diff mbox series

[06/10] mfd: axp20x: Add support for AXP192

Message ID 20220603135714.12007-7-aidanmacdonald.0x0@gmail.com
State Superseded
Headers show
Series Add support for AXP192 PMIC | expand

Commit Message

Aidan MacDonald June 3, 2022, 1:57 p.m. UTC
The AXP192 PMIC is similar to the AXP202/AXP209, but with different
regulators, additional GPIOs, and a different IRQ register layout.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
 drivers/mfd/axp20x-i2c.c   |   2 +
 drivers/mfd/axp20x.c       | 150 +++++++++++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h |  84 +++++++++++++++++++++
 3 files changed, 236 insertions(+)

Comments

Lee Jones June 27, 2022, 11:54 a.m. UTC | #1
On Fri, 03 Jun 2022, Aidan MacDonald wrote:

> The AXP192 PMIC is similar to the AXP202/AXP209, but with different
> regulators, additional GPIOs, and a different IRQ register layout.
> 
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
>  drivers/mfd/axp20x-i2c.c   |   2 +
>  drivers/mfd/axp20x.c       | 150 +++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h |  84 +++++++++++++++++++++
>  3 files changed, 236 insertions(+)
> 
> diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
> index 00ab48018d8d..9ada58fad77f 100644
> --- a/drivers/mfd/axp20x-i2c.c
> +++ b/drivers/mfd/axp20x-i2c.c
> @@ -62,6 +62,7 @@ static int axp20x_i2c_remove(struct i2c_client *i2c)
>  #ifdef CONFIG_OF
>  static const struct of_device_id axp20x_i2c_of_match[] = {
>  	{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
> +	{ .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
>  	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
>  	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
>  	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
> @@ -75,6 +76,7 @@ MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
>  
>  static const struct i2c_device_id axp20x_i2c_id[] = {
>  	{ "axp152", 0 },
> +	{ "axp192", 0 },
>  	{ "axp202", 0 },
>  	{ "axp209", 0 },
>  	{ "axp221", 0 },
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 8161a5dc68e8..7f64e5c83fe2 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -34,6 +34,7 @@
>  
>  static const char * const axp20x_model_names[] = {
>  	"AXP152",
> +	"AXP192",
>  	"AXP202",
>  	"AXP209",
>  	"AXP221",
> @@ -92,6 +93,35 @@ static const struct regmap_access_table axp20x_volatile_table = {
>  	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
>  };
>  
> +static const struct regmap_range axp192_writeable_ranges[] = {
> +	regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
> +	regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
> +	regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
> +	regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
> +};
> +
> +static const struct regmap_range axp192_volatile_ranges[] = {
> +	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
> +	regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
> +	regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
> +	regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
> +	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
> +	regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
> +	regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
> +	regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
> +	regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
> +};
> +
> +static const struct regmap_access_table axp192_writeable_table = {
> +	.yes_ranges	= axp192_writeable_ranges,
> +	.n_yes_ranges	= ARRAY_SIZE(axp192_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp192_volatile_table = {
> +	.yes_ranges	= axp192_volatile_ranges,
> +	.n_yes_ranges	= ARRAY_SIZE(axp192_volatile_ranges),
> +};
> +
>  /* AXP22x ranges are shared with the AXP809, as they cover the same range */
>  static const struct regmap_range axp22x_writeable_ranges[] = {
>  	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> @@ -173,6 +203,25 @@ static const struct resource axp152_pek_resources[] = {
>  	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
>  };
>  
> +static const struct resource axp192_gpio_resources[] = {
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO0_INPUT, "GPIO0"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO1_INPUT, "GPIO1"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO2_INPUT, "GPIO2"),
> +};
> +
> +static const struct resource axp192_ac_power_supply_resources[] = {
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
> +};
> +
> +static const struct resource axp192_usb_power_supply_resources[] = {
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
> +};
> +
>  static const struct resource axp20x_ac_power_supply_resources[] = {
>  	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
>  	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
> @@ -245,6 +294,15 @@ static const struct regmap_config axp152_regmap_config = {
>  	.cache_type	= REGCACHE_RBTREE,
>  };
>  
> +static const struct regmap_config axp192_regmap_config = {
> +	.reg_bits	= 8,
> +	.val_bits	= 8,
> +	.wr_table	= &axp192_writeable_table,
> +	.volatile_table	= &axp192_volatile_table,
> +	.max_register	= AXP20X_CC_CTRL,
> +	.cache_type	= REGCACHE_RBTREE,
> +};
> +
>  static const struct regmap_config axp20x_regmap_config = {
>  	.reg_bits	= 8,
>  	.val_bits	= 8,
> @@ -304,6 +362,55 @@ static const struct regmap_irq axp152_regmap_irqs[] = {
>  	INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,		2, 0),
>  };
>  
> +static const struct regmap_irq axp192_regmap_irqs[] = {
> +	INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V,		0, 7),
> +	INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN,		0, 6),
> +	INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL,		0, 5),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V,		0, 4),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN,		0, 3),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL,		0, 2),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW,		0, 1),
> +	INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN,		1, 7),
> +	INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL,	        1, 6),
> +	INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE,	1, 5),
> +	INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE,	1, 4),
> +	INIT_REGMAP_IRQ(AXP192, CHARG,		        1, 3),
> +	INIT_REGMAP_IRQ(AXP192, CHARG_DONE,		1, 2),
> +	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH,	        1, 1),
> +	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW,	        1, 0),
> +	INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH,	        2, 7),
> +	INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW,		2, 6),
> +	INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG,	        2, 5),
> +	INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG,	        2, 4),
> +	INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG,	        2, 3),
> +	INIT_REGMAP_IRQ(AXP192, PEK_SHORT,		2, 1),
> +	INIT_REGMAP_IRQ(AXP192, PEK_LONG,		2, 0),
> +	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON,		3, 7),
> +	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF,	        3, 6),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_VALID,		3, 5),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID,	        3, 4),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID,	3, 3),
> +	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END,	        3, 2),
> +	INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL,	        3, 0),
> +	INIT_REGMAP_IRQ(AXP192, TIMER,			4, 7),
> +	INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT,		4, 2),
> +	INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT,		4, 1),
> +	INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT,		4, 0),
> +};
> +
> +static int axp192_get_irq_reg(unsigned int base_reg, int i)

