| Message ID | 1639680494-23183-9-git-send-email-abel.vesa@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: Add i.MX8DXL initial support | expand |
On Thu, Dec 16, 2021 at 08:48:12PM +0200, Abel Vesa wrote: > From: Jacky Bai <ping.bai@nxp.com> > > Add i.MX8DXL EVK board support. > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ > 2 files changed, 267 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 5018b8b1e5f2..f117d3e811ba 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb Keep the list sorted. > dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > new file mode 100644 > index 000000000000..68dfe722af6d > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > @@ -0,0 +1,266 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2019-2021 NXP > + */ > + > +/dts-v1/; > + > +#include "imx8dxl.dtsi" > + > +/ { > + model = "Freescale i.MX8DXL EVK"; > + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl"; > + > + chosen { > + stdout-path = &lpuart0; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x00000000 0x80000000 0 0x40000000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* > + * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 > + * Shouldn't be used at A core and Linux side. > + * > + */ > + m4_reserved: m4@88000000 { > + no-map; > + reg = <0 0x88000000 0 0x8000000>; > + }; > + > + /* global autoconfigured region for contiguous allocations */ > + linux,cma { > + compatible = "shared-dma-pool"; > + reusable; > + size = <0 0x14000000>; > + alloc-ranges = <0 0x98000000 0 0x14000000>; > + linux,cma-default; > + }; > + }; > + > + reg_usdhc2_vmmc: usdhc2-vmmc { > + compatible = "regulator-fixed"; > + regulator-name = "SD1_SPWR"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + off-on-delay-us = <3480>; > + }; > +}; > + > +&lpuart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lpuart0>; > + status = "okay"; > +}; > + > +&lpuart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lpuart1>; > + status = "okay"; > +}; > + > +&lsio_gpio4 { > + status = "okay"; > +}; > + > +&lsio_gpio5 { > + status = "okay"; > +}; > + > +&thermal_zones { > + pmic-thermal0 { > + polling-delay-passive = <250>; > + polling-delay = <2000>; > + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; Have a newline between property and child node. > + trips { > + pmic_alert0: trip0 { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "passive"; > + }; Have a newline between nodes. > + pmic_crit0: trip1 { > + temperature = <125000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + cooling-maps { > + map0 { > + trip = <&pmic_alert0>; > + cooling-device = > + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > +}; > + > +&usdhc1 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; > + bus-width = <8>; > + no-sd; > + no-sdio; > + non-removable; > + status = "okay"; One level of indent is good enough. > +}; > + > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + bus-width = <4>; > + vmmc-supply = <®_usdhc2_vmmc>; > + cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; > + wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; > + max-frequency = <100000000>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + pinctrl_hog: hoggrp { > + fsl,pins = < > + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 > + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0 > + IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c > + IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021 > + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021 > + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021 > + >; > + }; > + > + pinctrl_lpuart0: lpuart0grp { > + fsl,pins = < > + IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020 > + IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 > + >; > + }; > + > + pinctrl_lpuart1: lpuart1grp { > + fsl,pins = < > + IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020 > + IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020 > + IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020 > + IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { For sake of consistency, we probably should still end the node name with 'grp'. Shawn > + fsl,pins = < > + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { > + fsl,pins = < > + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */ > + IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */ > + IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */ > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 > + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 > + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { > + fsl,pins = < > + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 > + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 > + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { > + fsl,pins = < > + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 > + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 > + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 > + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 > + >; > + }; > +}; > -- > 2.31.1 >
On 22-01-26 20:53:55, Shawn Guo wrote: > On Thu, Dec 16, 2021 at 08:48:12PM +0200, Abel Vesa wrote: > > From: Jacky Bai <ping.bai@nxp.com> > > > > Add i.MX8DXL EVK board support. > > > > Signed-off-by: Jacky Bai <ping.bai@nxp.com> > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > > --- > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ > > 2 files changed, 267 insertions(+) > > create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > > > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > > index 5018b8b1e5f2..f117d3e811ba 100644 > > --- a/arch/arm64/boot/dts/freescale/Makefile > > +++ b/arch/arm64/boot/dts/freescale/Makefile > > @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb > > +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb > > Keep the list sorted. > > > dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb > > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb > > diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > > new file mode 100644 > > index 000000000000..68dfe722af6d > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts > > @@ -0,0 +1,266 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * Copyright 2019-2021 NXP > > + */ > > + > > +/dts-v1/; > > + > > +#include "imx8dxl.dtsi" > > + > > +/ { > > + model = "Freescale i.MX8DXL EVK"; > > + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl"; > > + > > + chosen { > > + stdout-path = &lpuart0; > > + }; > > + > > + memory@80000000 { > > + device_type = "memory"; > > + reg = <0x00000000 0x80000000 0 0x40000000>; > > + }; ... > > + pinctrl_usdhc1: usdhc1grp { > > + fsl,pins = < > > + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > > + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > > + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > > + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > > + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > > + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > > + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > > + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > > + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > > + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > > + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > > + >; > > + }; > > + > > + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { > > For sake of consistency, we probably should still end the node name with 'grp'. > I think we should either leave as is or use usdhc1-100mhz-grp. I, for one, would leave as is and then maybe we can do a replace for all imx platforms as a separate patch at some point. Let me know what you would prefer. All other comments will be addressed in the next version of this patchset. > Shawn > > > + fsl,pins = < > > + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 > > + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 > > + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 > > + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 > > + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 > > + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 > > + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 > > + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 > > + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 > > + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 > > + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 > > + >; > > + }; > > + ... > > + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { > > + fsl,pins = < > > + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 > > + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 > > + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 > > + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 > > + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 > > + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 > > + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 > > + >; > > + }; > > +}; > > -- > > 2.31.1 > >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 5018b8b1e5f2..f117d3e811ba 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file mode 100644 index 000000000000..68dfe722af6d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + */ + +/dts-v1/; + +#include "imx8dxl.dtsi" + +/ { + model = "Freescale i.MX8DXL EVK"; + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl"; + + chosen { + stdout-path = &lpuart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 + * Shouldn't be used at A core and Linux side. + * + */ + m4_reserved: m4@88000000 { + no-map; + reg = <0 0x88000000 0 0x8000000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x14000000>; + alloc-ranges = <0 0x98000000 0 0x14000000>; + linux,cma-default; + }; + }; + + reg_usdhc2_vmmc: usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <3480>; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&lsio_gpio4 { + status = "okay"; +}; + +&lsio_gpio5 { + status = "okay"; +}; + +&thermal_zones { + pmic-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; + max-frequency = <100000000>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD 0x000014a0 + IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1 0x0600004c + IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN 0x0600004c + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA 0x06000021 + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL 0x06000021 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA 0x06000021 + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL 0x06000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8DXL_UART0_RX_ADMA_UART0_RX 0x06000020 + IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8DXL_UART1_TX_ADMA_UART1_TX 0x06000020 + IMX8DXL_UART1_RX_ADMA_UART1_RX 0x06000020 + IMX8DXL_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020 + IMX8DXL_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x00000040 /* RESET_B */ + IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x00000021 /* WP */ + IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x00000021 /* CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK 0x06000041 + IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021 + IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021 + IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021 + IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021 + IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021 + IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT 0x00000021 + >; + }; +};