new file mode 100644
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot addition to handle Qualcomm Robotics RB3 Development Platform
+ * (dragonboard845c) pins
+ *
+ * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
+ */
+
+/
+{
+ soc {
+ u-boot,dm-pre-reloc;
+
+ serial@a84000 {
+ u-boot,dm-pre-reloc;
+ };
+
+ clock-controller@100000 {
+ u-boot,dm-pre-reloc;
+ };
+
+ pinctrl_north@3900000 {
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
+
+&pm8998_pon {
+ key_vol_down {
+ gpios = <&pm8998_pon 1 0>;
+ label = "key_vol_down";
+ };
+ key_power {
+ gpios = <&pm8998_pon 0 0>;
+ label = "key_power";
+ };
+};
new file mode 100644
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm Robotics RB3 Development (dragonboard845c) board device
+ * tree source
+ *
+ * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845.dtsi"
+
+/ {
+ model = "Thundercomm Dragonboard 845c";
+ compatible = "thundercomm,db845c", "qcom,sdm845";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &debug_uart;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x80000000 0 0xfdfa0000>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ serial@a84000 {
+ status = "okay";
+ };
+ };
+};
+
+#include "dragonboard845c-uboot.dtsi"
@@ -44,6 +44,19 @@ config TARGET_DRAGONBOARD820C
- 3GiB RAM
- 32GiB UFS drive
+config TARGET_DRAGONBOARD845C
+ bool "96Boards Dragonboard 845C"
+ help
+ Support for 96Boards Dragonboard 845C aka Robotics RB3 Development
+ Platform. This board complies with 96Board Open Platform
+ Specifications. Features:
+ - Qualcomm Snapdragon SDA845 SoC
+ - 4GiB RAM
+ - 64GiB UFS drive
+ select MISC_INIT_R
+ select SDM845
+ select DM_ETH if NET
+
config TARGET_STARQLTECHN
bool "Samsung S9 SM-G9600(starqltechn)"
help
@@ -60,6 +73,7 @@ endchoice
source "board/qualcomm/dragonboard410c/Kconfig"
source "board/qualcomm/dragonboard820c/Kconfig"
+source "board/qualcomm/dragonboard845c/Kconfig"
source "board/samsung/starqltechn/Kconfig"
endif
new file mode 100644
@@ -0,0 +1,12 @@
+if TARGET_DRAGONBOARD845C
+
+config SYS_BOARD
+ default "dragonboard845c"
+
+config SYS_CONFIG_NAME
+ default "dragonboard845c"
+
+config SYS_VENDOR
+ default "qualcomm"
+
+endif
new file mode 100644
@@ -0,0 +1,6 @@
+Qualcomm Robotics RB3 Development Platform (dragonboard845c)
+M: Sumit Garg <sumit.garg@linaro.org>
+S: Maintained
+F: board/qualcomm/dragonboard845c/
+F: include/configs/dragonboard845c.h
+F: configs/dragonboard845c_defconfig
new file mode 100644
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
+#
+# This empty file prevents make error.
+# Board logic defined in board/qualcomm/common/sdm845.c, no custom logic for dragonboard845c so far.