Nit: If you have to respin this set, please rename 'i'.

Unless used as an iterator, 'i' is a terrible variable name.

> +{
> +	/* linear mapping for IRQ1 to IRQ4 */
> +	if (i < 4)
> +		return base_reg + i;
> +
> +	/* handle IRQ5 separately */
> +	if (base_reg == AXP192_IRQ1_EN)
> +		return AXP192_IRQ5_EN;
> +	else
> +		return AXP192_IRQ5_STATE;
> +}
> +
>  static const struct regmap_irq axp20x_regmap_irqs[] = {
>  	INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7),
>  	INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6),
> @@ -514,6 +621,19 @@ static const struct regmap_irq_chip axp152_regmap_irq_chip = {
>  	.num_regs		= 3,
>  };
>  
> +static const struct regmap_irq_chip axp192_regmap_irq_chip = {
> +	.name			= "axp192_irq_chip",
> +	.status_base		= AXP192_IRQ1_STATE,
> +	.ack_base		= AXP192_IRQ1_STATE,
> +	.mask_base		= AXP192_IRQ1_EN,
> +	.mask_invert		= true,
> +	.init_ack_masked	= true,
> +	.irqs			= axp192_regmap_irqs,
> +	.num_irqs		= ARRAY_SIZE(axp192_regmap_irqs),
> +	.num_regs		= 5,
> +	.get_irq_reg		= axp192_get_irq_reg,
> +};
> +
>  static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
>  	.name			= "axp20x_irq_chip",
>  	.status_base		= AXP20X_IRQ1_STATE,
> @@ -588,6 +708,30 @@ static const struct regmap_irq_chip axp809_regmap_irq_chip = {
>  	.num_regs		= 5,
>  };
>  
> +static const struct mfd_cell axp192_cells[] = {
> +	{
> +		.name		= "axp192-gpio",
> +		.of_compatible	= "x-powers,axp192-gpio",
> +		.num_resources	= ARRAY_SIZE(axp192_gpio_resources),
> +		.resources	= axp192_gpio_resources,
> +	}, {
> +		.name		= "axp20x-regulator",

Nit: Is it possible to put one line entries at the bottom?

