@@ -222,7 +222,7 @@ Virtio device config space
:size: a 32-bit configuration space access size in bytes
:flags: a 32-bit value:
- - 0: Vhost master messages used for writeable fields
+ - 0: Vhost master messages used for writable fields
- 1: Vhost master messages used for live migration
:payload: Size bytes array holding the contents of the virtio
@@ -153,7 +153,7 @@ change the contents of the memory at runtime, specifically when starting a
backed-up or snapshotted image. In order to do this, QEMU must know the
address that has been allocated.
-The mechanism chosen for this memory sharing is writeable fw_cfg blobs.
+The mechanism chosen for this memory sharing is writable fw_cfg blobs.
These are data object that are visible to both QEMU and guests, and are
addressable as sequential files.
@@ -164,7 +164,7 @@ Two fw_cfg blobs are used in this case:
/etc/vmgenid_guid - contains the actual VM Generation ID GUID
- read-only to the guest
/etc/vmgenid_addr - contains the address of the downloaded vmgenid blob
- - writeable by the guest
+ - writable by the guest
QEMU sends the following commands to the guest at startup:
@@ -633,7 +633,7 @@ struct mfi_ctrl_props {
* metadata and user data
* 1=5%, 2=10%, 3=15% and so on
*/
- uint8_t viewSpace; /* snapshot writeable VIEWs
+ uint8_t viewSpace; /* snapshot writable VIEWs
* capacity as a % of source LD
* capacity. 0=READ only
* 1=5%, 2=10%, 3=15% and so on
@@ -1255,7 +1255,7 @@ enum MVEECIState {
#define PMCRP 0x2
#define PMCRE 0x1
/*
- * Mask of PMCR bits writeable by guest (not including WO bits like C, P,
+ * Mask of PMCR bits writable by guest (not including WO bits like C, P,
* which can be written as 1 to trigger behaviour but which stay RAZ).
*/
#define PMCR_WRITEABLE_MASK (PMCRLC | PMCRDP | PMCRX | PMCRD | PMCRE)
@@ -120,12 +120,12 @@ static void hvf_set_phys_mem(MemoryRegionSection *section, bool add)
{
hvf_slot *mem;
MemoryRegion *area = section->mr;
- bool writeable = !area->readonly && !area->rom_device;
+ bool writable = !area->readonly && !area->rom_device;
hv_memory_flags_t flags;
uint64_t page_size = qemu_real_host_page_size;
if (!memory_region_is_ram(area)) {
- if (writeable) {
+ if (writable) {
return;
} else if (!memory_region_is_romd(area)) {
/*
@@ -1346,13 +1346,13 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
KVMSlot *mem;
int err;
MemoryRegion *mr = section->mr;
- bool writeable = !mr->readonly && !mr->rom_device;
+ bool writable = !mr->readonly && !mr->rom_device;
hwaddr start_addr, size, slot_size, mr_offset;
ram_addr_t ram_start_offset;
void *ram;
if (!memory_region_is_ram(mr)) {
- if (writeable || !kvm_readonly_mem_allowed) {
+ if (writable || !kvm_readonly_mem_allowed) {
return;
} else if (!mr->romd_mode) {
/* If the memory device is not in romd_mode, then we actually want
@@ -101,10 +101,10 @@ MMUAccessType adjust_signal_pc(uintptr_t *pc, bool is_write)
* Return true if the write fault has been handled, and should be re-tried.
*
* Note that it is important that we don't call page_unprotect() unless
- * this is really a "write to nonwriteable page" fault, because
+ * this is really a "write to nonwritable page" fault, because
* page_unprotect() assumes that if it is called for an access to
- * a page that's writeable this means we had two threads racing and
- * another thread got there first and already made the page writeable;
+ * a page that's writable this means we had two threads racing and
+ * another thread got there first and already made the page writable;
* so we will retry the access. If we were to call page_unprotect()
* for some other kind of fault that should really be passed to the
* guest, we'd end up in an infinite loop of retrying the faulting access.
@@ -249,7 +249,7 @@ void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker)
for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
/*
* Initialize the value of read_ack_register to 1, so GHES can be
- * writeable after (re)boot.
+ * writable after (re)boot.
* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
* (GHESv2 - Type 10)
*/
@@ -1893,7 +1893,7 @@ static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_CBPR;
}
- /* The only bit stored in icc_ctlr_el3 which is writeable is EOIMODE_EL3: */
+ /* The only bit stored in icc_ctlr_el3 which is writable is EOIMODE_EL3: */
mask = ICC_CTLR_EL3_EOIMODE_EL3;
cs->icc_ctlr_el3 &= ~mask;
@@ -610,7 +610,7 @@ static bool gicd_writel(GICv3State *s, hwaddr offset,
if (value & mask & GICD_CTLR_DS) {
/* We just set DS, so the ARE_NS and EnG1S bits are now RES0.
* Note that this is a one-way transition because if DS is set
- * then it's not writeable, so it can only go back to 0 with a
+ * then it's not writable, so it can only go back to 0 with a
* hardware reset.