+#
+
+obj-y += dragonboard845c.o
new file mode 100644
@@ -0,0 +1,63 @@
+/*
+ * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
+ */
+
+/dts-v1/;
+
+/ {
+ description = "Various kernels, ramdisks and FDT blobs";
+ #address-cells = <1>;
+
+ images {
+ kernel-1 {
+ description = "5.15.0-qcomlt-arm64";
+ data = /incbin/("./db845c_imgs/Image.gz--5.15-r0-dragonboard-845c-20211218193034-511.bin");
+ type = "kernel";
+ arch = "arm64";
+ os = "linux";
+ compression = "gzip";
+ load = <0x80000000>;
+ entry = <0x80000000>;
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+
+ ramdisk-1 {
+ description = "initramfs-test-full-image-dragonboard-845c";
+ data = /incbin/("./db845c_imgs/initramfs-test-full-image-dragonboard-845c-20211218193034-511.rootfs.cpio.gz");
+ type = "ramdisk";
+ arch = "arm64";
+ os = "linux";
+ compression = "gzip";
+ load = <00000000>;
+ entry = <00000000>;
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+
+ fdt-1 {
+ description = "sdm845-db845c-fdt";
+ data = /incbin/("./db845c_imgs/sdm845-db845c--5.15-r0-dragonboard-845c-20211218193034.dtb");
+ type = "flat_dt";
+ arch = "arm64";
+ compression = "none";
+ hash-1 {
+ algo = "sha1";
+ };
+ };
+
+ };
+
+ configurations {
+ default = "config-1";
+
+ config-1 {
+ description = "db845c kernel-5.15.0 configuration";
+ kernel = "kernel-1";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-1";
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This empty file prevents make linking error.
+ * No custom logic for dragonboard845c so far.
+ *
+ * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
+ */
+
+void noop(void) {}
new file mode 100644
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_COUNTER_FREQUENCY=19000000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_SNAPDRAGON=y
+CONFIG_DEFAULT_DEVICE_TREE="dragonboard845c"
+CONFIG_TARGET_DRAGONBOARD845C=y
+CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 845C"
+CONFIG_SYS_LOAD_ADDR=0x80000000
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=5
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_BMP=y
+# CONFIG_NET is not set
+CONFIG_CLK=y
+CONFIG_MSM_GPIO=y
+CONFIG_PM8916_GPIO=y
+CONFIG_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_PM8916=y
+CONFIG_MSM_GENI_SERIAL=y
+CONFIG_SPMI_MSM=y
+CONFIG_LMB_MAX_REGIONS=64
@@ -35,9 +35,25 @@ Pack android boot image
^^^^^^^^^^^^^^^^^^^^^^^
We'll assemble android boot image with ``u-boot.bin`` instead of linux kernel,
and FIT image instead of ``initramfs``. Android bootloader expect gzipped kernel
-with appended dtb, so let's mimic linux to satisfy stock bootloader:
+with appended dtb, so let's mimic linux to satisfy stock bootloader.
-- create dump dtb::
+Boards
+------------
+starqlte
+^^^^^^^^^^^^
+
+The starqltechn is a production board for Samsung S9 (SM-G9600) phone,
+based on the Qualcomm SDM845 SoC.
+
+Steps:
+
+- Build u-boot::
+
+ $ export CROSS_COMPILE=<aarch64 toolchain prefix>
+ $ make starqltechn_defconfig
+ $ make
+
+- Create dump dtb::
workdir=/tmp/prepare_payload
mkdir -p "$workdir"
@@ -56,10 +72,15 @@ with appended dtb, so let's mimic linux to satisfy stock bootloader:
};
EOF
-- gzip u-boot ``gzip u-boot.bin``
-- append dtb to gzipped u-boot: ``cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb``
+- gzip u-boot::
+
+ gzip u-boot.bin
-Now we've got everything to build android boot image:::
+- Append dtb to gzipped u-boot::
+
+ cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb
+
+- Now we've got everything to build android boot image::
mkbootimg --base 0x0 --kernel_offset 0x00008000 \
--ramdisk_offset 0x02000000 --tags_offset 0x01e00000 \
@@ -68,16 +89,69 @@ Now we've got everything to build android boot image:::
--kernel u-boot.bin.gz-dtb \
-o boot.img
-Flash image with your phone's flashing method.
+- Flash image with your phone's flashing method.
-Boards
-------------
-starqlte
-^^^^^^^^^^^^
+More information can be found on the `Samsung S9 page`_.
-The starqltechn is a production board for Samsung S9 (SM-G9600) phone,
-based on the Qualcomm SDM845 SoC.
+dragonboard845c
+^^^^^^^^^^^^^^^
-More information can be found on the `Samsung S9 page`_.
+The dragonboard845c is a Qualcomm Robotics RB3 Development Platform, based on
+the Qualcomm SDM845 SoC.