And format like this:

    { .name = "axp20x-regulator" }

> +	}, {
> +		.name		= "axp192-adc",
> +		.of_compatible	= "x-powers,axp192-adc",
> +	}, {
> +		.name		= "axp20x-ac-power-supply",
> +		.of_compatible	= "x-powers,axp202-ac-power-supply",
> +		.num_resources	= ARRAY_SIZE(axp192_ac_power_supply_resources),
> +		.resources	= axp192_ac_power_supply_resources,
> +	}, {
> +		.name		= "axp20x-usb-power-supply",
> +		.of_compatible	= "x-powers,axp192-usb-power-supply",
> +		.num_resources	= ARRAY_SIZE(axp192_usb_power_supply_resources),
> +		.resources	= axp192_usb_power_supply_resources,
> +	}
> +};

For my own reference (apply this as-is to your sign-off block):

  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Aidan MacDonald June 27, 2022, 1:02 p.m. UTC | #2
Lee Jones <lee.jones@linaro.org> writes:

> On Fri, 03 Jun 2022, Aidan MacDonald wrote:
>
>> The AXP192 PMIC is similar to the AXP202/AXP209, but with different
>> regulators, additional GPIOs, and a different IRQ register layout.
>> 
>> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
>> ---
>>  drivers/mfd/axp20x-i2c.c   |   2 +
>>  drivers/mfd/axp20x.c       | 150 +++++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/axp20x.h |  84 +++++++++++++++++++++
>>  3 files changed, 236 insertions(+)
>> 
>> diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
>> index 00ab48018d8d..9ada58fad77f 100644
>> --- a/drivers/mfd/axp20x-i2c.c
>> +++ b/drivers/mfd/axp20x-i2c.c
>> @@ -62,6 +62,7 @@ static int axp20x_i2c_remove(struct i2c_client *i2c)
>>  #ifdef CONFIG_OF
>>  static const struct of_device_id axp20x_i2c_of_match[] = {
>>  	{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
>> +	{ .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
>>  	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
>>  	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
>>  	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
>> @@ -75,6 +76,7 @@ MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
>>  
>>  static const struct i2c_device_id axp20x_i2c_id[] = {
>>  	{ "axp152", 0 },
>> +	{ "axp192", 0 },
>>  	{ "axp202", 0 },
>>  	{ "axp209", 0 },
>>  	{ "axp221", 0 },
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index 8161a5dc68e8..7f64e5c83fe2 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -34,6 +34,7 @@
>>  
>>  static const char * const axp20x_model_names[] = {
>>  	"AXP152",
>> +	"AXP192",
>>  	"AXP202",
>>  	"AXP209",
>>  	"AXP221",
>> @@ -92,6 +93,35 @@ static const struct regmap_access_table axp20x_volatile_table = {
>>  	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
>>  };
>>  
>> +static const struct regmap_range axp192_writeable_ranges[] = {
>> +	regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
>> +	regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
>> +	regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
>> +	regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
>> +};
>> +
>> +static const struct regmap_range axp192_volatile_ranges[] = {
>> +	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
>> +	regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
>> +	regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
>> +	regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
>> +	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
>> +	regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
>> +	regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
>> +	regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
>> +	regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
>> +};
>> +
>> +static const struct regmap_access_table axp192_writeable_table = {
>> +	.yes_ranges	= axp192_writeable_ranges,
>> +	.n_yes_ranges	= ARRAY_SIZE(axp192_writeable_ranges),
>> +};
>> +
>> +static const struct regmap_access_table axp192_volatile_table = {
>> +	.yes_ranges	= axp192_volatile_ranges,
>> +	.n_yes_ranges	= ARRAY_SIZE(axp192_volatile_ranges),
>> +};
>> +
>>  /* AXP22x ranges are shared with the AXP809, as they cover the same range */
>>  static const struct regmap_range axp22x_writeable_ranges[] = {
>>  	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
