| Message ID | 20221014221138.7552-4-quic_molvera@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add base device tree files for QDU1000/QRU1000 | expand |
On 14/10/2022 18:11, Melody Olvera wrote: > Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 > SoCs. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 2 + > arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++ > 3 files changed, 462 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts > create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index d7669a7cee9f..8417295adfeb 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > new file mode 100644 > index 000000000000..47a8eaf4fda2 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > @@ -0,0 +1,230 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qdu1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; > + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + pm8150-regulators { regulators > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; > + vdd-l2-l10-supply = <&vph_pwr>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; > + vdd-l6-l9-supply = <&vreg_s6a_0p9>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; > + vdd-l13-l16-l17-supply = <&vph_pwr>; > + > + vreg_s2a_0p5: smps2 { > + regulator-name = "vreg_s2a_0p5"; > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <570000>; > + }; > + > + vreg_s3a_1p05: smps3 { > + regulator-name = "vreg_s3a_1p05"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1170000>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-name = "vreg_s5a_2p0"; > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_s6a_0p9: smps6 { > + regulator-name = "vreg_s6a_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s7a_1p2: smps7 { > + regulator-name = "vreg_s7a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vreg_s8a_1p3: smps8 { > + regulator-name = "vreg_s8a_1p3"; > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_l1a_0p91: ldo1 { > + regulator-name = "vreg_l1a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l2a_2p3: ldo2 { > + regulator-name = "vreg_l2a_2p3"; > + regulator-min-microvolt = <2970000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l3a_1p2: ldo3 { > + regulator-name = "vreg_l3a_1p2"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l5a_0p8: ldo5 { > + regulator-name = "vreg_l5a_0p8"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l6a_0p91: ldo6 { > + regulator-name = "vreg_l6a_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-name = "vreg_l7a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + > + }; > + > + vreg_l8a_0p91: ldo8 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <888000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l9a_0p91: ldo9 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l10a_2p95: ldo10 { > + regulator-name = "vreg_l10a_2p95"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l11a_0p91: ldo11 { > + regulator-name = "vreg_l11a_0p91"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <1950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l16a_1p8: ldo16 { > + regulator-name = "vreg_l16a_1p8"; > + regulator-min-microvolt = <1710000>; > + regulator-max-microvolt = <1890000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l17a_3p3: ldo17 { > + regulator-name = "vreg_l17a_3p3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l18a_1p2: ldo18 { > + regulator-name = "vreg_l18a_1p2"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&uart7 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > new file mode 100644 > index 000000000000..54770c697db8 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > @@ -0,0 +1,230 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qru1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; > + compatible = "qcom,qru1000-idp", "qcom,qru1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + pm8150-regulators { regulators Best regards, Krzysztof
Hi Melody,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.1-rc1 next-20221018]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Melody-Olvera/dt-bindings-arm-qcom-Document-QDU1000-QRU1000-SoCs-and-boards/20221017-130730
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link: https://lore.kernel.org/r/20221014221138.7552-4-quic_molvera%40quicinc.com
patch subject: [PATCH v2 3/3] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
config: arm64-allyesconfig
compiler: aarch64-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/713803878765e4e2e8e7801441d9b3094a89316f
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Melody-Olvera/dt-bindings-arm-qcom-Document-QDU1000-QRU1000-SoCs-and-boards/20221017-130730
git checkout 713803878765e4e2e8e7801441d9b3094a89316f
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
In file included from arch/arm64/boot/dts/qcom/qdu1000-idp.dts:9:
>> arch/arm64/boot/dts/qcom/qdu1000.dtsi:7:10: fatal error: dt-bindings/clock/qcom,gcc-qdu1000.h: No such file or directory
7 | #include <dt-bindings/clock/qcom,gcc-qdu1000.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
vim +7 arch/arm64/boot/dts/qcom/qdu1000.dtsi
ea267b70bd037f9 Melody Olvera 2022-10-14 @7 #include <dt-bindings/clock/qcom,gcc-qdu1000.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 8 #include <dt-bindings/clock/qcom,rpmh.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 9 #include <dt-bindings/dma/qcom-gpi.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 10 #include <dt-bindings/interconnect/qcom,qdu1000.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 11 #include <dt-bindings/power/qcom-rpmpd.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 12 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
ea267b70bd037f9 Melody Olvera 2022-10-14 13
On 19/10/2022 17:16, Melody Olvera wrote: > > > On 10/15/2022 6:29 AM, Krzysztof Kozlowski wrote: >> On 14/10/2022 18:11, Melody Olvera wrote: >>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 >>> SoCs. >>> >>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/Makefile | 2 + >>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++ >>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++ >>> 3 files changed, 462 insertions(+) >>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts >>> >>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile >>> index d7669a7cee9f..8417295adfeb 100644 >>> --- a/arch/arm64/boot/dts/qcom/Makefile >>> +++ b/arch/arm64/boot/dts/qcom/Makefile >>> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb >>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb >>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb >>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> new file mode 100644 >>> index 000000000000..47a8eaf4fda2 >>> --- /dev/null >>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts >>> @@ -0,0 +1,230 @@ >>> +// SPDX-License-Identifier: BSD-3-Clause >>> +/* >>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >>> + */ >>> + >>> +/dts-v1/; >>> + >>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> >>> +#include "qdu1000.dtsi" >>> +#include "pm8150.dtsi" >>> + >>> +/ { >>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; >>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; >>> + >>> + aliases { >>> + serial0 = &uart7; >>> + }; >>> + >>> + chosen { >>> + stdout-path = "serial0:115200n8"; >>> + }; >>> + >>> + ppvar_sys: ppvar-sys-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "ppvar_sys"; >>> + regulator-always-on; >>> + regulator-boot-on; >>> + }; >>> + >>> + vph_pwr: vph-pwr-regulator { >>> + compatible = "regulator-fixed"; >>> + regulator-name = "vph_pwr"; >>> + regulator-min-microvolt = <3700000>; >>> + regulator-max-microvolt = <3700000>; >>> + >>> + regulator-always-on; >>> + regulator-boot-on; >>> + >>> + vin-supply = <&ppvar_sys>; >>> + }; >>> +}; >>> + >>> +&apps_rsc { >>> + pm8150-regulators { >> regulators > Just 'regulators' as the node name isn't compliant with the bindings for rpmh-rsc devices. > Do the bindings need to be updated or should I leave this as is? If bindings expect this, I propose to change them. Which schema is expecting this? I already fixed SMD RPM: https://lore.kernel.org/all/20220926092104.111449-1-krzysztof.kozlowski@linaro.org/ Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d7669a7cee9f..8417295adfeb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts new file mode 100644 index 000000000000..47a8eaf4fda2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qdu1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + pm8150-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts new file mode 100644 index 000000000000..54770c697db8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qru1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; + compatible = "qcom,qru1000-idp", "qcom,qru1000"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + pm8150-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +};
Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 SoCs. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 230 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qru1000-idp.dts | 230 +++++++++++++++++++++++ 3 files changed, 462 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts