 + ETH_ALEN * 3) enum nvram_parser_state { IDLE, @@ -57,6 +59,7 @@ struct nvram_parser { bool multi_dev_v1; bool multi_dev_v2; bool boardrev_found; + bool strip_mac; }; /* @@ -121,6 +124,10 @@ static enum nvram_parser_state brcmf_nvram_handle_key(struct nvram_parser *nvp) nvp->multi_dev_v2 = true; if (strncmp(&nvp->data[nvp->entry], "boardrev", 8) == 0) nvp->boardrev_found = true; + /* strip macaddr if platform MAC overrides */ + if (nvp->strip_mac && + strncmp(&nvp->data[nvp->entry], "macaddr", 7) == 0) + st = COMMENT; } else if (!is_nvram_char(c) || c == ' ') { brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n", nvp->line, nvp->column); @@ -207,6 +214,9 @@ static int brcmf_init_nvram_parser(struct nvram_parser *nvp, size = BRCMF_FW_MAX_NVRAM_SIZE; else size = data_len; + /* Add space for properties we may add */ + size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1; + size += BRCMF_FW_MACADDR_LEN + 1; /* Alloc for extra 0 byte + roundup by 4 + length field */ size += 1 + 3 + sizeof(u32); nvp->nvram = kzalloc(size, GFP_KERNEL); @@ -366,22 +376,34 @@ static void brcmf_fw_add_defaults(struct nvram_parser *nvp) nvp->nvram_len++; } +static void brcmf_fw_add_macaddr(struct nvram_parser *nvp, u8 *mac) +{ + snprintf(&nvp->nvram[nvp->nvram_len], BRCMF_FW_MACADDR_LEN + 1, + BRCMF_FW_MACADDR_FMT, mac); + nvp->nvram_len += BRCMF_FW_MACADDR_LEN + 1; +} + /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil * and ending in a NUL. Removes carriage returns, empty lines, comment lines, * and converts newlines to NULs. Shortens buffer as needed and pads with NULs. * End of buffer is completed with token identifying length of buffer. */ static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len, - u32 *new_length, u16 domain_nr, u16 bus_nr) + u32 *new_length, u16 domain_nr, u16 bus_nr, + struct device *dev) { struct nvram_parser nvp; u32 pad; u32 token; __le32 token_le; + u8 mac[ETH_ALEN]; if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0) return NULL; + if (eth_platform_get_mac_address(dev, mac) == 0) + nvp.strip_mac = true; + while (nvp.pos < data_len) { nvp.state = nv_parser_states[nvp.state](&nvp); if (nvp.state == END) @@ -402,6 +424,9 @@ static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len, brcmf_fw_add_defaults(&nvp); + if (nvp.strip_mac) + brcmf_fw_add_macaddr(&nvp, mac); + pad = nvp.nvram_len; *new_length = roundup(nvp.nvram_len + 1, 4); while (pad != *new_length) { @@ -546,7 +571,8 @@ static int brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx) if (data) nvram = brcmf_fw_nvram_strip(data, data_len, &nvram_length, fwctx->req->domain_nr, - fwctx->req->bus_nr); + fwctx->req->bus_nr, + fwctx->dev); if (free_bcm47xx_nvram) bcm47xx_nvram_release_contents(data);
On Device Tree platforms, it is customary to be able to set the MAC address via the Device Tree, as it is often stored in system firmware. This is particularly relevant for Apple ARM64 platforms, where this information comes from system configuration and passed through by the bootloader into the DT. Implement support for this by fetching the platform MAC address and adding or replacing the macaddr= property in nvram. This becomes the dongle's default MAC address. On platforms with an SROM MAC address, this overrides it. On platforms without one, such as Apple ARM64 devices, this is required for the firmware to boot (it will fail if it does not have a valid MAC at all). Signed-off-by: Hector Martin <marcan@marcan.st> --- .../broadcom/brcm80211/brcmfmac/firmware.c | 30 +++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-)