>> @@ -173,6 +203,25 @@ static const struct resource axp152_pek_resources[] = {
>>  	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
>>  };
>>  
>> +static const struct resource axp192_gpio_resources[] = {
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO0_INPUT, "GPIO0"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO1_INPUT, "GPIO1"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO2_INPUT, "GPIO2"),
>> +};
>> +
>> +static const struct resource axp192_ac_power_supply_resources[] = {
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
>> +};
>> +
>> +static const struct resource axp192_usb_power_supply_resources[] = {
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
>> +	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
>> +};
>> +
>>  static const struct resource axp20x_ac_power_supply_resources[] = {
>>  	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
>>  	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
>> @@ -245,6 +294,15 @@ static const struct regmap_config axp152_regmap_config = {
>>  	.cache_type	= REGCACHE_RBTREE,
>>  };
>>  
>> +static const struct regmap_config axp192_regmap_config = {
>> +	.reg_bits	= 8,
>> +	.val_bits	= 8,
>> +	.wr_table	= &axp192_writeable_table,
>> +	.volatile_table	= &axp192_volatile_table,
>> +	.max_register	= AXP20X_CC_CTRL,
>> +	.cache_type	= REGCACHE_RBTREE,
>> +};
>> +
>>  static const struct regmap_config axp20x_regmap_config = {
>>  	.reg_bits	= 8,
>>  	.val_bits	= 8,
>> @@ -304,6 +362,55 @@ static const struct regmap_irq axp152_regmap_irqs[] = {
>>  	INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,		2, 0),
>>  };
>>  
>> +static const struct regmap_irq axp192_regmap_irqs[] = {
>> +	INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V,		0, 7),
>> +	INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN,		0, 6),
>> +	INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL,		0, 5),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V,		0, 4),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN,		0, 3),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL,		0, 2),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW,		0, 1),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN,		1, 7),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL,	        1, 6),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE,	1, 5),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE,	1, 4),
>> +	INIT_REGMAP_IRQ(AXP192, CHARG,		        1, 3),
>> +	INIT_REGMAP_IRQ(AXP192, CHARG_DONE,		1, 2),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH,	        1, 1),
>> +	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW,	        1, 0),
>> +	INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH,	        2, 7),
>> +	INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW,		2, 6),
>> +	INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG,	        2, 5),
>> +	INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG,	        2, 4),
>> +	INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG,	        2, 3),
>> +	INIT_REGMAP_IRQ(AXP192, PEK_SHORT,		2, 1),
>> +	INIT_REGMAP_IRQ(AXP192, PEK_LONG,		2, 0),
>> +	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON,		3, 7),
>> +	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF,	        3, 6),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_VALID,		3, 5),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID,	        3, 4),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID,	3, 3),
>> +	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END,	        3, 2),
>> +	INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL,	        3, 0),
>> +	INIT_REGMAP_IRQ(AXP192, TIMER,			4, 7),
>> +	INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT,		4, 2),
>> +	INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT,		4, 1),
>> +	INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT,		4, 0),
>> +};
>> +
>> +static int axp192_get_irq_reg(unsigned int base_reg, int i)
>
> Nit: If you have to respin this set, please rename 'i'.
>
> Unless used as an iterator, 'i' is a terrible variable name.
>

Ack. I had to rework the regmap changes and split them out to their
own series, so I'll fix this when I rebase.

