mbox series

[v1,0/4] Add HiFive Unmatched LEDs

Message ID 20220705210143.315151-1-emil.renner.berthing@canonical.com
Headers show
Series Add HiFive Unmatched LEDs | expand

Message

Emil Renner Berthing July 5, 2022, 9:01 p.m. UTC
This series adds support for the two LEDs on the HiFive Unmatched
RISC-V board.

Emil Renner Berthing (4):
  leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
  dt-bindings: leds: pwm-multicolor: Add active-low property
  leds: pwm-multicolor: Support active-low LEDs
  riscv: dts: sifive unmatched: Add PWM controlled LEDs

 .../bindings/leds/leds-pwm-multicolor.yaml    |  4 ++
 .../boot/dts/sifive/hifive-unmatched-a00.dts  | 42 +++++++++++++++++++
 drivers/leds/rgb/leds-pwm-multicolor.c        |  8 +++-
 3 files changed, 52 insertions(+), 2 deletions(-)

Comments

Geert Uytterhoeven July 6, 2022, 7:33 a.m. UTC | #1
On Tue, Jul 5, 2022 at 11:01 PM Emil Renner Berthing
<emil.renner.berthing@canonical.com> wrote:
> Add the active-low property to LEDs that are part of a multicolor LED
> just like the regular PWM LEDs have.
>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Rob Herring July 6, 2022, 4:13 p.m. UTC | #2
On Tue, 05 Jul 2022 23:01:41 +0200, Emil Renner Berthing wrote:
> Add the active-low property to LEDs that are part of a multicolor LED
> just like the regular PWM LEDs have.
> 
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> ---
>  .../devicetree/bindings/leds/leds-pwm-multicolor.yaml         | 4 ++++
>  1 file changed, 4 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Pavel Machek July 17, 2022, 11:02 a.m. UTC | #3
Hi!

> This series adds support for the two LEDs on the HiFive Unmatched
> RISC-V board.
> 
> Emil Renner Berthing (4):
>   leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
>   dt-bindings: leds: pwm-multicolor: Add active-low property
>   leds: pwm-multicolor: Support active-low LEDs

Thank you, applied. Not taking the dts change

Best regards,
							Pavel
Palmer Dabbelt Aug. 11, 2022, 9:06 p.m. UTC | #4
On Sun, 17 Jul 2022 04:02:49 PDT (-0700), pavel@ucw.cz wrote:
> Hi!
>
>> This series adds support for the two LEDs on the HiFive Unmatched
>> RISC-V board.
>> 
>> Emil Renner Berthing (4):
>>   leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
>>   dt-bindings: leds: pwm-multicolor: Add active-low property
>>   leds: pwm-multicolor: Support active-low LEDs
>
> Thank you, applied. Not taking the dts change

I took the DTS change (#4) on riscv/for-next.  Thanks!