*/
s->gicd_ctlr &= ~(GICD_CTLR_EN_GRP1S | GICD_CTLR_ARE_NS);
@@ -267,7 +267,7 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset,
/* RAZ/WI for our implementation */
return MEMTX_OK;
case GICR_WAKER:
- /* Only the ProcessorSleep bit is writeable. When the guest sets
+ /* Only the ProcessorSleep bit is writable. When the guest sets
* it it requests that we transition the channel between the
* redistributor and the cpu interface to quiescent, and that
* we set the ChildrenAsleep bit once the inteface has reached the
@@ -399,7 +399,7 @@ static void riscv_aclint_swi_realize(DeviceState *dev, Error **errp)
/* Claim software interrupt bits */
for (i = 0; i < swi->num_harts; i++) {
RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(swi->hartid_base + i));
- /* We don't claim mip.SSIP because it is writeable by software */
+ /* We don't claim mip.SSIP because it is writable by software */
if (riscv_cpu_claim_interrupts(cpu, swi->sswi ? 0 : MIP_MSIP) < 0) {
error_report("MSIP already claimed");
exit(1);
@@ -646,7 +646,7 @@ static void riscv_aplic_write(void *opaque, hwaddr addr, uint64_t value,
}
if (addr == APLIC_DOMAINCFG) {
- /* Only IE bit writeable at the moment */
+ /* Only IE bit writable at the moment */
value &= APLIC_DOMAINCFG_IE;
aplic->domaincfg = value;
} else if ((APLIC_SOURCECFG_BASE <= addr) &&
@@ -456,7 +456,7 @@ static int shpc_cap_add_config(PCIDevice *d, Error **errp)
pci_set_byte(config + SHPC_CAP_CxP, 0);
pci_set_long(config + SHPC_CAP_DWORD_DATA, 0);
d->shpc->cap = config_offset;
- /* Make dword select and data writeable. */
+ /* Make dword select and data writable. */
pci_set_byte(d->wmask + config_offset + SHPC_CAP_DWORD_SELECT, 0xff);
pci_set_long(d->wmask + config_offset + SHPC_CAP_DWORD_DATA, 0xffffffff);
return 0;
@@ -324,7 +324,7 @@ static void sse_timer_write(void *opaque, hwaddr offset, uint64_t value,
{
uint32_t old_ctl = s->cntp_aival_ctl;
- /* EN bit is writeable; CLR bit is write-0-to-clear, write-1-ignored */
+ /* EN bit is writable; CLR bit is write-0-to-clear, write-1-ignored */
s->cntp_aival_ctl &= ~R_CNTP_AIVAL_CTL_EN_MASK;
s->cntp_aival_ctl |= value & R_CNTP_AIVAL_CTL_EN_MASK;
if (!(value & R_CNTP_AIVAL_CTL_CLR_MASK)) {
@@ -117,7 +117,7 @@ int arm_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
/*
* Don't allow writing to XPSR.Exception as it can cause
* a transition into or out of handler mode (it's not
- * writeable via the MSR insn so this is a reasonable
+ * writable via the MSR insn so this is a reasonable
* restriction). Other fields are safe to update.
*/
xpsr_write(env, tmp, ~XPSR_EXCP);
@@ -103,7 +103,7 @@ static void x86_cpu_to_dict(X86CPU *cpu, QDict *props)
/* Convert CPU model data from X86CPU object to a property dictionary
* that can recreate exactly the same CPU model, including every
- * writeable QOM property.
+ * writable QOM property.
*/
static void x86_cpu_to_dict_full(X86CPU *cpu, QDict *props)
{
@@ -284,7 +284,7 @@ void ioinst_handle_stsch(S390CPU *cpu, uint64_t reg1, uint32_t ipb,
g_assert(!s390_is_pv());
/*
* As operand exceptions have a lower priority than access exceptions,
- * we check whether the memory area is writeable (injecting the
+ * we check whether the memory area is writable (injecting the
* access execption if it is not) first.
*/
if (!s390_cpu_virt_mem_check_write(cpu, addr, ar, sizeof(schib))) {
@@ -500,7 +500,7 @@ def _early_cleanup(self) -> None:
"""
# If we keep the console socket open, we may deadlock waiting
# for QEMU to exit, while QEMU is waiting for the socket to
- # become writeable.
+ # become writable.
if self._console_socket is not None:
self._console_socket.close()
self._console_socket = None
@@ -56,7 +56,7 @@
*
* - `ebx`: contains the physical memory address where the loader has placed
* the boot start info structure.
- * - `cr0`: bit 0 (PE) must be set. All the other writeable bits are cleared.
+ * - `cr0`: bit 0 (PE) must be set. All the other writable bits are cleared.
* - `cr4`: all bits are cleared.
* - `cs `: must be a 32-bit read/execute code segment with a base of ‘0’
* and a limit of ‘0xFFFFFFFF’. The selector value is unspecified.
We have about 25 instances of the typo/variant spelling 'writeable', and over 500 of the more common 'writable'. Standardize on the latter. Change produced with: sed -i -e 's/writeable/writable/g' $(git grep -l writeable) and then hand-undoing the instance in linux-headers/linux/kvm.h. All these changes are in comments or documentation, except for the two local variables in accel/hvf/hvf-accel-ops.c and accel/kvm/kvm-all.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/interop/vhost-user.rst | 2 +- docs/specs/vmgenid.txt | 4 ++-- hw/scsi/mfi.h | 2 +- target/arm/internals.h | 2 +- accel/hvf/hvf-accel-ops.c | 4 ++-- accel/kvm/kvm-all.c | 4 ++-- accel/tcg/user-exec.c | 6 +++--- hw/acpi/ghes.c | 2 +- hw/intc/arm_gicv3_cpuif.c | 2 +- hw/intc/arm_gicv3_dist.c | 2 +- hw/intc/arm_gicv3_redist.c | 2 +- hw/intc/riscv_aclint.c | 2 +- hw/intc/riscv_aplic.c | 2 +- hw/pci/shpc.c | 2 +- hw/timer/sse-timer.c | 2 +- target/arm/gdbstub.c | 2 +- target/i386/cpu-sysemu.c | 2 +- target/s390x/ioinst.c | 2 +- python/qemu/machine/machine.py | 2 +- tests/tcg/x86_64/system/boot.S | 2 +- 20 files changed, 25 insertions(+), 25 deletions(-)