>> +{
>> +	/* linear mapping for IRQ1 to IRQ4 */
>> +	if (i < 4)
>> +		return base_reg + i;
>> +
>> +	/* handle IRQ5 separately */
>> +	if (base_reg == AXP192_IRQ1_EN)
>> +		return AXP192_IRQ5_EN;
>> +	else
>> +		return AXP192_IRQ5_STATE;
>> +}
>> +
>>  static const struct regmap_irq axp20x_regmap_irqs[] = {
>>  	INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7),
>>  	INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6),
>> @@ -514,6 +621,19 @@ static const struct regmap_irq_chip axp152_regmap_irq_chip = {
>>  	.num_regs		= 3,
>>  };
>>  
>> +static const struct regmap_irq_chip axp192_regmap_irq_chip = {
>> +	.name			= "axp192_irq_chip",
>> +	.status_base		= AXP192_IRQ1_STATE,
>> +	.ack_base		= AXP192_IRQ1_STATE,
>> +	.mask_base		= AXP192_IRQ1_EN,
>> +	.mask_invert		= true,
>> +	.init_ack_masked	= true,
>> +	.irqs			= axp192_regmap_irqs,
>> +	.num_irqs		= ARRAY_SIZE(axp192_regmap_irqs),
>> +	.num_regs		= 5,
>> +	.get_irq_reg		= axp192_get_irq_reg,
>> +};
>> +
>>  static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
>>  	.name			= "axp20x_irq_chip",
>>  	.status_base		= AXP20X_IRQ1_STATE,
>> @@ -588,6 +708,30 @@ static const struct regmap_irq_chip axp809_regmap_irq_chip = {
>>  	.num_regs		= 5,
>>  };
>>  
>> +static const struct mfd_cell axp192_cells[] = {
>> +	{
>> +		.name		= "axp192-gpio",
>> +		.of_compatible	= "x-powers,axp192-gpio",
>> +		.num_resources	= ARRAY_SIZE(axp192_gpio_resources),
>> +		.resources	= axp192_gpio_resources,
>> +	}, {
>> +		.name		= "axp20x-regulator",
>
> Nit: Is it possible to put one line entries at the bottom?
>
> And format like this:
>
>     { .name = "axp20x-regulator" }
>

OK.

>> +	}, {
>> +		.name		= "axp192-adc",
>> +		.of_compatible	= "x-powers,axp192-adc",
>> +	}, {
>> +		.name		= "axp20x-ac-power-supply",
>> +		.of_compatible	= "x-powers,axp202-ac-power-supply",
>> +		.num_resources	= ARRAY_SIZE(axp192_ac_power_supply_resources),
>> +		.resources	= axp192_ac_power_supply_resources,
>> +	}, {
>> +		.name		= "axp20x-usb-power-supply",
>> +		.of_compatible	= "x-powers,axp192-usb-power-supply",
>> +		.num_resources	= ARRAY_SIZE(axp192_usb_power_supply_resources),
>> +		.resources	= axp192_usb_power_supply_resources,
>> +	}
>> +};
>
> For my own reference (apply this as-is to your sign-off block):
>
>   Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

Thanks!

Regards, Aidan
diff mbox series

Patch

diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index 00ab48018d8d..9ada58fad77f 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -62,6 +62,7 @@  static int axp20x_i2c_remove(struct i2c_client *i2c)
 #ifdef CONFIG_OF
 static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
+	{ .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
 	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
@@ -75,6 +76,7 @@  MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
 
 static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp152", 0 },
+	{ "axp192", 0 },
 	{ "axp202", 0 },
 	{ "axp209", 0 },
 	{ "axp221", 0 },
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 8161a5dc68e8..7f64e5c83fe2 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -34,6 +34,7 @@ 
 
 static const char * const axp20x_model_names[] = {
 	"AXP152",
+	"AXP192",
 	"AXP202",
 	"AXP209",
 	"AXP221",
@@ -92,6 +93,35 @@  static const struct regmap_access_table axp20x_volatile_table = {
 	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
 };
 
+static const struct regmap_range axp192_writeable_ranges[] = {
+	regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
+	regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
+	regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
+	regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_range axp192_volatile_ranges[] = {
+	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
+	regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
+	regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
+	regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
+	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
+	regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
+	regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
+	regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
+	regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
+};
+
+static const struct regmap_access_table axp192_writeable_table = {
+	.yes_ranges	= axp192_writeable_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp192_writeable_ranges),
+};
+
+static const struct regmap_access_table axp192_volatile_table = {
+	.yes_ranges	= axp192_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp192_volatile_ranges),
+};
+
 /* AXP22x ranges are shared with the AXP809, as they cover the same range */
 static const struct regmap_range axp22x_writeable_ranges[] = {
 	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
@@ -173,6 +203,25 @@  static const struct resource axp152_pek_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
 };
 