+
+Steps:
+
+- Build u-boot::
+
+ $ export CROSS_COMPILE=<aarch64 toolchain prefix>
+ $ make dragonboard845c_defconfig
+ $ make
+
+- Create dummy dtb::
+
+ workdir=/tmp/prepare_payload
+ mkdir -p "$workdir"
+ mock_dtb="$workdir"/payload_mock.dtb
+
+ dtc -I dts -O dtb -o "$mock_dtb" << EOF
+ /dts-v1/;
+ / {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ chosen { };
+ };
+ EOF
+
+- gzip u-boot::
+
+ gzip u-boot.bin
+
+- Append dtb to gzipped u-boot::
+
+ cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb
+
+- A ``db845c.its`` file can be found in ``board/qualcomm/dragonboard845c/``
+ directory. It expects a folder as ``db845c_imgs/`` in the main directory
+ containing pre-built kernel, dts and ramdisk images. See ``db845c.its``
+ for full path to images::
+
+ mkimage -f db845c.its db845c.itb
+
+- Now we've got everything to build android boot image::
+
+ mkbootimg --kernel u-boot.bin.gz-dtb --ramdisk db845c.itb \
+ --output boot.img --pagesize 4096 --base 0x80000000
+
+- Flash boot.img using db845c fastboot method.
+
+More information can be found on the `DragonBoard 845c page`_.
.. _Samsung S9 page: https://en.wikipedia.org/wiki/Samsung_Galaxy_S9
+.. _DragonBoard 845c page: https://www.96boards.org/product/rb3-platform/
new file mode 100644
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration file for Dragonboard 845c, based on Qualcomm SDA845 chip
+ *
+ * (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
+ */
+
+#ifndef __CONFIGS_SDM845_H
+#define __CONFIGS_SDM845_H
+
+#include <linux/sizes.h>
+#include <asm/arch/sysmap-sdm845.h>
+
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x5000000\0" \
+ "bootm_low=0x80000000\0" \
+ "bootcmd=bootm $prevbl_initrd_start_addr\0"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_BOOTM_LEN SZ_64M
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_MAXARGS 64
+
+#endif
Add support for 96Boards Dragonboard 845C aka Robotics RB3 development platform. This board complies with 96Boards Open Platform Specifications. Features: - Qualcomm Snapdragon SDA845 SoC - 4GiB RAM - 64GiB UFS drive U-boot is chain loaded by ABL in 64-bit mode as part of boot.img. For detailed build and boot instructions, refer to doc/board/qualcomm/sdm845.rst, board: dragonboard845c. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> --- arch/arm/dts/dragonboard845c-uboot.dtsi | 37 +++++++ arch/arm/dts/dragonboard845c.dts | 44 ++++++++ arch/arm/mach-snapdragon/Kconfig | 14 +++ board/qualcomm/dragonboard845c/Kconfig | 12 +++ board/qualcomm/dragonboard845c/MAINTAINERS | 6 ++ board/qualcomm/dragonboard845c/Makefile | 9 ++ board/qualcomm/dragonboard845c/db845c.its | 63 +++++++++++ .../dragonboard845c/dragonboard845c.c | 9 ++ configs/dragonboard845c_defconfig | 28 +++++ doc/board/qualcomm/sdm845.rst | 100 +++++++++++++++--- include/configs/dragonboard845c.h | 28 +++++ 11 files changed, 337 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/dragonboard845c-uboot.dtsi create mode 100644 arch/arm/dts/dragonboard845c.dts create mode 100644 board/qualcomm/dragonboard845c/Kconfig create mode 100644 board/qualcomm/dragonboard845c/MAINTAINERS create mode 100644 board/qualcomm/dragonboard845c/Makefile create mode 100644 board/qualcomm/dragonboard845c/db845c.its create mode 100644 board/qualcomm/dragonboard845c/dragonboard845c.c create mode 100644 configs/dragonboard845c_defconfig create mode 100644 include/configs/dragonboard845c.h