diff mbox series

[1/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC

Message ID 20220908080938.29199-1-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [1/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC | expand

Commit Message

Krzysztof Kozlowski Sept. 8, 2022, 8:09 a.m. UTC
GPIO controller nodes are named by convention just "gpio", not "gpios".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-pm8941.dtsi  | 2 +-
 arch/arm/boot/dts/qcom-pma8084.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring (Arm) Sept. 12, 2022, 9:41 p.m. UTC | #1
On Thu, 08 Sep 2022 10:09:38 +0200, Krzysztof Kozlowski wrote:
> GPIO controller nodes are named by convention just "gpio", not "gpios".
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Lee Jones Sept. 28, 2022, 9:41 a.m. UTC | #2
On Thu, 08 Sep 2022, Krzysztof Kozlowski wrote:

> GPIO controller nodes are named by convention just "gpio", not "gpios".
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

I guess I can't take this until the 2 arch/ patches are applied.
Lee Jones Oct. 24, 2022, 12:54 p.m. UTC | #3
On Thu, 08 Sep 2022, Krzysztof Kozlowski wrote:

> GPIO controller nodes are named by convention just "gpio", not "gpios".
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 9cd49deb9fa7..1ac477878c67 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -59,7 +59,7 @@  smbb: charger@1000 {
 			chg_otg: otg-vbus { };
 		};
 
-		pm8941_gpios: gpios@c000 {
+		pm8941_gpios: gpio@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e77602e9f95c..0da6c1a5d547 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@  pwrkey@800 {
 			bias-pull-up;
 		};
 
-		pma8084_gpios: gpios@c000 {
+		pma8084_gpios: gpio@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;