+static const struct resource axp192_gpio_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO0_INPUT, "GPIO0"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO1_INPUT, "GPIO1"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_GPIO2_INPUT, "GPIO2"),
+};
+
+static const struct resource axp192_ac_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
+};
+
+static const struct resource axp192_usb_power_supply_resources[] = {
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
+};
+
 static const struct resource axp20x_ac_power_supply_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
 	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
@@ -245,6 +294,15 @@  static const struct regmap_config axp152_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
+static const struct regmap_config axp192_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.wr_table	= &axp192_writeable_table,
+	.volatile_table	= &axp192_volatile_table,
+	.max_register	= AXP20X_CC_CTRL,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
 static const struct regmap_config axp20x_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@@ -304,6 +362,55 @@  static const struct regmap_irq axp152_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,		2, 0),
 };
 
+static const struct regmap_irq axp192_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V,		0, 7),
+	INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN,		0, 6),
+	INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL,		0, 5),
+	INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V,		0, 4),
+	INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN,		0, 3),
+	INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL,		0, 2),
+	INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW,		0, 1),
+	INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN,		1, 7),
+	INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL,	        1, 6),
+	INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE,	1, 5),
+	INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE,	1, 4),
+	INIT_REGMAP_IRQ(AXP192, CHARG,		        1, 3),
+	INIT_REGMAP_IRQ(AXP192, CHARG_DONE,		1, 2),
+	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH,	        1, 1),
+	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW,	        1, 0),
+	INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH,	        2, 7),
+	INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW,		2, 6),
+	INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG,	        2, 5),
+	INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG,	        2, 4),
+	INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG,	        2, 3),
+	INIT_REGMAP_IRQ(AXP192, PEK_SHORT,		2, 1),
+	INIT_REGMAP_IRQ(AXP192, PEK_LONG,		2, 0),
+	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON,		3, 7),
+	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF,	        3, 6),
+	INIT_REGMAP_IRQ(AXP192, VBUS_VALID,		3, 5),
+	INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID,	        3, 4),
+	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID,	3, 3),
+	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END,	        3, 2),
+	INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL,	        3, 0),
+	INIT_REGMAP_IRQ(AXP192, TIMER,			4, 7),
+	INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT,		4, 2),
+	INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT,		4, 1),
+	INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT,		4, 0),
+};
+
+static int axp192_get_irq_reg(unsigned int base_reg, int i)
+{
+	/* linear mapping for IRQ1 to IRQ4 */
+	if (i < 4)
+		return base_reg + i;
+
+	/* handle IRQ5 separately */
+	if (base_reg == AXP192_IRQ1_EN)
+		return AXP192_IRQ5_EN;
+	else
+		return AXP192_IRQ5_STATE;
+}
+
 static const struct regmap_irq axp20x_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7),
 	INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6),
@@ -514,6 +621,19 @@  static const struct regmap_irq_chip axp152_regmap_irq_chip = {
 	.num_regs		= 3,
 };
 
+static const struct regmap_irq_chip axp192_regmap_irq_chip = {
+	.name			= "axp192_irq_chip",
+	.status_base		= AXP192_IRQ1_STATE,
+	.ack_base		= AXP192_IRQ1_STATE,
+	.mask_base		= AXP192_IRQ1_EN,
+	.mask_invert		= true,
+	.init_ack_masked	= true,
+	.irqs			= axp192_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp192_regmap_irqs),
+	.num_regs		= 5,
+	.get_irq_reg		= axp192_get_irq_reg,
+};
+
 static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
 	.name			= "axp20x_irq_chip",
 	.status_base		= AXP20X_IRQ1_STATE,
@@ -588,6 +708,30 @@  static const struct regmap_irq_chip axp809_regmap_irq_chip = {
 	.num_regs		= 5,
 };
 
+static const struct mfd_cell axp192_cells[] = {
+	{
+		.name		= "axp192-gpio",
+		.of_compatible	= "x-powers,axp192-gpio",
+		.num_resources	= ARRAY_SIZE(axp192_gpio_resources),
+		.resources	= axp192_gpio_resources,
+	}, {
+		.name		= "axp20x-regulator",
+	}, {
+		.name		= "axp192-adc",
+		.of_compatible	= "x-powers,axp192-adc",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp202-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp192_ac_power_supply_resources),
+		.resources	= axp192_ac_power_supply_resources,
+	}, {
+		.name		= "axp20x-usb-power-supply",
+		.of_compatible	= "x-powers,axp192-usb-power-supply",
+		.num_resources	= ARRAY_SIZE(axp192_usb_power_supply_resources),
+		.resources	= axp192_usb_power_supply_resources,
+	}
+};
+
 static const struct mfd_cell axp20x_cells[] = {
 	{
 		.name		= "axp20x-gpio",
@@ -865,6 +1009,12 @@  int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_cfg = &axp152_regmap_config;
 		axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
 		break;
+	case AXP192_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp192_cells);
+		axp20x->cells = axp192_cells;
+		axp20x->regmap_cfg = &axp192_regmap_config;
+		axp20x->regmap_irq_chip = &axp192_regmap_irq_chip;
+		break;
 	case AXP202_ID:
 	case AXP209_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 9ab0e2fca7ea..18546e124919 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -12,6 +12,7 @@ 
 
 enum axp20x_variants {
 	AXP152_ID = 0,
+	AXP192_ID,
 	AXP202_ID,
 	AXP209_ID,
 	AXP221_ID,
@@ -24,6 +25,7 @@  enum axp20x_variants {
 	NR_AXP20X_VARIANTS,
 };
 
+#define AXP192_DATACACHE(m)		(0x06 + (m))
 #define AXP20X_DATACACHE(m)		(0x04 + (m))
 
 /* Power supply */
@@ -45,6 +47,13 @@  enum axp20x_variants {
 #define AXP152_DCDC_FREQ		0x37
 #define AXP152_DCDC_MODE		0x80
 
+#define AXP192_USB_OTG_STATUS		0x04
+#define AXP192_PWR_OUT_CTRL		0x12
+#define AXP192_DCDC2_V_OUT		0x23
+#define AXP192_DCDC1_V_OUT		0x26
+#define AXP192_DCDC3_V_OUT		0x27
+#define AXP192_LDO2_3_V_OUT		0x28
+
 #define AXP20X_PWR_INPUT_STATUS		0x00
 #define AXP20X_PWR_OP_MODE		0x01
 #define AXP20X_USB_OTG_STATUS		0x02
@@ -139,6 +148,17 @@  enum axp20x_variants {
 #define AXP152_IRQ2_STATE		0x49
 #define AXP152_IRQ3_STATE		0x4a
 
+#define AXP192_IRQ1_EN			0x40
+#define AXP192_IRQ2_EN			0x41
+#define AXP192_IRQ3_EN			0x42
+#define AXP192_IRQ4_EN			0x43
+#define AXP192_IRQ1_STATE		0x44
+#define AXP192_IRQ2_STATE		0x45
+#define AXP192_IRQ3_STATE		0x46
+#define AXP192_IRQ4_STATE		0x47
+#define AXP192_IRQ5_EN			0x4a
+#define AXP192_IRQ5_STATE		0x4d
+
 #define AXP20X_IRQ1_EN			0x40
 #define AXP20X_IRQ2_EN			0x41
 #define AXP20X_IRQ3_EN			0x42
@@ -153,6 +173,11 @@  enum axp20x_variants {
 #define AXP20X_IRQ6_STATE		0x4d
 
 /* ADC */
+#define AXP192_GPIO2_V_ADC_H		0x68
+#define AXP192_GPIO2_V_ADC_L		0x69
+#define AXP192_GPIO3_V_ADC_H		0x6a
+#define AXP192_GPIO3_V_ADC_L		0x6b
+
 #define AXP20X_ACIN_V_ADC_H		0x56
 #define AXP20X_ACIN_V_ADC_L		0x57
 #define AXP20X_ACIN_I_ADC_H		0x58
@@ -182,6 +207,8 @@  enum axp20x_variants {
 #define AXP20X_IPSOUT_V_HIGH_L		0x7f
 
 /* Power supply */
+#define AXP192_GPIO30_IN_RANGE		0x85
+
 #define AXP20X_DCDC_MODE		0x80
 #define AXP20X_ADC_EN1			0x82
 #define AXP20X_ADC_EN2			0x83
@@ -210,6 +237,16 @@  enum axp20x_variants {
 #define AXP152_PWM1_FREQ_Y		0x9c
 #define AXP152_PWM1_DUTY_CYCLE		0x9d
 
+#define AXP192_GPIO0_CTRL		0x90
+#define AXP192_LDO_IO0_V_OUT		0x91
+#define AXP192_GPIO1_CTRL		0x92
+#define AXP192_GPIO2_CTRL		0x93
+#define AXP192_GPIO2_0_STATE		0x94
+#define AXP192_GPIO4_3_CTRL		0x95
+#define AXP192_GPIO4_3_STATE		0x96
+#define AXP192_GPIO2_0_PULL		0x97
+#define AXP192_N_RSTO_CTRL		0x9e
+
 #define AXP20X_GPIO0_CTRL		0x90
 #define AXP20X_LDO5_V_OUT		0x91
 #define AXP20X_GPIO1_CTRL		0x92
@@ -287,6 +324,17 @@  enum axp20x_variants {
 #define AXP288_FG_TUNE5             0xed
 
 /* Regulators IDs */
+enum {
+	AXP192_DCDC1 = 0,
+	AXP192_DCDC2,
+	AXP192_DCDC3,
+	AXP192_LDO1,
+	AXP192_LDO2,
+	AXP192_LDO3,
+	AXP192_LDO_IO0,
+	AXP192_REG_ID_MAX,
+};
+
 enum {
 	AXP20X_LDO1 = 0,
 	AXP20X_LDO2,
@@ -440,6 +488,42 @@  enum {
 	AXP152_IRQ_GPIO0_INPUT,
 };
 
+enum axp192_irqs {
+	AXP192_IRQ_ACIN_OVER_V = 1,
+	AXP192_IRQ_ACIN_PLUGIN,
+	AXP192_IRQ_ACIN_REMOVAL,
+	AXP192_IRQ_VBUS_OVER_V,
+	AXP192_IRQ_VBUS_PLUGIN,
+	AXP192_IRQ_VBUS_REMOVAL,
+	AXP192_IRQ_VBUS_V_LOW,
+	AXP192_IRQ_BATT_PLUGIN,
+	AXP192_IRQ_BATT_REMOVAL,
+	AXP192_IRQ_BATT_ENT_ACT_MODE,
+	AXP192_IRQ_BATT_EXIT_ACT_MODE,
+	AXP192_IRQ_CHARG,
+	AXP192_IRQ_CHARG_DONE,
+	AXP192_IRQ_BATT_TEMP_HIGH,
+	AXP192_IRQ_BATT_TEMP_LOW,
+	AXP192_IRQ_DIE_TEMP_HIGH,
+	AXP192_IRQ_CHARG_I_LOW,
+	AXP192_IRQ_DCDC1_V_LONG,
+	AXP192_IRQ_DCDC2_V_LONG,
+	AXP192_IRQ_DCDC3_V_LONG,
+	AXP192_IRQ_PEK_SHORT = 22,
+	AXP192_IRQ_PEK_LONG,
+	AXP192_IRQ_N_OE_PWR_ON,
+	AXP192_IRQ_N_OE_PWR_OFF,
+	AXP192_IRQ_VBUS_VALID,
+	AXP192_IRQ_VBUS_NOT_VALID,
+	AXP192_IRQ_VBUS_SESS_VALID,
+	AXP192_IRQ_VBUS_SESS_END,
+	AXP192_IRQ_LOW_PWR_LVL = 31,
+	AXP192_IRQ_TIMER,
+	AXP192_IRQ_GPIO2_INPUT = 37,
+	AXP192_IRQ_GPIO1_INPUT,
+	AXP192_IRQ_GPIO0_INPUT,
+};
+
 enum {
 	AXP20X_IRQ_ACIN_OVER_V = 1,
 	AXP20X_IRQ_ACIN_PLUGIN,